Thermo gravimetric analysis of supramolecular complexes of p-tert-butylcalix[6]arene and ammonium cations: crystal structure of diethylammonium complex

Thermo gravimetric analysis of ammonium-p-tert-butylcalix[6]arene salts were carried out to determine the stoichiometry of the inclusion compounds and the temperature of leaving of the ammonium cation, as amine, from the solid phase by a reverse proton transfer reaction to calixarene. The chain length of the amine molecules and their relative basicity order are the main factors which determine the decomplexation temperatures for the ammonium salts of piperidinium, diethylammonium, ethylenediammonium, morpholinium, s-butylammonium, butylammonium, hexylammonium and triethylammonium salts of p-tert-butylcalix[6]arene anion. The solid state structure of bis-diethylammonium-p-tert-butylcalix[6]arene dianion is reported. The calix moiety adopts a 1,2,3 alternate conformation, with one ammonium as exo-calix and other as endo-calix, with an intricate array of hydrogen bonds between phenol, phenolate and ammonium cations.     

Synthesis and Solid-State Conformation of a Calix[8]arene 1,5-Diquinone Derivative

The first example of a calix[8]quinone derivative, hexamethoxy-p-tert-butylcalix[8]-1,5-diquinone 5, has been synthesized from p-tert-butylcalix[8]arene 1by exploiting a protection-deprotection procedure. The structure of the 5·toluene inclusion compound has been determined by a single crystal X-ray diffraction study. The calix[8]arene molecule possesses a crystallographic inversion centre and assumes a ‘pseudo-chair-like’ conformation, with two opposite 3/4-cone moieties, which resembles the previously reported chair-like conformation of p-tert-butylcalix[8]arene. The 4 toluene molecules per unit cell occupy interstitial voids and are released in the temperature range of 30–160 °C.This revised version was published online in July 2005 with a corrected issue number.     

Synthesis and Complexation properties of N,N’-bis(calix[4]Arenoxyacetyl)Hydrazine Derivative

Heating of p-tert-butylcalix[4]arene bearing acethydrazide moiety at the lower rim in MeCN or PrⁱOH (EtOH) affords the corresponding N,N’-bis(calix[4]arenoxyacetyl)hydrazine derivative. The hydrazinolysis of mono(methoxycarbonylmethoxy)-p-tert-butylcalix[4]-arene in benzene or refluxing biscalixarene hydrazide in benzene in the presence of hydrazine hydrate produces the mixture of 1,2- and 1,3-(N,N’-diacetylhydrazine)-p-tert-butylcalix[4]arenes.     

Synthesis of two new p-tert-butylcalix[4]arene β-ketoimin derivatives for extraction of dichromate anion

In this study the selective derivatization of p-tert-butylcalix[4]arene was carried out and two new p-tert-butylcalix[4]arene β-ketoimin, 5,11,17,23-tetra-tert-butyl-25,27-bis-3-methyl-[(β-ketoimine)-ethoxy]-26,28-dihydroxycalix[4]arene (4), and 5,11,17,23-tetra-tert-butyl-25,27-bis-3-chloro-[(β-ketoimine)-ethoxy]-26,28-dihydroxycalix[4]arene (5) have been synthesized. In the synthesis, the lower rim of p-tert-butylcalix[4]arene was modified in order to acquire binding site for the recognition of dichromate anion. It was observed that these ionophores 4 and 5 showed high affinity towards dichromate anion. The protonated Schiff-base forms of the receptors were effective for transferring the HCr₂O₇ ^? anion from aqueous phase to a dichloromethane phase.     

p-tert-Butylcalix[4]arene Derivatives Containing Azathiol Receptors and Their Recognition towards Hg(II)

25,27(2,2'-bis(ethoxybenzyl))-1,9-diimine-3,7-dithianonane-p-tert-butylcalix[4]arene (3),25,27(4,4'-bis(ethoxybenzyl))-1,9-diimine-3,7-dithianonane-p-tert-butylcalix[4]arene (4),25,27(2,2'-bis(ethoxybenzyl))-1,8-diimine-3,6-dithianonane-p-tert-butylcalix[4]arene (5) and25,27(4,4'-bis(ethoxybenzyl))-1,8-diimine-3,6-dithianonane-p-tert-butylcalix[4]arene (6) havebeen synthesized by condensation reactions between25,27(2,2'-bis(ethoxybenzaldehyde))-p-tert-butylcalix[4]arene (1) and25,27(4,4'-bis(ethoxybenzaldehyde))-p-tert-butylcalix[4]arene (2) and appropriateamines. Reduction of 3 and 4 withNaBH₄ and subsequent protonation byHCl/CH₃OH resulted in25,27(2,2'-bis(ethoxybenzyl))-1,9-diaza-3,7-dithianonane-p-tert-butylcalix[4]arenedihydrogenchloride (7) and25,27(4,4'-bis(ethoxybenzyl))-1,9-diaza-3,7-dithianonane-p-tert-butylcalix[4]arenedihydrogenchloride (8), respectively. Complexation studies of 7 and 8 withZn(II), Cd(II) and Hg(II) ions were carried out bypotentiometric titration. Compounds 7 and8 selectively form 1 : 1 complexes with Hg(II), andtheir stability constants (log Ks) were estimated tobe 4.47 ± 0.08 and 3.20 ± 0.13, respectively. From spiecies distribution plots, 7 and 8were found to form the highest amount of 1 : 1 complexes with Hg(II) at pH 8.7 and 9.1, respectively.     

