Iron‐mediated atom transfer radical polymerization (ATRP) has gained extensive attention because of the superiority of iron catalysts, such as low toxicity, abundant reserves, and good biocompatibility. Herein, a practical iron catalyst recycling system, photoinduced iron‐based water‐induced phase separable catalysis ATRP with initiators for continuous activator regeneration, at room temperature is developed for the first time. In this polymerization system, the polymerization is conducted in homogenous solvents consisting of p‐xylene and ethanol, using commercially available 5,10,15,20‐tetraphenyl‐21H,23H‐porphine iron(III) chloride as the iron catalyst, ethyl 2‐bromophenylacetate as the ATRP initiator, 2,4,6‐trimethylbenzoyl diphenylphosphine oxide as the photoinitiator, and poly(ethylene glycol) methyl ether methacrylate as the model hydrophilic monomer. After polymerization, a certain amount of water is added to induce the phase separation so that the catalyst can be separated and recycled in p‐xylene phase with very low residual metal complexes (<12 ppm) in the resultant polymers even after six times recycle experiments.
It is well known that the recently developed photoinduced metal‐free atom transfer radical polymerization (ATRP) has been considered as a promising methodology to completely eliminate transition metal residue in polymers. However, a serious problem needs to be improved, namely, large amount of organic photocatalysts should be used to keep the controllability over molecular weights and molecular weight distributions. In this work, a novel photocatalyst 1,2,3,5‐tetrakis(carbazol‐9‐yl)‐4,6‐dicyanobenzene (4CzIPN) with strong excited state reduction potential is successfully used to mediate a metal‐free ATRP of methyl methacrylate just with parts per million (ppm) level usage under irradiation of blue light emitting diode at room temperature, using ethyl α‐bromophenyl‐acetate as a typical initiator with high initiator efficiency. The polymerization kinetic study, multiple controlled “on–off” light switching cycle regulation, and chain extension experiment confirm the “living”/controlled features of this promising photoinduced metal‐free ATRP system with good molecular weight control in the presence of ppm level photocatalyst 4CzIPN.
Electrochemically‐mediated atom transfer radical polymerization (eATRP) of oligo(ethylene oxide) methyl ether methacrylate in water is investigated on glassy carbon, Au, Ti, Ni, NiCr and SS304. eATRPs are performed both in divided and undivided electrochemical cells operating under either potentiostatic or galvanostatic mode. The reaction is fast, reaching high conversions in ≈4 h, and yields polymers with dispersity <1.2 and molecular weights close to the theoretical values. Most importantly, eATRP in a highly simplified setup (undivided cell under galvanostatic mode) with inexpensive nonnoble metals, such as NiCr and SS304, as cathode is well‐controlled. Additionally, these electrodes neither release harmful ions in solution nor react directly with the C X chain end and can be reused several times. It is demonstrated that Pt can be replaced with cheaper, and more readily available materials without negatively affecting eATRP performance.
This work demonstrates a new halogenation reaction through sequential radical and halogen transfer reactions, named as “radical and atom transfer halogenation” (RATH). Both benzoxazine compounds and poly(2,6‐dimethyl‐1,4‐phenylene oxide) have been demonstrated as active species for RATH. Consequently, the halogenated compound becomes an active initiator of atom transfer radical polymerization. Combination of RATH and sequential ATRP provides an convenient and effective approach to prepare reactive and crosslinkable polymers. The RATH reaction opens a new window both to chemical synthesis and molecular design and preparation of polymeric materials.
In a recent publication, Nakamura and co‐workers studied the termination mechanism in the radical polymerization of acrylates. Contrary to conventional thinking, their conclusion is that termination is overwhelmingly by disproportionation. This finding impacts on a large body of the previous work in the polymerization of acrylic monomers which this work seeks to address. Analysis of the molecular weight distribution of acrylic polymers obtained under different polymerization conditions shows that termination by combination is the more probable mechanism for mutual termination of secondary radicals. It is proposed that in the experiments conducted by Nakamura and co‐workers, backbiting plays a key role and their experimental data are reinterpreted, showing that they are more revealing with respect to the mode of termination of the midchain radical produced by backbiting, than to bimolecular termination of secondary radicals.
