Effect of terbium(III) chloride on the micellization properties of sodium decyl- and dodecyl-sulfate solutions

The effect of TbCl3 on the aggregation processes of the anionic surfactants sodium decyl sulfate (SDeS) and sodium dodecyl sulfate (SDS) has been investigated. Electrical conductivity data, combined with Tb(III) luminescence measurements suggest that the formation of micelles involving TbCl3 and SDS occurs at concentrations below the critical micelle concentration (cmc) of the pure surfactants; the formation of these mixed aggregates was also monitored by light scattering, which indicates that the addition of TbCl3 to surfactant concentration at values below the pure surfactant cmc results in a much greater light scattering than that found with pure sodium alkylsulfate surfactant micelles. This phenomenon is dependent upon the alkyl chain length of the surfactant. With Tb(III)/DS-, complexes are formed with a cation/anion binding ratio varying from 3 to 6, which depends upon the initial concentration of Tb(III). This suggests that the majority of the cation hydration water molecules can be exchanged by the anionic surfactant. When the carbon chain length decreases, interactions between surfactant and Tb(III) also decrease, alterations in conductivity and fluorescence data are not so significant and, consequently, no binding ratio can be detected even if existing. The surfactant micellization is dependent on the presence of electrolyte in solution with apparent cmc being lower than the corresponding cmc value of pure SDS.     

Aggregation and micellization of sodium dodecyl sulfate in the presence of Ce(III) at different temperatures: a conductometric study

Aggregation properties of sodium dodecyl sulfate (SDS) in the presence of cerium(III) chloride, at various temperatures (298.15-323.15 K) have been measured by the electrical conductance technique. The experimental data on aqueous solutions as a function of SDS concentration show the presence of two inflexion points indicating the presence of two distinct interaction mechanisms: the first, occurring at SDS concentrations below the critical micelle concentration of the pure surfactant, which can be explained by the formation of aggregates between dodecyl sulfate (DS-) and Ce(III), while the second one, at SDS concentrations around the critical micelle concentration (cmc) of the pure surfactant which is due to the SDS micellization. The aggregation between DS- and Ce(III) was confirmed by static light scattering. The binding ratio of DS-/Ce(III) changes from 6 to 4, shows a slight dependence on the Ce(III) concentration and is independent of the temperature. The thermodynamic micellization parameters, Gibbs energy, enthalpy and entropy of micellization were calculated on the basis of the experimental data for the aggregation concentration, and the degree of counterion dissociation of the micelles. The SDS micellization is energetically favoured by increasing either the concentration of CeCl3 or the temperature. Such behaviour is clearly dominated by a decrease of the micellization (exothermic) enthalpy. The entropy of micellization approaches zero as the cerium(III) chloride concentration and temperature increase.     

Surfactant--polymer aggregates formed by sodium dodecyl sulfate, poly(N-vinyl-2-pyrrolidone), and poly(ethylene glycol)

The interaction of sodium dodecyl sulfate (SDS) in aqueous solution with poly(N-vinyl-2-pyrrolidone) (M(w) = 55,000 g/mol) in the presence of poly(ethylene glycol) (M(w) = 8000 g/mol) is investigated by electrical conductivity, zeta potential measurements, viscosity measurements, fluorescence spectroscopy, and small-angle X-ray scattering (SAXS). The results indicate that SDS-polymer interaction occurs at low surfactant concentration, and its critical aggregation concentration is fairly dependent on polymer composition. The polymer-supported micelles have average aggregation numbers dependent on surfactant concentration, are highly dissociated when compared with aqueous SDS micelles, and have zeta potentials that increase linearly with the fraction of PVP at constant SDS concentration. The analysis of the SAXS measurements indicated that the PVP/PEG/SDS system forms surface-charged aggregates of a cylindrical shape with an anisometry (length to cross-section dimension ratio) of about 3.0.     

