Blue Osmium(IV) Sulfite Complex: Synthesis and Study

Blue osmium(IV) sulfite complex Na₄[Os₂(-O)₂(SO₃)₄(H₂O)₄] · 4.5 H₂O was synthesized via the reaction of aqueous solutions containing OsO₄ and equimolar amount of Na₂SO₃ and H₂SO₄ at 50°C and its composition and structure were determined by elemental analysis, X-ray electronic and IR spectroscopies, and thermogravimetric analysis. The compound is X-ray amorphous, insoluble in water but soluble in hydrochloric and sulfuric acids. The electrochemical methods (cyclic voltammetry and potential-controlled coulometry) indicate the complex polymerization in solutions. Under continuous electrolysis at high negative potentials (E _r = –0.10 V), the product under study is depolymerized and the monomeric Os(II) complexes are formed. At a high positive potential (E ₀ = 1.00 V), Os(VI) is formed that disproportionates into Os(IV) and Os(VIII).     

Synthesis and Reactions of Platinum(III) Complexes with Protoporphine Ligands in Mixtures of Acetic and Sulfuric Acids

Unusual stable platinum complexes (Cl)PtIIIP were obtained by the reaction of K₂[PtCl₆] with porphyrin H₂P (full methyl ethers of proto-, meso-, deutero-, and hematoporphyrin) in a 1:2 molar ratio in boiling pyridine. The forms of existence, kinetics and mechanism of dissociation of metal porphyrins in AcOH-(0.3-2.1) M H₂SO₄ mixtures were studied at 300-330 K. The reaction has first-order with respect to metal porphyrin, low E values (21-48 kJ/mol), and negative S values (-145- to -224 J mol^{- 1} K^{- 1}). The dependence of the formal first-order rate constants on H₂SO₄ concentration is linear at low values of this latter (up to 1.5 M). The mechanism of the electron density redistribution produced by functional substitution in positions of the macroring was studied to establish that the character of the dependence of the dissocia- tion rate on the macroring nature is determined by restricted -electron density transfer from the metal atom to a coordinated N atom.     

Oxidative cyclisation of chalcones with thallium(III)nitrate: Synthesis of (Z)-2-phenylmethylene-7-nitro-3(2H)-benzofuranones

Oxidation of 2-hydroxy-3-nitrochalcones with thallium(III) nitrate gives (Z)-2-phenylmethylene-7-nitrobenzofuran-3(2H)-one derivatives, rather than the more usual 1,2-diaryl-3,3-dimethoxypropan-1-ones or the corresponding isoflavones.

---

Oxydative Cyclisierung von Chalconen mit Thallium(III)nitrat: Synthese von (Z)-2-Phenylmethylen-7-nitro-3(2H)-benzofuranonen (Kurze Mitteilung)

Zusammenfassung Die Oxidation von 2-Hydroxy-3-nitrochalconen mit Thallium(III)nitrat ergab (Z)-2-Phenylmethylen-7-nitro-3(2H)-benzofuranon-Derivate und nicht die üblichen 1,2-Diaryl-3,3-dimethoxypropan-1-one bzw. die entsprechenden Isoflavone.

     

Synthesis, structural characterisation and thermal decomposition studies of some 2,4′-bipyridyl complexes with cobalt(II), nickel(II) and copper(II)

2,4-Bipyridyl (2,4-bipy orL) complexes with cobalt(II), nickel(II) and copper(II) of the formulae M(2,4-bipy)₂(CH₃COO)₂·2H₂O (M(II) = Co, Ni, Cu), Co(2,4-bipy)₂SO₄·3H₂O or Ni(2,4-bipy)₂SO₄·4H₂O have been prepared and their IR and electronic (VIS) spectra are discussed. The thermal behaviour of the obtained compounds has also been studied. The intermediate products of decomposition at different temperatures have been characterized by chemical analysis and X-ray diffraction.We thank dr. A. Malinowska for performing VIS spectra. This work was supported by the KBN project No. PB 0636/P3/93/04.     

