Complexation and determination of palladium (II) ion with para-Cl-phenylazo-R-acid spectrophotometrically

The complexation of para-Cl-phenylazo-R-acid azo dye with Pd(II) has been studied spectrophotometrically. Protonation constant (pK(a)) of the ligand has been calculated and the stability conditional constants of para-Cl-phenylazo-R-acid ligand with palladium ion has been determined at a constant temperature (25.0 degrees C), where the molar ratio of this complex is 1:1 (metal:ligand) with logbeta(1)=3.75, and 1:2 with logbeta(2)=8.55. Solid complex of para-Cl-phenylazo-R-acid has been prepared and characterized on the basis of elemental analysis and FTIR spectral data. A procedure for the spectrophotometric determination of Pd(II) using para-Cl-phenylazo-R-acid as a new azo chromophore is proposed where it is rapid, sensitive and highly specific. Beer's law was obeyed in the range 0.50-10.00 ppm at pH 5.0-6.0 to form a violet-red complex (epsilon=7.7 x 10(4) l(-1) mol(-1) cm(-1) at lambda(max)=560 nm). Metal ions such as Cu(II), Cr(III), La(III), Yb(III), Y(III), and Rh(III) interfere with the complex. Ammonium salt of trimellitic acid is used to precipitate some of the interfering ions and a scheme for separation of Pd(II) from a synthetic mixture similar in composition to platinum ore or deposit was made.     

Catalysis by methyltrioxorhenium(VII): reduction of hydronium ions by europium(II) and reduction of perchlorate ions by europium(II) and chromium(II)

The title reactions occur stepwise, the first and fastest being MeReO3 + Eu2+ --> Re(VI) + Eu3+ (k298 = 2.7 x 10(4) L mol(-1) s(-1)), followed by rapid reduction of Re(VI) by Eu2+ to MeReO2. The latter species is reduced by a third Eu2+ to Re(IV), a metastable species characterized by an intense charge transfer band, epsilon410 = 910 L mol(-1) cm(-1) at pH 1; the rate constant for its formation is 61.3 L mol(-1) s(-1), independent of [H+]. Yet another reduction step occurs, during which hydrogen is evolved at a rate v = k[Re(IV)][Eu2+][H+](-1), with k = 2.56 s(-1) at mu = 0.33 mol L(-1). The 410 nm Re(IV) species bears no ionic charge on the basis of the kinetic salt effect. We attribute hydrogen evolution to a reaction between H-ReVO and H3O+, where the hydrido complex arises from the unimolecular rearrangement of Re(III)-OH in a reaction that cannot be detected directly. Chromium(II) ions do not evolve H2, despite E(Cr) degrees approximately E(EU) degrees. We attribute this lack of reactivity to the Re(IV) intermediate being captured as [Re(IV)-O-Cr(III)]2+, with both metals having substitutionally inert d3 electronic configurations. Hydrogen evolution occurs in chloride or triflate media; with perchlorate present, MeReO2 reduces perchlorate to chloride, as reported previously [Abu-Omar, M. M.; Espenson, J. H. Inorg. Chem. 1995, 34, 6239-6240].     

A highly sensitive spectrophotometric determination of platinum(IV) using leuco xylene cyanol FF

A new, simple, highly sensitive and rapid spectrophotometric method has been described for the determination of platinum(IV). The method is based on the oxidation of leuco xylene cyanol FF (LXCFF) to its blue form of xylene cyanol FF by platinum(IV) in sulfuric acid medium (pH 1.0-2.5), the formed dye shows an absorption maximum at 620 nm in acetate buffer medium (pH 3.0-4.5). The method obeys Beer's law over a concentration range of 0.3 to 2.6 micro g mL(-1) platinum, having molar absorptivity and Sandell's sensitivity of 5.1x10(4) L mol(-)(1) cm(-1) and 0.0038 micro g cm(-2), respectively. The optimum reaction conditions and other analytical parameters have been evaluated. The developed method has been successfully applied to the determination of platinum in pharmaceutical preparations, soil, natural water, plant material, platinum-containing catalyst, and synthetic alloy samples.     

