Superbase-derived protic ionic liquids with chelating fluorinated anions

Eighteen new protic ionic liquids were synthesized in one step from five organic superbases and five commercially available fluorinated β-diketones. Physical properties of the ionic liquids, including thermal decomposition temperature were determined. Nine of the ionic liquids were examined as extraction media for La³⁺, with some very large distribution coefficients obtained.     

Induced Protic Behaviour in Aprotonic Ionic Liquids by Anion Basicity for Efficient Carbon Dioxide Capture

The interactions between aprotonic tetrabutylphosphonium carboxylate ionic liquids (ILs), [P_{4 4 4 4}][C_nCOO] (n=1, 2 and 7), and water were investigated. The cation-anion interactions occur via the α-¹H on [P_{4 4 4 4}]⁺ and the carboxylate headgroup of the anion. Upon addition, H₂O localises around the carboxylate headgroups, inducing an electron inductive effect towards the oxygens, leading to ion-pair separation. Studies with D₂O and [P_{4 4 4 4}][C_nCOO] revealed protic behaviour of the systems, with proton/deuterium exchange occurring at the α-¹H of the cation, promoted by the basicity of the anion, forming an intermediate ylide. The greater influence of van der Waals forces of the [P_{4 4 4 4}][C₇COO] system allows for re-orientation of the ions through larger interdigitation. The protic behaviour of the neat ILs allows for CO₂ to be chemically absorbed on the ylide intermediate, forming a phosphonium-carboxylate zwitterion, signifying proton exchange occurs even in the absence of H₂O. The absorption of CO₂ in equimolar IL-H₂O mixtures forms a hydrogen carbonate, through a proposed reaction of the CO₂ with an intermediate hydroxide, and carboxylic acid.     

Comparative Investigation of the Ionicity of Aprotic and Protic Ionic Liquids in Molecular Solvents by using Conductometry and NMR Spectroscopy

Electrical conductivity (σ), viscosity (η), and self‐diffusion coefficient (D) measurements of binary mixtures of aprotic and protic imidazolium‐based ionic liquids with water, dimethyl sulfoxide, and ethylene glycol were measured from 293.15 to 323.15 K. The temperature dependence study reveals typical Arrhenius behavior. The ionicities of aprotic ionic liquids were observed to be higher than those of protic ionic liquids in these solvents. The aprotic ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate, [bmIm][BF₄], displays 100 % ionicity in both water and ethylene glycol. The protic ionic liquids in both water and ethylene glycol are classed as good ionic candidates, whereas in DMSO they are classed as having a poor ionic nature. The solvation dynamics of the ionic species of the ionic liquids are illustrated on the basis of the ¹H NMR chemical shifts of the ionic liquids. The self‐diffusion coefficients D of the cation and anion of [HmIm][CH₃COO] in D₂O and in [D₆]DMSO are determined by using ¹H nuclei with pulsed field gradient spin‐echo NMR spectroscopy.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin Immobilized in a Polymeric Ionic Liquid Film

A polymer film based on polymeric ionic liquid, which was poly(1‐vinyl‐3‐butylimidazolium chloride) (poly(ViBuIm⁺Cl^?)for short), was firstly used as matrix to immobilize hemoglobin (Hb). FTIR and UV‐vis spectra demonstrated that the native structure of Hb was well preserved after entrapped into the polymer film. The Hb immobilized in the poly(ViBuIm⁺Cl^?) film showed a fast direct electron transfer for the Hb‐Fe^III/Fe^II redox couple. Based on the direct electron transfer of the immobilized Hb, polyvinyl alcohol (PVA)/Hb/poly(ViBuIm⁺Cl^?)/GC electrode displayed good sensitivity and wide linear range for the detection of H₂O₂. The linear range of the PVA/Hb/poly(ViBuIm⁺Cl^?)/GC electrode to H₂O₂ is from 3.5 to 224 μM with a limit of detection of 1.17 μM. Such an avenue, which integrated polymeric ionic liquid and redox protein via a simple method, may provide a novel and efficient platform for the fabrication of biosensors, biofuel cells and other bioelectrochemical devices.     