正离子型疏水改性聚氧乙烯单成相组分双水相系统的相行为

对正离子型疏水改性聚氧乙烯(HM-EO)单成相组分双水相系统的相行为进行了考察,并分析其电荷特性.HM-EO在水溶液中呈现两亲性,可以形成胶束,进而形成带电的胶束簇集体.通过改变溶液的pH值、盐浓度及添加带相反电荷的表面活性剂SDS,可改变胶束簇集体的带电状态,从而影响系统的相行为.增大pH值,有利于系统的分相.盐的添加也可以增大双水相两相区域,正离子影响次序为K+>Na+,负离子次序为SO42->F->Cl->Br->I-.进一步考察了HM-EO和SDS之间的相互作用,结果表明SDS能与HM-EO形成混合胶束簇集体,改变HM-EO双水相系统的带电特性.     

Bovine serum albumin (BSA) plays a role in the size of SDS micelle-like aggregates at the saturation binding: the ionic strength effect

The influence of ionic strength on the complexes formed by natural bovine serum albumin (BSA), pH 5.4 (near the isoelectric point), and sodium dodecyl sulfate (SDS) in aqueous buffered (sodium acetate) solution was investigated by using surface tension, fluorescence and small angle X-ray scattering (SAXS) techniques. Ionic strength was varied by changing sodium acetate buffer concentration from 0.020 to 0.5 M. Surface tension revealed that SDS:BSA saturation binding occurs at psp = 42 +/- 2 mM, independent of the solution ionic strength. Further, SAXS curves are consistent with the necklace and bead model, where micelle-like aggregates are randomly distributed along the partial unfolded protein. Micelle-like aggregates grow from small spheres at 10 mM SDS to small ellipsoids (upsilon = 1.3 , ratio between the largest and the shortest axes) near psp, in good agreement with micellar aggregation numbers obtained by fluorescence, independent of salt concentration. Protein-bound micelles stop growing above psp and further SDS addition induces free-micelle formation.     

含铕荧光两亲接枝共聚物的制备及胶束化行为

以丙烯酸(AA)、 苯甲酸(BA)和邻菲啰啉(Phen)为配体, Eu³⁺为中心离子, 制备了可聚合荧光配合物单体, 并以此单体为功能单体, 聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)和甲基丙烯酸六氟丁酯(HFMA)为共聚单体, 通过溶液聚合制备出含铕两亲荧光接枝共聚物P-[HFMA-co-Eu(AA)(BA)₂Phen]g-PEG. 利用红外光谱(FTIR)和核磁共振波谱(¹H NMR和¹⁹F NMR)对共聚物的结构进行表征; 采用表面张力法测定共聚物的临界胶束浓度(cmc)为0.20 g/L; 通过透射电子显微镜(TEM)和动态光散射仪(DLS)观察胶束的形貌及其胶束化行为, 发现该共聚物可以形成大小均一的球形胶束, 且随着共聚物浓度的提高, 胶束粒径相应增大; 在溶液浓度达到临界胶束浓度时, 溶液荧光出现强度突变.     

The Hybrids of Polystyrene-block-Poly(ethylene Oxide) Micelles and Sodium Dodecyl Sulfate in Aqueous Solutions: Interaction with Rh Ions and Rh Nanoparticle Formation

