Specific heat of the [NH<Subscript>2</Subscript>(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>]<Subscript>2</Subscript>ZnCl<Subscript>4</Subscript> crystal in the temperature region 80–300 K

The specific heat of [NH₂(CH₃)₂]₂ZnCl₄ was measured calorimetrically in the temperature region 80–300 K. As the temperature T decreases, the C _p (T) dependence indicates a phase transition sequence, with the phase transition at T₆=151 K observed for the first time. The thermodynamic characteristics of the crystal were refined. The transformation occurring at T₂=298.3 K is shown to be an incommensurate-commensurate phase transition.     

Measurements of the isotopic composition of UF<Subscript>6</Subscript> according to the fine structure of the IR absorption spectrum in the ν<Subscript>1</Subscript> + ν<Subscript>3</Subscript> band

Absorption spectra of the Q-branch of the ν₁ + ν₃ vibrational–rotational band of uranium hexafluoride (UF₆) recorded in a range of 1290.0–1292.5 cm^–1 using a laser spectrometer based on a quantum cascade laser have been studied. The spectra of samples with a natural isotopic composition (0.7% U²³⁵), an enriched sample (90% U²³⁵), and their gas mixtures (2, 5, and 20% U²³⁵) in a pressure range of 10–70 Torr at a temperature of T = 296 K have been analyzed. The experiments have revealed a highly reproducible fine structure of the recorded spectra. Periodic singularities in the fine-structure spectra have been interpreted as a manifestation of hot band transitions near the Q-branch. Anharmonicity constants X ₂₁, X ₃₁, and X ₃₂ and their combinations X _i1 + X _i3 (i = 4, 5, 6) have been determined. The characteristic features in the fine-structure spectra and the initial spectrum have been used to determine the isotopic composition of enriched UF₆ samples.     

Anomalous states of the structure of [Rb<Subscript>0.7</Subscript>(NH<Subscript>4</Subscript>)<Subscript>0.3</Subscript>]<Subscript>2</Subscript>SO<Subscript>4</Subscript> crystals in the temperature range 4.2–300 K

Crystals of [Rb_0.7(NH₄)_0.3]₂SO₄ solid solutions are studied using x-ray diffractometry in the temperature range 4.2–300 K. No anomalies are revealed in the temperature dependences of the lattice parameters and the volume of the host unit cell. A series of superstructure reflections observed along the basis axes corresponds to the guest lattice formed in the matrix of the host structure. From analyzing the axial ratio of these structures and their temperature dependences, it is concluded that the structure of the crystal has the form of an incommensurate composite. The guest structure of the composite at room temperature can be considered a set of chains that are not correlated along the b direction. In the plane perpendicular to the chain axes, these chains form a regular framework that is also incommensurate to the host lattice.     

Mössbauer and magnetic studies of the phase state of SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript>/La<Subscript>0.9</Subscript>Ca<Subscript>0.1</Subscript>MnO<Subscript>3</Subscript> composites

The formation of an intermediate phase in SrFe₁₂O₁₉/La_0.9Ca_0.1MnO₃ composites was demonstrated for the first time using only Mössbauer spectroscopy. The SrFe₁₂O₁₉/La_0.9Ca_0.1MnO₃ composite was prepared by the two-stage (sol–gel and hydrothermal) synthesis with varying initial conditions. The X-ray diffraction studies showed that the composite consisted of two phases: well-formed structures of manganite La_0.9Ca_0.1MnO₃ and hexagonal ferrite SrFe₁₂O₁₉. It was found that nanocrystalline La_0.9Ca_0.1MnO₃ particles with size d ? 150 nm formed in the composites at the surface of plate-like SrFe₁₂O₁₉ crystallites. The Mössbauer studies showed that the composite contained additional (intermediate) phase La_0.9Ca_0.1Mn(Fe)O₃ that formed at the interface between SrFe12O19 and La_0.9Ca_0.1MnO₃ phases. The intermediate phase concentration increased with the molar content of La_0.9Ca_0.1MnO₃; in this case, the fraction of the surface of SrFe₁₂O₁₉ crystallites coated with La_0.9Ca_0.1MnO₃ increased, which led to the increase in the total area of the interface surface and the intermediate phase concentration.     

<Superscript>2</Superscript>H NMR investigation of the transition to the proton glass state in the Cs<Subscript>5</Subscript>H<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> · 0.5H<Subscript>2</Subscript>O crystal

A crystal of the Cs₅H₃(SO₄)₄ · xH₂O (x ≈ 0.5) (PCHS) compound, which belongs to the family of proton conductors with a complex system of hydrogen bonds, is investigated by ²H NMR spectroscopy. The temperature and orientation dependences of the ²H NMR spectra are measured and analyzed. It is established that, upon transition to the glassy phase at the temperature T _g = 260 K, the parameters characterizing the proton exchange between positions in hydrogen bonds remain unchanged to within the limits of experimental error. The protons in the two-dimensional network of hydrogen bonds in the (001) plane are dynamically disordered over possible positions down to temperatures considerably lower than the glass transition point T _g . However, water molecules are fixed at particular structural positions in the phase transition range. In PCHS crystals with a nonstoichiometric water content, this circumstance can be responsible for the frustration that leads to the formation of the glassy state.     

