各向异性叠层矩形板大挠度弯曲问题

本文以板的中心挠度为摄动参数,采用摄动方法获得承受均布载荷,四边固定的对称角交叠层板的大挠度弯曲问题的近似解.与文献[12]不同,本文在每一级近似中,应用伽辽金方法求出各级近似解.文中计算了碳纤维复合材料对称角交叠层板的数值结果,绘出了载荷与中心挠度关系曲线以及列出有代表性的几点的应力计算公式.另外,本文研究了玻璃纤维复合材料正交对称叠层方板的大挠度特性,与文献[6]采用有限差分法所得的结果比较表明,采用本文的方法所得结果与试验值吻合得较好.     

粘弹性大挠度圆板的轴对称弯曲

本文探讨粘弹性大挠度圆板的轴对称弯曲的基本方程和求解方法.用半逆解和摄动法分析挠度与膜力,对标准线性固体进行数例计算,并与小挠度理论相比较.全部方程与解答可退化得相应的弹性大挠度板的结果.     

四边固定矩形板大挠度问题的摄动最小二乘解

本文将摄动法与加权残值法相结合,提出了求解大挠度问题的摄动加权法,编制了PWS计算程序,计算了四边固定矩形板在均布载荷下的大挠度问题。算例的结果与实验一致。     

复合结构剪切板的屈曲与后屈曲研究

基于Ｒｅｉｓｓｎｅｒ剪切板理论，本文将现有理论模型推进了一步，导出了控制复合材料和构造矩形板平衡的广义Ｋａｒｍａｎ大挠度方程。此外，运用摄动技术，构造了一个单向压缩简支剪切矩形板的后屈曲渐近解，适用于面板和夹心材料都具正交各向异性的夹层板以及计及横向剪切变形对称铺设的层合板。文中给出了典型算例，并将当前结果与其它理论或数值解作了比较，显示出相当好的一致性。     

正交各向异性圆薄板非线性弯曲

本文取板中点挠度为摄动参数,采用Von—Kármán型大挠度方程组,分析了均布载荷作用下边缘可移夹支正交各向异性圆薄扳的非线性弯曲问题。本文特例与各向同性圆薄板结果很吻合。文中还讨论了有关参数对板挠度和内力的影响,所得结果可供工程应用参考。     

非完善板屈曲路径的有限元增量摄动法

本文以Thompson一般稳定性理论为基础,提出非完善结构(有初始几何缺陷)屈曲平衡路径分析的有限元增量摄动法,它克服了增量迭代法及摄动法各自的缺点,利用增量摄动法,还建立了非完善板屈曲平衡路径的数学分析模型,对非完善矩形板在各种边界条件下的屈曲路径实现了数值程序分析,得到了符合实验的结果。     

弹性非线性屈曲中的逐级摄动解法

摄动法曾用于解决圆板大挠度、扁球块壳等问题的分析计算.众所周知,当非线性程度加大后,原有的摄动法常导致结果的发散或摆动,因为摄动法是属于半收敛性的.为此,     

弹性非线性屈曲中的逐级摄动解法

摄动法曾用于解决圆板大挠度、扁球块壳等问题的分析计算.众所周知,当非线性程度加大后,原有的摄动法常导致结果的发散或摆动,因为摄动法是属于半收敛性的.为此, ...     

投影云纹法在研究加劲板后屈曲平衡路径及后屈曲模态转化过程的应用

本文应用投影云纹法研究受压加劲板的大挠度非线性问题。用投影云纹法测量加劲板后屈曲平衡路径,记录了随着载荷的增加,加劲板后屈曲模态变化的全过程。将云纹图输入微型计算机处理,获得了加劲板的全场位移和全场应力的分布情况。用投影云纹法所测得的结果同理论计算值基本吻合。     

考虑剪切变形的各向同性,正交各向异性矩形板的屈曲和后屈曲

本文讨论考虑横向剪切变形的各向同性、正交各向异性矩形板的屈曲和后屈曲性态。应用Reissner理论,采用文[1]提供的摄动方法,给出了完善和非完善各向同性、正交各向异性矩形板的后屈曲平衡路径,并与薄板理论结果作了比较。     

Perturbation analyses for the postbuckling of simply supported rectangular plates under uniaxial compression

In this paper, applving perturbation method to von Kármán nonlinear large deflection equations of plates by taking deflection as perturbation parameter, the posibuckling behavior of simply supported rectangular plates under uniaxial compresion is investigated. Two types of in-plane boundary conditions are now considered and the effects of initial imperfections are also studied. It is found that the theoretical results are in good agreement with experiments. The method suggested in this paper which has not been found in previous papers is rather simple and easy for the postbuckling analysis of rectangular plates.     

Buckling and postbuckling behavior of antisymmetrically angle-ply laminated composite plates

The buckling and postbuckling behaviors of perfect and imperfect antisymmetricallyangle-ply laminated composite plates under uniaxial compression have been studied byperturbation technique which takes deflection as its perturbation parameter.In this paper,the effects of in-plane boundary conditions,angles,total number oflayers and initial geometric imperfection on the postbuckling behavior of laminated plateshave been discussed.     