The interaction of amphiphilic block copolymer, polystyrene-block-poly(ethylene oxide) (PS-b-PEO), with anionic surfactant, sodium dodecyl sulfate (SDS), in aqueous media has been studied by sedimentation in ultracentrifuge. Three well-defined populations of hybrid aggregates corresponding to micelles, micellar clusters, and supermicellar aggregates were detected in the PS-b-PEO/SDS aqueous solutions at various rotation rates. Parameters of all the micellar aggregates were characterized depending on the SDS loading. An increase in the SDS loading was found to result in an increase in block copolymer/surfactant micelle size and weight at the SDS concentration of 0.8x10(-3) mol/L and in a slight decrease of both parameters at critical micelle concentration and at higher concentration. This decrease was caused by incorporation of SDS molecules in block copolymer micelles followed by charging the PS core and repulsion between similar charges. Using dichlorotetrapyridine rhodium(III)chloride hexahydrate ([Rh(Py)(4)Cl(2)]Clx6H(2)O), ion exchange of surfactant counterions in the hybrid PS-b-PEO/SDS system for Rh cations was carried out, which allowed saturating the micellar structures with Rh species. Subsequent reduction of the Rh-containing hybrid solutions with NaBH(4) resulted in the formation of Rh nanoparticles with a diameter of 2-3 nm mainly located in the block copolymer micellar aggregates. Copyright 2000 Academic Press.     

“配位诱导”铕(III)/聚乙二醇-聚丙烯酸嵌段聚合物胶束的研究

研究了稀土金属铕(Ⅲ)-联吡啶(bpy)有机配合物与双亲水性两嵌段聚合物聚乙二醇-聚丙烯酸(PEO₁₁₃-b-PAA₈₂)在不同溶剂中[V(水)∶V(乙醇)＝7.5∶1, 5∶1]通过“配位诱导”作用在水中形成配合物胶束的过程. 荧光光谱结果表明Eu(Ⅲ)分别与bpy和PAA发生配位, Eu(Ⅲ)与PAA中羧基的配位使聚合物发生交联在水性溶剂中形成了配合物胶束. 用动态激光光散射(DLS), 原子力显微镜(AFM)和透射电镜(TEM)等测试方法对配合物胶束的形态及尺寸进行了表征.     

Capillary electrophoresis study on the micellization and critical micelle concentration of sodium dodecyl sulfate. Influence of solubilized solutes

The influence of solubilized solutes on the micellization and critical micelle concentration (CMC) of sodium dodecyl sulfate (SDS) were investigated by means of capillary electrophoresis (CE). Three different structural types of test solutes, including chloropyridines. chlorophenols and cephalosporins with different binding strength to SDS micelles, were selected in this study. The variations of the effective electrophoretic mobility of these solutes as a function of SDS concentration in the premicellar and micellar regions were analyzed. Interestingly, the results indicate that, in the presence of these solubilized solutes, the micellization of SDS may occur over a range of SDS concentration, with the aggregate size increasing over this range. Depending on the nature of solubilized solutes and the extent of the interactions between solubilized solutes and SDS micelles, the CMC value of SDS may vary significantly. The incorporation of solubilized solutes into SDS micelles to form mixed micelles is proposed to interpret the migration behavior of solubilized solutes in CE.     

Effect of NaCl on the self-aggregation of n-octyl beta-D-thioglucopyranoside in aqueous medium

This report investigates the effect of sodium chloride (NaCl) on the micellization, surface activity, and the evolution in the shape and size of n-octyl beta-D-thioglucopyranoside (OTG) aggregates. By using surface tension measurements, information was obtained on both changes in the critical micelle concentration and adsorption behavior in the air-liquid interface with the electrolyte concentration. These data were used to obtain the thermodynamic properties of micellization along with the corresponding adsorption parameters in the air-liquid interface. From extended static and dynamic light scattering measurements, the micelle molecular weight, the mean aggregation number, and the second virial coefficient, the apparent diffusion coefficient and the mean hydrodynamic radius of micelles in a range of NaCl concentrations were obtained. The light scattering data have shown that when the surfactant concentration is lower to 4.5 g/L, only spherical micelles are formed. However, an increase in the surfactant concentration induces an increase in micellar size, suggesting a rodlike growth of the micelles. This deviation of micelle geometry from spherical to rodlike is supported both by the ratio between the hydrodynamic radius and the radius of gyration and by the angular dependence of light scattering. On the other hand, the studies performed in the presence of high NaCl concentration (0.2 and 0.5 M) provide strong support for the view that the micelles may overlap together to form an entangled network above certain crossover concentration.     

