一种新型多芯-双模-大模场面积光纤的设计和分析

提出了一种新型双空气孔多芯-双模-大模场面积光纤结构, 计算了其模场分布、基模有效面积及弯曲损耗特性, 分析了各结构参量对其有效折射率及有效面积的影响. 这种结构在增大有效面积的同时使得二阶模的TE₀₁, TM₀₁模截止, 实现双模传输, 基模有效面积约为1044 μm².调整其结构参量, 甚至可以达到单模传输.这种结构制作简单、设计灵活, 可用于高速大容量无源光纤及有源器件中.合理设计各结构参量, 可以使有效面积达到3512 μm²甚至更高, 从而满足光通信领域中大容量、高功率传输等实际应用的需求. 关键词： 多芯光纤 双模 大模场面积 弯曲损耗     

Acousto-optic generation of orbital angular momentum states of light in a tapered optical fiber

We demonstrate an acousto-optic mode converter based on a tapered optical fiber to efficiently generate orbital angular momentum states of light. In our scheme an acoustic wave is deployed to the waist of tapered optical fiber where two degenerate HE₂₁ modes leading to +1 and −1 orbital angular momentum eigen-modes are resonantly excited. The excitation of TM₀₁ and TE₀₁ modes is suppressed by enlarging the intermodal index difference between near-degenerate spatial modes. Numerical calculation for optimization of the taper diameter is provided. The experimental characterization of generated states is performed by analyzing the output far-field pattern and the spatial interference fringes with a uniform reference beam.     

Spontaneous decay rates of the hyperfine structure atomic states into an optical nanofiber

Spontaneous decay rates of atoms into guided modes of an optical nanofiber are found for atomic transitions between the hyperfine structure sublevels. The decay rates are evaluated for the hyperfine structure transitions in Rb atoms. The efficiency of the guided mode excitation by spontaneous decay of the specific hyperfine atomic states is examined for both the fundamental fiber mode HE₁₁ and the higher-order modes TE₀₁, TM₀₁, and HE₂₁.     

X波段过模弯曲圆波导TM01-HE11模式变换器研究

在波束波导和反射面天线的馈源应用中, 为了产生低副瓣且方向图等化的高斯波束, 需要将高功率微波转换为准高斯模HE₁₁模辐射. 本文利用弯曲圆波导可同时从TM₀₁模产生TE₁₁模和TM₁₁模的原理, 提出了采用双弯曲过模圆波导结构直接将TM₀₁转换为HE₁₁的模式变换器, 避免了常规微波领域中首先将TM₀₁转换为TE₁₁再用波纹式或半径渐变式TE₁₁-HE₁₁转换器转换为准高斯波束功率容量不足或尺寸过长的不足. 基于模式耦合理论和Taguchi优化算法对模式变换器的弯曲半径、相移直端长度及引入位置进行了优化, 使输出的TE₁₁和TM₁₁成一定比率, 以组成HE₁₁模式, 并对设计的模式变换器进行了全电磁波仿真分析, 结果表明输出波束的标量高斯含量在9.05–9.8 GHz范围内均高于99%, 理论功率容量可达4.5 GW. 关键词： 高功率微波 模式耦合理论 Taguchi优化算法 模式变换器     

Higher order mode propagation in an optical nanofiber

The propagation of higher modes, such as the LP₁₁ mode, in optical nanofibers using the exponentially tapered optical fiber as a basic model is investigated. In order to preserve the LP₁₁ mode in the downtaper as far as the nanofiber waist, the effect of varying the cladding-core radius ratio on the LP₁₁ adiabatic criterion is modeled. A Laguerre-Gaussian beam is created in free space using a spatial light modulator (SLM) and coupled to a few-mode fiber. This device allows convenient switching between the fundamental and LP₁₁ fiber modes. By selecting a few-mode fiber with a relatively low cladding-core ratio, the propagation of the LP₁₁ mode down to a submicron waist has been maintained. Furthermore, by observing the transmission profile during tapering, it is possible to decisively terminate the pulling process in order to eliminate the two degenerate HE₂₁ modes of the LP₁₁ mode. As a result, a nanofiber can be fabricated through which only the TE₀₁ and TM₀₁ components of the LP₁₁ mode propagate. Such a nanofiber has promising applications in the area of mode interference for controlled particle trapping sites.     

