Shift of shock position for a class of nonlinear singularly perturbed problems

Thenonlinearsingularlyperturbedproblemisaveryattentiveobjectofstudyintheinternationalacademiccircles[1].Recently ,manyscholarsstudiedagreatdealofwork .Forexample,Boh啨[2 ],ButuzovandSmurov[3],O’Malley ,Jr.[4 ],Butuzov ,NefedovandSchneider[5 ]andKelley[6 ]andsoon .TheauthorconsideredaclassofsingularlyperturbednonlinearboundaryvalueproblemsfortheordinarydifferentialequationinRefs .[7～ 1 0 ] ,reactiondiffusionequationsinRefs.[1 1～ 1 3 ] ,singularlyperturbedproblemswithnonlocalboundarycond…     

海底管道铺设的力学分析

海底管道铺设是近海工程建设中的重要环节．由于铺管问题的控制方程具有较强的非线性,加之边界可动,所以问题的求解比较困难．本文采用奇异摄动法较好地解决了这一问题,并与有限元解作了比较．     

High order multiplication perturbation method for singular perturbation problems

This paper presents a high order multiplication perturbation method for sin- gularly perturbed two-point boundary value problems with the boundary layer at one end. By the theory of singular perturbations, the singularly perturbed two-point boundary value problems are first transformed into the singularly perturbed initial value problems. With the variable coefficient dimensional expanding, the non-homogeneous ordinary dif- ferential equations （ODEs） are transformed into the homogeneous ODEs, which are then solved by the high order multiplication perturbation method. Some linear and nonlinear numerical examples show that the proposed method has high precision.     

一类弱非线性振动问题的插值摄动解法

用插值摄动法［１］求解一类有阻尼的弱非线性振动问题。算例表明，当小参数很小时，本文结果和多尺度法的一级近似结果十分接近。当小参数不是很小时（即接近于强非线性振动时），本文结果，仍然相当准确，并优于多尺度法的一级近似结果。     

两点边值问题的一种精细求解方法

将求解域均匀离散,由状态参量在相邻结点间的精细积分关系式,确定一组代数方程;并将其写成矩阵形式,代入边界条件后,代数方程组的系数矩阵可化为块三对角形式。针对这一特性,给出了一种高效的递推消元算法。由于没有离散误差,该方法具有较高的精度,不仅适用于任意边界的常规两点边值问题,还适用于奇异摄动边值问题。数值算例充分证明了本文方法的精度和效率。     

Asymptotic solution of nonlocal nonlinear reaction-diffusion Robin problems with two parameters

In this paper, the nonlocal nonlinear reaction-diffusion singularly perturbed problems with two parameters are studied. Using a singular perturbation method, the structure of the solutions to the problem is discussed in relation to two small parameters. The asymptotic solutions of the problem are given.     

Lie group analysis for thermophoretic and radiative augmentation of heat and mass transfer in a Brinkman-Darcy flow over a flat surface with heat generation

A boundary layer analysis is presented to investigate numerically the effects of radiation,thermophoresis and the dimensionless heat generation or absorption on hydromagnetic flow with heat and mass transfer over a flat surface in a porous medium.The boundary layer equations are transformed to non-linear ordinary differential equations using scaling group of transformations and they are solved numerically by using the fourth order Runge-Kutta method with shooting technique for some values of physical parameters.Comparisons with previously published work are performed and the results are found to be in very good agreement.Many results are obtained and a representative set is displayed graphically to illustrate the influence of the various parameters on the dimensionless velocity,temperature and concentration profiles as well as the local skin-friction coefficient,wall heat transfer,particle deposition rate and wall thermophoretic deposition velocity.The results show that the magnetic field induces acceleration of the flow,rather than deceleration(as in classical magnetohydrodynamics(MHD) boundary layer flow) but to reduce temperature and increase concentration of particles in boundary layer.Also,there is a strong dependency of the concentration in the boundary layer on both the Schmidt number and mass transfer parameter.     