Supramolecular formation of triblock copolymers in polar/nonpolar solvents

Triblock copolymers could form supramolecules in either polar or nonpolar solvents at appropriate concentration and temperature ranges or in the presence of additives. The association properties and the structure of supramolecules of PEO-PPO-PEO and PPO-PEO-PPO (PEO and PPO refer to poly(oxyethylene) and poly(oxypropylene), respectively) triblock copolymers in xylene and/or water were investigated by using light scattering, small-angle neutron scattering, and small-angle X-ray scattering. The association process of aqueous solution or water-rich ternary systems was entropy driven and temperature played an important role. The additive, e.g., water in the oil-rich ternary system, played a very important role on the micellization of PEO-PPO-PEO, e.g., Pluronic L64, in xylene. The micelles had a core-shell structure and the micellar shell was rather heavily solvated. At high copolymer concentrations, large aggregates with a lamellar structure was formed and the amount of large aggregates increased with increasing copolymer concentration before gel formation.     

Interaction between casein and sodium dodecyl sulfate

The interaction of the anionic surfactant sodium dodecyl sulfate (SDS) with 2.0 mg/ml casein was first investigated using isothermal titration calorimetry (ITC), dynamic light scattering (DLS), and fluorescence spectra. ITC results show that individual SDS molecules first bind to casein micelles by the hydrophobic interaction. The micelle-like SDS aggregate is formed on the casein chains when SDS concentration reaches the critical aggregation concentration (c1), which is far below the critical micellar concentration (cmc) of SDS in the absence of casein. With the further increase of SDS concentration to the saturate binding concentration c2, SDS molecules no longer bind to the casein chains, and free SDS micelles coexist with casein micelles bound with SDS aggregates in the system. DLS results show that the addition of SDS leads to an increase in the hydrodynamic radius of casein micelles with bound surfactant at SDS concentration higher than 4 mM, and also an increase in the casein monomer molecule (or submicelles) at SDS concentration higher than 10 mM. Fluorometric results suggest the addition of SDS leads to some changes in the binding process of hydrophobic probes to casein micelles.     

Study of mixed micellar aqueous solutions of sodium dodecyl sulfate and amino acids

Thermodynamic properties of sodium dodecyl sulfate (SDS) in micellar aqueous solutions of L-serine and L-threonine were determined by fluorescence spectroscopy and dynamic light scattering techniques. The values of Gibbs free energy, enthalpy and entropy of the process of micelle formation were calculated using the critical micelle concentration and degree of dissociation. Changes in critical micelle concentration of SDS with the addition of amino acids were examined by both conductivity and pyrene I ₁/I ₃ ratio methods at different temperatures. The pyrene fluorescence spectra were used to study the change of micropolarity produced by the interaction of SDS with amino acids. The aggregation behavior of SDS was explained in terms of structural changes in mixed solutions. The data on dynamic light scattering suggest that size of SDS micelles was influenced by the presence of amino acids.     

Thermodynamic Characteristics of the Micellization in Droplet and Quasi-Droplet Models of Surfactant Molecular Aggregates with Account of Experimental Data on Equilibrium Micelle Distribution

Formuals for the thermodynamic characteristics of micellization in the droplet and quasi-droplet models of surfactant molecular aggregates are derived. These formulas account for the experimental data on the mean size of micelles and average statistical scatter of their sizes in the equilibrium state. These formulas cover critical micellization concentration corresponded to the onset of surfactant accumulation in micelles and higher (than CMC) concentrations at which micelles incorporate noticeable or even the largest portion of surfactant in micellar solution. Analytical dependence of thermodynamic characteristics of micellization on the initial parameters of droplet and quasi-droplet models of molecular aggregates at critical micellization concentration is disclosed.     