How to simply and efficiently separate and recycle catalyst has still been a constraint for the wide application of atom transfer radical polymerization (ATRP), especially for the polymerization systems with hydrophilic monomers because the polar functional groups may coordinate with transition metal salts, resulting in abundant catalyst residual in the resultant water‐soluble polymers. In order to overcome this problem, a latent‐biphasic system is developed, which can be successfully used for ATRP catalyst separation and recycling in situ for various kinds of hydrophilic monomers for the first time, such as poly(ethylene glycol) monomethyl ether methacrylate (PEGMA), 2‐hydroxyethyl methacrylate (HEMA), 2‐(dimethylamino)ethyl methacrylate (DMAEMA), N,N‐dimethyl acrylamide (DMA), and N‐isopropylacrylamide (NIPAM). Herein, random copolymer of octadecyl acrylate (OA), MA‐Ln (2‐(bis(pyridin‐2‐ylmethyl)amino)ethyl acrylate), and POA‐ran‐P(MA‐Ln) is designed as the macroligand, and heptane/ethanol is selected as the biphasic solvent. Copper(II) bromide (CuBr2) is employed as the catalyst, PEG‐bound 2‐bromo‐2‐methylpropanoate (PEG350‐Br) as the water‐soluble ATRP initiator and 2,2′‐azobis(isobutyronitrile) (AIBN) as the azo‐initiator to establish an ICAR (initiators for continuous activator regeneration) ATRP system. Importantly, well‐defined water‐soluble polymers are obtained even though the recyclable catalyst is used for sixth times.
Surface‐initiated photo‐induced copper‐mediated radical polymerization is employed to graft a wide range of polyacrylate brushes from silicon substrates at extremely low catalyst concentrations. This is the first time that the controlled nature of the reported process is demonstrated via block copolymer formation and re‐initiation experiments. In addition to unmatched copper catalyst concentrations in the range of few ppb, film thicknesses up to almost 1 μm are achieved within only 1 h.
Polymers bearing activated aziridine groups are attractive precursors to α‐substituted‐β‐amino‐functionalized materials due to the enhanced reactivity of the pendant aziridine functionalities toward ring‐opening by nucleophiles. Two aziridine‐containing styrenic monomers, 2‐(4‐vinylphenyl)aziridine (VPA) and N‐mesyl‐2‐(4‐vinylphenyl)aziridine (NMVPA), were polymerized under a variety of reversible deactivation radical polymerization conditions. Low‐catalyst‐concentration atom transfer radical polymerization (LCC‐ATRP) and reversible addition‐fragmentation chain‐transfer (RAFT) polymerization were ineffective at producing well‐defined polymers from VPA due to side reactions between the aziridine functionalities and the agents controlling the polymerizations (catalysts or chain transfer agents). PolyVPA produced under nitroxide‐mediated polymerization (NMP) conditions had narrow molecular weight distribution at low to moderate conversions of monomer, but branched and eventually cross‐linked polymers were formed at higher conversions due to ring‐opening reactions of the aziridine groups. Most of these undesirable side reactions were eliminated by attaching a methanesulfonyl (mesyl) group to the aziridine nitrogen atom, and well‐defined linear homopolymers with targeted molecular weights were realized from NMVPA under RAFT and NMP conditions; however, side reactions between the aziridine groups and the catalyst in LCC‐ATRP still occured and the polymerization was uncontrolled using this technique.
Atom transfer radical polymerization (ATRP) catalyzed by high oxidation state metal salts of FeX3 is developed for the first time in the absence of both external initiator and reducing agent. Methyl methacrylate (MMA) and styrene are polymerized successfully using FeX3/Phosphorous ligands with well‐controlled molecular weight distributions (=1.5). The molecular weight of the polymers increases with monomer consumption with the progress of time and the polymerization behaviors show a decent ATRP trend. Activators and initiators are suggested to generate in situ by the addition reaction of MMA and one equivalent of FeX3. The PMMA synthesized from without‐initiator system is characterized by 1H, 13C and DEPT (distortionless enhancement by polarization transfer nuclear magnetic resonance) nuclear magnetic resonance spectroscopy. Chain extension and copolymerization experiments prove the livingness of the obtained polymer.