Products of Hydrothermal Treatment of Selenite in Potassium Chloride Solutions

Selenite was boiled in KCl solutions of different concentrations at the respective boiling temperatures and atmospheric pressure. The products were subjected to X-ray diffraction analysis, qualitative infrared analysis, differential thermal analysis and microscopic examination. The product obtained in 1.0 M KCl solution was the -form of calcium sulphate hemihydrate (-CaSO₄·0.5H₂O). In more concentrated KCl solution (1.5, 2.0, 2.5, 3.0, 3.5 or 4.0 M), the -form of calcium sulphate hemihydrate (-CaSO₄·0.5H₂O) was formed, and a reaction took place between KCl and CaSO₄, which gave a double salt: potassium pentacalcium sulphate monohydrate (K2SO₄·5CaSO₄·H₂O).This revised version was published online in November 2005 with corrections to the Cover Date.     

Kinetics and mechanism of dissociation of some tri- and tetra-dentate complexes of copper(II) in acid media

Summary Kinetics of the dissociation ofm-phenylene-dibiguanidecopper(II) ion,N-salicylideneglycyl-glycinatocuprate(II) ion andN-salicylideneglycinato-aquocopper(II) in acid media, forming aquo-copper(II) ion, have been studied by the stopped-flow spectrophotometric technique. Dissociation of the complexes occurs in two consecutive steps, the first being faster than the second. For them-phenylenedibiguanide complex each step exhibits second order acid dependance,k _x=k _x [H⁺]² wherek _x is the observed pseudo-first order rate constant. However, the Schiff base complexes show first order acid dependance,k _x=k _x [H⁺], for both steps. The results, with relatively low H and highly negative S values, are consistent with a solvent-assisted dissociative process.     

Novel tetrahedral and heteronuclear transition metal clusters prepared via single and double isolobal displacements

Ten transition metal cluster complexes with parent and substituted cyclopentadienyl ligands, [(⁵-C₅H⁴ CH₂CH₂)₂O][MFeCoS(CO)₈]₂ (2 M=Mo; 3 M=W), (⁵-C₅H₅)(⁵-RC₅H₄)MFeNiS(CO)₅ (5 M=Mo, R=Me; 6M= W, R=H), (⁵-C₅H₅)[⁵-C₅H₄C(O)CH₂]₂[WFeNiS(CO)₅][WFeCoS(CO)₈] (8), (⁵-C₅H₅)₂[⁵-C₅H₄ C(O)CH₂]₂[WFeNiS(CO)₅]₂ (9), (⁵-RC₅H₄)[(⁵-C₅H₄CH₂CH₂)₂O][Mo2FeS(CO)₇][MoFeCoS (CO)₈] (10R=MeCO; 12 R=MeO2C), (⁵-RC₅H₄)₂[(⁵-C₅H₄CH₂CH₂)₂O][Mo₂FeS(CO)₇]₂ (11 R=MeCO; 13 R=MeO2C), were synthesized through single and double isolobal displacements and characterized by elemental analyses, i.r., 1H-n.m.r. and MS techniques.     

Preparation and x-ray structure analysis of [Rh2Cl2(μ-CO)(μ-vdpp)2] [vdpp=H2C=C(PPh2)2]

Summary The complex [Rh₂Cl₂(-CO)(-vdpp)₂] (1) (vdpp=H₂C=C(PPh₂)₂) was prepared by reaction of [Rh₂(CO)₄-(-Cl)₂] with vdpp. When (1) is allowed to stand overnight under an atmosphere of CO without stirringtrans-[Rh₂Cl₂(CO)₂(-vdpp)₂] is formed as a red precipitate in low yields. On rapid addition of CO the tricarbonyl complex [Rh₂(CO)₂(-CO)(-Cl)(-vdpp)₂]-Cl is formed instead. The chemical behaviour of the vdpp-substituted complex (1) is very similar to that of the corresponding dppm-substituted complex [Rh₂(Cl₂-(-CO)(-dppm)₂] (dppm=H₂C(PPh₂)₂). this similarity also extends to the molecular structures of both compounds. Unit cell parameters of (1): space group Pben (Z=8),a=2344.7(5),b=1506.9(7),c=3021.6(9)pm. Rh-Rh 267.4(1) pm.     

