Evaluation of Biogas Production Potential by Dry Anaerobic Digestion of Switchgrass–Animal Manure Mixtures

Anaerobic digestion is a biological method used to convert organic wastes into a stable product for land application with reduced environmental impacts. The biogas produced can be used as an alternative renewable energy source. Dry anaerobic digestion [>15% total solid (TS)] has an advantage over wet digestion (<10% TS) because it allows for the use of a smaller volume of reactor and because it reduces wastewater production. In addition, it produces a fertilizer that is easier to transport. Performance of anaerobic digestion of animal manure–switchgrass mixture was evaluated under dry (15% TS) and thermophilic conditions (55 °C). Three different mixtures of animal manure (swine, poultry, and dairy) and switchgrass were digested using batch-operated 1-L reactors. The swine manure test units showed 52.9% volatile solids (VS) removal during the 62-day trial, while dairy and poultry manure test units showed 9.3% and 20.2%, respectively. Over the 62 day digestion, the swine manure test units yielded the highest amount of methane 0.337 L CH₄ /g VS, while the dairy and poultry manure test units showed very poor methane yield 0.028 L CH₄/g VS and 0.002 L CH₄/g VS, respectively. Although dairy and poultry manure performed poorly, they may still have high potential as biomass for dry anaerobic digestion if appropriate designs are developed to prevent significant volatile fatty acid (VFA) accumulation and pH drop.     

Recent Advances and Future Perspectives of Metal-Based Electrocatalysts for Overall Electrochemical Water Splitting

Recently, the growing demand for a renewable and sustainable fuel alternative is contingent on fuel cell technologies. Even though it is regarded as an environmentally sustainable method of generating fuel for immediate concerns, it must be enhanced to make it extraordinarily affordable, and environmentally sustainable. Hydrogen (H₂) synthesis by electrochemical water splitting (ECWS) is considered one of the foremost potential prospective methods for renewable energy output and H₂ society implementation. Existing massive H₂ output is mostly reliant on the steaming reformation of carbon fuels that yield CO₂ together with H₂ and is a finite resource. ECWS is a viable, efficient, and contamination-free method for H₂ evolution. Consequently, developing reliable and cost-effective technology for ECWS was a top priority for scientists around the globe. Utilizing renewable technologies to decrease total fuel utilization is crucial for H₂ evolution. Capturing and transforming the fuel from the ambient through various renewable solutions for water splitting (WS) could effectively reduce the need for additional electricity. ECWS is among the foremost potential prospective methods for renewable energy output and the achievement of a H₂-based economy. For the overall water splitting (OWS), several transition-metal-based polyfunctional metal catalysts for both cathode and anode have been synthesized. Furthermore, the essential to the widespread adoption of such technology is the development of reduced-price, super functional electrocatalysts to substitute those, depending on metals. Many metal-premised electrocatalysts for both the anode and cathode have been designed for the WS process. The attributes of H₂ and oxygen (O₂) dynamics interactions on the electrodes of water electrolysis cells and the fundamental techniques for evaluating the achievement of electrocatalysts are outlined in this paper. Special emphasis is paid to their fabrication, electrocatalytic performance, durability, and measures for enhancing their efficiency. In addition, prospective ideas on metal-based WS electrocatalysts based on existing problems are presented. It is anticipated that this review will offer a straight direction toward the engineering and construction of novel polyfunctional electrocatalysts encompassing superior efficiency in a suitable WS technique.     

Solar Hydrogen Generation from Lignocellulose

Photocatalytic reforming of lignocellulosic biomass is an emerging approach to produce renewable H₂. This process combines photo‐oxidation of aqueous biomass with photocatalytic hydrogen evolution at ambient temperature and pressure. Biomass conversion is less energy demanding than water splitting and generates high‐purity H₂ without O₂ production. Direct photoreforming of raw, unprocessed biomass has the potential to provide affordable and clean energy from locally sourced materials and waste.     