Thermal radiation effect on flow and heat transfer of unsteady MHD micropolar fluid over vertical heated nonisothermal stretching surface using group analysis

The aim of this paper is to study the thermal radiation effects on the flow and heat transfer of an unsteady magnetohydrodynamic (MHD) micropolar fluid over a vertical heated nonisothermal stretching surface in the presence of a strong nonuniform magnetic field. The symmetries of the governing partial differential equations are de- termined by the two-parameter group method. One of the resulting systems of reduced nonlinear ordinary differential equations are solved numerically by the Chebyshev spec- tral method. The effects of various parameters on the velocity, the angular velocity, and the temperature profiles as well as the skin-friction coefficient, the wall couple stress co- efficient, and the Nusselt number are studied.     

Homotopy analysis solution for micropolar fluid flow through porous channel with expanding or contracting walls of different permeabilities

The flow of a micropolar fluid through a porous channel with expanding or contracting walls of different permeabilities is investigated. Two cases are considered, in which opposing walls undergo either uniform or non-uniform motion. In the first case,the homotopy analysis method (HAM) is used. to obtain the expressions for the velocity and micro-rotation fields. Graphs are sketched for some parameters. The results show that the expansion ratio and the different permeabilities have important effects on the dynamic characteristics of the fluid. Following Xu's model, in the second case which is more general, the wall expansion ratio varies with time. Under this assumption, the governing equations are transformed into nonlinear partial differential equations that can also be solved analytically by the HAM. In the process, both algebraic and exponential models are considered to describe the evolution of α(t) from the initial state α0 to the final state α1. As a result, the time-dependent solutions are found to approach the steady state very rapidly. The results show that the time-dependent variation of the wall expansion ratio can be ignored because of its limited effects.     

Analytic solution to the micropolar-fluid flow through a semi-porous channel with an expanding or contracting wall

The flow of a micropolar fluid in a semi-porous channel with an expanding or contracting wall is investigated. The governing equations are reduced to ordinary ones by using similar transformations. To get the analytic solution to the problem, the homotopy analysis method （HAM） is employed to obtain the expressions for velocity fields. Graphs are sketched and discussed for various parameters, especially the effect of the expansion ratio on velocity and micro-rotation fields.     

On the Stokes entry flow into a semi-infinite circular cylindrical tube

The problem of Stokes entry flow into a semi-infinite circular cylindrical tube was studied in this paper. A new kind of series solutions was derived. Their evident difference from the solutions in References [1,2] is that the present solutions don ’t involve infinite integral. So they are favourable for calculation. We calculated an example by allocated method and obtained satisfied results.     

Homotopy analysis solutions for the asymmetric laminar flow in a porous channel with expanding or contracting walls

In this paper, the asymmetric laminar flow in a porous channel with expanding or contracting walls is investigated. The governing equations are reduced to ordinary ones by using suitable similar transformations. Homotopy analysis method (HAM) is employed to obtain the expres- sions for velocity fields. Graphs are sketched for values of parameters and associated dynamic characteristics, especially the expansion ratio, are analyzed in detail.     

Finite element computations of two-dimensional arterial flow in the presence of a transverse magnetic field

A finite element solution of the Navier-Stokes equations for steady flow under the magnetic effect through a double-branched two-dimensional section of a three-dimensional model of the canine aorta is discussed. The numerical scheme involves transforming the physical co-ordinates to a curvilinear boundary-fitted co-ordinate system. The shear stress at the wall is calculated for a Reynolds number of 1000 with the branch-to-main aortic flow rate ratio as a parameter. The results are compared with earlier works involving experimental data and found to be in reasonable qualitative agreement. The steady flow, shear stress and branch flow under the effect of a magnetic field have been discussed in detail.     

Laminar flow in a uniformly porous channel with an applied transverse magnetic field

Summary The flow of a viscous incompressible and electrically conducting fluid in a two-dimensional uniformly porous channel, having fluid sucked or injected with a constant velocity through its walls, is considered in the presence of a transverse magnetic field. A solution for small Reynolds number has been given by the authors in a previous paper. A solution valid for large suction Reynolds number and all values of Hartmann number is presented here and the resulting boundary layer is discussed. Also Yuan's solution for large negativeR is extened to include small values ofM ₂/R.Nomenclature x, y distances parallel and perpendicular to the channel walls - u, v velocity components inx, y directions - p pressure - density - U(0) entrance velocity atx=0 - V suction velocity at the wall - V velocity field - J current density - E electric field - H magnetic field - H ₀ applied magnetic field - electrical conductivity - _m magnetic permeability - 2h distance between the porous walls - kinematic viscosity - y/h - B _m H - B _{0 m}H₀ - R Vh/, Reynolds number - M _mH₀ h(/)^1/2, Hartmann number - M/R - a - b - z 1–     

Non-radial flow of an incompressible fluid of second grade in a contracting channel

The steady non-radial flow of an incompressible fluid of second grade in a contracting channel is studied. The dependence of the flow on the material parameters of the fluid and on the channel angle is investigated. A similarity transformation is introduced for the streamfunction which reduces the P.D.E. to a sequence of O.D.E.s. A series solution is employed to solve the problem.

