Long-lived polymer radicals. VI. Polymerization of N-methylmethacrylamide with formation of living propagation radicals

The polymerization of N-methylmethacrylamide (NMMAm) with azobisisobutyronitrile (AIBN) was investigated kinetically in benzene. This polymerization proceeded heterogeously with formation of the very stable poly(NMMAm) radicals. The overall activation energy of this polymerization was calculated to be 23 kcal/mol. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.63-0.68[NMMAm]^1?2.5. Dependence of R_p on the monomer concentration increased with increasing NMMAm concentration. From an ESR study, cyanopropyl radicals escaping the solvent cage were found to be converted to the living propagating radicals of NMMAm in very high yields (ca. 90%). Formation mechanism of the living polymer radicals was discussed on the basis of kinetic, ESR spectroscopic, and electron microscopic results.     

Radical polymerization behavior of ethyl ortho-formylphenyl fumarate involving intramolecular hydrogen abstraction

The radical polymerization behavior of ethyl ortho-formyl-phenyl fumarate (EFPF) using dimethyl 2,2′-azobisisobutyrate (MAIB) as initiator was studied in benzene kinetically and ESR spectroscopically. The polymerization rate (R_p) at 60°C was given by R_p = k[MAIB]^0.76[EFPF]^0.56. The number-average molecular weight of poly(EFPF) was in the range of 1600–2900. EFPF was also easily photopolymerized at room temperature without any photosensitizer probably because of the photosensitivity of the formyl group of monomer. Analysis of ¹H? and ¹³C-NMR spectra of the resulting polymer revealed that the radical polymerization of EFPF proceeds in a complicated manner involving vinyl addition and intramolecular hydrogen-abstraction. The polymerization system was found to involve ESR-observable poly(EFPF) radicals under the actual polymerization conditions. ESR-determined rate constant (2.4–4.0 L/mol s) of propagation at 60°C increased with decreasing monomer concentration, which is mainly responsible for the observed low de-pendency of R_p on the EFPF concentration. Copolymerizations of EFPF with some vinyl monomers were also examined. © 1995 John Wiley & Sons, Inc.     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

Radical heterogeneous polymerization behavior of N‐methyl‐α‐fluoroacrylamide in benzene

The polymerization of N‐methyl‐α‐fluoroacrylamide (NMFAm) initiated with dimethyl 2,2′‐azobisisobutyrate (MAIB) in benzene was studied kinetically and with electron spin resonance. The polymerization proceeded heterogeneously with the highly efficient formation of long‐lived poly(NMFAm) radicals. The overall activation energy of the polymerization was 111 kJ/mol. The polymerization rate (R_p) at 50 °C is given by R_p = k[MAIB]^0.75±0.05 [NMFAm]^0.44±0.05. The concentration of the long‐lived polymer radical increased linearly with time. The formation rate (R_p?) of the long‐lived polymer radical at 50 °C is expressed by R_p? = k[MAIB]^1.0±0.1 [NMFAm]^0±0.1. The overall activation energy of the long‐lived radical formation was 128 kJ/mol, which agreed with the energy of initiation (129 kJ/mol), which was separately estimated. A comparison of R_p? with the initiation rate led to the conclusion that 1‐methoxycarbonyl‐1‐methylethyl radicals (primary radicals from MAIB), escaping from the solvent cage, were quantitatively converted into the long‐lived poly(NMFAm) radicals. Thus, this polymerization involves completely unimolecular termination due to polymer radical occlusion. ¹H NMR‐determined tacticities of resulting poly(NMFAm) were estimated to be rr = 0.34, mr = 0.48, and mm = 0.18. The copolymerization of NMFAm(M₁) and St(M₂) with MAIB at 50 °C in benzene gave monomer reactivity ratios of r₁ = 0.61 and r₂ = 1.79. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2196–2205, 2001     

Radical polymerization of vinyl thiocyanatoacetate: Participation of group‐transfer mechanism