Codigestion of manure and organic wastes in centralized biogas plants: status and future trends

Centralized biogas plants in Denmark codigest mainly manure, together with other organic waste such as industrial organic waste, source sorted household waste, and sewage sludge. Today 22 large-scale centralized biogas plants are in operation in Denmark, and in 2001 they treated approx 1.2 million tons of manure as well as approx 300,000 of organic industrial waste. Besides the centralized biogas plants there are a large number of smaller farm-scale plants. The long-term energy plan objective is a 10-fold increase of the 1998 level of biogas production by the year 2020. This will help to achieve a target of 12-14% of the national energy consumption being provided by renewable energy by the year 2005 and 33% by the year 2030. A major part of this increase is expected to come from new centralized biogas plants. The annual potential for biogas production from biomass resources available in Denmark is estimated to be approx 30 Peta Joule (PJ). Manure comprises about 80% of this potential. Special emphasis has been paid to establishing good sanitation and pathogen reduction of the digested material, to avoid risk of spreading pathogens when applying the digested manure as fertilizer to agricultural soils.     

Alkali Niobate and Tantalate Perovskites as Alternative Photocatalysts

Alkali tantalates and niobates are listed as important photocatalysts for the development of renewable energy technologies and environmental remediation. Herein, the photocatalytic degradation of methylene blue dye in aqueous solution by using highly crystalline particles with perovskite‐like structures, LiTaO₃, LiNbO₃, NaTaO₃, NaNbO₃, KNbO₃, and KTaO₃, is investigated. It is demonstrated that ferroelectric KNbO₃ is the most efficient photocatalyst of those tested because it combines an electronic band structure that can respond successfully to UVA light with a relatively high surface energy that enhances the catalytic properties. Additionally, the built‐in electric field due to internal polarization of ferroelectric particles may contribute to the unique properties of this functional photocatalyst. This work provides an ideal platform for the rational design of more efficient ferroelectric‐based photocatalytic devices.     

Copper Oxide-Based Photocatalysts and Photocathodes: Fundamentals and Recent Advances

This work aims at reviewing the most impactful results obtained on the development of Cu-based photocathodes. The need of a sustainable exploitation of renewable energy sources and the parallel request of reducing pollutant emissions in airborne streams and in waters call for new technologies based on the use of efficient, abundant, low-toxicity and low-cost materials. Photoelectrochemical devices that adopts abundant element-based photoelectrodes might respond to these requests being an enabling technology for the direct use of sunlight to the production of energy fuels form water electrolysis (H₂) and CO₂ reduction (to alcohols, light hydrocarbons), as well as for the degradation of pollutants. This review analyses the physical chemical properties of Cu₂O (and CuO) and the possible strategies to tune them (doping, lattice strain). Combining Cu with other elements in multinary oxides or in composite photoelectrodes is also discussed in detail. Finally, a short overview on the possible applications of these materials is presented.     

Anaerobic treatment of animal byproducts from slaughterhouses at laboratory and pilot scale

Different mixtures of animal byproducts, other slaughterhouse waste (i.e., rumen, stomach and intestinal content), food waste, and liquid manure were codigested at mesophilic conditions (37°C) at laboratory and pilot scale. Animal byproducts, including blood, represent 70–80% of the total biogas potential from waste generated during slaughter of animals. The total biogas potential from waste generated during slaughter is about 1300 MJ/cattle and about 140 MI/pig. Fed-batch digestion of pasteurized (70°C, 1h) animal byproducts resulted in a fourfold increase in biogas yield (1.14L/g of volatile solids [VS]) compared with nonpasteurized animal bypproducts (0.31L/g of VS). Mixtures with animal byproducts representing 19–38% of the total dry matter were digested in continuous-flow stirred tank reactors at laboratory and pilot scale. Stable processes at organic loading rates (OLRs) exceeding 2.5g of VS/(L·d) and hydraulic retention times (HRTs) less than 40 d could be obtained with total ammonia nitrogen concentrations (NH₄−N+NH₃−N) in the range of 4.0–5.0 g/L. After operating one process for more than 1.5 yr at total ammonia nitrogen concentrations >4 g/L, an increase in OLR to 5 g of VS/(L·d) and a decrease in HRT to 22 d was possible without accumulation of volatile fatty acids.     

