Intramolecularly coordinated organoantimony(III) carboxylates

The reactions of organoantimony chlorides L^1,2SbCl₂1 and 2 ([2,6-(ROCH₂)₂C₆H₃]⁻, R = Me; L¹ and R = t-Bu; L²) with silver salts of selected carboxylic acids resulted to corresponding organoantimony carboxylates L^1,2Sb(OOCR′)₂, 1a-c (for L¹) and 2a-c (for L²), where R′ = CH₃ for 1a, 2a; R′ = CHCH₂ for 1b, 2b and R′ = CF₃ for 1c, 2c. All compounds were characterized by the help of elemental analysis, ESI-MS, ¹H and ¹³C NMR spectroscopy. The solid state structure investigation using single crystal X-ray diffraction techniques (2a, c) and IR spectroscopy revealed significant differences in coordination mode of both O,C,O chelating ligand and carboxylic groups in this set of compounds. The structure of all compounds in solution of non-coordinating solvent (CDCl₃) was determined by means of variable temperature ¹H, ¹³C, ¹⁹F NMR spectroscopy and IR spectroscopy.     

Aqueous syntheses of [(Cp-R)M(CO)3] type complexes (Cp = cyclopentadienyl, M = Mn, Tc, Re) with bioactive functionalities

We describe reactions of [^99mTc(H₂O)₃(CO)₃)]⁺ (1) with Diels-Alder products of cyclopentadiene such as “Thiele’s acid” (HCp-COOH)₂ (2) and derivatives thereof in which the corresponding [(Cp-COOH)^99mTc(CO)₃)] (3) complex did form in water. We propose a metal mediated Diels-Alder reaction mechanism. To show that this reaction was not limited to carboxylate groups, we synthesized conjugates of 2 (HCp-CONHR)₂ (4a-c) (4a, R = benzyl amine; 4b, R = N_α-Boc-l-2,3-diaminopropionic acid and 4c, R = glycine). The corresponding ^99mTc complexes [(4a)^99mTc(CO)₃)] 6a, [(4b)^99mTc(CO)₃)] 6b and [(4c)^99mTc(CO)₃)] 6c have been prepared along the same route as for Thiele’s acid in aqueous media demonstrating the general applicability of this synthetic strategy. The authenticity of the ^99mTc complexes on the no carrier added level have been confirmed by chromatographic comparison with the structurally characterized manganese or rhenium complexes.Studies of the reaction of 1 with Thiele’s acid bound to a solid phase resin demonstrated the formation of [(Cp-COOH)^99mTc(CO)₃)] 3 in a heterogeneous reaction. This is the first evidence for the formation of no carrier added ^99mTc radiopharmaceuticals containing cyclopentadienyl ligands via solid phase syntheses. Macroscopically, the manganese analogue 5a and the rhenium complexes 5b-c have been prepared and characterized by IR, NMR, ESI-MS and X-ray crystallography for 5a (monoclinic, P2₁/c, a = 9.8696(2) Å, b = 25.8533(4) Å, c = 11.8414(2) Å, β = 98.7322(17)°) in order to unambiguously assign the authenticity of the corresponding ^99mTc complexes.     

Reactivity studies of (η-arene)ruthenium dimeric complexes towards pyrazoles: isolation of amidines, bis pyrazoles and chloro bridged pyrazole complexes

