Investigation of the influence of NaCl concentration on Halobacterium salinarum growth

Microcalorimetry was used to study the influence of NaCl concentration on Halobacterium salinarum growth. From the thermogenic curves and thermokinetic parameters of H. salinarum growth in different concentrations of NaCl, it was found that the optimum NaCl concentration for H. salinarum growth was not a wide range from 3.5 mol L^–1 to NaCl saturation (about 5.2 mol L^–1), as is generally acknowledged, but just around 230 g L^–1 (approximately 3.9 mol L^–1). And when external NaCl concentration was above 230 g L^–1, the growth metabolism of H. salinarum decreased constantly with the increasing of NaCl concentration. These have never been described before. Further investigation by transmission electron microscopy revealed that H. salinarum growing in approaching NaCl saturation underwent plasmolysis, which interpreted the novel finding of microcalorimetry perfectly. Our work shows that microcalorimetry may reveal more and newer details about microbial growth than the existing methods do. These details are significant to understand biological processes.     

Synthesis of 4<Emphasis Type="Italic">E</Emphasis>,7<Emphasis Type="Italic">Z</Emphasis>-tridecadien-1-ylacetate,a component of the <Emphasis Type="Italic">Phthorimaea opercucella</Emphasis> sex pheromone

A new synthetic approach to 4E,7Z-tridecadien-1-ylacetate, a component of the Phthorimaea opercucella (Zeller) potato moth sex pheromone, was developed using a highly stereoselective Claisen rearrangement and Wittig reaction. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 235–236, May–June, 2007.     

Indirect spectrophotometric determination of diltiazem hydrochloride in pure form and pharmaceutical formulations

Three simple, accurate, and sensitive spectrophotometric methods (A, B and C) have been described for the indirect assay of diltiazem hydrochloride (DIL.HCl), either in pure form or in pharmaceutical formulations. The first method (A) is based on the oxidation of DIL.HCl by N-bromosuccinimide (NBS) and determination of unconsumed NBS by measuring the decrease in absorbance of amaranth dye (AM) at a suitable λ _max =521 nm. Other methods (B) and (C) involve the addition of excess cerric ammonium sulfate (CAS) and subsequent determination of the unconsumed oxidant by a decrease in the red color of chromotrope 2R (C2R) at a suitable λ _max =528 nm or a decrease in the orange-pink color of rhodamine 6G (Rh6G) at λ _max =525 nm, respectively. Regression analysis of Beer-Lambert plots showed good correlation in the concentration ranges 3.0–9.0, 3.5–7.0 and 3.5–6.3 μg ml⁻¹ for methods A, B and C, respectively. The apparent molar absorptivity, Sandell's sensitivity, detection and quantification limits were calculated. The proposed methods have been applied successfully for the analysis of the drug in its pure form and its dosage form. No interference was observed from a common pharmaceutical adjuvant. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Quantitative HPLC Determination and Stability Studies of Pyridostemin in Extracts and Water Dispersible Granule Formulations of Stemona curtisii

A reversed-phase high-performance liquid chromatographic method has been developed and validated for the determination of pyridostemin, the major pesticidal alkaloid found in Stemona curtisii. This methodology was applied to the investigation of plant extracts and water dispersible granule formulations. Stability indicating procedures have also been carried out. The chromatographic separation was on a C₁₈ column with a mixture of acetonitrile–water–triethylamine (30:70:0.12, v/v/v), using UV detection at 300 nm. Validation procedures showed that the method was specific, accurate and precise. The response was linear over a range of 5–25 μg mL⁻¹ with recoveries in the range of 98.28–102.85%. The RSD for intra- and inter-day precision were <0.72 and <1.29%, respectively. Extraction of plant material with dichloromethane gave a significantly higher pyridostemin content in the crude extracts when compared with extractions in methanol. Partial purification of the crude extracts by silica gel column chromatography was used to concentrate the mixture about fourfold. Degradation behavior of pyridostemin in the partially purified extracts followed first-order kinetics. The main pathways for its decomposition were base hydrolysis and oxidation.     