Nanostructures for Electrocatalytic CO2 Reduction

One of the most effective ways to cope with the problems of global warming and the energy shortage crisis is to develop renewable and clean energy sources. To achieve a carbon-neutral energy cycle, advanced carbon sequestration technologies are urgently needed, but because CO₂ is a thermodynamically stable molecule with the highest carbon valence state of +4, this process faces many challenges. In recent years, electrochemical CO₂ reduction has become a promising approach to fix and convert CO₂ into high-value-added fuels and chemical feedstock. However, the large-scale commercial use of electrochemical CO₂ reduction systems is hindered by poor electrocatalyst activity, large overpotential, low energy conversion efficiency, and product selectivity in reducing CO₂. Therefore, there is an urgent need to rationally design highly efficient, stable, and scalable electrocatalysts to alleviate these problems. This minireview also aims to classify heterogeneous nanostructured electrocatalysts for the CO₂ reduction reaction (CDRR).     

Achievements,Challenges, and Perspectives on Nitrogen Electrochemistry for Carbon-Neutral Energy Technologies

Unrestrained anthropogenic activities have severely disrupted the global natural nitrogen cycle, causing numerous energy and environmental issues. Electrocatalytic nitrogen transformation is a feasible and promising strategy for achieving a sustainable nitrogen economy. Synergistically combining multiple nitrogen reactions can realize efficient renewable energy storage and conversion, restore the global nitrogen balance, and remediate environmental crises. Here, we provide a unique aspect to discuss the intriguing nitrogen electrochemistry by linking three essential nitrogen-containing compounds (i.e., N₂, NH₃, and NO₃⁻) and integrating four essential electrochemical reactions, i.e., the nitrogen reduction reaction (N₂RR), nitrogen oxidation reaction (N₂OR), nitrate reduction reaction (NO₃RR), and ammonia oxidation reaction (NH₃OR). This minireview also summarizes the acquired knowledge of rational catalyst design and underlying reaction mechanisms for these interlinked nitrogen reactions. We further underscore the associated clean energy technologies and a sustainable nitrogen-based economy.     

Bio-inspired Design of Bidirectional Oxygen Reduction and Oxygen Evolution Reaction Molecular Electrocatalysts

The proper utilization of renewable energy sources has emerged as a major challenge in our pursuit of a sustainable and carbon-neutral energy landscape. Small molecule activation is a key component for proper utilization of renewable energy resources, where O₂/H₂O redox couple is reckoned to be a potential game changer. In this regard, electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have become the prime interest of catalyst designers. Typically, these ORR and OER electrocatalysts are developed distinctly; however, very soon, the requirement of a bidirectional ORR/OER electrocatalyst becomes obvious for practical applicability and rapid energy transduction purposes. A bidirectional catalyst is defined as a catalyst capable of driving a redox reaction in opposing directions. This review has portrayed the development of enzyme structure-inspired design of molecular bidirectional ORR/OER catalysts. The strategic incorporation of secondary and outer coordination sphere features has significantly enhanced the performance of these catalysts, which can be monitored via the key catalytic parameters. These bifunctional OER/ORR catalysts are vital for metal-air battery and fuel cell applications and appropriately poised to lay the foundation for an efficient, economical, and eco-friendly pathway for sustainable energy usage with the rational assembly of energy converting and storage devices.     

Optimization of inoculum to substrate ratio for enhanced methane yield from leather fleshings in a batch study

One of the most significant issues of the last few decades has been tracing for renewable energy sources. Animal fleshing (ANFL) is the most common proteinaceous solid waste accured during the production of leather and it must be disposed of in an environmentally responsible manner. This paper is attempts to assess the biogas production from solid waste originating from the chrome based tannery. Anaerobic digestion of these wastes will be a viable option for waste stabilization and energy production in the form of biogas to be utilized in the industry. The bio-methane potential of the wastes were examined by mixing these wastes with various sources of inoculum and different inoculum to substrate (I/S) ratio considered. The batch experiments were carried out in 2.5 l glass reactors with a various source of inoculumviz., Cow Dung (CD), Elephant Dung (ED) and Bio-Digested Slurry (BDS) with varied inoculum to substrate (LFs) ratios for a retention time of 50 days with replications. The results obtained from the experiments showed that BDS:LF (25:75) had the highest gas production of 14505 ml (651.85 ml CH₄g^?1 VS) followed by CD:LF (50:50) produced 12072.5 ml (789.36 ml CH₄g^?1 VS) and ED:LF (75:25) produced 11252.5 ml (1492.08 ml CH₄g^?1 VS)with a methane content of 63.77, 61.92 and 62.72%, respectively.     