The Baeyer-Villiger oxidation of ketones with Oxone in the presence of ionic liquids as solvents

Cyclic and linear ketones were readily oxidised with Oxone^® at 40 °C in ionic liquids as solvents and short times (2.5-20 h), affording their corresponding lactones and esters in high yields (65-95%). Both, aprotic and protic ionic liquids were used. The best conversion of ketones and the highest yields of products were obtained with 1-buty-3-methylimidazolium tetrafluoroborate and 1-methylimidazolium acetate as solvents. These ionic liquids were also efficiently recycled in the Baeyer-Villiger reaction without significant loss of activity. Several factors, such as the partial solubility of KHSO₅ in the ionic liquid, its viscosity and the presence of a proton in protic ionic liquids, have an influence on the course of the reaction.     

Characterization of poly(vinyl alcohol) during the emulsion polymerization of vinyl acetate using poly(vinyl alcohol) as emulsifier

During the emulsion polymerization of vinyl acetate (VAc) using poly(vinyl alcohol) (PVA) as stabilizer and potassium persulfate as initiator, the VAc reacts with PVA forming PVA-graft-PVAc. When the grafted polymer reaches a critical size it becomes water-insoluble and precipitates from the aqueous phase contributing to the formation of polymer particles. Since particle formation and therefore the properties of the final latex will depend on the degree of grafting, it is important to quantify and to characterize the grafted PVA. In this work, the quantitative separation and characterization of the grafted water-insoluble PVA was carried out by a two-step selective solubilization of the PVAc latex, first with acetonitrile to separate PVAc homopolymer, followed by water to separate the water-soluble PVA from the remaining acetonitrile-insoluble material. After the separation, the water-soluble and water-insoluble PVA were characterized by Fourier Transform Infrared (FTIR) spectroscopy and ¹H and ¹³C nuclear magnetic resonance (NMR) analyses, from which the details of the PVA-graft-PVAc structure were obtained. © 1996 John Wiley & Sons, Inc.     

Bicyclic imidazolium-based ionic liquids: synthesis and characterization

We previously reported the use of imidazole as starting compound for preparing a bicyclic imidazolium ionic liquid, [b-3C-im][NTf₂], with an overall 29% isolated yield in four synthetic steps. This new room temperature ionic liquid was shown to be far more chemically stable than commonly used [bmim][PF₆], [bdmim][PF₆], and [bdmim][NTf₂]. Because of this intriguing chemical stability, it prompted us to develop a more generalized and high yielding synthesis so that molecular diversity of bicyclic ionic liquids may be explored. In this work, we amended the previous synthetic route by employing 4-chlorobutyronitrile or 5-chlorovaleronitrile as starting materials and successfully developed a five-step synthesis of a series of novel bicyclic imidazolium-based ionic liquids in 40-53% overall isolated yields. We investigated intrinsic reactivity of all bicyclic ionic liquids prepared and found that, under strongly basic conditions, among all tested ionic liquids the 5,5-membered [R-3C-im][NTf₂] ionic liquids were most stable to solvent deuterium isotope exchange while the previously reported [bdmim][NTf₂] ionic liquid was 50% deuterium exchanged at its C-2 methyl in 30 min at ambient temperature. Under identical condition, the commonly used [bmim][NTf₂] ionic liquid was deuterium exchanged instantaneously at its C-2 hydrogen. In the absence of bases, only [bmim][PF₆] was deuterium exchanged (50% within 1 h) and all other ionic liquids gave no detectable exchanges even after 25 days at ambient temperature. Moreover, both [bmim][NTf₂] and [bdmim][NTf₂] ionic liquids were readily methylated at C-2 position with methyl iodide under basic condition at room temperature. Under the same condition, [R-3C-im][NTf₂] and [R-4C-im][NTf₂] ionic liquids were completely stable and chemically inert. We envisioned that [R-3C-im][NTf₂] should be well suited as solvents for organic synthesis.     