Optical investigations of the clathrate α-Eu<Subscript>8</Subscript>Ga<Subscript>16</Subscript>Ge<Subscript>30</Subscript>

We performed measurements of the optical reflectivity in the energy range 0.007–30 eV on the clathrate-VIII type compound α-Eu₈Ga_{16- x}Ge_{30 x} in order to investigate its electronic band structure. The very low charge carrier concentration as well as ferromagnetic ordering of the divalent Eu ions below 10.5 K characterize the spectra at photon energies below ≃0.4 eV in accordance with the results of band structure calculations. Disorder induced bound states have been identified to affect the optical conductivity at energies between 10 and 100 meV.     

Origin of the structural local transition in the molecular impurity ion MnO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack> in the K<Subscript>3</Subscript>Na(CrO<Subscript>4</Subscript>)<Subscript>2</Subscript> ferroelastic

A new model is proposed for a local transition in a Jahn-Teller impurity center in a crystal with a ferroelastic (ferroelectric) phase transition. This model is based on direct interaction of the order parameter of the phase transition in the matrix with the Jahn-Teller impurity degrees of freedom. It is shown that, under these conditions, the order parameter field can induce lifting of degeneracy of the electronic states active in the Jahn-Teller effect, which is accompanied by a transition from the Jahn-Teller effect to the pseudo-Jahn-Teller effect with its subsequent suppression. As a result, a decrease in temperature gives rise to a structural local transition in the region of the low-symmetry ferroelastic (ferroelectric) matrix phase from the many-well local adiabatic to a single-well potential. The model proposed allows interpretation of experimental data obtained in an EPR study of the molecular impurity ion MnO ₄ ^2? in the K₃Na(CrO₄)₂ ferroelastic.     

Heat capacity of the [N(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>4</Subscript>]<Subscript>2</Subscript>CdBr<Subscript>4</Subscript> crystal in the temperature range 80–300 K

The heat capacity of the [[N(C₂H₅)₄]₂CdBr₄ crystal is measured by the calorimetric method in the temperature range from 80 to 300 K. It is revealed for the first time that the temperature dependence of the heat capacity C _p (T) exhibits an anomaly associated with the first-order phase transition occurring at the temperature T ₁ = 226.5 K. A long relaxation of the temperature of the crystal is observed in the temperature range 150–165 K.     

Influence of Matrix Nature on the Structural Characteristics of In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CeO<Subscript>2</Subscript> and SnO<Subscript>2</Subscript>–CeO<Subscript>2</Subscript> Composites Fabricated by the Impregnation Method

The structural characteristics, valence states, and distribution of cerium ions between the components in In₂O₃–CeO₂ and SnO₂–CeO₂ nanocomposites fabricated using the impregnation method were studied. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) were used to show that, during impregnation, cerium ions are not included into In₂O₃ crystals and are disposed only on their surface in the form of nano-sized crystallites or amorphous clusters. On the other side, under the contact of CeO₂ clusters with a surface of SnO₂ matrix crystals, cerium ions penetrate into the surface layer of these crystals. In contrast to an In₂O₃–CeO₂ system, where the addition of CeO₂ does not affect the conduction activation energy, where cerium oxide is added to SnO₂, the observed increase in the resistance of a SnO₂–CeO₂ composite is accompanied by a sufficient increase in activation energy. These data and the XPS spectra confirm the modification of the surface layers of conductive SnO₂ crystals as, a result of the penetration of cerium ions into these layers.     

Calculation of refractive indices for the (NH<Subscript>2</Subscript>CH<Subscript>2</Subscript>COOH)<Subscript>2</Subscript> · HNO<Subscript>3</Subscript> crystal

The refraction R of the diglycine nitrate (DGN) crystal, (NH₂CH₂COOH)₂ · HNO₃, in the para-and ferroelectric phases has been calculated in the model of noninteracting diatomic chemical bonds of the elementary unit cell of the crystal on the basis of the longitudinal and transversal polarizabilities of these bonds. The calculated magnitudes of the principal refractive indices n _p , n _m , and n _g and the orientations of the optical indicatrix of the crystal agree satisfactorily with experimentally observed values. Introducing the coefficient of Lorenz-Lorentz interaction x into the corresponding formula permits better agreement of the calculated and experimental refractive indices of DGN crystal to be obtained. The temperature changes of these x coefficients upon the ferroelectric phase transition in the DGN crystal have been analyzed.     