The complex [(η⁶-p-cymene)Ru(μ-Cl)Cl]₂1 reacts with pyrazole ligands (3a-g) in acetonitrile to afford the amidine derivatives of the type [(η⁶-p-cymene)Ru(L)(3,5-HRR′pz)](BF4)₂ (4a-f), where L = {HNC(Me)3,5-RR′pz}; R, R′ = H (4a); H, CH₃ (4b); C₆H₅ (4c); CH₃, C₆H₅ (4d) OCH₃ (4e); and OC₂H₅ (4f), respectively. The ligand L is generated in situ through the condensation of 3,5-HRR′pz with acetonitrile under the influence of [(η⁶-p-cymene)RuCl₂]₂. The complex [(η⁶-C₆Me₆)Ru(μ-Cl)Cl]₂2 reacts with pyrazole ligands in acetonitrile to yield bis-pyrazole derivatives such as [(η⁶-C₆Me₆)Ru (3,5-HRR′pz)₂Cl](BF₄) (5a-b), where R, R′ = H (5a); H, CH₃ (5b), as well as dimeric complexes of pyrazole substituted chloro bridged derivatives [{(η⁶-C₆Me₆)Ru(μ-Cl) (3,5-HRR′pz)}₂](BF₄)₂ (5c-g), where R, R′ = CH₃ (5c); C₆H₅ (5d); CH₃, C₆H₅ (5e); OCH₃ (5f); and OC₂H₅ (5g), respectively. These complexes were characterized by FT-IR and FT-NMR spectroscopy as well as analytical data. The molecular structures¹ of representative complexes [(η⁶-C₆Me₆)Ru{3(5)-Hmpz}₂Cl]⁺5b, [(η⁶-C₆Me₆)Ru(μ-Cl)(3,5-Hdmpz)]₂²⁺5c and [(η⁶-C₆Me₆)Ru(μ-Cl){3(5)Me,5(3)Ph-Hpz}]₂²⁺5e were established by single crystal X-ray diffraction studies.     

Mononuclear Cu and dinuclear Cu–Ln complexes of benzimidazole based ligands including N and O donors: Syntheses,characterization, X-ray molecular structures and magnetic properties

The synthesis of two mononuclear precursor copper complexes, [(HL²)₂Cu], 1, and [(HL³)₂Cu]·H₂O, 2, and three dinuclear Cu–Ln complexes, [(HL¹)₂Cu(CH₃CN)₂Gd(NO₃)₃], 3, [(HL³)₂CuGd(NO₃)₃]·2(H₂O), 4, and [(HL³)₂CuTb(NO₃)₃]·2(H₂O), 5, based on the ligands H₂L¹ (4-bromo-2-[1-(5-bromo-2-hydroxy-3-methoxybenzyl)-1H-benzimidazol-2-yl]-6-methoxyphenol), H₂L² (2-(1H-benzimidazol-2-yl)-4-bromo-6-methoxyphenol) and H₂L³ (2-(1H-benzimidazol-2-yl)-6-methoxyphenol) are described in this contribution. The X-ray crystal structures of H₂L², 1, 3, 4, and 5 have been solved. The novel ligand H₂L² crystallizes with two independent molecules in the asymmetric unit; several intermolecular hydrogen contacts connect alternate independent H₂L² molecules into chains developing along c. In complex 1, two (HL²)⁻ ligands chelate the copper ion through their imidazolyl nitrogen and phenoxo oxygen atoms, in a relative head to tail arrangement. The molecular structure of 3 is similar to those of the previously reported Cu–Ln complexes of H₂L¹. In the isostructural complexes 4 and 5, two HL³ ligands sandwich one Cu²⁺ ion through their N,O sites and one Ln³⁺ ion through their O₂ site, implying a relative head to head arrangement, at variance with the relative head to tail arrangement of HL² in the mononuclear copper precursor 1. The magnetic properties of 1, 3, 4, and 5 have been investigated. Extended intermolecular antiferromagnetic interactions operate in complex 1 ((J_Chain = −0.8(1) cm⁻¹). Ferromagnetic interactions between Gd (S = 7/2) and Cu (S = 1/2) centers operate in complexes 3 and 4, leading to an S = 4 ground state (J_CuGd = 7.2(2) cm⁻¹ for 3 and J_CuGd = 6.5(2) cm⁻¹ for 4). Depopulation of the Tb Stark levels, preclude obtaining reliable information on the presence and sign of the Cu–Tb interaction in 5. These new complexes are complementary to those previously reported: the Cu–O₂–Gd core is planar while deformations are borne by the ligands at variance with previous examples where the constraints were located at the Cu–O₂–Gd core. The presence of two independent ligands in the Cu,Gd coordination spheres confers a degree of freedom greater than that allowed by a unique tetradentate ligand. As a result, the strength of the magnetic interaction is not solely related to the dihedral angle between the CuOO and GdOO planes in the central core.     