Optical and Chromaticity Characteristics of Cobalt and Palladium 4-(2-Pyridylazo)resorcinates

Optical and chromaticity characteristics (diffuse reflectances, chromaticity coordinates, lightness, color saturation, yellowness, color tint, and whiteness) of cobalt and palladium complexes of 4-(2-pyridylazo)resorcinol were determined at pH 7.2–7.9 and in 1 M H₂SO₄. The conditions of the separate determination of cobalt and palladium in the presence of each other by changing the order of the addition of reagent and using bifunctional chromaticity measurements and two-wavelength spectrophotometry are specified. The advantages of the chromaticity measurements are demonstrated. The proposed procedures were used for the analysis of model mixtures, binary cobalt–palladium alloys, and cobalt and palladium catalysts.     

Intramolecular Alkyne Coupling in the Reaction of 1,8-bis(phenylethynyl)naphthalene with Pt2Ru4(CO)18

The reaction of Pt₂Ru₄(CO)₁₈, 1 with 1,8-bis(phenylethynyl)naphthalene, 2 has yielded two metal carbonyl cluster complexes: Ru₂(CO)₆[- ²-C₁₀H₆C₄Ph₂], 3 (60% yield) and Ru₂Pt(CO)₆[- ²-C₁₀H₆C₄Ph₂]₂, 4 (8% yield). Both compounds were characterized by a single crystal X-ray diffraction analysis. Both products were formed as a result of fragmentation of the Pt₂Ru₄ cluster of 1. Compound 3 contains two ruthenium atoms. They are bridged by a tricyclic C₁₀H₆C₄Ph₂ ligand formed by the coupling of the two -carbon atoms of the alkyne groups. The -carbon atoms of the alkynes are -bonded to one of the ruthenium atoms to form a metallacycle and this entire group is -bonded to the second ruthenium atom. Compound 4 contains two ruthenium atoms with a platinum atom between them. This molecule contains two tricyclic C₁₀H₆C₄Ph₂ ligands similar to that in 3, and two metallacycles formed by coordination of the -carbon atoms of both ligands to the platinum atom. One ligand is -bonded to each of the ruthenium atoms.     

Beeinflussung der Umsetzung von Phosphor(V)-chlorid mit Isopropenylacetat durch polare Lösungsmittel

Zusammenfassung Bei der Umsetzung von PCl₅ mit Isopropenylacetat verlaufen zwei konkurrierende Reaktionen, deren Wechselbeziehung weitgehend vom Charakter des Lösungsmittels abhängt.In PCl₃- und CCl₄-Lösung^1–4 entsteht beim Erhitzen zunächst ein komplexes Anlagerungsprodukt,1 (R=R=CH₃), das durch Wanderung der Acetylgruppe in die -Stellung eine Umlagerung erfährt. Als Endprodukt (nach Behandlung des Reaktionsgemisches mit SO₂) bildet sich das Säurechlorid der -Acetyl--chlorpropenylphosphonsäure4 (3a:R=R=CH₃). Die Nebenreaktion ergibt nur unbedeutende Mengen von phosphorhaltigen niedrigsiedenden Verbindungen. In Phosphoroxychlorid- oder Thionylchloridlösung wird die Nebenreaktion, namentlich bei niederer Temperatur, zur Hauptreaktion. Das Gemisch enthält CH₃CCl₂CH₂POCl₂, CH₃CCl=CHPOCl₂ und CH₃COCH₂POCl₂, die als entsprechende Äthylester nachgewiesen wurden. In POCl₃ und SOCl₂ beim Erhitzen sowie in PCl₃ und CCl₄ bei niedriger Temp. treten beide konkurrierende Reaktionen nur mäßig in Erscheinung.