Postbuckling of rectangular plates under uniaxial compression combined with lateral pressure

Based on the nonlinear large deflection equations of von Kármán plates, the lateral pressure is first converted into an initial deflection by Galerkin method, the postbuckling behavior of simply supported rectangular plates under uniaxial compression combined with lateral pressure is then studied applying perturbation method by taking deflection as perturbation parameter. Two types of in-plane boundary conditions and the effects of initial geometric imperfection are also considered. It is found that the theoretical results are in good accordance with experiments.     

Perturbation analysis for the postbuckling of rectangular orthotropic plates

In this paper, applying perturbation method to von Kármán-type nonlinear large deflection equations of orthotropic plates by taking deflection as perturbation parameter, thé postbuckling behavior of simply supported rectangular orthotropic plates under inplane compression is investigated. Two types of in-plane boundary conditions are now considered and the effects of initial imperfections are also studied. Numerical results are presented for various cases of orthotropic composite plates having different elastic properties. It is found that the results obtained are in good agreement with those of experiments.     

Elasto-plastic analysis for the buckling and postbuckling of rectangular plates under uniaxial compression

Full-range analysis for the buckling and postbuckling of rectangular plates under in-plane compression has been made by perturbation technique which takes deflection as itsperturbation parameter.In this paper the effects of initial geometric imperfection on the postbuckling behaviorof plates have been discussed.It is seen that the effect of initial imperfection on the inelasticpostbuckling of plates is sensitive.By comparison,it is found that the theoretical results ofthis paper are in good agreement with experiments.     

Non-linear analysis of functionally graded plates under transverse and in-plane loads

Large deflection and postbuckling responses of functionally graded rectangular plates under transverse and in-plane loads are investigated by using a semi-analytical approach. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The plate is assumed to be clamped on two opposite edges and the remaining two edges may be simply supported or clamped or may have elastic rotational edge constraints. The formulations are based on the classical plate theory, accounting for the plate-foundation interaction effects by a two-parameter model (Pasternak-type), from which Winkler elastic foundation can be treated as a limiting case. A perturbation technique in conjunction with one-dimensional differential quadrature approximation and Galerkin procedure are employed in the present analysis. The numerical illustrations concern the large deflection and postbuckling behavior of functional graded plates with two pairs of constituent materials. Effects played by volume fraction, the character of boundary conditions, plate aspect ratio, foundation stiffness, initial compressive stress as well as initial transverse pressure are studied.     

含基体横向损伤的黏弹性板的蠕变后屈曲分析

基于Schapery三维黏弹性损伤本构关系,引入沈为和Kachanov损伤演化方程,建立了基体横向损伤的纤维单一方向铺设黏弹性板的损伤模型;应用von Karman板理论,导出了考虑损伤效应的具初始挠度的纤维单一方向铺设黏弹性矩形板的非线性压屈平衡方程. 对未知变量在空间上采用差分法离散,时间上采用增量算法和Newton-Cotes积分法离散,控制方程被迭代求解. 算例中讨论了损伤以及有关参数对黏弹性复合材料板后屈曲行为的影响,且与已有文献的结果进行了比较. 数值结果表明：随着外载荷或者初始挠度的增大,板后屈曲趋于稳定时的挠度就愈大,损伤的影响愈明显;而随着长宽比的增大,板后屈曲趋于稳定时的挠度愈小,损伤的影响却随之增大.     

Thermomechanical postbuckling of unilaterally constrained shear deformable laminated plates with temperature-dependent properties

This paper presents a study on the postbuckling responses of shear deformable laminated plates resting on a tensionless foundation of the Pasternak-type and subjected to combined axial and thermal loads. Two different postbuckling cases are considered, namely (1) the compressive postbuckling of initially heated plates and (2) the thermal postbuckling of initially compressed plates. The postbuckling analysis of laminated plates is based on the higher order shear deformation plate theory with a von Kármán-type of kinematic non-linearity. It is assumed that the foundation reacts in compression only. The thermal effects are also included and the material properties are assumed to be temperature dependent. The initial geometric imperfection of the plates is taken into account. The analysis uses a two-step perturbation technique to determine the postbuckling response of the plates. An iterative scheme is developed to obtain numerical results without using any assumption on the shape of the contact region. Numerical solutions are presented in tabular and graphical forms to study the postbuckling behavior of antisymmetric angle-ply and symmetric cross-ply laminated plates resting on tensionless elastic foundations of the Pasternak-type, from which results for conventional elastic foundations are obtained as comparators. The results reveal that the unilateral constraint has a significant effect on the postbuckling response of the plates subjected to combined axial and thermal loads when the foundation stiffness is sufficiently large. The results also confirm that the postbuckling responses are significantly influenced by temperature dependency and initial membrane stress as well as initial thermal stress.     

Buckling and postbuckling of moderately thick plates

This paper gives the basic differential equations for finite deflections of elastic plates according to Reissner’s approximate stress distributions. The buckling and postbuckling problems of elastic rectangular plates, including the effect of transverse shear deformation, are solved and discussed, by using perturbation method suggested in ref. [8]. The postbuckling equilibrium paths of perfect and imperfect moderately thick rectangular plates are presented and compared with the results based on thin plate theory.