New Bis- and Tris-Ferrocenoyl and Tris-Benzoyl Lower-rim Substituted Calix[5]arene Esters: Synthesis,Electrochemistry and X-ray Crystal Structures

Abstract

New tris-benzoyl-, tris-ferrocenoyl- and bis-ferrocenoyl p-tert-butylcalix[5]arene esters have been synthesised (1–3 respectively) by reaction of the parent calixarene with the appropriate acid chloride. X-ray crystal structures of all three compounds have been determined with the structure of 2 revealing an ethanol guest molecule bound deep in the cavity of the calix[5]arene. The electrochemical properties of 2 have been extensively investigated using rotating disk electrode, cyclic and square wave voltammetric techniques. Electrochemical evidence is presented suggesting 2 has the capability of detecting neutral polar guest molecules, such as dimethylformamide, in dichloromethane solutions.     

Stereochemical control of calixarenes useful as rigid and conformationally diversiform platforms for molecular design

Stereochemical problems and related functions of calix[4]arenes, calix[6]arenes and their chiral derivatives have been reviewed. In p-tert-butylcalix[4]arene (1H₄) and its mono-, di-, tri-, and tetra-O-alkyl derivatives (1H₃R, 1H₂R₂,1HR₃, and 1R₄, respectively), 23 different homologues can exist (including 1H₄). We found that the OH group in the unmodified phenol unit is permeable through the calix[4]arene ring. Thus, several conformational isomers become equivalent after the ‘oxygen-through-the-annulus’ rotation of the OH group and the number of possible homologues is reduced to 13 (including 1H₃). We report in this paper the syntheses of all of these possible conformational isomers using a protection-deprotection method with a benzyl group and metal template effects. On the other hand, all possible chiral isomers that can be derived from calix[4]arene by modification of the OH groups have been systematically classified. Molecular asymmetry can be generated not only by different substituents but also by conformational isomerism. The numbers of chiral isomers are 17 for tetra-O-substituted calix[4]arenes, 9 for tri-O-substituted calix[4]arenes, 3 for di-O-substituted calix[4]arenes, and 0 for mono-O-substituted calix[4]arenes. Chiral calix[4]arenes can also be designed by the introduction of a substituent into the m-position of a phenol unit or by the use of a dissymmetric ‘stapling reaction’ in proximal phenol units. In p-tert-butylcalix[6]arene, the conformational behaviour is totally different from that in p-tert-butylcalix[4]arene. A large degree of conformational freedom remains in the framework, and both ‘oxygen-through-the-annulus rotation’ and ‘para-substituent-through-the-annulus rotation’ can take place. However, when metal cations are bound to calix[6]aryl esters, the conformation is changed to a cone type. Bridging and capping are powerful methods to immobilize the conformation of calix[6]arenes. In addition, definitive evidence for ring immobilization was obtained from the absence of racemization in the chiral calix[6]arene. A successful example of chiral recognition for α-amino acid derivatives was achieved by using chiral homooxacalix[3]arene which has ‘pseudo C₂ symmetry’. These examples indicate that calixarenes serve as rigid and conformationally diversiform platforms for the design of novel functional supramolecules.     

A Schiff basep-tent-butylcalix[4]arene. Synthesis and metal ion complexation

This communication describes the synthesis of Schiff base calix[4]arene (1) in which the Schiff base unit bridges two opposite hydroxy groups ofp-tert-butylcalix[4]arene. The synthesis of (1) has been achieved by refluxing in acetonitrile-methanol the appropriate 1,3-dicarbaldehyde-p-tert-butyl-calix[4]arene (4) with 1,3-diaminopropane. The yield of the reaction is 19%. Ligand (1) possesses a compartment containing two nitrogen atoms, four ether-type oxygen atoms, and two ionizable hydroxy groups likely to complex metal cations.     