Disulphides of dithiophosphinic acids as analytical reagents-I Extractive spectrophotometric determination of palladium with some bis(dialkylthiophosphoryl)- and bis(diarylthiophosphoryl)disulphides

The disulphides of dithiophosphinic acids (DS) with the general formula R(2)P(S)SSP(S)R(2), where R = C(2)H(5), C(3)H(7), C(5)H(11), C(6)H(5) (I-IV) form coloured complexes of 1:3 stoichiometry with Pd(II). The absorption maxima and molar absorptivities are: a lambda(I) = 302 nm, epsilon(I) = 2.04 x 10(4) 1.mole(-1).cm(-1); lambda(II) = 305 nm, epsilon(II) = 2.58 x 10(4); lambda(III) = 303 nm, epsilon(III) = 2.60 x 10(4); lambda(IV) = 315 nm, epsilon(IV) = 3.25 x 10(4). The reaction takes about 3 min at room temperature, and the colour is stable for 24 hr. The influence of time, pH, reagent concentration, organic solvents and interferences have been studied. An extractive photometric method of determination of Pd(II) is described and applied to the determination of Pd(II) in a mixture of platinum metals.     

The surfactant sensitized analytical reaction of cerium(IV) with some triphenylformazan derivatives

Cationic surfactant, cetylpyridinium bromide (CPB), sensitizes the colour reaction of cerium(IV) with 1,3-o-hydroxyphenyl-5-phenylformazan(I), 1-m-hydroxyphenyl-3-o-hydroxyphenyl-5-phenylformazan(II) and 1-m-carboxyphenyl-3-o-hydroxyphenyl-5-phenylformazan(III). The formation of a soluble ternary complex of stoichiometric ratio 1:1:1 (Ce(IV)-R-CPB) is responsible for the observed enhancement in the molar absorptivity and Sandell sensitivity of the formed complex, when a surfactant is present. The ternary complex exhibits absorption maxima at 596, 571 and 607 nm (epsilon=6.05 x 10(4), 6.28 x 10(4) and 8.06 x 10(4)L mol(-1)cm(-1)) using triphenylformazan derivatives I, II and III, respectively. Beer's law is obeyed between 0.15 and 2.5 microg ml(-1), whereas, optimum concentration range applying Ringbom method is in the range 0.30-2.25 microg ml(-1). Conditional formation constants in the presence and absence of CPB for Ce(IV) complexes have been calculated. The proposed method has been successfully applied to the analysis of magnesium-base cerium alloys and synthetic mixtures corresponding to various cerium alloys.     

Separation via flotation, spectrophotometric speciation, and determination of vanadium(IV) in wastes of power stations.

1-(2-Hydroxy-4-methoxybenzophenone)-4-phenylthiosemicarbazone (HMBPT) was investigated as a new reagent for the flotation of vanadium(IV). At pH approximately 1.5, vanadium(IV) forms a 1:1 pale-violet complex with HMBPT in aqueous solution. An intense clear violet layer was formed after flotation, by adding an oleic acid (HOL) surfactant. The composition of the float was 1:1 [V(IV)]:[HMBPT]. A highly selective and sensitive spectrophotometric procedure was proposed for the determination of microamounts of V(IV) as its floated complex. The molar absorptivities of the V(IV)-HMBPT and V(IV)-HMBPT-HOL systems were 0.4 x 10(4) and 0.12 x 10(5) L mol(-1) cm(-1) at 560 nm, respectively. The formation constants of the species formed in the presence and absence of HOL were 4.6 x 10(7) and 8.7 x 10(5) L mol(-1), respectively. Beer's law was obeyed up to 1 x 10(-4) mol L(-1) in the aqueous layer as well as in the oleic acid layer. The HMBPT-V(IV) complexes formed in the aqueous solution and scum layer were characterized by elemental analysis, infrared and UV spectrophotometric studies. The mode of chelation between V(IV) and HMBPT is proposed to be due to a reaction between the protonated bidentate HMBPT ligand and V(IV) through the S=C and N=C groups. Interferences from various foreign ions were avoided by adding excess HMBPT and/or Na2S2O3 as a masking agent. The proposed flotation method was successfully applied to the analysis of V(IV) in synthetic mixtures, wastes of power stations, simulated samples and in real ores. The separation mechanism is discussed.     