Polyaddition of bifunctional cyclic carbonate with diamine in ionic liquids: In situ ion composite formation and simple separation of ionic liquid

Polyaddition of bifunctional cyclic carbonates and diamines in ionic liquids proceeded smoothly to afford polyurethanes having hydroxyl groups in the side chain (i.e., poly(hydroxyurethane)). The reaction mixtures separated into ionic liquids and ionic composites consisting of poly(hydroxyurethane) and ionic liquids. The ionic composites originated from the interactions between hydroxyl groups in the side chains and the ionic liquids, confirmed by IR spectroscopic analysis. When the polyaddition was conducted in the mixed solvent consists of water and N‐n‐butylimidazolium hexafluorophosphate. After the reaction, the polymer and the ionic liquid could be separated easily. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4629–4635, 2009     

Solubilization of fullerene into ionic liquids by the use of fluoroalkyl end‐capped oligomers

Fluoroalkyl end‐capped oligomers were solubilized into a variety of ionic liquids such as N‐methylpyrazolium tetrafluoroborate, 3‐methylpyrazolium tetrafluoroborate and 1‐butyl‐3‐methylimidazolium hexafluorophosphate, and these fluorinated oligomers were able to reduce the surface tension of these ionic liquids. Interestingly, these fluorinated oligomers were able to solubilize fullerene into ionic liquids effectively. Fluoroalkyl end‐capped fullerene co‐oligomers, which were prepared by the oligomerizations of fluoroalkanoyl peroxides with radical polymerizable monomers such as acryloylmorpholine in the presence of fullerene, were more effective in solubilizing fullerene into ionic liquids compared to the corresponding fluoroalkyl end‐capped homo‐oligomers possessing no fullerene units. Fluoroalkyl end‐capped fullerene co‐oligomers/fullerene/ionic liquid complexes thus obtained were applied to the arrangements of fullerenes above the poly(methyl methacrylate) (PMMA) surface, and the higher fluorescent intensity of fullerene was obtained in the modified PMMA surface, although the reverse side of this modified film surface afforded an extremely weak fluorescent intensity. Copyright © 2005 John Wiley & Sons, Ltd.     

一类新型酯类离子液体的合成

以氯乙酸乙酯和氮杂环化合物(1-甲基咪唑、吡啶、N-乙基哌啶、N-甲基吗啉)为原料, 采用两步法合成了一类新型的酯类离子液体, 对合成的12个化合物进行了元素分析, ¹H NMR谱和一些物理性质的测定. 大多数化合物的熔点低于100 ℃, 为室温离子液体. 所合成离子液体的热稳定范围都比较宽, 性质稳定.     

Ab initio calculation of anion proton affinity and ionization potential for energetic ionic liquids

Developing a better understanding of the bulk properties of ionic liquids requires accurate measurements of the underlying molecular properties that help to determine the bulk behavior. Two computational methods are used in this work: second‐order perturbation theory (MP2) and completely renormalized coupled cluster theory [CR‐CC(2,3)], to calculate the proton affinity and ionization potential of a set of anions that are of interest for use in protic, energetic ionic liquids. Compared with experimental values, both methods predict similarly accurate proton affinities, but CR‐CC(2,3) predicts significantly more accurate ionization potentials. It is concluded that more time intensive methods like CR‐CC(2,3) are required in calculations involving open shell states like the ionization potential. © 2015 Wiley Periodicals, Inc.     