Synthesis and conformation studies of multiple bridged p-tert-butylcalix[7]arene diphosphates

p-tert-Butylcalix[7]arene reacting with phosphorus pentachloride and then with water afforded two stereoisomers p-tert-butylcalix[7]arene diphosphates 2a and 2b, representing the first phosphorus multiple bridged calix[7]arene. The more accurate structure of 2a was investigated with the aid of Gaussian03 calculations.     

Fabrication and characterization of calix[4]arene Langmuir–Blodgett thin film for gas sensing applications

Microwave irradiation has been found to be a highly efficient method for etherification of p-tert-butylcalix[4]arene with alkyl bromides or ditosylate. The corresponding products were obtained as a pure form in modest yield within short reaction time when the reactions were performed under microwave irradiation.     

Synthesis of Oligomer and Styrene Polymer-supported Calix[4]arene Derivatives and Selective Extraction of Fe3+

Five new polymeric compounds containing more than one calix[4]arene have been synthesized by reacting an oligomer with 5,11,17,23-tetrakis[(diethylamino)methyl]-25,26,27,28-tetrahydroxycalix[4]arene (L1), 25,27-dimethyl-26,28-dihydroxy-p-tert-butylcalix[4]arene diketone (L2), and p-nitrocalix[4]arene (L3), and chloromethylated polystyrene with 25,27-dimethyl-26,28-dihydroxy-p-tert-butylcalix[4]arene diketone (L4) and p-nitrocalix[4]arene (L5). These compounds were studied by the selective extraction of Fe³⁺ cation from the aqueous phase into the organic phase and was carried out by using compounds L1–L5. It was observed that the polymer support attached to the lower rim of p-nitrocalix[4]arene was the most efficient carrier of Fe³⁺ in the extraction process.     

Inherently chiral biscalixarene cone–cone conformers consisting of calix[4]arene and calix[5]arene subunits

Inherently chiral biscalixarenes with hetero-cavities were synthesized by a covalent assembly of p-tert-butylcalix[5]arene with a 1,3-substituted calix[4]arene via 1,3-alkylation reaction and subsequent desymmetrization. The racemates were resolved by chiral HPLC method. ¹H NMR spectra, VT-NMR spectra, and theoretical calculations support that the calix[5]arene subunit of the inherently chiral calix[4][5]arene ester adopts a cone-in conformation, with the aromatic ring bearing the CH₂CO₂Et group tilting inward the calix[5]arene cavity. By contrast, such a cone-in structural feature of the calix[5]arene subunit disappears for the corresponding inherently chiral calix[4][5]arene carboxylic acid, due to the intramolecular hydrogen bonding between the carboxyl group and an ethereal oxygen of the glycolic chain.     

Synthesis of Tetraazide Derivatives of <Emphasis Type="Italic">p-tert</Emphasis>-Butylcalix[4]arene Using Copper-Catalyzed Nucleophilic Aromatic Substitution

Aromatic azido derivatives of p-tert-butylcalix[4]arene have been obtained for the first time using copper-catalyzed nucleophilic aromatic substitution of azide anion for bromide in 5,11,17,23-tetrabromo- 25,26,27,28-tetrabuthoxycalix[4]arene in a dioxane–water (3: 1) solvent mixture with N,N-dimethylethylenediamine as a stabilizing ligand for copper(I). When the reaction is carried out under with microwave heating, partial substitution products (mono-, distally di-, proximally di-, and trisubstituted) can be isolated in satisfactory yields.     

Synthetic and NMR Studies on Calix[n]Arene (n = 4,6,8) Triflates,Mesylates, and Tosylates

Abstract

The synthesis and full characterization of eight new calix[n]arene sulfonate esters including their conformational analysis were carried out. While p-tBucalix[6]arene and p-tBu-calix[8]arene esters are conformationally labile in the temperature interval of 25–100°C, p-tBu-calix[4]arene mono-and diesters were isolated as stable conformers at ambient temperature. Two 1,3-functionalised compounds of these derivatives, p-tert-butylcalix[4]arene ditriflate (5) and dimesylate (6) were shown unexpectedly high conformational stability up to 100°C by dynamic NMR measurements. The NMR measurements confirm the pinched-cone conformation for both derivatives. For the dealkylated calix[4]arene derivatives the partial cone conformer of the triesters have been obtained as major products in all cases.     

Azobenzene-bridged calix[8]arenes

An azobenzene bridge was introduced into the lower (or smaller) rim of p-tert-butylcalix[8]arene (1) and 1,5-calix[8]crown-3 (2) to form 1,4-singly bridged (3) and 1,5:3,7-doubly bridged (4) calix[8]arene derivatives, respectively. Trans and cis isomers of conformationally rigid 4 were isolated. The quantum yields of the trans-cis photoisomerisation reactions have been measured.     

