Design of an optical temporal integrator based on a phase-shifted fiber Bragg grating in transmission

We present a theoretical study of a new application of a simple pi-phase-shifted fiber Bragg grating (PSFBG) in transmission mode as a high-speed optical temporal integrator. The PSFBG consists of two concatenated identical uniform FBGs with a pi phase shift between them. When the reflectivities of the FBGs are extremely close to 100%, the transmissive PSFBG can perform the time integral of the complex envelope of an arbitrary input optical signal with high accuracy. As an example, the integrator is numerically shown to be able to convert an input Gaussian pulse into an optical step signal.     

Broadband fiber Bragg gratings for dispersion management

This paper provides an overview and technology update of a dispersion management component made from chirped fiber Bragg gratings. The history and technology of fiber Bragg gratings (FBGs) have been extensively covered in several excellent review articles, [1-6] book chapters, [7] and books. [8,9] We give a brief overview of fiber Bragg grating technology in this section and then focus on the details concerned with construction and performance of dispersion management devices in optical communications systems with a single broadband long-length grating used in reflection. Sampled chirped grating are sometimes referred to as broadband devices, but they actually have a narrow bandwidth of operation that is periodically repeated across a given spectral range. Although these periodic devices have shown promise as dispersion management devices in communications systems, they will not be discussed in this paper.     

Inscription of high contrast volume Bragg gratings in fused silica with femtosecond laser pulses

We present volume Bragg gratings (VBGs) with a period of 1.075 μm inscribed in fused silica using a femtosecond laser and a phase mask. The femtosecond-inscribed VBGs can be used as reflecting elements with reflectivities of about 80% for a 1-mm-long grating. Due to the non-sinusoidal refractive-index shape, higher order Bragg resonances up to the 7th reflection order could be measured. Therefore, the Bragg gratings also reflect light in the visible-wavelength range.     

中心波长1080 nm的高功率光纤光栅研制与测试

介绍了基于紫外光侧写和相位掩模法制作双包层光纤光栅的工艺,制作了一对中心波长1080 nm的光纤光栅,测试光谱得到其反射谱带宽分别为2 nm和1 nm。采用自制的光纤光栅搭建了一个高功率光纤振荡器,得到最高502 W的激光输出,并测试了输出激光的光谱和光束质量。     

Yb3+-doped double-clad fiber laser with all fiber cavity

A novel all fiber cavity Yb3+-doped double-clad fiber laser (DCFL) based on two double-clad fiber (DCF)Bragg grating is presented. The fiber Bragg gratings (FBGs) as the input and output mirrors have been formed in Yb3+-doped DCF with the phase-mask method, and their reflectivities are 99% and 22%,respectively. When the input pump power is 417 mW, the maximum output power is 144 mW with linewidth ＜0.1 nm at the wavelength of 1.057μm, over 40-dB signal-to-noise ratio (SNR), and 50.8% slope efficiency.     

Time-resolved photoacoustic spectroscopy using fiber Bragg grating acoustic transducers

An acoustic transducer based on a fiber Bragg grating (FBG) is presented and characterized for use in time-resolved laser-induced photoacoustic spectroscopy (PAS) on solid samples. The photoacoustic wave was generated by pulsed laser excitation of immobilized carbon black or erbium oxide powder, and detected by recording either the transmission or reflection spectrum of a clamped fiber Bragg grating (FBG). The characterization of the FBGs photoacoustic response is based on the experimental comparison with a static lateral strain source and on theoretical analysis using the piecewise-uniform approach to photoelastic theory. The temporal resolution of the response is determined by the arrangement of the FBG with respect to the source of the acoustic wave and is better than 150 ns, as was verified in a deconvolution analysis.The method has not only a fast time response but also is simple, inexpensive, and accurate as indicated by the good agreement of the experimental photoacoustic spectrum with previous measurements.     