Vinyl thiocyanatoacetate (VTCA) was synthesized, and its radical polymerization behavior was studied in acetone with dimethyl 2,2′‐azobisisobutyrate (MAIB) as an initiator. The initial polymerization rate (R_p) at 60 °C was expressed by R_p = k[MAIB]^0.6±0.1 [VTCA]^1.0±0.1 where k is a rate constant. The overall activation energy of the polymerization was 112 kJ/mol. The number‐average molecular weights of the resulting poly (VTCA)s (1.4–1.6 × 10⁴) were almost independent of the concentrations of the initiator and monomer, indicating chain transfer to the monomer. The chain‐transfer constant to the monomer was estimated to be 9.6 × 10^?3 at 60 °C. According to the ¹H and ¹³C NMR spectra of poly (VTCA), the radical polymerization of VTCA proceeded through normal vinyl addition and intramolecular transfer of the cyano group. The cyano group transfer became progressively more important with decreasing monomer concentration. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 573–582, 2002; DOI 10.1002/pola.10137     

Kinetic and ESR studies on the radical polymerization of α‐n‐(α′‐methylbenzyl) β‐ethyl itaconamates derived from racemic and (s)‐α‐methylbenzylamines

The polymerization of α‐N‐(α′‐methylbenzyl) β‐ethyl itaconamate derived from racemic α‐methylbenzylamine (RS‐MBEI) by initiation with dimethyl 2,2′‐azobisisobutyrate (MAIB) was studied in methanol kinetically and with ESR spectroscopy. The overall activation energy of polymerization was calculated to be 47 kJ/mol, a very low value. The polymerization rate (R_p ) at 60 °C was expressed by R_p = k[MAIB]^0.5±0.05[RS‐MBEI]^2.9±0.1. The rate constants of propagation (k_p ) and termination (k_t ) were determined by ESR. k_p was very low, ranging from 0.3 to 0.8 L/mol s, and increased with the monomer concentration, whereas k_t (4–17 × l0⁴ L/mol s) decreased with the monomer concentration. Such behaviors of k_p and k_t were responsible for the high dependence of R_p on the monomer concentration. R_p depended considerably on the solvent used. S‐MBEI, derived from (S)‐α‐methylbenzylamine, showed somewhat lower homopolymerizability than RS‐MBEI. The k_p value of RS‐MBEI at 60 °C in benzene was 1.5 times that of S‐MBEI. This was explicable in terms of the different molecular associations of RS‐MBEI and S‐MBEI, as analyzed by ¹H NMR. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4137–4146, 2000     

Elementary reaction analysis of the radical polymerization of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups

The polymerizations of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups (RS‐EMBI and S‐EMBI) with dimethyl 2,2′‐azobisisobutyrate (MAIB) were studied in methanol (MeOH) and in benzene kinetically and with electron spin resonance (ESR) spectroscopy. The initial polymerization rate (R_p) at 60 °C was given by R_p = k[MAIB]^{0.58 ± 0.05}[RS‐EMBI]^{2.4 ± 0.l} and R_p = k[MAIB]^{0.61 ± 0.05}[S‐EMBI]^{2.3 ± 0.l} in MeOH and R_p = k[MAIB]^{0.54 ± 0.05}[RS‐EMBI]^{1.7 ± 0.l} in benzene. The rate constants of initiation (k_df), propagation (k_p), and termination (k_t) as elementary reactions were estimated by ESR, where k_d is the rate constant of MAIB decomposition and f is the initiator efficiency. The k_p values of RS‐EMBI (0.50–1.27 L/mol s) and S‐EMBI (0.42–1.32 L/mol s) in MeOH increased with increasing monomer concentrations, whereas the k_t values (0.20?7.78 × 10⁵ L/mol s for RS‐EMBI and 0.18?6.27 × 10⁵ L/mol s for S‐EMBI) decreased with increasing monomer concentrations. Such relations of R_p with k_p and k_t were responsible for the unusually high dependence of R_p on the monomer concentration. The activation energies of the elementary reactions were also determined from the values of k_df, k_p, and k_t at different temperatures. R_p and k_p of RS‐EMBI and S‐EMBI in benzene were considerably higher than those in MeOH. R_p of RS‐EMBI was somewhat higher than that of S‐EMBI in both MeOH and benzene. Such effects of the kinds of solvents and monomers on R_p were explicable in terms of the different monomer associations, as analyzed by ¹H NMR. The copolymerization of RS‐EMBI with styrene was examined at 60 °C in benzene. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1819–1830, 2003     

