Type II photoinitiated self‐condensing vinyl polymerization for the preparation of hyperbranched polymers is explored using 2‐hydroxyethyl methacrylate (HEMA) or 2‐(dimethylamino)ethyl methacrylate (DMAEMA), and methyl methacrylate as hydrogen donating inimers and comonomer, respectively, in the presence of benzophenone and camphorquinone under UV and visible light. Upon irradiation at the corresponding wavelength, the excited photoinitiator abstracts hydrogen from HEMA or DMAEMA leading to the formation of initiating radicals. Depending on the concentration of inimers, type of the photoinitiator, and irradiation time, hyperbranched polymers with different branching densities and cross‐linked polymers are formed.
Synthesis of a cyclodextrin (CD) polyrotaxane is achieved for the first time by simultaneous free radical polymerization of isoprene, threading by CD, and stoppering by copolymerization of styrene. This reaction is performed in an eco‐friendly manner in an aqueous medium similar to classical emulsion polymerization. Threaded CD rings of the polyrotaxane are cross‐linked by hexamethylene diisocyanate, leading to highly elastic slide‐ring gels.
A self‐healing hydrogel is prepared by crosslinking acrylamide with a host–guest macro‐crosslinker assembled from poly(β‐cyclodextrin) nanogel and azobenzeneacrylamide. The photoisomerizable azobenzene moiety can change its binding affinity with β‐cyclodextrin, therefore the crosslinking density and rheology property of the hydrogel can be tuned with light stimulus. The hydrogel can repair its wound autonomously through the dynamic host–guest interaction. In addition, the wounded hydrogel will lose its ability of self‐healing when exposed to ultraviolet light, and the self‐healing behavior can be recovered upon the irradiation of visible light. The utilizing of host–guest macro‐crosslinking approach manifests the as‐prepared hydrogel reversible and light‐switchable self‐healing property, which would broaden the potential applications of self‐healing polymers.
A new class of thermoresponsive random polyurethanes is successfully synthesized and characterized. Poly(ethylene glycol) diol (Mn = 1500 Da) and 2,2‐dimethylolpropionic acid are reacted with isophorone diisocyanate in the presence of methane sulfonic acid catalyst. It is found that these polyurethanes are thermoresponsive in aqueous media and manifest a lower critical solution temperature (LCST) that can be easily tuned from 30 °C to 70 °C by increasing the poly(ethylene glycol) content. Their sharp LCST transitions make these random polyurethanes ideal candidates for stimuli‐responsive drug delivery applications. To that end, the ability of these systems to efficiently sequester doxorubicin (up to 36 wt%) by means of a sonication/dialysis method is successfully demonstrated. Additionally, it is also demonstrated that accelerated doxorubicin release kinetics from the nanoparticles can be attained above the LCST.
The synthesis of highly efficient two‐photon uncaging groups and their potential use in functional conjugated polymers for post‐polymerization modification are reported. Careful structural design of the employed nitrophenethyl caging groups allows to efficiently induce bond scission by a two‐photon process through a combination of exceptionally high two‐photon absorption cross‐sections and high reaction quantum yields. Furthermore, π‐conjugated polyfluorenes are functionalized with these photocleavable side groups and it is possible to alter their emission properties and solubility behavior by simple light irradiation. Cleavage of side groups leads to a turn‐on of the fluorescence while solubility of the π‐conjugated materials is drastically reduced.
A series of high‐efficiency, full‐color fluorescent elastomers based on polysiloxane matrix prepared by an easy thiol‐ene “click” reaction is reported here. It is found for the first time that the same elastomer can emit transformable colors by conveniently altering the excitation wavelength because of the effect of energy transfer and the “fluorescence switch” of lanthanide ions. A fluent change in emission colors can also be feasible and conveniently reproducible by varying the stoichiometric ratio of lanthanide ions and rhodamine‐B in solution and in polymer elastomers. The obtained elastomers are further coated onto commercially available UV‐LED cells from the solution medium followed by an in situ cross‐linking step.
Glycopolymers attached to a surface possess the ability to bind to certain carbohydrate binding proteins in a highly specific manner, and because of this, the fabrication of glycopolymer‐modified surfaces has evolved as an effective route toward bioresponsive systems. Poly(N‐3,4‐dihydroxybenzenethyl methacrylamide‐co‐2‐(methacrylamido) glucopyranose) copolymers, containing sugar and catechol functionalities, are for the first time successfully prepared in a well‐controlled manner via room temperature single‐electron transfer initiation and propagation through radical addition fragmentation chain transfer technique. The polymerization behavior is investigated and it presents controlled features with first‐order kinetics and linear relationships between molecular weights and monomer conversions. Moreover, the copolymers are used to modify different types of surfaces (silicon, steel, and plastic), the properties of the surfaces and the specific lectin‐binding abilities are investigated by a combination of water contact angle, Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectra, scanning electron microscopy with energy dispersive X‐ray (SEM/EDX), atomic force microscopy, and confocal microscope measurements.