Study on interaction between antibiotics and Escherichia coli DH5α by microcalorimetric method

A microcalorimetric technique based on the bacterial heat output was applied to evaluate the influence of antibiotics PIP (Piperacillin Sodium) and composite preparation of PIP and SBT (Sulbactam Sodium) on the growth of E. coli DH5α. The power–time curves of the growth metabolism of E. coli DH5α were studied using a TAM Air Isothermal Microcalorimeter at 37°C. By analyzing the power–time curves, the parameters such as growth rate constants (k), inhibitory ratio (I), the maximum heat power (P _m) and the time of the maximum heat power (t _m) were obtained. The results show that different concentrations of antibiotics affect the growth metabolism of E. coli DH5α. The PIP in the concentration range of 0–0.05 μg mL^–1 has a stimulatory effect on the E. coli DH5α growth, while the PIP of higher concentrations (0.05 –0.25 μg mL^–1) can inhibit its growth. It seems that the composite preparation composed of PIP and SBT cannot improve the inhibitory effect on E. coli DH5α as compared with the PIP.     

Synthesis of 3β,20S-dihydroxydammar-24-en-12-one 3,20-di-O-β-D-glucopyranoside (chikusetsusaponin-LT8), a glycoside from Panax japonicus

A method for preparative production of 3β,20S-dihydroxydammar-24-en-12-one 3,20-di-O-β-D-glucopyranoside (1), a glycoside from Panax japonicus, chikusetsusaponin-LT₈ was developed. Chemical transformation of betulafolientriol, a component of Betula leaves extract, produced the 12-keto-20S-protopanaxadiol (3β,20S-dihydroxydammar-24-en-12-one) (2), exhaustive glycosylation of which by 2,3,4,6-tetra-O-acetyl-α-D-glucopyranosylbromide (3) under Koenigs—Knorr reaction conditions with subsequent removal of protecting groups formed 3β,20S-dihydroxydammar-24-en-12-one 3,20-di-O-β-D-glucopyranoside (1). The principal glycosylation product was 3β,20S-dihydroxydammar-24-en-12-one 3-O-β-D-glucopyranoside if equimolar amounts of (2) and (3) were used. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 44–48, January–February, 2006.     

Downstream processing of lactic acid-whey permeate fermentation broths by hollow fiber ultrafiltration

Membrane filtration is a suitable method for cell harvesting and clarification of fermentation broths. Hollow fiber ultrafilters gave essentially 100% rejection ofL. bulgaricus cells from a whey permeate fermentation broth. A combination of low pressures and high velocity generally gave the best permeate flux. Fermentation media components (in this case, from the whey permeate) contributed significantly to fouling. Considering the pressure limitations of the current generation of asymmetric hollow fiber modules and the changes in physical properties of the fermentation broths, a cell concentration of 100–150 g/L could be obtained with the flux still relatively high (above 20LMH), although the chemical compatibility of the membrane module itself under long-term exposure to high acid conditions should be considered.     

A new triterpene glycoside from <Emphasis Type="Italic">Premna microphylla</Emphasis>

A new triterpene glycoside, namely 28-O-α-L-rhamnopyranosyl (1→2)-β-D-glucopyranoside tormentic acid ester, was isolated from the leaves of Premna microphylla, together with two known triterpenes, i.e., arjunolic acid (2) and hyptatic acid A (3). Its structure was established by mass-spectrometric and spectroscopic methods, especially 2D NMR techniques. This is the first report of the isolation of triterpenes from this plant. Published in Khimiya Prirodnykh Soedinenii, No. 2, pp. 173–174, March–April, 2009.     

Conformational Analysis,Infrared, and Fluorescence Spectra of 1-Phenyl-1,2-propandione 1-oxime and Related Tautomers: Experimental and Theoretical Study