Reactive Oligomeric Protic Cationic Linear Ionic Liquids with Different Types of Nitrogen Centers

Reactive linear oligo(ethylene oxides) containing terminal secondary hydroxyl groups and secondary amino groups combined with nitrogen heterocyclic fragments are synthesized by the reaction of oligo(oxyethylene glycol) α,ω-diglycidyl ether (М = 1.0 × 10³) with 1-(3-aminopropyl)imidazole, 2-aminopyridine, or 2-amino-3-methylpyridine. Protonation of the synthesized compounds by ethanesulfonic acid and p-toluenesulfonic acid at their different ratios is studied. This process makes it possible to obtain oligomeric linear protic cationic ionic liquids capable of condensation. The proton conductivity of oligomeric ionic liquids is investigated under anhydrous conditions in the temperature range of 40–120°С. The highest conductivity (1.36 × 10^–3 S/cm) is attained in the case of methylpyridinium ethanesulfonate oligomeric ionic liquid at 120°С. These compounds are thermally stable to a temperature of 250–290°С. They show promise for the synthesis of polymeric analogs of block ionic liquids suitable in the production of electrochemical devices for various purposes.     

A novel composite polymer electrolyte containing room-temperature ionic liquids and heteropolyacids for dye-sensitized solar cells

A novel composite polymeric gel comprising room-temperature ionic liquids (1-butyl-3-methyl-imidazolium-hexafluorophosphate, BMImPF₆) and heteropolyacids (phosphotungstic acid, PWA) in poly(2-hydroxyethyl methacrylate) matrix was successfully prepared and employed as a quasi-solid state electrolyte in dye-sensitized solar cells (DSSCs). These composite polymer electrolytes offered specific benefits over the ionic liquids and heteropolyacids, which effectively enhanced the ionic conductivity of the composite polymer electrolyte. Unsealed devices employing the composite polymer electrolyte with the 3% content of PWA achieved the solar to electrical energy conversion efficiency of 1.68% under irradiation of 50 mW cm⁻² light intensity, increasing by a factor of more than three compared to a DSSC with the blank BMImPF₆-based polymer electrolyte without PWA. It is expected that these composite polymer electrolytes are an attractive alternative to previously reported hole transporting materials for the fabrication of the long-term stable quasi-solid state or solid state DSSCs.     

Synthesis of 1,2-azidoalcohols from epoxides using a task-specific protic ionic liquid: 1-hydrogen-3-methylimidazolium azide

A task-specific ionic liquid as an environmentally eco-friendly green catalyst has been synthesized and used in the ring opening of epoxides under green conditions. In order to use protic ionic liquids (PIL), we decided to synthesize 1,2-azidoalcohols via a ring opening reaction of epoxides with 1-hydrogen-3-methylimidazolium azide ([Hmim]N₃), which actually acts as a solvent, a reagent and an activator of the epoxide ring. The reaction was carried out in short times (50–70 min) at 70 °C to give 1,2-azidoalcohol in 80–94% isolated yields.     

Proton Thermodynamics in a Protic Ionic Liquid,Ethylammonium Nitrate

In order to investigate the proton solvation state in protic ionic liquids (PILs), ten acid dissociation enthalpies and entropies of eight compounds were determined in ethylammonium nitrate (EAN). Regardless of the nature of the compound, 24 kJ mol⁻¹ larger enthalpy and 65 J mol⁻¹ K⁻¹ larger entropy than those in water, respectively, were observed. These values were reasonably explained by the differences in the proton solvation structure in EAN and water. Namely, protons in EAN exist as HNO₃, having a higher reaction energy than that of H₃O⁺ in water, undergo entropic stabilization as a result of the less-structured solvation. As such, the entropic effect of the proton solvation structure on the acid–base property is possibly applicable to all PILs. In addition, based on these proton thermodynamics, enthalpy and entropy windows were proposed as a novel perspective for the characterization of solvents. Use of this concept enabled the visualization of similarities and differences between EAN and water.     