Determination of trace amount of oxalic acid with zirconium(IV)-(DBS-arsenazo) by spectrophotometry

A novel method is proposed for the determination of trace amount of oxalic acid in the present article. In 1.0M hydrochloric acid medium, oxalic acid can react with the zirconium(IV) in Zr(IV)-(DBS-arsenazo) complex and replaces the DBS-arsenazo to produce a hyperchromic effect at 520 nm. The hyperchromic degree is proportional to the concentration of the oxalic acid added over a defined range. Based on this property, a new method for the spectrophotometric determination of trace oxalic acid was developed. Beer's law is held over the concentration range of 9.0 x 10(-6) to 5.0 x 10(-4)M for oxalic acid with a correlation coefficient of 0.9995. The apparent molar absorptivity of the method is epsilon520 nm = 1.16 x 10(3)L mol(-1)cm(-1) and the detection limit for oxalic acid is 0.815 microg/mL. The developed method was directly applied to the determination of oxalic acid in tomato samples with satisfactory results.     

Spectrophotometric studies on the complexation equilibria of Ni and Pb with 2-carboxy-2-hydroxy-5'-sulfo-formazylbenzene. Simultaneous determination of trace amounts of Ni and Pb

Spectrophotometric studies have been made to investigate the reaction of Nickel and Lead with 2-carboxy-2'-hydroxy-5'-sulfoformazyl-benzene (zincon) in 50%(v/v) ethanol-water at 25 degrees C and an ionic strength of 0.1 M NaClO4. A complete picture of the complexation equilibria in the pH range (4.2-12.0) for nickel and (1.9-11.5) for lead are presented. Simple, rapid, selective and sensitive methods for the spectro-photometric determination of nickel and lead has been developed based on the color reaction of their complexes with zincon. The methods allow the determination of 4.69 microg mL(-1) of nickel at pH = 6.3 (lambdamax = 665 nm) and 10.3 microg ml(-1) of lead at pH = 5.6 (lambdamax = 610 nm). The apparent molar absorptivities were epsilon = 1.3 x 10(4) L mol(-1) cm(-1) for nickel and epsilon = 0.6 x 10(4) L mol(-1) cm(-1) for lead. The interference of a large number of foreign ions and complexing agents has been studied. Thiosulphate, as masking agent allows the simultaneous determination of nickel and lead in the presence of high concentrations of copper. Ascorbic acid, sodium cyanide and or sodium fluoride provide the elimination of many other interferences. The methods have been applied successfully to the simultaneous determination of nickel and lead in an aluminium and non-ferrous alloy.     

Synthesis and cytotoxicity of dinuclear complexes containing ruthenium(II) bipyridyl units linked by a bis(pyridylimine) ligand

Enantiopure dinuclear ruthenium polypyridyl complexes of the form [Ru(2)(LL)(4)L(1)](PF(6))(4) (LL = 2,2'-bipyridine (bpy) or 1,10-phenanthroline (phen); L(1)= C(25)H(20)N(4) a bis(pyridylimine) ligand containing a diphenylmethane spacer) have been synthesized using the chiral building blocks cis-[Ru(bpy)(2)(py)(2)](2+) and cis-[Ru(phen)(2)(py)(2)](2+). These dinuclear ruthenium complexes have been characterised using NMR, mass spectrometry, UV-visible absorbance, circular dichroism and linear dichroism. The compounds exhibit good photo and thermal stability. The extinction coefficient for the bpy complex at 478 nm is epsilon(478) = 15,700 mol(-1) cm(-1) dm(3) and for the phen complex is epsilon(478) = 24,900 mol(-1) cm(-1) dm(3). Both complexes have their longest wavelength (metal to ligand charge transfer) transition predominantly x/y (short axis)-polarised while the transitions at shorter wavelength are a mixture of x/y and z-polarisations, similar to both the copper helicate and iron triple helicate studied previously. Cytotoxicity studies reveal that the compounds are dramatically less active against cancer cell lines than the recently reported supramolecular cylinders prepared from the same bis(pyridylimine) ligand.     

Determination of platinum(IV) by UV spectrophotometry

A simple, rapid and sensitive spectrophotometric procedure for the determination of platinum has been elaborated. Pt traces were determined in the form of the PtCl(6)(2-) complex in hydrochloric acid solution whose concentration varies from 0.01 to 2 mol L(-1) by measuring the absorbance at 260 nm. The detection limit is 4.7 x 10(-7) mol L(-1), the linearity range from 2 x 10(-6) mol L(-1) to 7 x 10(-6) mol L(-1), and the correlation coefficient is r=0.9990. No significant interferences were observed from a majority of the investigated ions, such as Zn(II), Pb(II), Mn(II), Cd(II), Co(II) and Ni(II) with the exception of Cu(II), Sb(III), Fe(III), Pd(II), Sn(II) and I(-) ions. The method was successfully applied for the determination of Pt traces in different solid samples and the recovery from inorganic materials was studied.     