Polyurethane (PU) monomer mixtures containing commercially available o‐nitrobenzyl‐based photocleavable monomers have been formulated and tested as low‐cost positive tone photoresists. The photolysis reaction is studied by UV spectroscopy. Well‐defined micropatterns on 2 μm thick photodegradable PU films are obtained using 365 nm light exposure. This strategy is also extended to improved formulations based on synthesized o‐nitrobiphenylpropyl derivatives with enhanced photochemical properties for single photon excitation and high two‐photon absorption cross‐sections. Improved pattern resolution in 2D and the capability of 3D resolution using a scanning laser at 780 nm is demonstrated. This work demonstrates the potential of PUs as readily available, versatile, and easy‐to‐use photoresist materials for low‐cost lithography applications.
In this study, a new type of functional, self‐assembled nanostructure formed from porphyrins and polyamidoamine dendrimers based on hydrogen bonding in an aqueous solution is presented. As the aggregates formed are promising candidates for solar‐energy conversion, their photocatalytic activity is tested using the model reaction of methyl viologen reduction. The self‐assembled structures show significantly increased activity as compared to unassociated porphyrins. Details of interaction forces driving the supramolecular structure formation and regulating catalytic efficiency are fundamentally discussed.
A simple strategy is provided to construct a novel pH‐ and sugar‐induced shape memory hydrogel based on dynamic phenylboronic acid (PBA)–diol interactions formed by PBA‐modified sodium alginate (Alg‐PBA) and poly(vinyl alcohol) (PVA). The dynamic PBA–diol ester bonds serve as temporary cross‐links and stabilize the deformed shape of the hydrogel. The disassociation of the PBA–diol ester bonds is explored in acidic conditions and aqueous solutions of glucose and fructose, which endow the hydrogel with shape memory performances.
This paper describes a method for fabricating protein‐based capsules with semipermeable and enzyme‐degradable surface barriers. It involves the use of a simple fluidic device to generate water‐in‐oil emulsion droplets, followed by cross‐linking of proteins at the water–oil interface to generate a semipermeable surface barrier. The capsules can be readily fabricated with uniform and controllable sizes and, more importantly, show selective permeability toward molecules with different molecular weights: small molecules like fluorescein sodium salt can freely diffuse through the surface barrier while macromolecules such as proteins can not. The proteins, however, can be released by digesting the surface barrier with an enzyme such as pepsin. Taken together, the capsules hold great potential for applications in controlled release, in particular, for the delivery of protein drugs.
Thermoresponsive linear polymers and their corresponding aggregates or nanogels typically show similar thermoresponsive profiles. In this study, the authors demonstrate reversible chemical switching between linear polymers and their cross‐linked nanogels. The linear polymers exhibit sharp thermal transitions typical of common thermoresponsive polymers but the cross‐linked nanogels exhibit “linear” thermal transitions over a relatively broad temperature range. The reversible switching between these two different polymer architectures with distinct thermoresponses represents a unique example of how the responsive properties of smart polymers can be significantly manipulated via polymer architecture engineering.
Recent studies have shown that polymersomes templated by microfluidic double‐emulsion possess several advantages such as high monodispersity and encapsulation efficiency compared with those generated based on thin‐film rehydration and electroformation. Stabilizers, including bovine serum albumin (BSA) and polyvinyl alcohol (PVA), have been used to enhance the formation and stability of double emulsions that are used as templates for the generation of polymersomes. In this work, the effect of stabilizers on the mechanical response of double‐emulsion‐templated polymersomes using micropipette aspiration is investigated. It is demonstrated that the existence of stabilizers results in the inelastic response in polymersomes in the early stage of solvent removal. However, aged polymersomes that have little residual solvent show elastic behavior. Polymersomes prepared from PVA‐stabilized double emulsions have noticeably lower area expansion moduli than polymersomes prepared from stabilizer‐free and BSA‐stabilized double emulsions, suggesting that PVA is incorporated in the bilayer membrane of polymersomes.
1,5,7‐Triazabicyclo[4.4.0]dec‐5‐ene (TBD)‐catalyzed polycondensation reactions of fatty acid derived dimethyl dicarbamates and diols are introduced as a versatile, non‐isocyanate route to renewable polyurethanes. The key step for the synthesis of dimethyl carbamate monomers from plant‐oil‐derived dicarboxylic acids is based on a sustainable base‐catalyzed Lossen rearrangement. The formed polyurethanes with molecular weights up to 25 kDa are characterized by SEC, DSC, and NMR analysis.