具有变态光子带隙结构的相对论Cherenkov辐射源的研究

提出了一种变态光子带隙结构,研究了由这种结构构成的周期慢波系统的Cherenkov辐射源的特性. 利用高频仿真软件以及三维粒子模拟软件对变态及常态光子带隙慢波系统中类TM₀₁模的色散特性及注-波互作用物理过程进行了模拟研究. 结果表明,在变态光子带隙慢波系统中,类TM₀₁模纵向场分量沿角向分布均匀性得到明显改善,能有效抑制非对称模式,提高输出频谱纯度及注-波互作用效率. 关键词： Cherenkov辐射源 变态光子带隙结构 慢波系统 三维粒子模拟     

Mode theory of three-layer cylindrical waveguides and its application to aurum(Au)/polystyrene(PS)-coated terahertz hollow waveguides

In this paper, we present a generic mode theory for the three-layer cylindrical waveguides consisting of three arbitrary material mediums. Based on derived eigenvalue equations of the TE, TM, and hybrid modes, the mode conditions of metal/dielectric-coated terahertz hollow waveguides are extracted. In addition, we quantitatively describe both the effective refractive indexes and the loss characteristics of the aurum/polystyrene-coated terahertz hollow waveguides operating at the TE₀₁, TM₀₁, and HE₁₁ modes. It is indicated that the loss coefficient of the TE₀₁ mode can be much lower than that of the TM₀₁, and HE₁₁ modes, and, especially, can tend to that of the terahertz wave in air. So the TE₀₁ mode is very significant for the hollow waveguides in term of low loss propagating of the terahertz wave. We expect these results to enable a variety of new long-distance THz applications in sensing, detecting and communicating.     

Prediction of TE-, TM-, and hybridmode transmission losses in gaps of oversized waveguides using a scattering matrix code

The transmission losses of different modes in gaps in oversized waveguides are calculated using a modified scattering matrix formalism. Measurements performed for the modes TE₀₁, TE₁₁, TM₀₁, TM₁₁ and HE₁₁ are in good agreement with the calculated numerical results. Both numerical and measured values are compared with existing analytical formulas.     

Dispersion characteristics of a slow wave structure with a modified photonic band gap

This paper studies the dispersion characteristics of a modified photonic band-gap slow-wave structure with an open boundary by simulation and experiment.A mode launcher with a wheel radiator and a coupling probe is presented to excite a pure TM 01-like mode.The cold test and simulation results show that the TM 01-like mode is effectively excited and no parasitic modes appear.The dispersion characteristics obtained from the cold test are in good agreement with the calculated results.     

X波段高功率微波选模定向耦合器

高功率、长脉冲是高功率微波技术发展的趋势,提高微波器件的功率容量成为一项重要的任务,使用过模器件可以有效提高微波源的功率容量,然而却会带来微波源中同时存在多种模式的问题。为了识别一个X波段长脉冲过模高功率微波源的输出主模TM01模式,设计了一种在线选模定向耦合器,进行了理论分析和模拟优化设计。当频率范围为9.2~9.6 GHz时,模拟结果显示该选模耦合器对TM01模的耦合度为-54 dB,在400 MHz带宽内定向性大于35 dB,对TM02模的抑制度大于15 dB,功率容量可达到3 GW以上。     

Emerging 2D Semiconducting Materials: Tin Diselenide for Ultrafast Photonics

SnSe₂, a novel 2D semiconducting material with good photoelectric properties and tunable bandgaps structure, has been widely studied in high-performance photodetectors and superconductivity applications, etc. Herein, another excellent property, nonlinear optical absorption, is applied to ultrafast photonics. The measured nonlinear optical absorption curve of SnSe₂ with modulation depth of 5.52% is obtained. Q-switching and mode-locking in Er-doped fiber lasers based on SnSe₂ is reported. A Q-switched fiber laser can be obtained with a 0.5-m-long gain fiber and a 50:50 optical coupler. With 0.75-m-long active fiber and a 40:60 optical coupler, mode locking can be obtained. Furthermore, a third-order bound-state soliton pulse with a pulse duration of 882 fs can be achieved. The experimental results show that SnSe₂ is an excellent optical saturable absorber for the applications of ultrafast photonics.     

