In this study, a new type of functional, self‐assembled nanostructure formed from porphyrins and polyamidoamine dendrimers based on hydrogen bonding in an aqueous solution is presented. As the aggregates formed are promising candidates for solar‐energy conversion, their photocatalytic activity is tested using the model reaction of methyl viologen reduction. The self‐assembled structures show significantly increased activity as compared to unassociated porphyrins. Details of interaction forces driving the supramolecular structure formation and regulating catalytic efficiency are fundamentally discussed.
The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.
The self‐assembly of nanostructured globular protein arrays in thin films is demonstrated using protein–polymer block copolymers based on a model protein mCherry and the polymer poly(oligoethylene glycol acrylate) (POEGA). Conjugates are flow coated into thin films on a poly(ethylene oxide) grafted Si surface, forming self‐assembled cylindrical nanostructures with POEGA domains selectively segregating to the air–film interface. Long‐range order and preferential arrangement of parallel cylinders templated by selective surfaces are demonstrated by controlling relative humidity. Long‐range order increases with coating speed when the film thicknesses are kept constant, due to reduced nucleation per unit area of drying film. Fluorescence emission spectra of mCherry in films prepared at <25% relative humidity shows a small shift suggesting that proteins are more perturbed at low humidity than high humidity or the solution state.
A linear supramolecular polymer based on the self‐assembly of an easily available copillar[5]arene monomer is efficiently prepared, which is evidenced by the NMR spectroscopy, viscosity measurement, and DOSY experiment. The single‐crystal X‐ray analysis reveals that the polymerization of the AB‐type monomer is driven by the quadruple CH•••π interactions and one CH•••O interaction.
A novel and non‐cytotoxic self‐healing supramolecular elastomer (SE) is synthesized with small‐molecular biological acids by hydrogen‐bonding interactions. The synthesized SEs behave as rubber at room temperature without additional plasticizers or crosslinkers, which is attributed to the phase‐separated structure. The SE material exhibits outstanding self‐healing capability at room temperature and essential non‐cytotoxicity, which makes it a potential candidate for biomedical applications.
The directed self‐assembly of gold nanoparticles through the crystallization of surface‐grafted polyethylene oxide (PEO) in ethanol–water mixtures is described. This process is fully reversible and tunable through either the size of the core or the polymeric coating. Characterization by X‐ray scattering and electron microscopy of the self‐assembled structures reveals order at the nanoscale, typically not the case for thermoresponsive gold nanoparticles coated with lower or upper critical solution temperature polymers. A further novelty is the result of selective binding of calcium ions to the PEO in the fluid state: a reversible thermoresponsive transition become irreversible.
The host–guest complexation between a porphyrin‐based 3D tetragonal prism ( H ) and electron‐rich pyrene is investigated. This host–guest molecular recognition is further utilized to suppress the liquid‐crystalline behavior of a nematic molecule ( G ) containing cyanobiphenyl mesogens functionalized with a pyrenyl unit. Furthermore, coronene, with an increased number of π‐electrons, is used as a competitive guest to recover the liquid‐crystalline behavior of G . This supramolecular approach provides a glimpse of the new possibilities to modulate the structures of the mesophases.
Nanotubes have attracted considerable attention due to their unique 1D hollow structure; however, the fabrication of pure nanotubes via block copolymer self‐assembly remains a challenge. In this work, the successful preparation of core–shell–corona (CSC) nanotubular micelles with uniform diameter and high aspect ratio is reported, which is achieved via self‐assembly of a poly (styrene‐b‐4‐vinyl pyridine‐b‐ethylene oxide) triblock terpolymer in binary organic solvents with assistance of solution thermal annealing. Via direct visualization of trapped intermediates, the nanotube is believed to be formed via large sphere—large solid cylinderical aggregates—nanotube transformations, wherein the unique solid to hollow transition accompanied with the unidirectional growth is distinct from conventional pathway. In addition, by virtue of the CSC structure, gold nanoparticles are able to be selectively incorporated into different micellar domains of the nanotubes, which may have potential applications in nanoscience and nanotechnology.