Summary. Conformational analysis and frequency calculation were achieved for 1-phenyl-1,2-propandione 1-oxime and its four tautomers: 1-nitroso-1-phenyl-1-propen-2-ol, 1-nitroso-1-phenyl-2-propanone, 2-hydroxy-1-phenyl-propenone oxime, and 3-nitroso-3-phenyl-propen-2-ol. Calculations were carried out at the Hartree–Fock (HF), Density Functional Theory (B3LYP), and the second-order M?ller–Plesset perturbation (MP2) levels of theory using 6-31G^* and 6-311G^** basis sets. Five conformers with no imaginary vibrational frequency were obtained by free rotations around three single bonds of 1-phenyl-1,2-propandione-1-oxime: Ph–C(NOH)C(O)CH₃, PhC(NOH)–C(O)CH₃, and PhC(N–OH)C(O)CH₃. Similarly, eight structures with no imaginary vibrational frequency were encountered upon rotations around three single bonds of 1-nitroso-1-phenyl-1-propen-2-ol: Ph–C(NO)C(OH)CH₃, PhC(N–O)C(OH)CH₃, and PhC(NO)C(–OH)CH₃. In the same manner, six minima were found through rotations around three single bonds of 1-nitroso-1-phenyl-2-propanone: Ph–CH(NO)C(O)CH₃, PhCH(–NO)C(O)CH₃, and PhCH(NO)–C(O)CH₃. Also, two minima were found through rotations around four single bonds of 2-hydroxy-1-phenyl-propenone oxime: Ph–C(NOH)C(OH)CH₂, PhC(N–OH)C(OH)CH₂, PhC(NOH)–C(OH)CH₂, and Ph-C(NOH)C(–OH)CH₂. Finally, two minima were found through rotations around four single bonds of 3-nitroso-3-phenyl-propen-2-ol: Ph–CH(NO)C(OH)CH₂, PhCH(–NO)C(OH)CH₂, PhCH(NO)–C(OH)CH₂, and PhCH(NO)C(–OH)CH₂. Interconversions within the above sets of conformers were probed through scanning (one and/or two dimensional), and/or QST3 techniques. The order of the stability of global minima encountered was: 1,2-propandione-1-oxime > 1-nitroso-1-phenyl-2-propanone > 1-nitroso-1-phenyl-1-propen-2-ol > 2-hydroxy-1-phenyl-propenone oxime > 3-nitroso-3-phenyl-propen-2-ol. Hydrogen bonding appears significant in tautomers of 1-nitroso-1-phenyl-1-propen-2-ol and 2-hydroxy-1-phenyl-propenone oxime. The CIS simulated λ_max for the first excited singlet state (S₁) of 1-phenyl-1,2-propandione 1-oxime is 300.4 nm, which was comparable to its experimental λ_max of 312.0 nm. The calculated IR spectra of 1-phenyl-1,2-propandione 1-oxime and its tautomers were compared to the experimental spectra.     

Polymer supported 5,10,15,20-tetrakis(phenoxy acetic acid)porphyrin derivative for separation and preconcentration of d- and f-electron metals

5,10,15,20-tetrakis(phenoxy acetic acid) porphyrin (PAAP) was covalently linked to Merrifield chloromethylated resin. Characterization of PAAP and the modified polymeric matrix were performed by ¹H NMR, FTIR and elemental analysis. The sorbent was used for the separation and enrichment of the d-electron metals (Mn(II), Co(II), Ni(II), Cu(II) and Zn(II)) at pH 6–8 and of the f-electron metals U(VI) and Th(IV) at pH 4–5. The metals ions were preconcentrated with a concentration factor range of 115–215 and then determined by flame atomic absorption spectrometry or visible spectrophotometry using Arsenazo(III). The retained metals were eluted with 2.0 mol L⁻¹ HNO₃ in the case of the d-electron metals and 0.1/0.25 mol L⁻¹ HCl in the case of the f-electron metals. The procedure was validated by analyzing the NIST standard reference material 2709 (San Joaquin Soil). Correspondence: Melek Merdivan, Chemistry Department, Faculty of Arts and Sciences, Dokuz Eylul University, 35160 Buca, Izmir, Turkey     

Sodium and silver phosphate glasses doped with chlorides of Fe,Mn and Zn

A number of samples of sodium and silver phosphate glasses doped with various compositions of some transition metals viz. iron, manganese and zinc chlorides alongwith undoped samples of sodium and silver phosphate glasses were synthesized and characterized by X-ray diffraction, IR spectral, electrical conductivity and differential scanning calorimetry (DSC). The glass transition temperature (T _g) and crystallization temperature (T _c) values obtained from DSC curves were found to increase with increasing concentration of the dopant Fe/Mn/Zn chlorides in both sodium and silver phosphate glasses and the following sequence is observed: T _g(–FeCl₃)>T _g(–MnCl₂)>T _g(–ZnCl₂) T _c(–FeCl₃)>T _c(–MnCl₂)>T _c(–ZnCl₂) The increase in T _g and T _c values indicate enhanced chemical durability of the doped glasses. The electrical conductivity values and the results of FTIR spectral studies have been correlated with the structural changes in the glass matrix by the addition of different transition metal cations as dopants.     