Study of Disk-Loaded Waveguide Filled with Plasma

Recently disk-loaded waveguide has been widely used in high-power traveling wave tubes (HPTWT). It has been shown in many experiments that the interaction efficiency and output power can be increased greatly by injecting plasma into the vacuum microwave device. Using field analysis, the dispersion characteristics and the interaction impedance of the disk-loaded waveguide filled with plasma are analyzed in a strong longitudinal magnetic field. In conclusion, the frequency of the TM₀₁ mode increases as the density of the plasma increases. It also can be found when the plasma density increases to a large scale, the TM₀₁ mode of the disk-loaded waveguide overlaps the TG mode, these two modes couple each other and form the new hybrid modes.     

Critical pump power and cross-section calculation for Yb<Superscript>3+</Superscript>-doped novel inner-clad structures

Rare-earth doped fiber lasers are now considered suitable sources for the 1.0-, 1.5-, and even 2.0-μm regions in a relatively large number of applications. In particular, Yb³⁺-doped fiber lasers have received strong interest due to its high quantum efficiency, broad tunability, and available high output power. In this work, we present results on a newly developed code for the simulation of the critical power that is required when designing double-clad high-power Yb³⁺-doped fiber lasers, which are based on novel inner-clad structures. From our results, we can also estimate σ_ep, σ_el, σ_ap, and σ_al for the aforementioned free-running laser cavities. Finally, we will formulate our predictions for feasible fiber laser cross sections.     

Continuous-wave and actively Q-switched Nd:LSO crystal lasers

With a fiber coupled laser diode array as the pump source, Nd-doped Lu₂SiO₅ (Nd:LSO) crystal lasers at ⁴F_3/2→⁴I_11/2 and ⁴F_3/2→⁴I_13/2 transitions were demonstrated. The active Q-switched dual-wavelength lasers at about 1.08 μm, as well as continuous-wave (CW) and active Q-switched lasers at 1357 nm are reported for the first time, to the best of our knowledge. Considering the small emission cross-sections and long fluorescence lifetime, this material possesses large energy storage ability and excellent Q-switched properties. The special emission wavelength at 1357 nm will have promising applications to be used in many fields, such as THz generation, pumping of Cr³⁺:LiSAF, repumping of strontium optical clock, laser Doppler velocimeter and distributed fiber sensor.     

等离子体填充盘荷波导高频特性分析

从麦克斯韦方程和流体理论出发，推导了填充磁化等离子体慢波结构的基本方程.在大磁场情况下，对等离子体填充盘荷波导的色散特性和耦合阻抗作了研究，结果表明填充等离子体使色散曲线上移，耦合阻抗提高.等离子体填充产生出模式谱非常丰富的周期性低频等离子体模式(TG模式).当等离子体密度增加到一定程度后，场模TM₀₁模的频率范围和TG₀₁模的频率范围相近，两个模式互相耦合产生出新的混合模G₁,G₂.如果相对论行波管工作在混合模上，将会产生新的工作机理. 关键词： 盘荷波导 等离子体填充 色散特性 相对论行波管     