Polymerization‐induced self‐assembly (PISA) is an extremely versatile method for the in situ preparation of soft‐matter nanoparticles of defined size and morphologies at high concentrations, suitable for large‐scale production. Recently, certain PISA‐prepared nanoparticles have been shown to exhibit reversible polymorphism (“shape‐shifting”), typically between micellar, worm‐like, and vesicular phases (order–order transitions), in response to external stimuli including temperature, pH, electrolytes, and chemical modification. This review summarises the literature to date and describes molecular requirements for the design of stimulus‐responsive nano‐objects. Reversible pH‐responsive behavior is rationalised in terms of increased solvation of reversibly ionized groups. Temperature‐triggered order–order transitions, conversely, do not rely on inherently thermo‐responsive polymers, but are explained based on interfacial LCST or UCST behavior that affects the volume fractions of the core and stabilizer blocks. Irreversible morphology transitions, on the other hand, can result from chemical post‐modification of reactive PISA‐made particles. Emerging applications and future research directions of this “smart” nanoparticle behavior are reviewed.
A convenient and water‐based approach is described for the synthesis of an l ‐lysine‐based zwitterionic polymer, poly(ε−l ‐lysinyl acrylamide) (PLAM), without using protecting group chemistry, chromatographic purifications, and organic solvents as the reaction media. PLAM contains both amine and carboxylic acid groups in each repeating unit, which can either be protonated or deprotonated just by altering the pH of the solution to obtain overall positive or negative charge. PLAM is tested for its applicability as a zwitterionic polymeric buffer in water. Cu(II) ion‐induced aggregation of PLAM as a function of solution pH is studied. Spherical nanogel aggregates are formed at pH 9.5 due to aggregation of PLAM through its complexation with Cu(II) ion. Spherical aggregates appear to dissociate via breaking of the complexation at a pH < 5.5 resulting in molecular dissolution of PLAM. This aggregation process is pH reversible. The Cu(II)–PLAM aggregates are used as a template for fabrication of CuO and CuS nanoparticles.
This work demonstrates a new reactive and functional hybrid (S‐MMA‐POSS) of polyhedral oligomeric silsesquioxane (POSS) and sulfur prepared with a direct reaction between a multifunctional methacrylated POSS compound (MMA‐POSS) and elemental sulfur (S8) through the “inverse vulcanization” process. S‐MMA‐POSS is an effective building block for imparting self‐healing ability to the corresponding thermally crosslinked POSS‐containing nanocomposites through a self‐curing reaction and co‐curing reaction with conventional thermosetting resins. Moreover, S‐MMA‐POSS is also a useful precursor for preparation of materials with high transparency in mid‐infrared region.
A triblock copolymer containing the complementary hydrogen bonding recognition pair ureidoguanosine–diaminonaphthyridine (UG–DAN) as pendant functional groups is synthesized using ring‐opening metathesis polymerization (ROMP). The norbornene‐based DAN monomer is shown to allow for a controlled polymerization when polymerized in the presence of a modified‐UG molecule that serves as a protecting group, subsequently allowing for the fabrication of functionalized triblock copolymers. The self‐assembly of the copolymers was characterized using dynamic light scattering and 1H NMR spectroscopy. It is demonstrated that the polymers self‐assemble via complementary hydrogen bonding motifs even at low dilutions, indicating intramolecular interactions.
Self‐assembly of protein–polymer block copolymers is an attractive route for preparing biocatalytic materials. To clarify the effect of bioconjugate shape on self‐assembly without changing the chemical details of either block, four different conjugation sites are selected on the surface of the model globular protein mCherry at residues 3, 108, 131, and 222 to alter the colloidal shape of the bioconjugate. All four mCherry‐b‐poly(N‐isopropylacrylamide) bioconjugates show qualitatively similar phase diagrams, indicating that self‐assembly is robust with respect to changes in conjugation site. However, protein orientation has an effect on the location of the order–disorder transition concentration, and the stability of the disordered micellar phase is shown to be different for each conjugate. Differences in domain spacing also suggest changes in protein orientation within the lamellae.
Hierarchical self‐assembly of transient composite hydrogels is demonstrated through a two‐step, orthogonal strategy using nanoparticle tectons interconnected through metal–ligand coordination complexes. The resulting materials are highly tunable with moduli and viscosities spanning many orders of magnitude, and show promising self‐healing properties, while maintaining complete optical transparency.