A new tripodal iron(III) monophenolate complex: effects of ligand basicity, steric hindrance, and solvent on regioselective extradiol cleavage

The new iron(III) complex [Fe(L3)Cl(2)], where H(L3) is the tripodal monophenolate ligand N,N-dimethyl-N'-(pyrid-2-ylmethyl)-N'-(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine, has been isolated and studied as a structural and functional model for catechol dioxygenase enzymes. The complex possesses a distorted octahedral iron(III) coordination geometry constituted by the phenolate oxygen, pyridine nitrogen and two amine nitrogens of the tetradentate ligand, and two cis-coordinated chloride ions. The Fe-O-C bond angle (134.0 degrees) and Fe-O bond length (1.889 Angstrom) are very close to those (Fe-O-C, 133 degrees and 148 degrees, Fe-O(tyrosinate), 1.81 and 1.91 Angstrom) of protocatechuate 3,4-dioxygenase enzymes. When the complex is treated with AgNO(3), the ligand-to-metal charge transfer (LMCT) band around 650 nm (epsilon, 2390 M(-1) cm(-1)) is red shifted to 665 nm with an increase in absorptivity (epsilon, 2630 M(-1) cm(-1)) and the Fe(III)/Fe(II) redox couple is shifted to a slightly more positive potential (-0.329 to -0.276 V), suggesting an increase in the Lewis acidity of the iron(III) center upon the removal of coordinated chloride ions. Furthermore, when 3,5-di-tert-butylcatechol (H(2)DBC) pretreated with 2 mol of Et(3)N is added to the complex [Fe(L3)Cl(2)] treated with 2 equiv of AgNO(3), two intense catecholate-to-iron(III) LMCT bands (719 nm, epsilon, 3150 M(-1) cm(-1); 494 nm, epsilon, 3510 M(-1) cm(-1)) are observed. Similar observations are made when H(2)DBC pretreated with 2 mol of piperidine is added to [Fe(L3)Cl(2)], suggesting the formation of [Fe(L3)(DBC)] with bidentate coordination of DBC(2-). On the other hand, when H(2)DBC pretreated with 2 mol of Et(3)N is added to [Fe(L3)Cl(2)], only one catecholate-to-iron(III) LMCT band (617 nm; epsilon, 4380 M(-1) cm(-1)) is observed, revealing the formation of [Fe(L3)(HDBC)(Cl)] involving monodentate coordination of the catecholate. The appearance of the DBSQ/H(2)DBC couple for [Fe(L3)(DBC)] at a potential (-0.083 V) more positive than that (-0.125 V) for [Fe(L3)(HDBC)(Cl)] reveals that chelated DBC(2-) in the former is stabilized toward oxidation more than the coordinated HDBC(-). It is remarkable that the complex [Fe(L3)(HDBC)(Cl)] undergoes slow selective extradiol cleavage (17.3%) of H(2)DBC in the presence of O(2), unlike the iron(III)-phenolate complexes known to yield only intradiol products. It is probable that the weakly coordinated (2.310 Angstrom) -NMe(2) group rather than chloride in the substrate-bound complex is displaced, facilitating O(2) attack on the iron(III) center and, hence, the extradiol cleavage. In contrast, when the cleavage reaction was performed in the presence of a stronger base-like piperidine before and after the removal of the coordinated chloride ions, a faster intradiol cleavage was favored over extradiol cleavage, suggesting the importance of the bidentate coordination of the catecholate substrate in facilitating intradiol cleavage. Also, intradiol cleavage is favored in dimethylformamide and acetonitrile solvents, with enhanced intradiol cleavage yields of 94 and 40%, respectively.     

Rapid spectrophotometric determination of platinum with trifluoperazine dihydrochloride

Trifluoperazine dihydrochloride reacts with platinum(IV) in sodium acetate-hydrochloric acid buffer containing copper(II) catalyst to form a bluish-green 1:1 complex with absorbance maximum at 504 nm. A 50-fold ratio of reagent to metal ion is necessary for complete complexation. Beer's law is valid over the concentration range 0.5-8 ppm of platinum(IV) with optimum concentration range 1-7 ppm. The molar absorptivity is 6.50 x 10(3) l.mole(-1).cm(-1). The effects of pH, time, temperature, concentration of reagent and copper, order of addition of reagents, and the interferences from various ions are reported.     