A Surface-Oxide-Rich Activation Layer (SOAL) on Ni2Mo3N for a Rapid and Durable Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is key to renewable energy technologies such as water electrolysis and metal–air batteries. However, the multiple steps associated with proton-coupled electron transfer result in sluggish OER kinetics and catalysts are required. Here we demonstrate that a novel nitride, Ni₂Mo₃N, is a highly active OER catalyst that outperforms the benchmark material RuO₂. Ni₂Mo₃N exhibits a current density of 10 mA cm⁻² at a nominal overpotential of 270 mV in 0.1 m KOH with outstanding catalytic cyclability and durability. Structural characterization and computational studies reveal that the excellent activity stems from the formation of a surface-oxide-rich activation layer (SOAL). Secondary Mo atoms on the surface act as electron pumps that stabilize oxygen-containing species and facilitate the continuity of the reactions. This discovery will stimulate the further development of ternary nitrides with oxide surface layers as efficient OER catalysts for electrochemical energy devices.     

Covalent Organic Frameworks for Energy Conversion in Photocatalysis

Intensifying energy crises and severe environmental issues have led to the discovery of renewable energy sources, sustainable energy conversion, and storage technologies. Photocatalysis is a green technology that converts eco-friendly solar energy into high-energy chemicals. Covalent organic frameworks (COFs) are porous materials constructed by covalent bonds that show promising potential for converting solar energy into chemicals owing to their pre-designable structures, high crystallinity, and porosity. Herein, we highlight recent progress in the synthesis of COF-based photocatalysts and their applications in water splitting, CO₂ reduction, and H₂O₂ production. The challenges and future opportunities for the rational design of COFs for advanced photocatalysts are discussed. This Review is expected to promote further development of COFs toward photocatalysis.     

气相中CrO2+活化甲烷C—H键的理论研究

用密度泛函UB3LYP/6-311＋＋G**方法计算研究了气相中CrO₂⁺ (²A₁/⁴A")活化甲烷C—H键的微观机理, 找到了四条反应通道. 对其中涉及的两态反应(TSR)进行了分析, 并对影响反应机理和反应速率的势能面交叉现象(potential energy surfaces crossing)进行了详细讨论, 进而运用Hammond假设和Yoshizawa等的内禀坐标单点垂直激发计算的方法找出了一系列势能面交叉点[crossing points (CPs)], 并作了相应的讨论. 进一步用碎片分子轨道理论[fragment molecular orbital (FMO)]对TS1中的轨道相互作用进行了分析, 解释了CrO₂⁺活化甲烷C—H键的机理.     

A Surface‐Oxide‐Rich Activation Layer (SOAL) on Ni2Mo3N for a Rapid and Durable Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is key to renewable energy technologies such as water electrolysis and metal–air batteries. However, the multiple steps associated with proton‐coupled electron transfer result in sluggish OER kinetics and catalysts are required. Here we demonstrate that a novel nitride, Ni₂Mo₃N, is a highly active OER catalyst that outperforms the benchmark material RuO₂. Ni₂Mo₃N exhibits a current density of 10 mA cm^?2 at a nominal overpotential of 270 mV in 0.1 m KOH with outstanding catalytic cyclability and durability. Structural characterization and computational studies reveal that the excellent activity stems from the formation of a surface‐oxide‐rich activation layer (SOAL). Secondary Mo atoms on the surface act as electron pumps that stabilize oxygen‐containing species and facilitate the continuity of the reactions. This discovery will stimulate the further development of ternary nitrides with oxide surface layers as efficient OER catalysts for electrochemical energy devices.     