Self‐healing hydrogels have been studied by many researchers via multiple cross‐linking approaches including physical and chemical interactions. It is an interesting project in multifunctional hydrogel exploration that a water soluble polymer matrix is cross‐linked by combining the ionic coordination and the multiple hydrogen bonds to fabricate self‐healing hydrogels with injectable property. This study introduces a general procedure of preparing the hydrogels (termed gelatin‐UPy‐Fe) cross‐linked by both ionic coordination of Fe3+ and carboxyl group from the gelatin and the quadruple hydrogen bonding interaction from the ureido‐pyrimidinone (UPy) dimers. The gelatin‐UPy‐Fe hydrogels possess an excellent self‐healing property. The effects of the ionic coordination of Fe3+ and quadruple hydrogen bonding of UPy on the formation and mechanical behavior of the prepared hydrogels are investigated. In vitro drug release of the gelatin‐UPy‐Fe hydrogels is also observed, giving an intriguing glimpse into possible biological applications.
The chemical control of cell division has attracted much attention in the areas of single cell‐based biology and high‐throughput screening platforms. A mussel‐inspired cytocompatible encapsulation method for achieving a “cell‐division control” with cross‐linked layer‐by‐layer (LbL) shells is developed. Catechol‐grafted polyethyleneimine and hyaluronic acid are chosen as polyelectrolytes for the LbL process, and the cross‐linking of polyelectrolytes is performed at pH 8.5. Cell division is controlled by the number of the LbL nanolayers and cross‐linking reaction. We also suggest a new measuring unit, , for quantifying “cell‐division timing” based on microbial growth kinetics.
Surface‐initiated photo‐induced copper‐mediated radical polymerization is employed to graft a wide range of polyacrylate brushes from silicon substrates at extremely low catalyst concentrations. This is the first time that the controlled nature of the reported process is demonstrated via block copolymer formation and re‐initiation experiments. In addition to unmatched copper catalyst concentrations in the range of few ppb, film thicknesses up to almost 1 μm are achieved within only 1 h.
The combination of dendritic and linear polymeric structures in the same macromolecule opens up new possibilities for the design of block copolymers and for applications of functional polymers that have self‐assembly properties. There are three main strategies for the synthesis of linear‐dendritic block copolymers (LDBCs) and, in particular, the emergence of click chemistry has made the coupling of preformed blocks one of the most efficient ways of obtaining libraries of LDBCs. In these materials, the periphery of the dendron can be precisely functionalised to obtain functional LDBCs with self‐assembly properties of interest in different technological areas. The incorporation of stimuli‐responsive moieties gives rise to smart materials that are generally processed as self‐assemblies of amphiphilic LDBCs with a morphology that can be controlled by an external stimulus. Particular emphasis is placed on light‐responsive LDBCs. Furthermore, a brief review of the biomedical or materials science applications of LDBCs is presented.
Developing simple methods to organize nanoscale building blocks into ordered superstructures is a crucial step toward the practical development of nanotechnology. Bottom‐up nanotechnology using self‐assembly bridges the molecular and macroscopic, and can provide unique material properties, different from the isotropic characteristics of common substances. In this study, a new class of supramolecular hydrogels comprising 40 nm thick linear polymer layers sandwiched between nanolayers of self‐assembled amphiphilic molecules are prepared and studied by nuclear magnetic resonance spectroscopy, scanning electronic microscopy, small angle X‐ray diffraction, and rheometry. The amphiphilic molecules spontaneously self‐assemble into bilayer membranes when they are in liquid‐crystal state. The hydrogen bonds at the interface of the nanolayers and linear polymers serve as junctions to stabilize the network. These hydrogels with layered structure are facile to prepare, mechanically stable, and with unique temperature‐dependent optical transparency, which makes it interesting in applications, such as soft biological membranes, drug release, and optical filters.
The modulation of the cloud point of aqueous poly(N,N‐diethylacrylamide) solutions via the formation of supramolecular cyclodextrin complexes with hydrophobic end groups, namely adamantyl, tert‐butyl phenyl and azobenzene, synthesized via RAFT polymerization is described. The dependence of the apparent cloud points after cyclodextrin complexation is investigated with respect to the type and quantity of the guest end group, the polymer chain length and the cyclodextrin/end group ratio. Furthermore, the effect is reversed via the addition of guest molecules or via biocompatible enzymatic degradation of the cyclodextrins entire.