Complexation equilibria and spectrophotometric determination of iron(III) with 1-amino-4-hydroxyanthraquinone

The complex equilibria of iron(III) with 1-amino-4-hydroxyanthraquinone (AMHA) were studied spectrophotometrically in 40% (v/v) ethanol and an ionic strength of 0.1M (NaClO(4)). The complexation reactions were demonstrated and characterized using graphical logarithmic analysis of the absorbance-pH graphs. A simple, rapid, selective and sensitive method for the spectrophotometric determination of trace amounts of Fe(III) is developed based on the formation of Fe(AMHA) complex at pH 2.5 (lambda(max) = 640 nm, epsilon approximately = 2.1 x 10(4) L. mol(-1) . cm(-1)) in the presence of a large number of foreign ions. Interferences caused by palladium(II) was masked by the addition of cyanide ions. The method has been applied to the determination of iron in some synthetic samples and polymetallic iron ores.     

2,2'-Diaminodiphenyldisulphide-a new sensitive spectrophotometric reagent for platinum

2,2'-Diaminodiphenyldisulphide is a highly sensitive platinum chromogen. Platinum(IV) forms a complex with it in 50% aqueous ethanol at pH 5.0-6.0, having maximum absorption at 725 nm. The molar absorptivity of the complex is 5.48 x 10(4)1.mole(-1).cm(-1) at 725nm and the sensitivity is 0.0035 mug/cm(2). The colour system obeys Beer's law from 0.25 to 5 ppm with optimum concentration range 0.75-4 ppm of platinum. The relative error is 2.7%. The metal to reagent ratio is 1:2, and the stepwise formation constants K(1) and K(2) are 5.6 x 10(4) and 1.96 x 10(4) respectively.     

Non-extraction batchwise and FIA determination of cationic and nonionic surfactants using Cu(II)-chromazurol S-surfactant complexes

Batchwise and FIA determinations have been developed for cationic and nonionic surfactants, based on the formation of ternary Cu(II)-chromazurol S-surfactant compounds. Optimum reaction conditions have been found (pH 8.0, lambda=590 and 630 nm, respectively). For the batchwise measurement, the molar absorption coefficient values epsilon(590)=5.1-5.7x10(4) l mol(-1) cm(-1) for cationic surfactants, epsilon(630)=0.7-1.5x10(4) l mol(-1) cm(-1) for nonionic surfactants. A factorial design has been carried out to determine the optimum flow conditions. Calibration curves were constructed and statistically evaluated for both the batchwise and FIA determination. For example, the linear concentration ranges for batch determination of the cationic surfactant cetyltrimethylammonium bromide and nonionic surfactant Marlophen NP 10 are 0-15 mug ml(-1) (R=0.9996, R.S.D.=6.62-0.64%) and 13-53 mug ml(-1) (R=0.9993, R.S.D.=4.48-1.40%), respectively; the respective detection limits are 0.02 and 4.0 mug ml(-1). For FIA determination of the same surfactants, the linear concentration ranges are 0-13 mug ml(-1) (R=0.9995, R.S.D.=4.44-0.49%) and 66-397 mug ml(-1) (R=0.9994, R.S.D.=8.92-1.12%), respectively, detection limits are 0.08 and 38 mug ml(-1), respectively.     

Highly selective and sensitive reaction of cyanide with 2,2-dihydroxy-1,3-indanedione

A novel reaction of cyanide with 2,2-dihydroxy-1,3-indanedione in the presence of sodium carbonate is described. It is highly selective and sensitive, and suitable for the determination of hydrogen cyanide in the environment and free cyanide ions in water, blood, urine, serum, etc. As little as 1.25x10(-7) mol x L(-1) CN(-) (3.25x10(-9) g x mL(-1) cyanide) can be determined by use of this reaction. The color system obeys Beer's law in the range 10 ng x mL(-1) to 1.0 microg x mL(-1) at 510 nm. The molar absorptivity was 8.0x10(4) L x mol(-1) x cm(-1) for a solution of concentration 0.2 microg x mL(-1). All other important analytical properties of the reaction have been studied. It is proposed that the purple color produced under these reaction conditions is that of 2-cyano-1,2,3-trihydroxy-2 H indene.     

Synthesis of N-o-methylphenyl-N'-(sodium p-aminobenzene-sulfonate) thiourea and its chromogenic reaction with palladium(II).