Polystyrene-block-polyglycidol micelles cross-linked with titanium tetraisopropoxide. laser light and small-angle X-ray scattering studies on their formation in solution

Hybrid micelles from polystyrene-block-polyglycidol (PS-b-PG) copolymers with chemically cross-linked cores by titanium tetraisopropoxide (Ti(OC(3)H(7))(4)) were prepared in toluene solution. Additionally, micellization of PS-b-PG copolymers with different mass fractions of polyglycidol (x(PG)), was studied by static and dynamic light scattering as well as small-angle X-ray scattering. It was observed that copolymers with x(PG) smaller than 0.5 self-assembled in toluene into spherical core-shell micelles with hydrodynamic radii R(h) between 12 and 23 nm. On the other hand, copolymers with larger PG content formed particles with R(h) = 50-70 nm and aggregation numbers of several thousands. The presence of these aggregates in solution was attributed to the nonequilibrated form of block copolymers upon dissolving, most probably due to hydrogen bonding. In the following, spherical PS-b-PG micelles were loaded in toluene with hydrochloric acid and titanium tetraisopropoxide. Confined hydrolysis of Ti(OC(3)H(7))(4) induced by HCl in the micellar core was confirmed by small-angle X-ray scattering experiments. The subsequent condensation of the precursor with hydroxyl groups of polyglycidol chains led to covalently stabilized hybrid organic-inorganic particles. The presence of cross-linked PS-b-PG micelles was proven in two ways. First, micelles with "frozen" core showed stable hydrodynamic size in time upon dilution below critical micellization concentration while non-cross-linked PS-b-PG micelles underwent disintegration under the same conditions within several hours. Second, light scattering experiments revealed the presence of stable, swollen particles in N,N-dimethylformamide, which is a good solvent for both blocks.     

Micellization of Sodium Dodecyl Sulfate in Glycerol Aqueous Mixtures

The effect of glycerol on both micellar formation and the structural evolution of the sodium dodecyl sulfate (SDS) aggregates in the context of the action mechanism of the cosolvent has been studied. The critical micelle concentration and the degree of counterion dissociation of the surfactant over a temperature range from 20°C to 40°C were obtained by the conductance method. The thermodynamic parameters of micellization were estimated by using the equilibrium model of micelle formation. The analysis of these parameters indicated that the lower aggregation of the surfactant is mainly due to a minor cohesive energy of the mixed solvent system in relation to the pure water. The effect of glycerol on the mean aggregation number of the micelles of SDS was analyzed by the static quenching method. It was found that the aggregation number decreased with the glycerol content. This reduction in the micellar size seems to be controlled by an increase in the surface area per headgroup, which was ascribed to a participation of glycerol in the micellar solvation layer. Studies on the micropolarity of the aggregates, as sensed by the probe pyrene, indicated that this microenvironmental parameter is almost unaffected by the presence of glycerol in the mixture. However, an increase in the micellar microviscosity at the surface region was observed from the photophysical behavior of two different probes, rhodamine B and auramine O. These results suggest a certain interaction of the cosolvent in the micellar solvation of SDS micelles.     

H-aggregation of cationic palladium-porphyrin as a function of anionic surfactant studied using phosphorescence, absorption and RLS spectra

Room temperature phosphorescence (RTP) was used as a useful analytical tool to investigate the interaction behavior between tetracationic meso-tetrakis (4-trimethylaminophenyl) porphyrin palladium (Pd-TAPP) and anionic sodium dodecyl sulfate (SDS). UV-vis absorption and resonance light scattering (RLS) were further applied to characterize the system. It was presumably suggested that nonspecific self-aggregates among porphyrins formed considering the relatively high concentration of Pd-TAPP. Furthermore, Pd-TAPP changed from free monomer/nonspecific aggregate to H-aggregate and then to out-micellized monomer/nonspecific aggregate as a function of SDS concentration. The fact that RTP signal enhanced obviously and excitation spectrum was blue-shifted by 1580cm(-1) in energy with respect to energy of free Pd-TAPP monomer demonstrated that 1:4 electrostatic interaction between Pd-TAPP and SDS led to the formation of the premicellar porphyrin-surfactant H-aggregates. The RLS spectrum reviewed that the formed H-aggregates were multiple porphyrin units, and UV-vis spectra revealed that cationic groups of monomers/nonspecific aggregates of Pd-TAPP were electrostatically attracted in favor of the surface of anionic micelles but were not encapsulated within apolar regions of SDS micelles when the concentration of SDS was above its critical micelle concentration (CMC).     