Compact Two-Color Pr3+-Doped ZBLAN Fiber Lasers

Two-color laser simultaneous oscillation in compact trivalent praseodymium ion (Pr³⁺)-doped ZrF₄-BaF₂-LaF₃-AlF₃-NaF (ZBLAN) fiber lasers is investigated. Fiber pigtails by coating high-reflective visible dielectric films are utilized as fiber mirrors (FMs) to construct compact all-fiber laser cavity. Reflectance/transmittance of FMs is intentionally designed to balance net gains and reduce gain competition of different lasable wavelengths in the constructed fiber lasers. By using two selected FMs with high reflectivity at green-light and low reflectivity at red-light, simultaneous green and red laser emission in all-fiber Pr³⁺-doped ZBLAN fiber laser is obtained. Moreover, simultaneous orange and red laser emission is also achieved with another selected FM of high reflectivity at orange-light and low reflectivity at red-light. Our work will provide an effective and easy method to construct compact special fiber (e.g.,ZBLAN fiber, chalcogenide fiber) lasers.     

A broadband ytterbium-doped tunable fiber laser for <Superscript>3</Superscript>He optical pumping at 1083 nm

Large amounts of hyperpolarized ³He gas with high nuclear polarization rates are required for use in neutron spin filters or nuclear magnetic resonance imaging of human lung. Very high efficiency can be obtained by metastability exchange optical pumping using multimode lasers to excite the ^[ 2 _]3S-^[ 2 _]3P transition at 1083 nm. Broadband ytterbium-doped tunable fiber lasers have been designed for that particular application. Different options for the architecture of the fiber oscillator are presented and compared. Emphasis is given to a linear cavity configuration that includes a high reflectivity fiber mirror and a low reflectivity tunable fiber Bragg grating. Optical measurements are performed to finely characterize the spectral behavior of the lasers. Atomic response is also quantitatively probed to assess the optimal design of the oscillator for optical pumping. Multimode operation matching the 2 GHz Doppler-broadened helium resonance line and tunability over more than 200 GHz are demonstrated. Boosting the output of this fiber laser with a Yb-doped fiber power amplifier, all-fiber devices are built to provide robust, high-power turnkey sources at 1083 nm for improved production of laser polarized ³He. PACS 42.60.-v; 42.55.Wd; 32.80.Bx     

Minimization of losses and calculation of the optical properties of Bragg fiber waveguides with a hollow core

A numerical method for solving the inverse problem of determining the geometry of the multilayer shell of a Bragg waveguide that has the lowest waveguide losses for a given mode has been developed with the use of the genetic algorithm. For the calculated designs of waveguides, the distribution of the coordinates of the boundaries of shell layers has been found to be aperiodic under the condition r ₁ ≤ λ due to the axial symmetry of the problem. Waveguide losses for the TE ₀₁, TM ₀₁, and HE ₁₁ modes satisfy the conditions \(\alpha _{TM_{01} } > \alpha _{HE_{11} } > \alpha _{TE_{01} } \). It follows from the dependence of n _eff obtained for these modes on the core radius and number of shell layers that any change in the structure of the waveguide leads to the violation of the optimal propagation regime for these modes. A Bragg fiber waveguide with a hollow core that is designed for the TE ₀₁ mode and directs light in the single-mode regime is presented. The main fraction of losses in this waveguide is attributed to material absorption.     

Effect of the active medium temperature on the operation of fast-flow CO2 lasers

A new formula is obtained for estimating the output power of fast-flow CO₂ lasers. It is shown that a higher specific output power of these CO₂ lasers in comparison with sealed-off CO₂ lasers is caused mainly by the higher saturation intensity of the former. It is concluded that the temperature of the laser active medium affects almost only the charge stability and that, under stable discharge conditions, the same output power can be obtained at different temperatures of the active medium.     

双微波源共轴辐射馈线结构的设计

设计了一种将两个不同波段微波源输出微波馈向同一个馈源喇叭的双波段馈线结构。该结构不仅对两个微波源输出的TM01模进行了有效的模式转换,而且实现了两个波段的微波共用辐射天线。采用双弯曲圆波导模式转换器实现高频段微波源输出微波的模式转换和轴线的定量平移;采用中间模式为矩形波导TE10模的圆波导TM01模-同轴波导TE11模的模式转换器,实现低频段微波源输出微波的模式转换及与高频段微波源输出微波的共轴输出。数值仿真结果验证了设计思路的正确性。