A new chromogenic reagent, N-o-methylphenyl-N'-(sodium p-aminobenzenesulfonate)thiourea (MSAT), has been synthesized and characterized by elemental analysis, (1)H-NMR, FT-IR and UV-Vis spectra. Based on the absorption spectrum of the colored complex of MSAT with palladium(II), a novel spectrophotometric method for the determination of palladium has been developed. In a pH 4.0 - 5.5 HAc-NaAc buffer solution, palladium(II) reacted with MSAT to form a stable yellow water-soluble complex with an apparent molar absorptivity of epsilon = 2.04 x 10(5) L mol(-1) cm(-1) at the maximum absorption of 318.0 nm. Beer's law was obeyed in the concentration range of 1.2 - 11.8 microg per 25 mL for palladium(II) with a correlation coefficient of 0.9997. The probable interfering ions and their tolerable limits have also been investigated in detail. The proposed method is simple, rapid, and sensitive, and has been applied to the determination of palladium in anode mud and ore samples with satisfactory results.     

Spectrophotometric determination of some drugs for osteoporosis

Three simple, accurate and sensitive spectrophotometric methods are developed for the determination of some new drugs for the treatment of osteoporosis: risedronate sodium (I), alendronate sodium (II) and etidronate disodium (III). The first method is based on the measurement of difference in absorbance (Delta A) of risedronate sodium in 0.01 mol l(-1) hydrochloric and 0.1 mol l(-1) sodium hydroxide at 262 nm. Beer's law is obeyed over a concentration range of 15-150 microg ml(-1) with mean recovery 99.75+/-1.22 and molar absorptivity (epsilon) 1.891 x 10(3). The second method is based on the reaction of the primary amino group of (II) with ninhydrin reagent in methanolic medium in the presence of 0.05 mol l(-1) sodium bicarbonate. The colored product is measured at 568 nm, and the linearity range is found to be 3.75-45 microg ml(-1) with mean recovery 99.77+/-0.73 and epsilon 9.425 x 10(3). The third method is based on oxidation of the three mentioned drugs with ceric (IV) sulphate in 0.5 mol l(-1) sulphuric acid at room temperature and subsequent measurement of the excess unreacted cerium (IV) sulphate at 320 nm. The method obeyed Beer's law over a concentration range of 2-24 microg ml(-1) for the three drugs with mean recovery 99.79+/-1.16, 99.73+/-1.38 and 99.86+/-1.13 and epsilon 14.427 x 10(3), 13.813 x 10(3) and 14.000 x 10(3) for drugs I, II, III respectively. The proposed methods were successfully applied for the determination of the studied drugs in bulk powder and in pharmaceutical formulations. The results were found to agree statistically with those obtained the reported methods. Furthermore, the methods were validated according to USP regulations and also assessed by applying the standard addition technique.     

Spectrophotometric determination of thorium in standard samples and monazite sands based on the floated complex of thorium with N-hydroxy-N,N′-diphenylbenzamidine and thorin

A selective and sensitive spectrophotometric method for the determination of Th(IV) has been based on the reaction with thorin and subsequent extraction of the red-orange coloured complex with N-hydroxy-N,N'-diphenylbenzamidine (HDPBA) in benzene as floated complex at pH 2.2. The complex in ethanol exhibits a maximum absorbance at 495 nm, with a molar absorptivity of 6.0x10(4) l mol(-1) cm(-1), with a Sandell's sensitivity of 3.9x10(-3) microg cm(-2). The method follows Beer's law up to 3.0 microg Th(IV) ml(-1). None of the common cations and anions tested interfere. The detection limit of the method is 0.04 microg Th(IV) ml(-1), the RSD (n=10) is 1.4%. The method has been successfully employed for the determination of thorium in various standard and monazite samples.     

Spectrophotometric determination of cerium subgroup rare earths in nickel-base alloys in the presence of yttrium with p-acetylchlorophosphonazo and mixed surfactants

Rare earth elements react with p-acetylchlorophosphonazo (CPApA) to form colour complexes. In the presence of emulsifier OP and cetylpyridinium chloride (CPC), the yttrium complex is not formed because of micellar masking, while the cerium subgroup rare earths give more sensitive reactions with CPApA(epsilon(Ce) = 1.16 x 10(5) 1 . mol(-1) . cm(-1)) due to micellar sensitization. Most foreign ions can be tolerated in considerable amounts. The optimum conditions of the complex formation reaction and the composition of the Ce-CPApA complex are described. A simple method is proposed for the determination of cerium subgroup rare earths in nickel-base alloys with satisfactory results.