---

Two competing reactions occur between PCl₅ and isopropenyl acetate; their ratio depends largely on the solvent. In PCl₃ and CCl₄ on heating a complex adduct1 (R=R=CH₃) ist first formed which undergoes rearrangement by migration of the acetyl group into the -position. The final product, after treatment of the reaction mixture with SO₂, is -acetyl--chloropropenyl phosphonic acid chloride (3a). The side reaction yields only insignificant amounts of phosphorus-containing low boiling compounds. In POCl₃ or SOCl₂ the side reaction becomes the main reaction especially at low temperatures. The mixture contains CH₃CCl₂CH₂POCl₂, CH₃CCl=CHPOCl₂ and CH₃COCH₂ POCl₂, identified as their ethyl esters. In POCl₃ and SOCl₂ on heating, and in PCl₃ and CCl₄ at low temperatures, the two competitive reactions take place only to a moderate extent.

     

Trapping adsorption of carbon monoxide located between carbon dioxide adsorbed on magnesium oxide

Carbon monoxide adsorbed on MgO is strongly trapped by the adsorbed carbon dioxide, increasing the heat of adsorption from 85.4 to 184.1 kJ/mol. The trapped CO is thought to be captured by two or three adsorbed CO₂ and becomes less active to react with oxygen.

---

, MgO, , 85,4 184,1 /. , CO CO₂ .

     

The thermal decomposition reactions of bis-(pyridine-2-aldoxime)-copper(II) complexes

The thermal properties of some complexes of copper(II) with pyridine-2-aldoxime (HPAO), where the ligand appears either as the ion (PAO^–) or as a neutral molecule, were determined in vacuo and in dynamic nitrogen and oxygen gas atmospheres. The study was carried out by thermoanalytical (TG, DTG. DTA), spectroscopic and spectrometric (UV-visible, IR, diffuse reflectance, mass) techniques.The initial decomposition temperature is influenced by the number of acid hydrogens in the complex; the thermal stability sequence in vacuo is: [Cu(PAO)₂H]Cl > [Cu(PAO)₂H₂]Cl₂ > [Cu(PAO)₂]The thermal decomposition reactions occur in several separate steps, the first of which gives rise to partial ligand decomposition, the reduction of copper(II) to copper(I), and the conversion of the residual pyridine-2-aldoxime into acid amide.

---

Zusammenfassung Die thermischen Eigenschaften einiger Komplexe von Kupfer(II) mit Pyridin-2-aldoxim (HPAO), in denen der Ligand entweder als Ion (PAO^–) oder als neutrales Molekül vorliegt, wurden im Vakuum und in dynamischer N₂- und O₂-Atmosphäre ermittelt. Zur Untersuchung wurden thermoanalytische (TG, DTG, DTA) und spektrometrische (UV-sichtbar, IR, diffuse Reflektionsspektrophotometrie, Massenspektrometrie) Techniken herangezogen. Die Temperatur, bei der die Zersetzung beginnt, wird durch die Zahl der sauren Wasserstoffatome im Komplex beeinflußt; für die thermische Stabilität im Vakuum gilt die Reihenfolge [Cu(PAO)₂H]Cl > [Cu(PAO)₂H₂]Cl₂ > [Cu(PAO)₂]. Die thermischen Zersetzurigsreaktionen verlaufen in mehreren diskreten Schritten, wobei der erste von diesen eine partielle Zersetzung des Liganden, die Reduktion von Kupfer(II) zu Kupfer(I) und die Konversion des verbleibenden Pyridin-2-aldoxims in das Säureamid in sich einschließt.