The cyclopalladation reaction of 2-phenylaniline revisited

2-Phenylaniline reacted with Pd(OAc)₂ in toluene at room temperature for 24 h in a one-to-one molar ratio and with the system PdCl₂, NaCl and NaOAc in a 1 (2-phenylaniline):1 (PdCl₂):2 (NaCl):1 (NaOAc) molar ratio in methanol at room temperature for one week to give the dinuclear cyclopalladated compounds (μ-X)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ [1a (X = OAc) and 1b (X = Cl)] in high yield. Moreover, the reaction between 2-phenylaniline and Pd(OAc)₂ in one-to-one molar ratio in acid acetic at 60 °C for 4 h, followed by a metathesis reaction with LiBr, allowed isolation of the dinuclear cyclopalladated compound (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ (1c) in moderate yield. A parallel treatment, but using monodeuterated acetic acid (DOAc) as solvent in the cyclopalladation reaction, allowed isolation of a mixture of compounds 1c, 1c_d1 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄](μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃] and 1c_d2 (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃}]₂ in moderate yield and with a deuterium content of ca. 60%. 1a and 1b reacted with pyridine and PPh₃ affording the mononuclear cyclopalladated compounds [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(X)(L)] [2a (X = OAc, L = py), 2b (X = Cl, L = py), 3a (X = OAc, L = PPh₃) and 3b (X = Cl, L = PPh₃)] in a yield from moderate to high. Furthermore, 1a reacted with Na(acac) · H₂O to give the mononuclear cyclopalladated compound 4 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(acac)] in moderate yield. ¹H NMR studies in CDCl₃ solution of 2a, 2b, 3a, 3b and 4 showed that 2a and 3a presented an intramolecular hydrogen bond between the acetato ligand and the amino group, and were involved in a dynamic equilibrium with water present in the CDCl₃ solvent; and that the enantiomeric molecules of 2b and 4 were in a fast exchange at room temperature, while they were in a slow exchange for 2a, 3a and 3b. The X-ray crystal structures of 3b and 4 were determined. 3b crystallized in the triclinic space group with a = 9.9170(10), b = 10.4750(10), c = 12.0890(10) Å, α = 98.610(10)°, β = 94.034(10)° and γ = 99.000(10)° and 4 in the monoclinic space group P2₁/a with a = 11.5900(10), b = 11.2730(10), c = 12.2150(10) Å, α = 90°, β = 107.6560(10)° and γ = 90°.     

Part 1: 1,3-Dipolar addition of activated alkyne towards coordinated azido group in ruthenium(II) complexes containing η-cyclichydrocarbons

The indenyl and pentamethylcyclopentadienyl ruthenium(II) complexes [(η⁵-L₃)Ru(L₂)Cl] (L₃ = C₉H₇, L₂ = dppe (1a), L₂ = dppm (1b); L₃ = C₅Me₅, L₂ = dppe (2a); L₂ = dppm (2b) (where, dppe = Ph₂PCH₂CH₂PPh₂ and dppm = Ph₂PCH₂PPh₂) reacts with NaN₃ to yield the azido complexes [(η⁵-C₉H₇)Ru(L₂)N₃], L₂ = dppe (3a), dppm (3b) and [(η⁵-C₅Me₅)Ru(L₂)N₃], L₂ = dppe (4a), dppm (4b), respectively. The azido complexes undergo [3 + 2] dipolar cycloaddition reaction with dimethylacetylenedicarboxylate to yield triazole complexes [(η⁵-C₉H₇)Ru(L₂)(N₃C₂(CO₂Me)₂)], L₂ = dppe (5a), dppm (5b) and [(η⁵-C₅Me₅)Ru(L₂)(N₃C₂(CO₂Me)₂)], L₂ = dppe (6a), dppm (6b), respectively. The complexes were fully characterized on the basis of microanalyses, FT-IR and NMR spectroscopy. The crystal structures of the starting complex (1a) and representative complexes 5a, 5b and 6a have been established by single X-ray study.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