Comprehensive study on critical micellar concentrations of SDS in acetonitrile–water solvents

The CMC is one of the fundamental characteristics of surfactants and its determination is crucial for detail understanding of micelles formation. In this study the CMC of SDS in presence of ACN was determined by two independent experimental techniques, capillary electrophoresis and fluorescence correlation spectroscopy (FCS). Yet, studies of SDS micellization in solutions containing ACN as organic modifier are sparse and inconsistent in literature. The measurements were performed for various ACN contents in the range of 0–50% v/v. At ACN contents of up to 10% v/v the CMC is lower when compared to the aqueous solution, while increasing ACN content causes a significant increase of the CMC. Formation of micelles was observed up to ACN concentrations of 35% v/v, which is in contrast to most of the reports in literature. Based on the results of the FCS experiments, we were able to confirm that presence of ACN causes a gradual increase of the size of the micelles with increasing concentration of SDS. Simultaneously, we proved that the classical conductivity approach for the determination of the CMC does not yield reliable results in the presence of higher content of an organic modifier such as ACN.     

The physicochemical and thermophysical properties of sodium dodecyl sulfate: The influence of p-toluene sulfonyl chloride and temperature

In the present study, we report on the interaction between a hydrotrope, p-toluene sulfonyl chloride (p-TSC), and an anionic surfactant, sodium dodecyl sulfate (SDS) which has been performed using electrical conductivity, Fourier transform infrared (FTIR), ¹H NMR, density, dynamic viscosity, and kinematic viscosity measurements. The effect of p-TSC on the micellization of SDS in non-aqueous (ethanol) medium at various temperatures (viz., 298.15, 303.15, 308.15, 313.15, 318.15, and 323.15 K) was investigated using the electrical conductivity method. The results show that the CMC value increases as the concentration of the hydrotrope is increased. It is noteworthy that at higher concentrations of hydrotrope, the trend of micelle formation is reversed (i.e., reverse micelles are formed). The thermodynamic parameters in micellization have also been evaluated. The FTIR and ¹H NMR data reveal the physicochemical properties of the pure and mixed systems and confirm no covalent bond formation takes place. Density, dynamic viscosity, and kinematic viscosity of the pure as well as mixed systems at various temperatures were also reported.     

Micellar copolymerization of associative polymers: study of the effect of acrylamide on sodium dodecyl sulfate-poly(propylene oxide) methacrylate mixed micelles

Mixed micelles of sodium dodecyl sulfate (SDS) and poly(propylene oxide) methacrylate (PPOMA) have been studied in the presence of acrylamide using conductimetry, fluorescence spectroscopy, and small-angle neutron scattering (SANS) under the following conditions: (i) the SDS-acrylamide binary system in water; (ii) the SDS-acrylamide-PPOMA ternary system in water. The addition of acrylamide in SDS solutions perturbs the micellization of the surfactant by decreasing the aggregation number of the micelles and increasing their ionization degree. The variations of the various micellar parameters versus the weight ratio R=PPOMA/SDS are different in the presence of acrylamide or in pure water. These differences are much more pronounced for the lower than for the higher PPOMA concentrations. There is competition between acrylamide and PPOMA and at higher PPOMA concentration, acrylamide tends to be released from SDS micelles and is completely replaced by PPOMA.