---

-2- ( ), (-), . (, , ) , - , , - . , [Cu(PAO)₂H]CI > [Cu(PAO)₂H₂]Cl₂ > [Cu(PAO)₂] , , -2- .

     

Substitution of ligands in dichloro-2-(arylazo)heterocyclepalladium(II) by 8-quinolinol: kinetics and mechanistic studies

Nucleophilic substitutions of Pd(N,N)Cl₂[(N,N = 1-methyl-2-(arylazo)imidazole (RaaiMe), p-RC₆H₄N=NC₃H₂NN-1-Me; 2-(arylazo)pyridine (Raap), p-RC₆H₄N=NC₅H₄N; 2-(arylazo)pyrimidine (Raapm), p-RC₆H₄N=NC₄H₃N₂ where R = H (a), Me (b), Cl (c)] with 8-quinolinol (HQ) have been examined by spectrophotometry at 298 K in MeCN solution. The product, Pd(Q)₂, has also been confirmed by independent synthesis from Na₂[PdCl₄] and HQ in EtOH. The kinetics of the reaction have been studied under pseudo-first-order conditions and the analyses support a nucleophilic association path. A single phase reaction has been observed and follows the rate law, rate = a + k [Pd(N,N)Cl₂] [HQ]². Thus, the reaction is first order in [Pd(N,N)Cl₂] and second order in [HQ]. External addition of Cl^–(LiCl) suppresses the rate. The rate increases as follows: Pd(RaaiMe)Cl₂ < Pd(Raap)Cl₂ < Pd(Raapm)Cl₂.     

Über Perhydro-2,5,8-trimethyl-1-oxa-4,7,9 b-triazaphenalen,ein neues heterocyclisches System aus Crotonaldehyd und Ammoniak

Zusammenfassung Die Konstitutions- und Konfigurationsbestimmung der Tricrotonyliden-tetramine wird durch das NMR-Spektrum eines seit 1946 bekannten gemeinsamen Dehydrierungsproduktes ergänzt.Durch Massenspektren, NMR-Spektrum und andere Untersuchungen wird eine neue heterocyclische Base, die bei der Umsetzung von Crotonaldehyd mit Ammoniak entsteht, als3 b erkannt und ihre Identität mit einer vonCombes (1883) erhaltenen Verbindung C₈H₁₆ON₂ zur Diskussion gestellt.

---

Perhydro-2.5.8-trimethyl-1-oxa-4.7.9 b-triazaphenalene, a new heterocyclic systeme prepared from crotonic aldehyde and ammonia

The determination of the constitution and configuration of the tricrotonyliden-tetramines is supplemented by the NMR-spectrum of a dehydration product, known since 1946.By mass spectra, NMR, and other investigations a new heterocyclic base, formed at the reaction of crotonic aldehyde with ammonia, is identified as3 b and its identity with a compound C₈H₁₆ON₂ obtained byCombes in 1883 is discussed.

     

Solvent and Temperature Dependence of 59Co NMR Chemical Shifts of Tris(acetylacetonato)cobaIt(III) and Tris(dipivaloylmethanato)cobalt(III)

Cobalt-59 NMR chemical shifts of Co(acac)₃, and Co(dpm)₃ (acac^– = acetylacetonate ion and dpm^– = dipivaloylmethanate ion) in 14 organic solvents, C₆H₁₄, C₆H₆, CH₂Cl₂, CHCl₃, CCl₄, CH₃CN, CH₃OH, C₂H₅OH, CH₃CH(OH)CH₃, (C₂H₅)₂O, (CH₃)₂CO, (CH₃)₂SO, (CH₃)₂NCHO and C₆H₅NO₂, were measured at five temperatures ranging from 289 to 329 K. The observed chemical shift (_obs) was linearly correlated to the maximum absorption wavelength in the visible spectra (_max) corresponding to the d-d electronic transition energy between the ground ¹A_1g and excited ¹T_1g states. The _obs-_max relation was explained by the ligand field theory. The temperature coefficients of _obs, of each complex showed a negative correlation with _obs. The _obs, of Co(acac)₃ decreased with the increasing electrophilic ability of the solvent (Mayer's acceptor number), whereas no tendency was observed in the case of Co(dpm)₃.     