The (phosphino)tetraphenylborate ligand in ruthenium-arene chemistry

The synthesis of a series of anionic half-sandwich ruthenium-arene complexes [E][RuCl₂(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (E = Bu₄N⁺: R = Ph, 1a, ⁱPr, 1b or Cy, 1c; E = bis(triphenylphosphine)iminium or PNP⁺: R = Ph, 1a′, ⁱPr, 1b′ or Cy, 1c′) are reported. X-ray crystallographic studies of 1a′ and 1b′ confirmed the three-legged piano-stool coordination geometry. In solution, complexes 1a-c and 1a′-c′ are proposed to form monomer-dimer equilibria as a result of chloride ligand dissociation. Complexes 1a-c and 1a′-c′ also form the formally neutral zwitterionic complexes [RuCl(L)(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (L = pyridine: R = Ph, 2a, ⁱPr, 2b or Cy, 2c; L = MeCN: R = Ph, 3a, ⁱPr, 3b or Cy, 3c) via chloride ligand abstraction using AgNO₃ or MeOTf.     

Formation of 5-phenyl-1,2-dithiole-3-thione from molybdenum dithiopropiolato complexes

Molybdenum dithiopropiolato complexes, [(η⁵-C₅R₄R^′)Mo(CO)₂(η²-S₂CCCPh)] (R=H, R^′=Me 1a, R=R^′=H 1b; R=R^′=Me 1c) react with trimethylamine-N-oxide (TMNO · 2H₂O) under mild thermolysis to form 5-phenyl-1,2-dithiole-3-thione (2). The reaction proceeds through the formation of the oxo-complexes, [(η⁵-C₅R₄R^′)Mo(O)(η³-S₂CCCPh)] (R=H, R^′=Me 3a, R=R^′=H 3b; R=R^′=Me 3c). Direct reaction of 3a-c with TMNO · 2H₂O under thermolysis also results in formation of 2.     

Synthetic, spectral and structural studies of some homo and hetero binuclear arene ruthenium (II) polypyridyl complexes

Homo-hetero binuclear cationic complexes with the formulation [(η⁶-arene)RuCl(μ-dpp)(L)]⁺ (η⁶-arene = benzene; L = PdCl₂ (1a); PtCl₂ (1b), and η⁶-arene = p-cymene; L = PdCl₂ (2a); PtCl₂ (2b)), [(η⁶-arene)RuCl(μ-dpp)(L)]²⁺(η⁶-arene = p-cymene; L = [(η⁶-C₆H₆)RuCl] (2c), and [(η⁶-C₁₀H₁₄)RuCl] (2d)) were prepared. Molecular structure of the representative homo binuclear complex [{(η⁶-C₁₀H₁₄)RuCl}(μ-dpp){(η⁶-C₁₀H₁₄)RuCl}](PF₆)₂ (2d) was determined crystallographically. Weak interaction studies on the complex 2d revealed stabilisation of the crystal packing by weak inter and intra molecular C-H?X (X = F, Cl, π) and π-π interactions. The C-H?F interactions lead to parallel helical chains and encapsulation of counter anion in self-assembled cavity arising from C-H?π and π-π weak interactions.     

Orthopalladation of phosphorus ylides in endo position with bidentate ligands

The ortho-metallated complexes [Pd₂{κ²(C,C)-C₆H₄(PPh₂CHC(O)C₆H₅R}₂(μ-Cl)₂] (R = Ph (1a), NO₂ (1b), Br (1c)) were prepared by refluxing equimolar mixtures of Ph₃PCHC(O)C₆H₅R, (R = Ph, NO₂, Br) and Pd(OAc)₂ in MeOH, followed by an excess of NaCl. The dinuclear complexes (1a-1c) react with silver trifluoromethylsulfonate and bidentate ligands [L = bipy (2,2′-bipyridine), phen (phenanthroline), dppe (bis(diphenylphosphino)ethane), dppp (bis(diphenylphosphino)propane)] giving the mononuclear stabilized orthopalladated complexes in endo position [Pd{κ²(C,C)-C₆H₄(PPh₂CHC(O)R}L](OTf) [R = Ph, L = phen (2a), bipy (3a), dppe (4a), dppp (5a); R = NO₂, L = phen (2b), bipy (3b), dppe (4b), dppp (5b); R = Br, L = phen (2c), bipy (3c), dppe (4c), dppp (5c); OTf = trifluoromethylsulfonate anion]. Orthometalation and ylidic C-coordination are demonstrated by an X-ray diffraction study of 2c and 3c. In the structures, the palladium atom shows a slightly distorted square-planar coordination geometry.     