By anchoring alkynylplatinum(II) terpyridine molecular tweezer/pyrene recognition motif on the chain‐ends of telechelic polycaprolactone, high‐molecular‐weight supramolecular polymers have been successfully constructed via noncovalent chain extension, which demonstrate fascinating rheological and thermal properties. Moreover, the resulting assemblies exhibit interesting temperature‐ and solvent‐responsive behaviors, which are promising for the development of adaptive functional materials.
A novel method, epoxidation/reduction of vegetable oils, is developed to prepare bio‐based polyols for the manufacture of polyurethanes (PUs). These polyols are synthesized from castor oil (CO), epoxidized soybean oil, and epoxidized linseed oil and their molecular structures are characterized. They are used to prepare a variety of PUs, and their thermomechanical properties are compared to those of PU made with petroleum‐based polyol (P‐450). It is shown that PUs made with polyols from soybean and linseed oil exhibit higher glass transition temperatures, tensile strength, and Young's modulus and PU made with polyol from CO exhibits higher elongation at break and toughness than PU made with P‐450. However, PU made with P‐450 displays better thermal resistance because of tri‐ester structure and terminal functional groups. The method provides a versatile way to prepare bio‐polyols from vegetable oils, and it is expected to partially or completely replace petroleum‐based polyols in PUs manufacture.
Reactive oxygen, nitrogen, and sulfur species (RONSS) are cross‐reacting and involved in a myriad of physiological and pathological processes. Similar to acidic pH, overexpressed enzymes, and other specific stimuli found in pathological microenvironments, RONSS are recognized as a category of emerging triggering events and have been employed to design activatable theranostic nanomaterials. In this regard, a plethora of RONSS‐responsive nanovectors including polymeric micelles and vesicles (also referred to as polymersomes) are constructed. In comparison with micelles, polymersomes comprising aqueous interiors enclosed by hydrophobic membranes show intriguing applications in synergistic delivery of both hydrophobic and hydrophilic drugs, nanoreactors, and artificial organelles. This feature article focuses on the recent developments in the fabrication of RONSS‐responsive polymersomes and their potential biomedical applications in terms of triggered drug delivery.
The controlled synthesis of poly(oligo(2‐ethyl‐2‐oxazoline)methacrylate) (P(OEtOxMA)) polymers by Cu(0)‐mediated polymerization in water/methanol mixtures is reported. Utilizing an acetal protected aldehyde initiator for the polymerization, well‐defined polymers are synthesized (>99% conversion, Ð < 1.25) with subsequent postpolymerization deprotection resulting in α‐aldehyde end group containing comb polymers. These P(OEtOxMA) are subsequently site‐specifically conjugated, via reductive amination, to a dipeptide (NH2‐Gly‐Tyr‐COOH) as a model peptide, prior to conjugation to the functional peptide oxytocin. The resulting oxytocin conjugates are evaluated in comparison to poly(oligo(ethylene glycol) methyl ether methacrylate) combs synthesized in the same manner for potential effects on thermal stability in comparison to the native peptide.
The application of cyclodextrin (CD)‐based host–guest interactions towards the fabrication of functional supramolecular assemblies and hydrogels is of particular interest in the field of biomedicine. However, as of late they have found new applications as advanced functional materials (e.g., actuators and self‐healing materials), which have renewed interest across a wide range of fields. Advanced supramolecular materials synthesized using this noncovalent interaction, exhibit specificity and reversibility, which can be used to impart reversible cross‐linking, specific binding sites, and functionality. In this review, various functional CD‐based supramolecular assemblies and hydrogels will be outlined with the focus on recent advances. In addition, an outlook will be provided on the direction of this rapidly developing field.
A chemically cross‐linked but remarkably (re)processable shape‐memory polymer (SMP) is designed by cross‐linking poly(ε‐caprolactone) (PCL) stars via the efficient triazolinedione click chemistry, based on the very fast and reversible Alder–ene reaction of 1,2,4‐triazoline‐3,5‐dione (TAD) with indole compounds. Typically, a six‐arm star‐shaped PCL functionalized by indole moieties at the chain ends is melt‐blended with a bisfunctional TAD, directly resulting in a cross‐linked PCL‐based SMP without the need of post‐curing treatment. As demonstrated by the stress relaxation measurement, the labile character of the TAD–indole adducts under stress allows for the solid‐state plasticity reprocessing of the permanent shape at will by compression molding of the raw cross‐linked material, while keeping excellent shape‐memory properties.