Kinetic and ESR studies on radical polymerization of methyl methacrylate in the presence of fullerene

The effect of fullerene (C₆₀) on the radical polymerization of methyl methacrylate (MMA) in benzene was studied kinetically and by means of ESR, where dimethyl 2,2′-azobis(isobutyrate) (MAIB) was used as initiator. The polymerization rate (R_p) and the molecular weight of resulting poly(MMA) decreased with increasing C₆₀ concentration ((0–2.11) × 10⁻⁴ mol/L). The molecular weight of polymer tended to increase with time at higher C₆₀ concentrations. R_p at 50°C in the presence of C₆₀ (7.0 × 10⁻⁵ mol/L) was expressed by R_p = k[MAIB]^0.5[MMA]^1.25. The overall activation energy of polymerization at 7.0 × 10⁻⁵ mol/L of C₆₀ concentration was calculated to be 23.2 kcal/mol. Persistent fullerene radicals were observed by ESR in the polymerization system. The concentration of fullerene radicals was found to increase linearly with time and then be saturated. The rate of fullerene radical formation increased with MAIB concentration. Thermal polymerization of styrene (St) in the presence of resulting poly(MMA) seemed to yield a starlike copolymer carrying poly(MMA) and poly(St) arms. The results (r₁ = 0.53, r₂ = 0.56) of copolymerization of MMA and St with MAIB at 60°C in the presence of C₆₀ (7.15 × 10⁻⁵ mol/L) were similar to those (r₁ = 0.46, r₂ = 0.52) in the absence of C₆₀. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2905–2912, 1998     

Effects of macromolecular matrix on the process of radical polymerization of ionizable monomers

Radical polymerization of methacrylic acid (MAA) and acrylic acid (AA) in the presence of a positively charged macromolecular matrix was studied. In the presence of a matrix, the rates of polymerization were remarkably increased, especially in high pH region. This suggests that electrostatic interaction between the macromolecular matrix and the growing chains and/or the monomer molecules plays an important role in the process of polymerization reaction. The kinetic orders were greatly influenced by the relative matrix concentration (PC) as follows: for (PC)₀ > [M]₀, R_p = k[M]^0.9 [PC]_0.3 [I]^0.8≤ [M]₀ R_p = k[M]^0.3[PC]⁰[I]^0,8 where [M] and [I] are monomer and initiator concentration, respectively, and k is a constant. The mechanism of the interaction of matrix with monomer and/or growing chains in the process of the propagation is discussed. The complex formed in the matrix polymerization could be easily made into fiber by spinning.     

Effect of pyridine on the kinetics of polymerization of methyl methacrylate initiated by benzoyl peroxide and azobisisobutyronitrile at 60°C

Solution polymerization of MMA, with pyridine as the solvent and BZ₂O₂ and AIBN as thermal initiators, was studied kinetically at 60°C. The monomer exponent varied from 0.45 to 0.91 as [BZ₂O₂] was increased from 1 × 10^?2 to 30 × 10^?2 mole/liter in a concentration range of 8.3-4.6 mole/liter for MMA. For AIBN-initiated polymerization the monomer exponent remained constant at 0.69 as [AIBN] varied from 0.4 × 10^?2 to 1.0 × 10^?2 mole/liter in the same concentration range for MMA. The k²_p/k_t Value increased in both cases with an increase in pyridine concentration in the system. This was explained in terms of an increase in the k_p value, which was due presumably to the increased reactivity of the chain radicals by donor-acceptor interaction between the molecules of solvent pyridine and propagating PMMA radicals and in terms of lowering the k_t value for the diffusion-controlled termination reaction due to an increase in the medium viscosity and pyridine content.     