Nucleophilic substitution reactions at the Si-Cl bonds of the dichloro(methyl)silyl ligand in five- and six-coordinate complexes of ruthenium(II) and osmium(II)

Treatment of either RuHCl(CO)(PPh₃)₃ or MPhCl(CO)(PPh₃)₂ with HSiMeCl₂ produces the five-coordinate dichloro(methyl)silyl complexes, M(SiMeCl₂)Cl(CO)(PPh₃)₂ (1a, M = Ru; 1b, M = Os). 1a and 1b react readily with hydroxide ions and with ethanol to give M(SiMe[OH]₂)Cl(CO)(PPh₃)₂ (2a, M = Ru; 2b, M = Os) and M(SiMe[OEt]₂)Cl(CO)(PPh₃)₂ (3a, M = Ru; 3b, M = Os), respectively. 3b adds CO to form the six-coordinate complex, Os(SiMe[OEt]₂)Cl(CO)₂(PPh₃)₂ (4b) and crystal structure determinations of 3b and 4b reveal very different Os-Si distances in the five-coordinate complex (2.3196(11) Å) and in the six-coordinate complex (2.4901(8) Å). Reaction between 1a and 1b and 8-aminoquinoline results in displacement of a triphenylphosphine ligand and formation of the six-coordinate chelate complexes M(SiMeCl₂)Cl(CO)(PPh₃)(κ²(N,N)-NC₉H₆NH₂-8) (5a, M = Ru; 5b, M = Os), respectively. Crystal structure determination of 5a reveals that the amino function of the chelating 8-aminoquinoline ligand is located adjacent to the reactive Si-Cl bonds of the dichloro(methyl)silyl ligand but no reaction between these functions is observed. However, 5a and 5b react readily with ethanol to give ultimately M(SiMe[OEt]₂)Cl(CO)(PPh₃)(κ²(N,N-NC₉H₆NH₂-8) (6a, M = Ru; 6b, M = Os). In the case of ruthenium only, the intermediate ethanolysis product Ru(SiMeCl[OEt])Cl(CO)(PPh₃)(κ²(N,N-NC₉H₆NH₂-8) (6c) was also isolated. The crystal structure of 6c was determined. Reaction between 1b and excess 2-aminopyridine results in condensation between the Si-Cl bonds and the N-H bonds with formation of a novel tridentate “NSiN” ligand in the complex Os(κ³(Si,N,N)-SiMe[NH(2-C₅H₄N)]₂)Cl(CO)(PPh₃) (7b). Crystal structure determination of 7b shows that the “NSiN” ligand coordinates to osmium with a “facial” arrangement and with chloride trans to the silyl ligand.     

Palladiumdichloride (ferrocenylethynyl)phosphanes and their use in Pd-catalyzed Heck-Mizoroki- and Suzuki-Miyaura carbon-carbon cross-coupling reactions

In this work the synthesis of phosphane selenides (FcCC)_nPh_3−nPSe (2a, n = 1; 2b, n = 2; 2c, n = 3; Fc = ferrocenyl, (η⁵-C₅H₄)(η⁵-C₅H₅)Fe) from (FcCC)_nPh_3−nP (1a, n = 1; 1b, n = 2; 1c, n = 3) and selenium is described to estimate the σ-donor properties of these systems by ³¹P{¹H} NMR spectroscopy. Progressive replacement of phenyl by ferrocenylethynyl causes a shielding of the phosphorus atom with increasing of the ¹J(³¹P-⁷⁷Se) coupling constants.The palladiumdichloride metal-organic complexes [((FcCC)_nPh_3−nP)₂PdCl₂] (3a, n = 1; 3b, n = 2; 3c, n = 3) have been used as (pre)catalysts in the Suzuki-Miyaura (reaction of 2-bromo-toluene (4a) and 4-bromo-acetophenone (4b), respectively, with phenyl boronic acid (5) to give 2-methyl biphenyl (6a) and 4-acetyl biphenyl (6b)) and in the Heck-Mizoroki reaction (treatment of iodobenzene (7) with tert-butyl acrylate (8) to give E-tert-butyl cinnamate (9)).The structures of molecules 1a, 1c, 2c, and 3c in the solid state were determined by single X-ray structure analysis showing that the structural parameters of these systems are unexceptional and correspond to those of related phosphanes, seleno phosphanes, and palladium dichloride complexes.     