A linearity interrogation technique with enlarged dynamic range for fiber Bragg grating sensing

An exact linearity interrogation technique with enlarged dynamic range for fiber Bragg grating (FBG) sensor has been analyzed theoretically and demonstrated experimentally. The technique bases on two matched FBGs for receiving the reflected signal from the sensor FBG and two photodiodes (PDs) for collecting the reflected signal from the two receiver FBGs. The linear expression between the nature logarithm of the output ratio of the two PDs and Bragg wavelength of the sensor FBG is obtained on the condition that the bandwidths of the two receiver FBGs being equal to each other. The wavelength of the sensor FBG can be interrogated simply and accurately by the linearity technique according to the expression. In addition, a new tunable paralleled matched gratings interrogation scheme is proposed. The interrogation range can be enlarged and multiple FBG sensors can be interrogated simultaneously with the tunable interrogation scheme.     

Tunable Bragg gratings for fiber lasers

A tuning method of a fiber Bragg grating by the bending compression-tension is considered. With this method, a relative tuning range of the resonance wavelength of the grating of about 5% has been obtained. The changes in the shape of the spectrum and in the grating reflectivity during the tuning process are studied. The reflectivity of the fiber Bragg grating has been found to considerably increase with increasing degree of compression. It is shown that such an increase is caused by compression-induced changes in the refractive index modulation amplitude in the grating. The fiber Bragg grating developed has been applied for tuning the radiation wavelength of an ytterbium fiber laser. The tuning range of the laser has been found to be 45 nm around the central wavelength 1080 nm.     

光纤光栅三维应力传感器的设计与实现

以光纤光栅为敏感元件,设计并实现了一种基于圆柱结构的三维应力传感器.该传感器由三个光纤布喇格光栅等角度粘贴在圆柱体探头而实现.对这种三维传感器应用材料力学理论进行了传感原理的推导与分析,并进行了任意方向上应力大小的传感测量实验.实验表明:这种传感器可以准确测量三维空间任意方向的应力大小及方向,测量线性度高;在0-5N的测量范围内,误差不超过±1.58%,分辨率为9.2×10－3N.     

Spectrum-profile-identification-based wavelength division multiplexing method for a fiber Bragg grating sensor

A new wavelength division multiplexing method for fiber Bragg grating(FBG) sensors based on spectrum profile identification is proposed. In this method, FBGs and tilted FBG(TFBG) sensors are cascaded in a single fiber in one sensing channel. The different spectrum profiles enable the cross-correlation method to demodulate the wavelength. Therefore, the different types of sensors can occupy the same central wavelength band. Using this method, the multiplexing capacity is optimized. Experiment results demonstrate the feasibility of this method and it is useful for applications where large numbers of FBGs are needed.     

Design of a high-speed optical dark-soliton detector using a phase-shifted waveguide Bragg grating in reflection

A theoretical study of a new application of a simple pi-phase-shifted waveguide Bragg grating (PSWBG) in reflection mode as a high-speed optical dark-soliton detector is presented. The PSWBG consists of two concatenated identical uniform waveguide Bragg gratings with a pi phase shift between them. The reflective PSWBG, with grating reflectivities equal to 0.9, a free spectral range of 1.91 THz, and a nonlinear phase response, can convert a 40 Gbit/s noisy dark-soliton signal into a high-quality 40 Gbit/s return-to-zero signal with a peak power level of approximately 17.5 dB greater than that by the existing Mach-Zehnder interferometer with free spectral range of 1.91 THz and a linear phase response.     

Optic sensors of high refractive-index responsivity and low thermal cross sensitivity that use fiber Bragg gratings of >80 degrees tilted structures

For the first time to the authors' knowledge, fiber Bragg gratings (FBGs) with >80 degrees tilted structures have been fabricated and characterized. Their performance in sensing temperature, strain, and the surrounding medium's refractive index was investigated. In comparison with normal FBGs and long-period gratings (LPGs), >80 degrees tilted FBGs exhibit significantly higher refractive-index responsivity and lower thermal cross sensitivity. When the grating sensor was used to detect changes in refractive index, a responsivity as high as 340 nm/refractive-index unit near an index of 1.33 was demonstrated, which is three times higher than that of conventional LPGs.     

Asymmetrically Apodized Linearly Chirped Fiber Bragg Gratings for Efficient Pulse Compression

Asymmetrically apodized linearly chirped fiber Bragg gratings (FBGs) are shown to have highly linearized time-delay response. In simulations of a five-stage, 5-cm grating-based dispersion compensation system, asymmetrically apodized FBGs are shown to give over 60% reduction in the energy scattered from the main pulse body, 16 ps?60 ps pulses propagated over 800 km, as compared to a symmetrically apodized grating of similar length, strength, and bandwidth.     

