A bis(naphthalimide-piperazine) derivative (1) was synthesized as a pH-sensitive Off-On fluorescent probe. Operation mechanism of 1 is based on photo-induced electron transfer (PET) and its pH-dependent optical changes were investigated by using absorption and fluorescence spectroscopy. In the pH range of 11–4.5, this probe undergoes PET process from the piperazine to the naphthalimide moiety, leading to a fluorescence quenching. However, in the pH range of 4.5–1, the PET is inhibited to give a fluorescence enhancement. Moreover, the fluorescence ‘turn-on’ response of 1 is highly selective for protons (H+) over other metal cations, biomolecules and it shows a good reversibility between acidic and basic conditions.
The solvatochromic 9-hydroxybenzo[b]quinolizinium ion is shown to operate as fluorescent probe for the detection of water in acetonitrile. The dual fluorescence of this photoacid and its dependence on the content of water in the medium enable the ratiometric analysis of the fluorescence data.
In this paper, we report on the results of spectrofluorimetric study of new fluorescent sensor based on [Zn2L2] doped in ethyl cellulose. The sensor optical signal is based on the rapid fluorescence quenching in the presence of acetone vapor. The acetone vapor detection limit in a gas mixture by means of sensor based on [Zn2L2] doped in ethyl cellulose is 1.68 ppb. Being highly sensitive to the acetone acetone presence, instant in response and easy to use, the sensor can find an application for the noninvasive diagnostics of diabetes as well as for the monitoring of the content of acetone acetone in the air at industrial and laboratory facilities.
In this study the researcher reports a novel, one step synthesized rod-like nanoparticles of cerium (III)—tetraphenylporphyrin sandwich complex as a spectrofluorometric sensor to measure trace amount of Hg (II) and Cu (II) metal ions. Moreover, the synthesized fluorescent probe was able to detect higher amounts (>10?4 M) of Hg (II) in aqueous media by changing the color which can also be used as a selective mercury naked-eye sensor. The selectivity and sensitivity of the sensor based on its fluorescence quenching in the presence of Hg (II) and Cu (II) were studied according to the Stern-Volmer equation. The detection limit of the sensor was 16 nM for Hg (II) and about 2.34 μM for Cu (II) ions.
Hexadentate ligand L and its Ln3+ complexes EuLCl3 (1), TbLCl3 (2), SmLCl3 (3) are synthesised. All these complexes are well characterized for their photophysical properties such as luminescence lifetime decay(τ) and overall quantum yield(Φ). These complexes being water soluble, depicts their intense metal centred luminescence. Effect of pH on these complexes suggest that their emission intensities are stable in the pH range 4–9 and show their compatibility to function in the physiological pH.
New substituted thieno[3,2-c]pyridine derivatives 5 were synthesized by the reaction of 3-bromo-4-chlorothieno[3,2-c]pyridine 1 with cyclic amine 2, which further on Suzuki reaction with boronic acids 4 converted to corresponding 3-arylthieno[3,2-c]pyridine 5. Substituent R3 has predominant effect on fluorescence properties of thienopyridines. However, the electron donor amine at C4 has no effect on fluorescence properties of thienopyridines.
Graphical Abstract New thieno[3,2-c]pyridine derivatives were synthesized from 3-bromo-4-chlorothieno[3,2-c]pyridine and cyclic amines, which by on Suzuki reaction with boronic acids converted to corresponding 3-arylthieno[3,2-c]pyridine. Substituent R3 has predominant effect on fluorescence properties of thienopyridines. However, the electron donor amine at C4 has no effect on fluorescence properties of thienopyridines
Electronic absorption and emission spectra of 3-acetyl coumarin, 3-(bromoacetyl) coumarin and 3-(di bromoacetyl) coumarin have been recorded at room temperature in thirteen solvents with different polarities. Both ground and excited state dipole moments have been calculated for both locally excited and charge transfer transitions by using the solvatochromic method. Excited state dipole moments of all the three compounds are higher than their ground state values. DFT calculations have been profound to estimate their ground and excited state dipole moments. The estimated change in dipole moment by the application of microscopic solvent polarity parameter and bulk solvent polarity methods are in close agreement. Concentration dependent dual fluorescence has been observed in the emission spectra of all the three compounds.