Isolation of biocidal peptides from Daucus carota seeds

Two biocidal peptides were isolated from carrot seeds (Daucus carota). Their fungicidal activity toward the pathogenic fungus Verticillium dahliae was investigated. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 167–168, March–April, 2006.     

Effect of the amount and type of the crosslinker on the swelling behavior of temperature-sensitive poly(N-tert-butylacrylamide-co-acrylamide) hydrogels

Temperature-sensitive poly(N-tert-butylacrylamide-co-acrylamide) [P(NTBA-co-AAm)] hydrogels were synthesized by free-radical copolymerization in a water–methanol mixture using three types of crosslinkers: 1,2-ethyleneglycol dimethacrylate, N,N-methylenebisacrylamide, and 1,3-butandiol dimethacrylate. These thermosensitive hydrogels were swollen to equilibrium in water at 20°C and examined by gravimetric measurements. The influence of type and content of crosslinkers on the swelling ratio, the polymer–solvent interaction parameter (χ), the average molecular mass between crosslinks and the effective crosslinking density (ν _E) of the hydrogels were reported and discussed. The swelling process in water was found to be non-Fickian diffusion. The enthalpy (ΔH) and entropy (ΔS) changes appearing in the χ parameter for the hydrogels were determined by using the Flory–Rehner theory based on the phantom network model of swelling equilibrium. Negative values for ΔH and ΔS indicated that the hydrogels had a negative temperature-sensitive property in water; that is, swelling at a lower temperature and shrinking at a higher temperature. The temperature-reversibility and on–off switching properties of the P(NTBA-co-AAm) hydrogels may be considered as good candidates for designing novel drug-delivery systems.     

Quantitative Determination of the Chemical Profile of the Plant Material “Qiang-huo” by LC-ESI-MS-MS

The rhizomes of Notopterygium incisum Ting. ex H. T. Chang and N. forbesii Boiss. are recorded in the pharmacopoeia of the People’s Republic of China under the same name “Qiang-huo”. Valid quality control of Qiang-huo is desirable due to the fact that the wild natural sources of Qiang-huo have almost been exhausted and large regulated cultivation is developing. In the present paper, HPLC fingerprinting was developed to identify and distinguish both species in detail. The unique properties of the HPLC fingerprint were validated by analyzing 15 batches of N. incisum and 11 batches of N. forbesii. A standardized procedure involving liquid chromatography–electrospray ionization–multiple stage mass spectrometry (HPLC-ESI-MSⁿ) was developed to identify the fingerprint components, and a total of eight characteristic peaks were unequivocally identified. An average chromatogram from 15 batches of N. incisum from different geographic sources, considered to be the original and genuine herbal medicine, was first established as the standard fingerprint. The chemical profiles of 11 batches of N. forbesii samples were found to be variable. The HPLC method can differentiate N. incisum from N. forbesii by either the marker compounds notoptol (4) and p-hydroxypenethylanisate (8) or the amounts of nodakenin (1), notopterol (5), and 6′-O-trans-feruloylnodakenin (7). The HPLC fingerprint analysis is specific and may serve for quality identification and comprehensive evaluation of Qiang-huo.     

The Merrifield–Simmons index in (<Emphasis Type="Italic">n</Emphasis>, <Emphasis Type="Italic">n</Emphasis> + 1)-graphs

A (n, n + 1)-graph G is a connected simple graph with n vertices and n + 1 edges. In this paper, we determine the upper bound for the Merrifield–Simmons index in (n, n + 1)–graphs in terms of the order n, and characterize the (n, n + 1)–graph with the largest Merrifield–Simmons index.     