Proposed Power-Equalized EDFA Modules Using Fiber Bragg Gratings with Various Reflectivities

We proposed and experimentally demonstrated two power-equalized erbium-doped fiber amplifier (EDFA) modules using fiber Bragg gratings (FBGs) with various reflectivities for individual channels. The transmission type power-equalized EDFA module is low-cost for its simple design, while the reflection type power-equalized EDFA module can suppress most of the amplified spontaneous emission noise. Both consist of a bidirectional EDFA, a set of FBG chains with suitable reflectivities, and an optical isolator/optical circulator. They can find potential applications in wavelength division multiplexing lightwave transmission systems.     

光栅周期包含的Bragg层数对Bragg型凹面衍射光栅的影响

单个衍射光栅周期所包含的Bragg周期层数是连续Bragg齿型凹面衍射光栅的主要参数之一,该参数可改变光栅齿结构,对凹面衍射光栅的分辨力.自由光谱范围及衍射效率有重要影响.本文通过理论分析与仿真模拟,对比了4种不同层数的Bragg型凹面衍射光栅的特性参数.研究结果表明:在衍射光栅尺寸不变的情况下,改变单个光栅周期包含的Bragg周期层数不会显著提高器件主衍射级次的分辨力;单个光栅周期包含的Bragg周期层数与光栅可衍射的级次数成正相关.单周期层数的Bragg凹面衍射光栅的主衍射级次效率最高,其可衍射的级次数最少,且其他衍射级次分散的能量最少;增加单个光栅周期所包含的Bragg周期层数会降低主衍射级次的自由光谱范围.该研究对于设计低插损、高分辨率、宽工作波段的波分复用器或光栅光谱仪具有重要的指导意义.     

Spectrally scanned,repetitively pulsed erbium-doped fiber laser for spectral and temporal multiplexing of fiber Bragg grating sensors

An erbium-doped fiber laser that emits a series of spectrally scanned pulses is used to monitor an array of fiber Bragg grating (FBG) sensors. The cavity for this Fabry-Perot laser is formed by two spectrally selective reflectors: a rotating mirror-grating combination for scanning the reflectance peak wavelength and a fiber Fabry-Perot interferometer (FFPI) with a periodic reflectance spectrum. During a scan of the rotating mirror, the laser produces a set of Q-switched pulses over the 1522-1568-nm spectral range at each of the FFPI reflectance peak wavelengths. This laser is used to simultaneously demonstrate wavelength-division multiplexing of FBGs with reflectance peaks in different spectral regimes and time-division multiplexing of FBGs with overlapping spectra. The spectral location of the FBG peaks was determined to an accuracy of 1.4 pm.     

压力与温度双参量传感优化系统的研制

研究了一种基于管式弹性应变敏感元件的光纤光栅传感器结构。利用双光纤布拉格光栅(FBG)产生双反射峰．对压力和温度进行了同时区分测量。在压力为0～20MPa,温度为20～150℃的范围内,布拉格反射波长对应压力与温度的变化均呈现良好的线性响应特性,响应灵敏度分别为0．089nm／MPa和0．024nm／C^-。压力温度双参量系数矩阵的实验拟合值与理论计算值之差仅占理论计算值的1．8％。该方法与标准测量方法比较,压力的准确度为0．47％;温度的准确度为0．74％。该方法还较好地削减了压力与温度交叉敏感的影响,按压力与温度测量的最大量限计算,温度对压力交叉影响的误差仅为0．16％。     

A novel dual-wavelength fiber Bragg grating and its application in fiber ring laser

A novel method for fabricating dual-wavelength fiber Bragg gratings (FBGs) by using one phase mask is developed. The method is based on a double-exposure technique. Our technique lends itself to writing gratings with controllable reflectivity and separation of two Bragg wavelengths. A grating with two equal transmission peaks of 20.25 dB is obtained by this method and the separation of the two Bragg wavelengths is about 0.8 nm. With the grating, we demonstrate a dual-wavelength erbium-doped fiber ring laser whose interval of the two peaks is 0.8 nm. The laser's peak powers can get 3.1 mW above and have a good stability.