Water soluble perylenediimide based fluorophore salt, N,N′-bis(ethelenetrimethyl ammoniumiodide)-perylene-3,4,9,10-tetracarboxylicbisimide (PDI-1), has been used for selective fluorescence sensing of picric acid (PA) and 4-nitroaniline (4-NA) in organic as well as aqueous medium across wide pH range (1.0 to 10.0). PDI-1 showed strong fluorescence in dimethylformamide (DMF) (Φf?=?0.26 (DMF) and moderate fluorescence in water. Addition of picric acid (PA) and 4-nitroaniline (4-NA) into PDI-1 in DMF/aqueous solution selectively quenches the fluorescence. The concentration dependent studies showed decrease of fluorescence linearly with increase of PA and 4-NA concentration. The interference studies demonstrate high selectivity for PA and 4-NA. Interestingly, PDI-1 showed selective fluorescence sensing of PA and 4-NA across wide pH range (1.0 to 10.0). Selective fluorescence sensing of PA and 4-NA has also been observed with trifluoroacetate (PDI-2), sulfate (PDI-3) salt of PDI-1 as well as octyl chain substituted PDI (PDI-4) without amine functionality. These studies suggest that PA and 4-NA might be having preferential interaction with PDI aromatic core and quenches the fluorescence. Thus PDI based dyes have been used for selective fluorescent sensing of explosive NACs for the first time to the best our knowledge.
A new efficient chemosensor 1 was prepared, for the detection of Fe3+ in solutions as a colorimetric and fluorescent sensor. The visual and fluorescent behaviors of the receptor toward various metal ions were also explored. The receptor shows exclusive response toward Fe3+ ions and also distinguishes Fe3+ from other cations by color change and fluorescence enhancement in hydroalcoholic solution (MeOH/H2O = 9/1, v/v). Thus, the receptor can be used as a colorometric and fluorescent sensor for the determination of Fe3+ ion. The fluorescence microscopy experiments showed that the chemosensor is efficient for detection of Fe3+ in vitro, developing a good image of the biological organelles.
In designing of novel insect growth regulators (IGRs), biologically occurring carvacrol has been structurally modified to thiadiazole and oxadiazole moieties. Two series of carvacrol analogs containing 1,3,4-thiadiazole (VIIIa–e) and 1,3,4-oxadiazole (IXa–e) derivatives are designed and synthesized. Their structures are confirmed by FT-IR, \(^{1}\text {H}\) NMR, \(^{13}\)C NMR and LC-MS. IGR activity is tested against Spodoptera litura. Several analogs displayed IGR activity against this insect pest. Compounds VIIIe and IXe displayed relatively good IGR activity with \(\text {GI}_{50 }\)values 117.43 and 108.83 ppm against Spodoptera litura, respectively.
Graphical Abstract
Synthesis, characterization and evaluation of carvacrol-based 1,3,4-thiadiazole and 1,3,4-oxadiazole derivatives as potent insect growth regulators (IGRs).
A new type of fluorescent chemosensor based on tethered hexa-borondipyrromethene cyclotriphosphazene platform (HBTC) linked via triazole groups was designed and synthesized. Its sensing behavior toward metal ions was investigated by ultraviolet-visible and fluorescence spectroscopies. Addition of a Fe2+ ion to a tetrahydrofuran solution of HBTC gave a visual color change as well as a significantly quenched fluorescence emission, while other tested 19 metal ions induced no color or spectral changes. This compound was found to be highly selective and sensitive for Fe2+ with a low limit of detection (2.03 μM) which is, to the best of our knowledge, the superior than the previously studied chemosensors for Fe2+.
The 2,2′-dinaphtholazobenzene molecular framework (P) was designed, synthesized and characterized. Its absorption and fluorescence properties revealed that P is a dual sensor for copper ions (Cu2+) and fluoride ions (F?) in DMSO. The colorimetric activities were clearly visible by naked eye upon the addition of the two ions. Fluorescence quenching and enhancement were observed when Cu2+ and F? ions were added respectively. Density Functional Theory (DFT) calculations were carried out to provide an insight into the interaction of guest ions (Cu2+ and F?) with P, and to explain how the molecular orbitals were affected.