2,2′-Diphenyl-Δ3,3′-bi-3H-indole-1,1′-dioxide: Molecular interactions and crystal structure

The Dinitrone 2,2-diphenyl-^3,3-bi-3H-indole-1,1-dioxide acts as a demethylating and dehydrogenating agent. The mechanism of interaction of the dinitrone with donors and acceptors does not involve intermediate charge-transfer complexes probably due to a self association between dinitrone molecules (as supported by X-ray determinations). The crystal structure of the dinitrone was obtained by direct methods;a=9.967 (2),b=19.817 (3),c=10.875 (2) Å, =111.2 (2)°, space group P2₁/n. The finalR andR _w were 0.089 and 0.063 for all measured reflexes.

---

2,2-Diphenyl-^3,3-bi-3H-indol-1,1-dioxid: Molekulare Wechselwirkungen und Kristallstruktur

Zusammenfassung Das Dinitron 2,2-Diphenyl-^3,3-bi-3H-indol-1,1-dioxid wirkt als Demethylierungs- und Oxydationsmittel. Die Wechselwirkung des Dinitrons mit Elektronen-Acceptoren und Elektronen-Donatoren geht wegen der Selbstassoziation zwischen den Dinitron-Molekülen ohne die dazwischenliegende Bildung eines Charge-Transfer-Komplexes vor sich; das wird auch von Röntgenstrukturuntersuchungen gestützt. Die Kristallstruktur wurde mit direkten Methoden ermittelt:a=9.967 (2),b=19.817 (3),c=10.875 (2) Å; =111.2 (2)°. P2₁/n. Die endgültigen WerteR undR _w waren 0.089 und 0.063 für alle gemessenen Reflexe.

     

4(5)-D-Arabinotetrahydroxybutylimidazoline-2-thione (THBIT), a new reagent for the spectrophotometric determination of palladium

Summary 4(5)-D-Arabinotetrahydroxybutylimidazoline-2-thione, THBIT, is proposed as a new reagent for the spectrophotometric determination of Pd(II). Pd(II) forms 11, 12 and 14 complexes with THBIT. The system conforms to Beer's law up to 5g/ml palladium concentration in aqueous medium (molar absorptivity, 1.99×10⁴ l· mole^–1·cm^–1 at 338 nm). The most serious interference is from Hg(II), Os(VIII), Ru(IV), Cr(VI), V(V) and S₂O₃ ^2–. The method has been used successfully for the determination of palladium in catalysts and synthetic samples.     

Sulfataerosole in einem urbanen Gebiet (Wien)

Zusammenfassung An einer stark befahrenen Straße in Wien wurden Messungen der Korngrößenverteilung des Staubes und der Sulfataerosole mittels 9stufiger Kaskadenimpaktoren durchgeführt. An derselben Meßstelle wurden Tagesgänge der Konzentrationen von Staub und wasserlöslichem Sulfat ermittelt. Parallel dazu wurden die Konzentrationen von SO₂ (relativkonduktometrisch) und Ozon (Chemilumineszenzmethode) sowie die Parameter Temperatur und relative Feuchte registriert. Die 36 Tagesgänge mit einer Dauer von je 36 Stunden wurden zu gleichen Teilen im Winter- und Sommerhalbjahr 1978/79 gemessen. In allen Fällen wurde das SO₄ ^2– nach Eluierung mit Wasser photometrisch nach der Thorinmethode bestimmt. Das Maximum der Korngrößenverteilung der Sulfate liegt zwischen 0,5 und 1m, diejenige des Staubes zeigt eine deutliche Trennung in Coarse- und Accumulation-Mode. Innerhalb einer Höhe von 20 m wurde im Mittel keine Vertikalvariation der Korngrößenverteilung der Sulfate gefunden. Die geometrischen Mittelwerte der Staubkonzentration betragen im Sommer (Winter) 208 (265)g/m³, diejenigen der Sulfatkonzentration 8,7 (16,2)g SO₄ ^2–/m³. Die höchsten Sulfatwerte finden sich im Mittel untertags, Spitzenwerte der SO₄ ^2–-Konzentration (bis zu 80g/m³) traten bei nebeligen Wetterlagen auf. Ein eindeutiger Zusammenhang zwischen der Sulfatkonzentration und dem Ozongehalt sowie den meteorologischen Parametern wurde nicht gefunden, die Korrelation zwischen Sulfat- und SO₂-Konzentration ist gesichert positiv. Geschätzte Oxydationsraten liegen zwischen 0,5 und 4,5% SO₂/h.