2D Metal–Organic Framework Derived CuCo Alloy Nanoparticles Encapsulated by Nitrogen-Doped Carbonaceous Nanoleaves for Efficient Bifunctional Oxygen Electrocatalyst and Zinc–Air Batteries

The development of efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) still remains a challenge in a wide range of renewable energy technologies. Herein, CuCo alloy nanoparticles encapsulated by nitrogen-doped carbonaceous nanoleaves (CuCo-NC) have been synthesized from a Cu(OH)₂/2D leaf-like zeolitic imidazolate framework (ZIF-L)-pyrolysis approach. Leaf-like Cu(OH)₂ is first prepared by the ultrasound-induced self-assembly of Cu(OH)₂ nanowires. The efficient encapsulation of Cu(OH)₂ in ZIF-L is obtained owing to the morphology fitting between the leaf-like Cu(OH)₂ and ZIF-L. CuCo-NC catalysts present superior electrocatalytic activity and stability toward ORR and OER over the commercial Pt/C and IrO₂, respectively, which are further used as bifunctional oxygen electrocatalysts in Zn–air batteries and exhibit impressive performance, with a high peak power density of 303.7 mW cm⁻², large specific capacity of up to 751.4 mAh g⁻¹ at 20 mA cm⁻², and a superior recharge stability.     

Binding of ansa- and non-ansa-titanocene anticancer drugs to DNA: a DFT study

The complexes [Ti(η⁵-C₂H₄{CMe₂CH₂CH₂CH=CH₂})₂Cl₂] (1) and [Ti{Me₂Si(η⁵-C₅Me₄)(η5-C₅H₃{CMe₂CH₂CH₂CH=CH₂})}Cl₂] (2) exhibited significant antitumor activity, but the detailed mechanism of antitumor effect remains unknown. In current research, we studied the hydrated 1 and 2 bindings to potential biological targets, purine bases, and phosphate group, using density functional theory and IEF-PCM solvation models. Our calculations reveal that the monoaquated complex binding to guanine shows the lowest activation free-energy with 15.3 and 21.5 kcal/mol for the complexes 1 and 2, respectively. In the diaquaed 1, the lowest activation-free energy is 16.7 kcal/mol for the guanine and closely followed by the phosphate group is 18.3 kcal/mol, while the lowest activation-free energy is 16.9 kcal/mol for the complex 2 binding to the phosphate group. In addition, natural orbital population analysis (NPA) method was performed for the investigation of major electronic characteristics.     

Anomeric effect in phosphate moieties of carbohydrates: An Ab initio study

Ab initio SCF MO calculations at the STO -3G level have been carried out on CH₂OHOPO₃^?H and CH₂OHOPO₃^2?, which have been considered as model systems for the Cl-phosphate moiety of sugars. The results predict higher anomeric energy for the phosphate moiety at Cl atom of pyranosides. Also a trans arrangement of the exocyclic O—P bond is preferred rather than a gauche arrangement, thus exhibiting a reverse exo-anomeric effect. A complete potential energy map has been constructed for CH₃OPO₃^?H, a model system for C6-phosphate moiety. It is seen that the bond angle optimization brings down the relative energies of various conformations. The effect of the phosphate group on the preferred conformation of phosphate containing polysaccharides is also discussed.     

Energy potential and thermogravimetric study of pyrolysis kinetics of biomass wastes

The use of agricultural wastes for energy conversion has been widely studied as renewable and carbon neutral energy sources. This paper aims to evaluate the energetic potential of six agricultural wastes—sugarcane bagasse, bean pods, corn stover, pineapple crown leaves, white cotton and natural coloured cotton stalks, through their characterization and pyrolysis kinetic study. The energetic potential of biomasses was evaluated by ultimate and proximate analysis, higher heating value (HHV), apparent density, and kinetic parameters of conversion and apparent activation energy (E_a) determined by Model-Free kinetics though thermogravimetric analysis data. The results indicate energetic density for dry basis biomasses, such as moisture content less than 7%, volatiles higher than 77% and moderate ash content. The HHVs were higher for the biomass with low O:C ratio. The E_a values increased with increasing O:C ratio and were also influenced by the biomass ash content. Among the studied biomasses, PCL are less explored for energy application, although the results confirm its potential for application in thermochemical processes such as pyrolysis or combustion.