We report a dual fluorescent triazolylpyrene (TNDMBPy) as an efficient fluorescent light-up probe of various micellar microenvironments. The absorption spectra of TNDMBPy in an aqueous solution of varying surfactant concentration, CTAB, SDS and TX-100 showed that as the surfactant concentration was increased the absorbance increased with no shift in wavelength maxima. The increase of absorbance in each surfactant solution with increase in surfactant concentration was due to the enhanced solubilization of TNDMBPy in surfactant solutions. Our investigations based on steady state and time resolved fluorescence techniques showed that the probe reports the microenvironment of ionic surfactant solutions (CTAB and SDS) via dual emission (LE and ICT) at low surfactant concentration. The ICT band showed a blue shifting pattern with enhanced intensity that disappeared as the concentration of surfactant increases (> 1 mM for CTAB and > 3 mM for SDS). In non-ionic surfactant (Triton X-100) solution, the fluorophore showed dual emission with dominant ICT behaviour over LE emission at low concentration (up to 0.35 mM). In reverse micelle we observed a blue shifted ICT band with no LE band with increasing molar concentration of water. We found 100 nm blue shifting when we moved from R?=?0 to R?=?7, where R is the molar ratio of water to TX-100 (R?=?[H2O]/[TX-100]). The blue shifting of ICT band is because of the movement of the probe from hydrophilic core to hydrophobic core (surface) of the reverse micelle. Thus from the steady-state fluorescence study it was observed that the ICT band of the probe, TNDMBPy was more influenced by the micellar environment in comparison to the LE band. This difference in behaviour of the fluorophore is probably because of varying extent of hydrophobic/hydrogen bonding interactions experienced by the probe and its relative disposition inside the various micellar nanocores. 相似文献
Nanocomposites with thermo and photo-switchable fluorescent properties were synthesized via mini-emulsion polymerization based on spiropyran and methyl methacrylate monomer. The photophysical behavior of fluorescence nanocomposites was investigated by fluorescence spectrophotometry in different temperature, UV-light and time of exposure. It was found that methyl methacrylate polymer is capable of acting as a protective layer and play a critical role in improving the photostability of colorants. The nanocomposites exhibited excellent fluorescent thermo-switching action with respect to the free spiro molecule.
A novel version of the well-known and commercially successful Green Fluorescent Protein (GFP) variant known as EGFP, with an introduced E222H mutation, was produced in this laboratory. Given the current state of hypotheses about the role of glutamate 222, and the observed dominance of the phenolate absorption with an E222H variant observed from earlier study, the new mutant was considered a natural choice to investigate more fully the acid-base behavior of the chromophore in absorption and fluorescence. The bulk of this investigation concerns fitting the excitation, emission and absorption spectra to vibrational progressions of a novel ‘q-deformed’ type at various values of pH, and protein concentration. From these data, and from temperature-dependent fluorescence lifetime data and other experiments (with lanthanide doped gels into which H/EGFP is embedded), we construct a picture of excited inter- state conversion mechanisms, and quenching mechanisms, that attempts to explain many features of the GFP system.
Graphical Abstract Hypothetical proton current loop (orange) upon excitation; electron motion in purple H/EGFP. Solid boxes about waters project toward viewer, dashed boxes project away
Solvent free synthesis of 6,7-dihydroxy-3-(3-chlorophenyl) coumarin (CFHC) was designed and obtained by the interaction of 2-(2,4,5-trimethoxyphenyl)-1-(3-chlorophenyl)acrylonitrile with pyridinium hydrochloride in the presence of silica gel by using microwave irradiation. The characterization of CFHC was confirmed by FT-IR, 1H, 13C, 13C–APT and 2D HETCOR spectroscopy methods. The optical behavior of CFHC towards metal ions was investigated by UV-visible and fluorescence spectroscopy. CFHC showed “on–off” type fluorescence response towards Cu2+ with high selectivity in aqueous solution (CH3CN/H2O, 9/1, v/v). Once binding with Cu2+, CFHC-Cu2+ complex also displayed high selectivity for sulfide, resulting in “off–on” type sensing of sulfide anion.