Photoinduced initiators for continuous activator regeneration atom transfer radical polymerization (ATRP) of hydrophilic monomers in heptane/ethanol latent‐biphasic system for copper catalyst separation and recycling have been realized for the first time at room temperature with different wavelengths of visible light LED (green, blue, purple, and white LED) as external stimulus, using 2‐bromophenylacetate as the ATRP initiator and camphorquinone/triethylamine as the photoinitiator. In this system, hybrid catalyst complex (HCc) is synthesized as a novel nonpolar catalyst, which is preferentially dissolved in heptane. The hydrophilic polymers obtained catalyzed by HCc in heptane/ethanol mixture solvent show typical “living” features, for example, the values of Mn,GPC increase linearly with monomer conversion up to quantitative level (>96%) and the molecular weight distributions were kept narrow (Mw/Mn < 1.20) throughout the polymerization process. It should be noted that the excellent controllability of this novel polymerization system can be achieved even after 5 catalyst recycling experiments under LED irradiation.
Poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA)‐based brush poly(phosphoamidate)s are successfully synthesized by a combination of ring‐opening metathesis polymerization (ROMP) and atom transfer radical polymerization (ATRP) following either a commutative two‐step procedure or a straightforward one‐pot process using Grubbs ruthenium‐based catalysts for tandem catalysis. Compared with the traditional polymerization method, combining ROMP and ATRP in a one‐pot process allows the preparation of brush copolymers characterized by a relatively moderate molecular weight distribution and quantitative conversion of monomer. Moreover, the surface morphologies and aggregation behaviors of these polymers are studied by AFM and TEM measurements.
In the last decades, metallopolymers have received great attention due to their various applications in the fields of materials and chemistry. In this article, a neutral 18‐electron exo‐substituted η4‐cyclopentadiene CpCo(I) unit‐containing polymer is prepared in a controlled/“living” fashion by combining facile click chemistry and ring‐opening metathesis polymerization (ROMP). This Co(I)‐containing polymer is further used as a heterogeneous macromolecular catalyst for atom transfer radical polymerization (ATRP) of methyl methacrylate and styrene.
A concept based on diffusion‐regulated phase‐transfer catalysis (DRPTC) in an aqueous‐organic biphasic system with copper‐mediated initiators for continuous activator regeneration is successfully developed for atom transfer radical polymerization (ICAR ATRP) (termed DRPTC‐based ICAR ATRP here), using methyl methacrylate (MMA) as a model monomer, ethyl α‐bromophenylacetate (EBrPA) as an initiator, and tris(2‐pyridylmethyl)amine (TPMA) as a ligand. In this system, the monomer and initiating species in toluene (organic phase) and the catalyst complexes in water (aqueous phase) are simply mixed under stirring at room temperature. The trace catalyst complexes transfer into the organic phase via diffusion to trigger ICAR ATRP of MMA with ppm level catalyst content once the system is heated to the polymerization temperature (75 °C). It is found that well‐defined PMMA with controlled molecular weights and narrow molecular weight distributions can be obtained easily. Furthermore, the polymerization can be conducted in the presence of limited amounts of air without using tedious degassed procedures. After cooling to room temperature, the upper organic phase is decanted and the lower aqueous phase is reused for another 10 recycling turnovers with ultra low loss of catalyst and ligand loading. At the same time, all the recycled catalyst complexes retain nearly perfect catalytic activity and controllability, indicating a facile and economical strategy for catalyst removal and recycling.