Syntheses and characterization of η-hexamethylbenzeneruthenium(II)-β-diketone complexes: their reactions with mono- and bidentate neutral ligands

The complex [(η⁶-C₆Me₆)Ru(μ-Cl)Cl]₂1 react with sodium salts of β-diketonato ligands in methanol to afford the oxygen bonded neutral complexes of the type [(η⁶-C₆Me₆)Ru(κ²-O,O′-R¹COCHCOR²)Cl] {R¹, R² = CH₃ (2), CH₃, C₆H₅ (3), C₆H₅ (4), OCH₃ (5), OC₂H₅ (6)}. Complex 4 with AgBF₄ yields the γ-carbon bonded ruthenium dimeric complex 7. Complex 4 also reacts with tertiary phosphines and bridging ligands to yield complexes of the type [(η⁶-C₆Me₆)Ru(κ²-O,O′-C₆H₅COCHCOC₆H₅)(L)]⁺ (L = PPh₃ (8), PMe₂Ph (9)) and [{η⁶-C₆Me₆)Ru(κ²-O,O′-C₆H₅COCHCOC₆H₅)}₂(μ-L)] L = 4,4′-bipyridine (4,4′-bipy) (11), 1,4-dicyanobenzene (DCB) (12) and pyrazine (Pz) (13). Complexes 2-4 react with sodium azide to yield neutral complexes [(η⁶-C₆Me₆)Ru(κ²-O,O′-R¹COCHCOR²)N₃] {R¹, R² = CH₃ (10a), CH₃, C₆H₅ (10b), C₆H₅ (10c). All these complexes were characterized by FT-IR and FT-NMR spectroscopy as well as analytical data. The molecular structures of complexes [(η⁶-C₆Me₆)Ru(κ²-O,O′CH₃COCH-COC₆H₅)Cl] (3) and [(η⁶-C₆Me₆)Ru(κ²-O,O′-C₆H₅COCHCOC₆H₅] (4) were established by single crystal X-ray diffraction studies. The complex 3 crystallizes in the triclinic space group, [a = 7.9517(4), b = 9.0582(4) and c = 14.2373(8) Å, α = 88.442(3)°, β = 76.6.8(3)° and γ = 81.715(3)°. V = 987.17(9) ų, Z = 2]. Complex 4 crystallizes in the monoclinic space group, P2₁/c [a = 7.5894(8), b = 20.708(2) and c = 29.208(3) Å,β = 92.059(3)° V = 4587.5(9) ų, Z = 8].     

Effect of π-accepting substituent on the reactivity and spectroscopic characteristics of triarylbismuthanes and triarylbismuth dihalides

Competitive chlorination of p-substituted triarylbismuthanes 1 [(p-XC₆H₄)₃Bi; a: X = OMe, c: Cl, d: CO₂Et, e: CF₃, f: CN, g: NO₂] and trimesitylbismuthane (2,4,6-Me₃C₆H₂)₃Bi 1h by sulfuryl chloride was carried out against 1b (X = H) and the effect of these substituents on the formation of triarylbismuth dichlorides 2 was studied. The relative ratios 2/2b decreased with increasing electron-withdrawing ability of the substituents (2a/2b = 53/47, 2c/2b = 33/67, 2d/2b = 35/65, 2e/2b = 29/71, 2f/2b = 16/84, 2g/2b = 0/100, 2h/2b = 46/54), indicating a lowering of reactivity of the lone pair on the bismuth atom. Pd-Catalyzed degradation of 2a-g and their difluorides 3 giving biaryls 4 was promoted by the electron-withdrawing p-substituents in the equatorial aryl groups but suppressed by the more electronegative fluorine atoms in the apical positions. This is in fairly good accord with the stability of the trigonal bipyramidal geometry. The ¹³C NMR study of 1-3 showed that the signals due to the ipso carbons (C1) attached to the bismuth atom shift downfield with increasing electron-withdrawing nature of the p-substituents. No such tendency was observed in other aromatic ring carbons. The electronic effect on the C1 atoms, similar to that on the chlorination of 1 and degradation of 2 and 3, indicates the significant participation of the C1 atoms in these reactions through the Bi-C1 bonds.     