DFT Study of the Geometrical and Electronic Structures of Geminal Dicationic Ionic Liquids 1,3‐Bis[3‐methylimidazolium‐1‐yl]hexane Halides

In this work, the geometrical and electronic properties of the mono cationic ionic liquid 1‐hexyl‐3‐methylimidazolium halides ([C₆(mim)]⁺_X^?, X=Cl, Br and I) and dicationic ionic liquid 1,3‐bis[3‐methylimidazolium‐1‐yl]hexane halides ([C₆(mim)₂X₂], X=Cl, Br and I) were studied using the density functional theory (DFT). The most stable conformer of these two types ionic liquids (IL) are determined and compared with each other. Results show that in the most stable conformers, in both monocationic ILs and dicationic ILs, the Cl^? and Br^? anions prefer to locate almost in the plane of the imidazolium ring whereas the I^? anion prefers nearly vertical location respect to the imidazolium ring plan. Comparison of hydrogen bonding and ionic interactions in these two types of ionic liquids reveals that these ionic liquids can be formed hydrogen bond by Cl^? and Br^? anion. The calculated thermodynamic functions show that the interaction of cation — anion pair in the dicationic ionic liquids are more than monocationic ionic liquids and these interactions decrease with increasing the halide anion atomic weight.     

Synthesis and properties of all solid polymer electrolytes based on poly(vinyl acetate‐co‐acetyl ethylene oxide acrylate)

Poly(acetyl ethylene oxide acrylate‐co‐vinyl acetate) (P(AEOA‐VAc)) was synthesized and used as a host for lithium perchlorate to prepare an all solid polymer electrolyte. Introduction of carbonyl groups into the copolymer increased ionic conductivity. All solid polymer electrolytes based on P(AEOA‐VAc) at 14.3 wt% VAc with 12wt% LiClO₄ showed conductivity as high as 1.2 × 10^?4 S cm^?1 at room temperature. The temperature dependence of the ionic conductivity followed the VTF behavior, indicating that the ion transport was related to segmental movement of the polymer. FTIR was used to investigate the effect of the carbonyl group on ionic conductivity. The interaction between the lithium salt and carbonyl groups accelerated the dissociation of the lithium salt and thus resulted in a maximum ionic conductivity at a salt concentration higher than pure PAEO‐salts system. Copyright © 2010 John Wiley & Sons, Ltd.     

Theoretical study of the Michael addition of acetylacetone to methyl vinyl ketone catalyzed by the ionic liquid 1‐butyl‐3‐methylimidazolium hydroxide

By performing density functional theory calculations, we have investigated the Michael addition of acetylacetone to methyl vinyl ketone in the absence and presence of the ionic liquid 1‐butyl‐3‐methylimidazolium hydroxide ([bmIm]OH). In the absence of ionic liquids, acetylacetone is firstly tautomerized to enol form and then takes place Michael addition to methyl vinyl ketone. As in the catalyzed Michael addition reaction, a bmIm⁺‐OH^? ion pair is introduced into the reaction system to model the effect of the ionic liquid environment on the reactivity. The calculated results show that the anion enhances nucleophilic ability of acetylacetone since the OH^? anion captures a proton to form an acetylacetone anion‐H₂O complex, and the cation improves the electrophilic ability of methyl vinyl ketone by forming intermolecular hydrogen‐bonds. Both the remarkable effects of the cation and anion on the reactivity of reactants promote this reaction, which take place more easily compared with uncatalyzed reaction. The calculated results show that the main product of the Michael addition is in its ketone form. Our study provides a detailed reaction mechanism of Michael addition catalyzed by basic ionic liquid [bmIm]OH and clearly reveal the catalytic role of ionic liquid in important chemical reaction. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Chloroalkylsulfonate ionic liquids by ring opening of sultones with organic chloride salts

An efficient route to prepare ionic liquids with chloroalkylsulfonate anions is presented; the synthesis proceeds in a one-step ring-opening reaction of sultones with an organic chloride salt and provides a very attractive access to new anion functionalised ionic liquids.     

Al[18F]F-HBED-CC-radiolabeling in a media of protic alkanolammonium ionic liquids

The possibility of Al¹⁸F-radiolabeling of molecules with the N,N'-bis[2-hydroxy-5-(2-carboxyethyl)benzyl]ethylenediamine-N, N'-diacetic acid motif in the medium of protic alkanolammonium ionic liquids is reported for the first time. Ionic liquids containing triethanolammonium or triisopropanolammonium cations proved to be the most promising. High values of radiochemical conversion were achieved using the minimum amount of the precursor.