Radical polymerization of methyl trans-β-vinylacrylate

Methyl trans-β-vinylacrylate (MVA) undergoes radical polymerization with α,α′-azobis(isobutyronitrile) (AIBN) in bulk and solution. The polymer obtained consists of 85% trans-1,4 and 15% trans-3,4 units. Poly(MVA) (PMVA) is readily soluble in common organic solvents, but insoluble in n-hexane and petroleum ether. PMVA exhibits a glass transition at 60°C, and loses no weight up to 300°C in nitrogen. The kinetics of MVA homopolymerization with AIBN was investigated in benzene. The rate of polymerization (R_p) can be expressed by R_p = k[AIBN]^0.5[MVA]^1.0, and the overall activation energy has been calculated to be 94 kJ/mol. The propagation radical of MVA at 80°C was detected by ESR spectroscopy, which indicated that the unpaired electron of the propagating radical was completely delocalized over the three allyl carbons. Furthermore, the steady-state concentration of the propagating radical of MVA at 60°C was determined by ESR spectroscopy, and the propagation rate constant (k_p) was calculated to be 1.25 X 10² L/mol ·s. Monomer reactivity ratios in copolymerization of MVA (M₂) with styrene (M₁) are r₁ = 0.16 and r₂ = 4.9, from which Q and e values of MVA are calculated as 4.2 and -0.32, respectively. © 1995 John Wiley & Sons, Inc.     

Kinetic study on the radical polymerization of 2‐methacryloyloxyethyl phosphorylcholine

Polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) was kinetically investigated in ethanol using dimethyl 2,2′‐azobisisobutyrate (MAIB) as initiator. The overall activation energy of the homogeneous polymerization was calculated to be 71 kJ/mol. The polymerization rate (R_p) was expressed by R_p = k[MAIB]^0.54±0.05 [MPC]^1.8±0.1. The higher dependence of R_p on the monomer concentration comes from acceleration of propagation due to monomer aggregation and also from retardation of termination due to viscosity effect of the MPC monomer. Rate constants of propagation (k_p) and termination (k_t) of MPC were estimated by means of ESR to be k_p = 180 L/mol · s and k_t = 2.8 × 10⁴ L/mol · s at 60 °C, respectively. Because of much slower termination, R_p of MPC in ethanol was found at 60 °C to be 8 times that of methyl methacrylate (MMA) in benzene, though the different solvents were used for MPC and MMA. Polymerization of MPC with MAIB in ethanol was accelerated by the presence of water and retarded by the presence of benzene or acetonitrile. Poly(MPC) showed a peculiar solubility behavior; although poly(MPC) was highly soluble in ethanol and in water, it was insoluble in aqueous ethanol of water content of 7.4–39.8 vol %. The radical copolymerization of MPC (M₁) and styrene (St) (M₂) in ethanol at 50 °C gave the following copolymerization parameters similar to those of the copolymerization of MMA and St; r₁ = 0.39, r₂ = 0.46, Q₁ = 0.76, and e₁ = +0.51. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 509–515, 2000     

Effect of LiClO4 on the radical polymerization of Di-2-[2-(2-methoxyethoxy)ethoxy]ethyl itaconate

The effect of LiClO₄ on the polymerization of di-2-[2-(2-methoxyethoxy)ethoxy]ethyl itaconate (DMEI) with dimethyl 2,2′-azobisisobutyrate (MAIB) was investigated in methyl ethyl ketone (MEK) kinetically and by ESR. The polymerization rate (R_p) at 50°C, where the concentrations of DMEI and MAIB were 1.00 and 5.00 × 10⁻² mol/L, increased with increasing [LiClO₄]. Marked acceleration was observed at higher [LiClO₄]s than 1.0 mol/L. The molecular weight of resulting polymer (ca. 10,000) was relatively insensitive to [LiClO₄], indicating occurrence of chain transfer. IR analysis of mixtures of LiClO₄/DMEI and LiClO₄/poly(DMEI) indicated complexation of LiClO₄ with DMEI and its polymer. The rate constants of propagation (k_p) and termination (k_t) were determined by ESR. k_p (1.7–10.5 L/mol s at 50°C) increased with [LiClO₄]. k_t (5.2–1.0 × 10⁴ L/mol s at 50°C) showed remarkable decrease at higher [LiClO₄]s than 1.0 mol/L. R_p of polymerization of equimolar complex of LiClO₄/DMEI with MAIB at 50°C in MEK was expressed by R_p = k[MAIB]^0.5[DMEI]^2.4. k_p increased and k_t decreased with [DMEI]. The activation energies of overall polymerization, propagation and termination were estimated to be 34.5, 8.0, and 59.4 kJ/mol. Copolymerization of DMEI with styrene was also profoundly affected by the presence of LiClO₄. Such large effects of LiClO₄ on the homo- and copolymerization of DMEI are explicable in term of association of LiClO₄-complexed DMEI monomers. © 1997 John Wiley & Sons, Inc.     