New mercury(II) and silver(I) complexes containing NHC metallacrown ethers with the π-π stacking interactions

The oligoether-linked bis-benzimidazolium salt 1,1′-[1,2-ethanediylbis(oxy-1,2-ethanediyl)]bis[(3-^secbutyl)benzimidazolium-1-yl]iodide (H₂L¹ · I₂), 1,1′-[1,2-ethanediylbis(oxy-1,2-ethanediyl)]bis[(3-ethyl)benzimidazolium-1-yl]iodide (H₂L² · I₂) and 1,1′-[1,2-ethanediylbis(oxy-1,2-ethanediyl)]bis[(3-^secbutyl)benzimidazolium-1-yl]hexafluorophosphate (H₂L¹ · (PF₆)₂) and their three new mercury(II) and silver(I) complexes containing NHC metallacrown ethers, HgL¹ · (Hg₂ · I₆) (1), HgL² · I₂ (2) and AgL¹ · PF₆ (3) were prepared and characterized. In the packing diagrams of H₂L² · I₂, 1, 2 and 3 benzimidazole ring head-to-tail π-π stacking interactions are observed.     

Reactivity and electrochemical behavior of ruthenium dithiolene complexes with coordinatively unsaturated metal centers: cycloaddition and dimerization reactions

The novel ruthenium dithiolene complexes [(arene)Ru{S₂C₂(COOMe)₂}] (arene = C₆H₆ (1a), C₆H₄(Me)(iPr) (1b), C₆Me₆ (1c)) were synthesized. The equilibrium between complex 1a and the corresponding dimer [(C₆H₆)Ru{S₂C₂(COOMe)₂}]₂ (1a′) was confirmed in solution. The reaction of complex 1a with dimethyl- or diethylacetylene dicaboxylate gave the alkene-bridged adducts [(C₆H₆)Ru{S₂C₂(COOMe)₂}{C₂(COOR)₂}] (R = Me (2a), Et (3a)) as [2 + 2] cycloaddition products formally. The reactions of complex 1a with diazo compounds also gave the alkylidene-bridged adducts [(C₆H₆)Ru{S₂C₂(COOMe)₂}(CHR)] (R = H (4a), SiMe₃ (5a), COOEt (6a)) as [2 + 1] cycloaddition products. The electrochemical behavior of complex 1a was investigated. The reductant of complex 1a was a stable species for several minutes. The oxidant of complex 1a was very unstable; the cation 1a⁺ formed was immediately converted to the corresponding cationic dimer 1a′⁺. The cationic dimer 1a′⁺ was stable for several minutes, and it was rapidly and quantitatively converted to the neutral complex 1a when it was reduced.     

Palladium and half sandwich ruthenium(II) complexes of selenated and tellurated benzotriazoles: Synthesis, structural aspects and catalytic applications

1-(Phenylselenomethyl)-1H-benzotriazole (L¹) and 1-(4-methoxyphenyltelluromethyl)-1H-benzotriazole (L²) have been synthesized by reacting 1-(chloromethyl)-1H-benzotriazole with in situ generated nucleophiles PhSe⁻ and ArTe⁻, respectively. The complexes of L¹ and L² with Pd(II) and Ru(II)(η⁶-p-cymene) have been synthesized. Proton, carbon-13, Se-77 and/or Te-125 NMR spectra authenticate both the ligands and their complexes. The single crystal structures of L¹, L² and [RuCl(η⁶-p-cymene)(L)][PF₆] (L = L¹: 3, L = L²: 4) have been solved. The Ru-Se and Ru-Te bond lengths have been found 2.4801(11) and 2.6183(10) Å, respectively. The palladium complexes, [PdCl₂(L)] (L = L¹: 1, L = L²: 2) have been explored for Heck and Suzuki-Miyaura C-C coupling reactions. The TON values are upto 95,000. The Ru-complexes have been found promising for catalytic oxidation of alcohols (TON ∼ 7.8-9.4 × 10⁴). The complexes of telluroether ligands are as efficient catalysts as those of selenoether ones and in fact better for catalytic oxidation.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.