Endo-cavity Complexes between Calix[6]arene Dianions and Aliphatic Ammonium Cations: Structure of a Hexylammonium Complex by X-ray Crystallography

The interactions of calix[6]arene and p-tert-butylcalix[6]arene with aliphatic amines in acetonitrile solution were studied by spectrophotometric titrations in the UV region and ¹H NMR spectrometry. Calix[6]arenes can undergo two deprotonations by aliphatic amines and the extent of the second proton transfer is mainly governed by the size of the α-substituent of the amine. ¹H NMR spectra show that the macrocycle adopts a 1,2,3-alternate conformation and that the α-hydrogens of the ammonium ions are shielded by the π-clouds of the aromatic rings. The X-ray crystal structure of the dihexylammonium complex of the p-tert-butylcalix[6]arene dianion, reported here, confirms the 1,2,3-alternate conformation and shows one of the two ammonium moieties encapsulated in the inner cavity of the macrocycle.     

DFT-calculated structure of protonated tetraphenyl p - tert -butylcalix[4]arene tetraketone

Using DFT calculations, two of the most probable structures (A, B) of the tetraphenyl p-tert-butylcalix[4]arene tetraketone·H₃O⁺ cationic complex species were derived. The hydroxonium ion H₃O⁺, placed in the coordination cavity formed by the calix[4]arene lower-rim groups, is bound by strong hydrogen bonds to the phenoxy oxygen atoms of the calix[4]arene ligand (structures A, B) and also to one carbonyl oxygen (structure B).     

Adsorption of direct black-38 azo dye on p-tert-butylcalix[6]arene immobilized material

The present study demonstrates the adsorption of the direct black-38 (DB-38) azo dye on potential and newly synthesized p-tert-butylcalix[6]arene based silica resin (4). Resin 4 was synthesized via the modification of pure silica 1 as 2 followed by the immobilization of p-tert-butylcalix[6]arene (3) onto modified silica (2). It was characterized by using different analytical techniques such as FT-IR, scanning electron microscopy (SEM) and thermo gravimetric analysis (TGA). The effect of adsorbent dosage, pH and the electrolyte effect on the removal of the DB-38 azo dye were evaluated through batch wise adsorption experiments. Maximum adsorption of 91% was achieved at pH 9.0. The textile wastewater samples were used to ensure the field applicability of the newly synthesized adsorbent 4 for the treatment of dye contaminated effluents. All results regarding the removal of the DB-38 azo dye from the aqueous environment prop up resin 4 as an effective adsorbent and it was found that resin 4 has high adsorption efficiency toward the DB-38 azo dye at a wide range of pH as compared to 1 and 2.     

Preparation and characterisation of thiol functionalised p-tert-butylcalix[4]arene-embedded polymer inclusion membranes: performance and selectivity

ABSTRACT

Here in we report the syntheses of the thiol functionalised p-tert-butylcalix[4]arene from the reaction of p-tert-butylcalix[4]arene-dialkylbromide derivative with thiourea. The structure of the thiol functionalised p-tert-butylcalix[4]arene was determined by using ¹HNMR, ¹³CNMR and elemental analysis techniques. Furthermore, the thiol functionalised p-tert-butylcalix[4]arene, cellulose triacetate (CTA) and 2-nitrophenyl octyl ether (o-NPPE) in dichloromethane were used to make a new calixarene-embedded polymer inclusion membrane (Bu^t-C@PIM). The surface and structure morphology of Bu^t-C@PIM was detected using thermogravimetric analysis, elemental analysis techniques and scanning electron microscopy. The affinity (the percentage of metal ion transferred from the source solution) of a PIM towards a range of divalent cations was found to follow the order Pb²⁺ > Zn²⁺ > Ni²⁺ > Cu²⁺ > Cd²⁺ > Co²⁺. The results also indicated that the transport efficiency of Bu^t-C@PIM was repeatable and may be beneficial in the development of a simplistic and highly influential trace metal recovery method from aqueous solution.     

Preparation and biological properties of inclusion compounds of calix[4]arene and 1,4-benzodiazepinone derivatives

The possibility of enhancing the oral bioavailability of certain 1,4-benzodiazepinones by using them as complexes with a series of calix[4]arene derivatives was examined. All the inclusion compounds prepared exhibit anticonvulsant activity by antagonism with Corazol spasmodic agent. Complexes with 25,27-bis[(hydrazinocarbonyl)methoxy]-26,28-dihydroxy-p-tert-butylcalix[4]arene exhibit higher pharmacological activity compared to the starting 7-bromo-5-(o-chloro)phenyl-and 1-hydrazinocarbonylmethyl-7-bromo-5-phenyl-1,2-dihydro-3H-1,4-benzodiazepin-2-ones.