Kinetic study of the radical polymerization behavior of N‐(1‐phenylethylaminocarbonyl)methacrylamide

Polymerization of N‐(1‐phenylethylaminocarbonyl)methacrylamide (PEACMA) with dimethyl 2,2′‐azobisisobutyrate (MAIB) was kinetically studied in dimethyl sulfoxide (DMSO). The overall activation energy of the polymerization was estimated to be 84 kJ/mol. The initial polymerization rate (R_p) is given by R_p = k[MAIB]^0.6[PEACMA]^0.9 at 60 °C, being similar to that of the conventional radical polymerization. The polymerization system involved electron spin resonance (ESR) spectroscopically observable propagating poly(PEACMA) radical under the actual polymerization conditions. ESR‐determined rate constants of propagation and termination were 140 L/mol s and 3.4 × 10⁴ L/mol s at 60 °C, respectively. The addition of LiCl accelerated the polymerization in N,N‐dimethylformamide but did not in DMSO. The copolymerization of PEACMA(M₁) and styrene(M₂) with MAIB in DMSO at 60 °C gave the following copolymerization parameters; r₁ = 0.20, r₂ = 0.51, Q₁ = 0.59, and e₁ = +0.70. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2013–2020, 2005     

Radical and cationic polymerizations of 3‐ethyl‐3‐methacryloyloxymethyloxetane

3‐Ethyl‐3‐methacryloyloxymethyloxetane (EMO) was easily polymerized by dimethyl 2,2′‐azobisisobutyrate (MAIB) as the radical initiator through the opening of the vinyl group. The initial polymerization rate (R_p) at 50 °C in benzene was given by R_p = k[MAIB]^0.55 [EMO]^1.2. The overall activation energy of the polymerization was estimated to be 87 kJ/mol. The number‐average molecular weight (M?_n) of the resulting poly(EMO)s was in the range of 1–3.3 × 10⁵. The polymerization system was found to involve electron spin resonance (ESR) observable propagating poly(EMO) radicals under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) at 60 °C are 120 and 2.41 × 10⁵ L/mol s, respectively—much lower than those of the usual methacrylate esters such as methyl methacrylate and glycidyl methacrylate. The radical copolymerization of EMO (M₁) with styrene (M₂) at 60 °C gave the following copolymerization parameters: r₁ = 0.53, r₂ = 0.43, Q₁ = 0.87, and e₁ = +0.42. EMO was also observed to be polymerized by BF₃OEt₂ as the cationic initiator through the opening of the oxetane ring. The M?_n of the resulting polymer was in the range of 650–3100. The cationic polymerization of radically formed poly(EMO) provided a crosslinked polymer showing distinguishably different thermal behaviors from those of the radical and cationic poly(EMO)s. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1269–1279, 2001     

Radical polymerization of benzyl N-(2,6-dimethylphenyl)itaconamate

The polymerization of benzyl N-(2,6-dimethylphenyl)itaconamate (BDMPI) with benzoyl peroxide (BPO) in N,N-dimethylformamide (DMF) was studied kinetically by ESR. The polymerization rate (R_p) at 70°C was given by R_p = k[BPO]^0.78[BDMPI]^1.1. The overall activation energy of polymerization was determined to be 83.7 kJ/mol. The number-average molecular weight of poly(BDMPI) was in the range of 1500–2000 by gel permeation chromatography. From the ESR study, the polymerization system was found to involve ESR-observable propagating radicals of BDMPI under practical polymerization conditions. Using the polymer radical concentration by ESR, the rate constants of propagation (k_p) and termination (k_t) were determined in the temperature range of 50–70°C. The k_p value seemed dependent on the chain-length of propagating radical. The analysis of polymers by the MALDI-TOF mass spectrometry suggested that most of the resulting polymers contain the dimethylamino terminal group. The copolymerization of BDMPI (M₁) and styrene (M₂) at 50°C in DMF gave the following copolymerization parameters; r₁ = 0.49, r₂ = 0.26, Q₁ = 1.2, and e₁ = +0.63. The thermal behavior of poly(BDMPI) was examined by dynamic thermogravimetry and differential scanning calorimetry. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1891–1900, 1997     