Flow injection chemiluminescence immunoassay for 17β-estradiol using an immunoaffinity column

A new flow injection chemiluminescent immunoassay was developed for the detection of 17β-estradiol (E₂). The method uses p–iodophenol (PIP) as enhancer and is based on a solid-phase immunoassay format in which an E₂–OVA immobilized immunoaffinity column inserted in the flow system is used to trap unbound horseradish peroxidase (HRP)-labeled anti-E₂ antibody after an off-line incubation of E₂ with HRP-labeled anti-E₂ antibody. The trapped enzyme conjugate was detected by injecting substrates to produce an enhanced chemiluminescence (CL) response. The linear range for E₂ was 10.0–1,000.0 ng mL⁻¹ with a correlation coefficient of 0.996 and a detection limit of 3.0 ng mL⁻¹. The sampling and chemiluminescence detection time for one sample was 400 s after a pre-incubation procedure of 30 min. Serum samples detected by this method were in good agreement with the results obtained by EIA with E₂–biotin.      

Host–Guest Complexation of <Emphasis Type="Italic">β</Emphasis>-, <Emphasis Type="Italic">γ</Emphasis>-Cyclodextrin with Alkyl Trimethyl Ammonium Bromides in Aqueous Solution

As a continuation of our previous investigation, interactions between cyclodextrin (β-CD), γ-cyclodextrin (γ-CD) and alkyl trimethylammonium bromides in aqueous solutions have been studied with titration calorimetry and ¹H NMR at 298.15 K. The results are discussed in terms of the amphiphilic interaction of CD with surfactants and the iceberg structure formed by water molecules existing around the hydrophobic tail of surfactant molecules. The stoichiometry of the β-CD–surfactant system is 1:1 whereas that of the γ-CD–surfactant system is 1:2. The corresponding formation enthalpy (negative) of the complexes of the two systems decreases with an increase in the number of carbon atoms (n) in hydrophobic chain of surfactant molecule, C _n H_2n+1, whereas the entropy increases with the enlargement of n.     

Optimization of Fermentation Parameters to Enhance the Production of Ethanol from Palmyra Jaggery Using <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> in a Batch Fermentor

Application of statistical experimental designs for optimization of fermentation parameters to enhance ethanol production, which is an economical and renewable energy source using Saccharomyces cerevisiae NCIM 3090 from palmyra jaggery, was studied in a batch fermentor. Using Plackett–Burman design, impeller speed, concentrations of CoCl₂ and KH₂PO₄ were identified as significant variables, which highly influenced ethanol production, and these variables were further optimized using a central composite design (CCD). The ethanol production was adequately approximated with a full quadratic equation obtained from three factors and five levels of CCD. Maximum ethanol concentration of 132.56 g/l (16.8% [v/v]) was obtained for an impeller speed of 247.179 (≈250) rev/min, CoCl₂ of 0.263 g/l and KH₂PO₄ of 2.39 g/l. A second-order polynomial regression model was fitted and was found adequate with R ² of 0.8952. This combined statistical approach enables rapid identification and investigation of significant parameters for improving the ethanol production and could be very useful in optimizing processes.     

Syntheses, structures and properties of two new neodymium complexes with N-P-acetamidobenzenesulfonyl-glycine acid

Two new neodymium complexes, [Nd₂(abglyH)₆(2,2′-bipy)₂(H₂O)₂] · 4H₂O 1 and {[Nd(abglyH)₃(H₂O)₂] · (4,4′-bipy) · 7H₂O}_n 2 (abglyH₂ = N-P-acetamidobenzenesulfonyl-glycine acid, 2,2′-bipy = 2,2′-bipyridine, 4,4′-bipy = 4,4′-bipyridine), have been synthesized and their structures have been measured by X-ray crystallography. In 1, nine-coordinated Nd(III) ions are bridged by two syn–syn bidentate and two tridentate bridging carboxylate groups from four different abglyH⁻ anions to form dinuclear motifs, which are further connected into a 3-D supramolecular framework via hydrogen bonds between the binuclear motifs and the uncoordinated water molecules. In 2, eight-coordinated Nd(III) ions are linked by six carboxylate groups adopting a syn–syn bidentate bridging fashion to form a 1-D inorganic–organic alternating linear chain. These polymeric chains generate microchannels extending along the a direction, and these cavities are occupied by discrete tetradecameric water clusters, which interact with their surroundings and finally furnish the 3-D supramolecular network via hydrogen bonds. At the same time, π–π stacking interactions between benzene rings from abglyH⁻ anions also play an important role in stabilizing the network.