The termination mechanism of the radical polymerization of acrylates, namely the selectivity of disproportionation (Disp) and combination (Comb) between polymer end radicals, is unambiguously determined by the reaction of polyacrylate end radicals generated from corresponding “living” organotellurium ω‐end polymer. While textbooks describe the occurrence of Comb, the reaction at 25 °C exclusively gives the Disp products. Ab initio molecular dynamics suggests that the products form by two pathways: The direct disproportionation reaction and a novel stepwise process that involves the initial formation of the C–O coupling product followed by intramolecular rearrangement. The termination at high temperature and low radical concentration increases the contribution of back‐biting reaction giving mid‐chain radicals, and complex reaction pathways of the mid‐chain radicals are clarified for the first time.
Imitating the natural “energy cascade” architecture, we present a single‐molecular rod‐like nano‐light harvester (NLH) based on a cylindrical polymer brush. Block copolymer side chains carrying (9,9‐diethylfluoren‐2‐yl)methyl methacrylate units as light absorbing antennae (energy donors) are tethered to a linear polymer backbone containing 9‐anthracenemethyl methacrylate units as emitting groups (energy acceptors). These NLHs exhibit very efficient energy absorption and transfer. Moreover, we manipulate the energy transfer by tuning the donor–acceptor distance.
Various approaches to latent polymerization processes are described. In order to highlight recent advances in this field, the discussion is subdivided into chapters dedicated to diverse classes of polymers, namely polyurethanes, polyamides, polyesters, polyacrylates, epoxy resins, and metathesis‐derived polymers. The described latent initiating systems encompass metal‐containing as well as purely organic compounds that are activated by external triggers such as light, heat, or mechanical force. Special emphasis is put on the different chemical venues that can be taken to achieve true latency, which include masked N‐heterocyclic carbenes, latent metathesis catalysts, and photolatent radical initiators, among others. Scientific challenges and the advantageous application of latent polymerization processes are discussed.
Cross‐linked azobenzene liquid‐crystalline polymer films with a poly(oxyethylene) backbone are synthesized by photoinitiated cationic copolymerization. Azobenzene moieties in the film surface toward the light source are simultaneously photoaligned during photopolymerization with unpolarized 436 nm light and thus form a splayed alignment in the whole film. The prepared films show reversible photoinduced bending behavior with opposite bending directions when different surfaces of one film face to ultraviolet light irradiation.
In this work, the synthesis of various halogenated thiophenol derivatives is presented. These thiophenols are used as monomers in light‐initiated SRN1‐type radical polymerization reactions. The method provides easy access to industrially relevant poly(paraphenylene sulfide) and poly(metaphenylene sulfide). The influence of the halide leaving group and of other substituents in the thiophenol monomer on the polymerization process is investigated.
Synthesis of hydroxy‐functionalized cyclic olefin copolymer (COC) is achieved with remarkably high activity (up to 5.96 × 107 g‐polymer mol‐Ti−1 h−1) and controlled hydroxy group in a wide range (≈17.1 mol%) by using ansa‐dimethylsilylene (fluorenyl)(amido)titanium complex. The catalyst also promotes living/controlled copolymerization to afford novel diblock copolymers consisting of hydroxy‐functionalized COC and semicrystalline polyolefin sequence such as polyethylene and syndiotactic polypropylene, where the glass transition temperature of the norbornene/10‐undecen‐1‐ol segment and each block length are controlled by comonomer composition and copolymerization time, respectively.
The successful chain‐growth copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization employing Cu(0)/pentamethyldiethylenetriamine (PMDETA) and alkyl halide as catalyst is first investigated by a combination of nuclear magnetic resonance, gel‐permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. In addition, the electron transfer mediated “click‐radical” concurrent polymerization utilizing Cu(0)/PMDETA as catalyst is successfully employed to generate well‐defined copolymers, where controlled CuAAC polymerization of clickable ester monomer is progressed in the main chain acting as the polymer backbone, the controlled radical polymerization (CRP) of acrylic monomer is carried out in the side chain. Furthermore, it is found that there is strong collaborative effect and compatibility between CRP and CuAAC polymerization to improve the controllability.