Radical polymerization of 2-methacryloyloxyethyl phosphorylcholine in water: kinetics and salt effects

The homogeneous polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) as betaine monomer with potassium peroxydisulfate (KPS) was kinetically investigated in water by means of FT-near IR spectroscopy. The overall activation energy of the polymerization was estimated to be 12.8 kcal/mol. The initial polymerization rate (R_p) at 40 °C was given by R_p = k[KPS]^0.98[MPC]^1.9. The presence of alkaline metal halides accelerated the polymerization. The larger the radius of metal cation or halide ion was, the larger the accelerating effect was. The accelerating salt effect was explained by interactions of salt ions with ionic moieties of the propagating polymer radical and/or the MPC monomer. A kinetic study was also performed on the polymerization of MPC with KPS in water in the presence of NaCl of 2.5 mol/l. R_p at 40 °C was expressed by R_p = k[KPS]^0.6[MPC]^1.6. A very low value of 4.7 kcal/mol was obtained as the overall activation energy of the polymerization.     

Radical polymerization behavior of vinyl phenylsufonylacetate

Vinyl phenylsulfonylacetate (VPSA) was prepared by the reaction of vinyl chloroacetate with sodium benzenesulfinate in acetone in the presence of a phase-transfer catalyst. VPSA showed a high radical homopolymerizability similar to vinyl acetate in spite of the fact that VPSA carries a phenyl group. The polymerization of VPSA with 2,2^′-azobisisobutyrate (MAIB) was kinetically investigated in acetone. The overall activation energy of the polymerization was 27.6 kcal/mol. The polymerization rate (R_p) at 50 °C was expressed by R_p=k[MAIB]^0.67[VPSA]^1.1. Poly(VPSA) showed exothermic (27 °C) and endothermic (57 °C) peaks in its DCS curve, corresponding to crystallization and melting. The tacticity of poly(VPSA) was estimated to be rr=29, mr=49, and mm=22.     

Effect of amines on the ceric ion-initiated polymerization of vinyl monomers. II. Polymerization of acrylonitrile by ceric ion in presence of various substituted amines

The effect of various substituted amines on the polymerization of acrylonitrile initiated by ceric ammonium sulfate has been studied in aqueous solution at 30°C. It was found that the secondary and tertiary amines considerably increased the rate of polymerization, whereas the primary amines seemed to have no effect at all. From the kinetic studies it was found that the overall polymerization rate R_p is independent of ceric ion concentration and can be expressed by the equation: R_p = k₁ [amine] [monomer] + k₂[monomer]², where k₁ and k₂ are constants (involving different rate constants). The accelerating effect of the amines was attributed to a redox reaction between the ceric ion and the amine involving a single electron transfer, the relative activity of the different amines being thus dependent on the relative electron-donating tendency of the substituents present in the amine. The mechanism of the polymerization is discussed on the basis of these results, and various kinetic constants are evaluated.     

Study on the Kinetics of Polymerization of Tributyltin Methacrylate

The kinetics of polymerization of tributyltin methacrylate (TBTM) has been studied in benzene solution in the temperature range 60–75°C in the presence of azobisisobutyronitrile (AIBN). We have obtained the following polymerization rate equation: R _p = K _p [TBTM]^1.5 [AIBN]^0.5. It shows that the dependence of the polymerization rate on the concentrations of the monomer TBTM and the initiator AIBN are 1.5 and 0.5 order, respectively. The activation energy of polymerization was found to be 18.1 kcal/mol. The activation energy for the degree of polymerization is approximately -12.3 kcal/mol.