Graphical abstract Visual fluorescence changes upon addition of various metal ions (5.0 eq.) to CFHC in CH3CN/H2O (90:10, v/v) under UV excitation (365 nm)
A label -free DNAzyme amplified biosensor is found to be highly selective and sensitive towards fluorescent detection of Pb2+ ions in aqueous media. The DNAzyme complex has designed by the hybridization of the enzyme and substrate strand. In the presence of Pb2+, the DNAzyme activated and cleaved the substrate strand of RNA site (rA) into two oligonucleotide fragments. Further, the free fragment was hybridized with a complementary strand on the surface of MBs. After magnetic separation, SYBER Green I was added and readily intercalate with the dsDNA to gives a bright fluorescence signal with intensity directly proportional to the concentration of Pb2+ions. A detection limit of 5 nM in Pb2+ the detection range 0 to 500 nM was obtained. This label- free fluorescent biosensor has been successfully applied to the determination of environmental water samples. Then results open up the possibility for real-time quantitative detection of Pb2+ with convenient potential applications in the biological and environmental field.
A series of five new terbium(III) ion complexes with 4,4-difluoro-1-phenylbutane-1,3-dione (HDPBD) and anciliary ligands was synthesized. The composition and properties of complexes were analyzed by elemental analysis, IR, NMR, powder X-ray diffaraction, TG-DTG and photoluminescence spectroscopy. These complexes exhibited ligand sensitized green emission at 546 nm associated with 5D4?→?7F5 transitions of terbium ion in the emission spectra. The photoluminescence study manifested that the organic ligands act as antenna and facilitate the absorbed energy to emitting levels of Tb(III) ion efficiently. The enhanced luminescence intensity and decay time of ternary C2-C5 complexes observed due to synergistic effect of anciliary ligands. The CIE color coordinates of complexes came under the green region of chromaticity diagram. The mechanistic investigation of intramolecular energy transfer in the complexes was discussed in detail. These terbium(III) complexes can be thrivingly used as one of the green component in light emitting material and in display devices.
Specific functionalized calix[4]arene based fluorescent chemosensor was synthesized for cations and anions binding efficiency examination. Receptor C4MA displayed strong affinity for Al3+and S2O72? with enhanced fluorescence intensity. The selective response of C4MA was investigated in the presence of different co-existing competing ions. The limit of detection (LOD) of Al3+and S2O72? was calculated as 2.8?×?10?6 M and 2.6?×?10?7 M respectively. Sensor C4MA forms (1:1) stoichiometric complex with both Al3+ and S2O72? and their binding constants were calculated as 12.1?×?104 and 8.3?×?103 respectively. Complexes were also characterized through FT-IR spectroscopy.
An increasingly wide variety of fluorescent compounds is used in biotechnology, genomics, immunoassays, array technologies, imaging, and drug discovery. Therefore, synthesis of fluorophores with novel structural features can be interesting and useful in various fields. In this paper, four new fluorescent heterocyclic compounds with high quantum yields are introduced. These new fluorophores are synthesized in moderate to high yields via regioselective nitration of 3-alkyl-8-(4-chlorophenyl)-3 H-imidazo[4′,5′:3,4]benzo[c]isoxazoles. The latter compounds are obtained from the reaction of 1-alkyl-5-nitro-1 H-benzoimidazoles with (4-chlorophenyl)acetonitrile in basic MeOH solution. Physical spectral (UV-vis, IR, 1HNMR, 13C NMR, NOESY and fluorescence) and analytical data have established the structures of synthesized compounds. The fluorescence properties of new fluorescent heterocyclic compounds are studied. The fluorescence of all compounds is very intense and fluorescence quantum yields are high (> 0.52). Density functional theory (DFT) calculations are performed to provide the optimized geometries, relevant frontier orbitals and the prediction of 1H NMR chemical shifts for confirming the exact structure of fluorescent compounds. Calculated electronic absorption spectra were also obtained by time-dependent density functional theory (TD-DFT) method.