---

Sulfate aerosols in an urban field (Vienna)

Summary At a site beside a frequented street in the centre of Vienna measurements of the size-distribution of dust and sulfate aerosol were made using 9-stage-cascade-impactors. At the same site diurnal variations of the concentrations of dust (using a high-volume-sampler), water-soluble sulfates, SO₂ (conductumetric) and ozone (chemiluminescence method) and the variations of temperature and relative humidity were registrated. The time resolution was 2 hours. The 36 diurnal variations (each of them with a duration of 36 hours) are distributed over 1978/79. In all cases SO₄ ^2– was determined photometrically using the thorine-method. The size-distribution of dust shows the existence of coarse- and accumulation-mode. The maximum of the size-distribution of SO₄ ^2– is between 0.5 and 1m aerodyn. diam. No vertical variation of SO₄ ^2–-concentration could be observed up to a height of 20 m above ground. Geometric mean values of dust-concentration in summer (winter) are 208 (265)g/m³, of SO₄ ^2–-concentration 8.7 (16.2)g/m³. Highest values of SO₄ ^2–-concentration occured during daytime in the mean. High concentrations (up to 80g SO₄ ^2–/m³) yielded under foggy weather conditions. Correlations are positive between SO₄ ^2– and SO₂ but positive or negative or even missing between sulfate and O₃, relative humidity and temperature. Estimated oxidation rates are 0.5–4.5% SO₂/h.

---

---

Vorgetragen beim 8. Internationalen Mikrochemischen Symposium in Graz, 25.–30. August 1980.     

The outersphere complex of EuCl2+ in a mixed system of methanol and water of 1.0M (H, Na) (Cl, ClO4)

The stability constans, ₁, of each monochloride complex of Eu(III) have been determined in the methanol and water mixed system with 1.0 mol·dm^–3 ionic strength using a solvent extraction technique. The values of ₁ increase with an increase in the mole fraction of methanol (X _S ) in the mixed solvent system when 0X _S 0.40. The, distance of Eu³⁺–Cl^– in the mixed solvent system was calculated using the Born-type equation and the Gibbs' free energy derived from ₁. Calculation of the Eu³⁺–Cl^– distance and the preferential solvation, of Eu³⁺ by water proposed the variation of the outersphere complex of EuCl²⁺ as follows: (1) [Eu(H₂O)₉]³⁺Cl^–, [Eu(H₂O)₈]³⁺Cl^– and [Eu(H₂O)₇(CH₃OH)³⁺Cl^– inX _S0.014, (2) [Eu(H₂O)₈]^3–Cl^– and [Eu(H₂O)₇(CH₃OH)]³⁺Cl^– in 0.014<X _S <0.25 and (3) [Eu(H₂O)₇(CH₃OH)]^3–Cl^– and [Eu(H₂O)₆(CH₃OH)[₂ ³⁺Cl^– in 0.25<X _S 0.40.