---

Sommario Si studia il flusso stazionario non radiale di un fluido di secondo grado incomprimibile in un canale convergente, esaminandone la dipendenza dai parametri materiali del fluido e dall'angolo di apertura del canale. Si introduce una trasformazione di similitudine per la funzione di corrente che riduce l'equazione di moto ad una serie di equazioni differenziali ordinarie, risolte numericamente.

     

Heat transfer in laminar flow in a uniformly porous channel with an applied transverse magnetic field

Summary The steady laminar flow of an incompressible, viscous, and electrically conducting fluid between two parallel porous plates with equal permeability has been discussed by Terrill and Shrestha [6]. In this paper, using the solution of [6] for the velocity field, the heat transfer problems of (i) uniform wall temperature and (ii) uniform heat flux at wall are solved.For small suction Reynolds numbers we find that the Nusselt number, with increasing Reynolds number, increases for case (i) and decreases for (ii).Nomenclature stream function - 2h channel width - x, y distances measured parallel, perpendicular to the channel walls - U velocity of fluid in the x direction at x=0 - V constant velocity of suction at the wall - nondimensional distance, y/h - nondimensional distance, x/h - f() function defined in (1) - density - coefficient of kinematic viscosity - R suction Reynolds number, V h/ - Re channel Reynolds number, 4U h/ - B ₀ magnetic induction - electrical conductivity - M Hartmann number, B ₀ h(/)^1/2 - K constant defined in (3) - A constant defined in (5) - 4R/Re - q local heat flux per unit area at the wall - k thermal conductivity - T temperature of the fluid - X –1/ ln(1–) - C _p specific heat at constant pressure - j current density - Pr Prandtl number, C _p/k - P mass transfer Péclet number, R Pr - Pe mass transfer Péclet number, P/ - T ₀ temperature at x=0 - T _H() temperature in the fully developed region - T _h(X, ) temperature in the entrance region - Y _n () eigenfunctions, uniform wall temperature - _n eigenvalues - e() function defined by (24) - B _n 2/3 _n ² - A _n constants defined by (28) - a _2m constants defined by (30) - F _n () eigenfunctions, uniform wall heat flux - a _n , b _n , c _n , d _n , e _n constants defined by (45) and (48) - S a parameter, U ²/q - h ₁ heat transfer coefficient - T _m mean temperature - Nu Nusselt number - Nu _T Nusselt number, uniform wall temperature - Nu _q Nusselt number, uniform wall heat flux     

Effects of induced magnetic field on peristaltic flow of Johnson-Segalman fluid in a vertical symmetric channel

In this paper, the influence of heat transfer and induced magnetic field on peristaltic flow of a Johnson-Segalman fluid is studied. The purpose of the present investigation is to study the effects of induced magnetic field on the peristaltic flow of non-Newtonian fluid. The two-dimensional equations of a Johnson-Segalman fluid are simplified by assuming a long wavelength and a low Reynolds number. The obtained equations are solved for the stream function, magnetic force function, and axial pressure gradient by using a regular perturbation method. The expressions for the pressure rise, temperature, induced magnetic field, pressure gradient, and stream function are sketched and interpreted for various embedded parameters.     

Exact solution to peristaltic transport of power-law fluid in asymmetric channel with compliant walls

Effects of compliant wall properties on the peristaltic flow of a non-Newtonian fluid in an asymmetric channel are investigated.The rheological characteristics are characterized by the constitutive equations of a power-law fluid.Long wavelength and low Reynolds number approximations are adopted in the presentation of mathematical developments.Exact solutions are established for the stream function and velocity.The streamlines pattern and trapping are given due attention.Salient features of the key parameters entering into the present flow are displayed and important conclusions are pointed out.