“Negative” gap in the spectrum of localized states of (In<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>0.9</Subscript>(SrO)<Subscript>0.1</Subscript>

The reflection R(?ω), transmission t(?ω), absorption α(?ω), and refraction n(?ω) spectra of polycrystalline In₂O₃–SrO samples with low optical transparency, which contain In₂O₃ and In₂SrO₄ crystallites with In₄SrO_{6 + δ} interlayers, are examined. In the region of small ?ω values, the reflection coefficient decreases as the resistance of samples saturated with oxygen increases. Spectral dependences n(?ω) and α(?ω) are calculated using the classical electrodynamics relations. The results are compared to the data based on the t(?ω) spectra. The calculated absorption spectra are interpreted within the model with an overlap of tails of the density of states in the valence band and in the conduction band. A “negative” gap E _gn in the density of states with a width from–0.12 to–0.47 eV is formed in highly disordered samples in this model. It is demonstrated that the high density of defects and the band of deep acceptor states of strontium in the major matrix In₂O₃ phase are crucial to tailing of the absorption edge and its shift toward lower energies. The direct gap E _gd = 1.3 eV corresponding to the In₂SrO₄ phase is determined. The energy band diagram and the contribution of tunneling, which reduces the threshold energy for interband optical transitions, are discussed.     

Theoretical study of the structure of lead zirconate–titanate PbZr<Subscript>0.6</Subscript>Ti<Subscript>0.4</Subscript>O<Subscript>3</Subscript>

A model of the structure of the piezoelectric ceramic lead zirconate–titanate PbZr_1–x Ti _x O₃ (PZT) is proposed. The model is based on ab initio calculations for possible local structures using the density functional theory (DFT) approach. A comparison of the calculated neutron diffraction data for local structures and the measured diffraction data obtained for actual powder samples shows there is a partially established long-range crystalline order in the material, in the sublattice of Zr and Ti cations.     

EPR study of the spin dynamics of the (La<Subscript>1−<Emphasis Type="Italic">y</Emphasis></Subscript>Pr<Subscript>y</Subscript>)<Subscript>0.7</Subscript>Ca<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> system

The EPR of Mn ions in the (La_1?yPr_y)_0.7Ca_0.3MnO₃ system has been studied within a broad range of temperatures (4<T<600 K) and Pr concentrations (0≤y≤1), as well as under isotope substitution of ¹⁸O for ¹⁶O. All compositions were shown to undergo transitions to a magnetically ordered state with decreasing temperature. Magnetic phase diagrams were constructed for systems with different oxygen isotopes. The diagrams include paramagnetic, ferromagnetic, and antiferromagnetic regions. In the paramagnetic region, at temperatures not too close to the phase transition points, the Mn ion linewidth ΔH _pp (T) is related to the magnetic susceptibility χ(T) through the relation ΔH _pp (T) = [χ₀/χ(T)]ΔH _pp (∞) + ΔH₀, where ΔH _pp (∞) is the width of the exchange-narrowed line in the high-temperature approximation, χ₀ ∝ 1/T is the susceptibility of noninteracting ions, and ΔH₀ is the residual width originating from the sample porosity and resonance-field scatter in unoriented grains of a powder sample. An analysis of the data on ΔH _pp (∞), ΔH₀, and χ(T) made it possible to estimate the symmetric and antisymmetric exchange interaction of Mn ions and of the noncubic crystal-field component of the oxygen ions. These parameters were found to be independent of the oxygen isotope species to within experimental error.     

Temperature dependence of the quenching of N<Subscript>2</Subscript> (C <Superscript>3</Superscript>Π<Subscript>u</Subscript>) by N<Subscript>2</Subscript> (X) and O<Subscript>2</Subscript> (X)

The temperature dependences of the quenching rate constants of the states N₂ (${\rm C} \ {^{3}{ \rm \Pi }_{u}}${\rm C} \ {^{3}{ \rm \Pi }_{u}} v^′=0,1) by N₂ (X) and of the state N₂ (${\rm C} \ {^{3}{ \rm \Pi }_{u}} \ v^{\prime}=0${\rm C} \ {^{3}{ \rm \Pi }_{u}} \ v^{\prime}=0) by O₂ (X) are studied. Time-resolved light emission from the gas was analyzed in the temperature range from 300 K to 210 K keeping the gas at constant density. In case of quenching by N₂ (X), the quenching rate constant for the vibrational level v^′= 0 increases by (13 ±3)% with gas cooling whereas the quenching rate constant for v^′= 1 decreases by (5.0 ±2.5)% in this temperature range. For quenching by O₂ (X), the quenching rate constant decreases by (3 ±2)% with gas cooling. The temperature variation of the N₂ (C ³Π_u v^′=0) emission intensity for pure nitrogen and dry air are calculated using the obtained quenching rate constants and is compared with the experimental data available in the literature.     

μSR study of Eu<Subscript>0.8</Subscript>Ce<Subscript>0.2</Subscript>Mn<Subscript>2</Subscript>O<Subscript>5</Subscript> and EuMn<Subscript>2</Subscript>O<Subscript>5</Subscript> multiferroics

A comparative μSR study of ceramic samples of the EuMn₂O₅ and Eu_0.8Ce_0.2Mn₂O₅ multiferroics is performed in the temperature range from 15 to 300 K. It is found that the Ce doping of the EuMn₂O₅ sample slightly reduces the temperature of the magnetic phase transition from T _N = 45 K for the EuMn₂O₅ sample to T _N = 42.5 K for the Eu_0.8Ce_0.2Mn₂O₅ sample. Below the temperature T _N for both samples, there are two types of localization of a thermalized muon with different temperature dependences of the precession frequency of the magnetic moment of the muon in an internal magnetic field. The higher frequency in both samples refers to the initial antiferromagnetic matrix. The behavior of this frequency in Eu_0.8Ce_0.2Mn₂O₅ follows the Curie–Weiss law with the exponent β = 0.29 ± 0.02, which differs from the value β = 0.39 standard for 3D Heisenberg magnetics and is observed in EuMn₂O₅, because of the strong frustration of the doped sample. The temperature-independent low frequency is due to the presence of Mn³⁺–Mn⁴⁺ ferromagnetic pairs located along the b axis of the antiferromagnetic matrix and in the regions of phase separation, which contain such ion pairs and e _g electrons recharging them. In both samples, polarization losses are the same (about 20%) and are associated with the formation of Mn⁴⁺–Mn⁴⁺ + Mu complexes near Mn³⁺–Mn⁴⁺ ferromagnetic pairs. In the temperature interval from 25 to 45 K, the separation of the Eu_0.8Ce_0.2Mn₂O₅ structure into two fractions where the relaxation rates of polarization of muons differ by an order of magnitude is revealed. This effect is due to a change in the state of regions of phase separation (1D superlattices) at the indicated temperatures. Such effect in EuMn₂O₅ is significantly weaker.     

High-Temperature Heat Capacity of Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>–Cu<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> Solid Solutions

Differential scanning calorimetry has been used to study the influence of temperature on the heat capacity of synthesized vanadates Zn₂V₂O₇, (Cu_0.56Zn_1.44)V₂O₇, and (Cu_1.0Zn_1.0)V₂O₇. It is found that dependences C_p = f(T) have extremes. The thermodynamic properties of Zn₂V₂O₇ have been determined.     

Magnetic and magnetoresistive properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sr<Subscript>2</Subscript>FeMoO<Subscript>6–δ</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoheterostructures

A method has been developed for fabricating nanoporous matrices based on anodic aluminum oxide for the deposition of ferromagnetic nanoparticles in them. The modes of deposition of strontium ferromolybdate thin films prepared by the ion-plasma method have been worked out, and the magnetic and magnetoresistive properties, structure, and composition of the films have been investigated. It has been revealed that the microstructure and properties of the strontium ferromolybdate films deposited by ionplasma sputtering depend on the deposition rate and the temperature of the substrate. Based on the measurement of the electrical resistivity of nanoheterostructures in a magnetic field, it has been found that the magnetoresistance reaches 14% at T = 15 K and B = 8 T, which is due to the manifestation of tunneling magnetoresistance.     

Preparation and characterization of organic–inorganic hybrid compound [N(C<Subscript>4</Subscript>H<Subscript>9</Subscript>)<Subscript>4</Subscript>]<Subscript>2</Subscript>Cu<Subscript>2</Subscript>Cl<Subscript>6</Subscript>

Organic–inorganic hybrid sample [N(C₄H₉)₄]₂Cu₂Cl₆ was prepared via the reaction between copper chloride and tetrabutylammonium chloride. The compound was characterized by X-ray powder diffraction, IR, Raman, differential scanning calorimetry (DSC), DTA-TGA analysis and electrical impedance spectroscopy. DSC studies indicate a presence of one-phase transition at 343 K. The complex impedance of compound [N(C₄H₉)₄]₂Cu₂Cl₆ have been investigated in temperature and frequency ranges 300–380 K and 200 Hz–5 MHz, respectively. The Z′ and Z″ versus frequency plots are well fitted to an equivalent circuit model. The circuits consist of the parallel combination of bulk resistance R _p and constant phase elements CPE. The frequency dependence of the conductivity is interpreted in term of Jonscher's law: s(w) = s_dc + Awⁿ \sigma (\omega ){ } = {\sigma_{\rm{dc}}} + { }A{\omega^n} . The conductivity follows the Arrhenius relation. The variation of the value of these elements with temperatures confirmed the availability of the phase transition at 343 K detected by DSC and electrical measurements.