An alkyne‐functionalized ruthenium(II) bis‐terpyridine complex is directly copolymerized with phenylacetylene by alkyne polymerization. The polymer is characterized by size‐exclusion chromatography (SEC), 1H NMR spectroscopy, cyclic voltammetry (CV) measurements, and thermal analysis. The photophysical properties of the polymer are studied by UV–vis absorption spectroscopy. In addition, spectro‐electrochemical measurements are carried out. Time‐resolved luminescence lifetime decay curves show an enhanced lifetime of the metal complex attached to the conjugated polymer backbone compared with the Ru(tpy)22+ model complex.
This article reports a rational strategy for preparing smart oligo(ethylene glycol)‐based hybrid microgels loaded with high content of homogeneously distributed preformed magnetic nanoparticles (NPs) (up to 33 wt%). The strategy is based on the synthesis of biocompatible multiresponsive microgels by precipitation copolymerization of di(ethylene glycol) methyl ether methacrylate, oligo(ethylene glycol) methyl ether methacrylate, methacrylic acid, and oligo(ethylene glycol)diacrylate. An aqueous dispersion of preformed magnetic NPs is straightforwardly loaded into the microgels. Robust monodisperse thermoresponsive magnetic microgels are produced, exhibiting a constant value of the volume phase transition temperature whatever the NPs content. The homogeneous microstructure of the initial stimuli‐responsive biocompatible microgels plays a crucial role for the design of unique well‐defined ethylene glycol‐based thermoresponsive hybrid microgels.
The combination of dendritic and linear polymeric structures in the same macromolecule opens up new possibilities for the design of block copolymers and for applications of functional polymers that have self‐assembly properties. There are three main strategies for the synthesis of linear‐dendritic block copolymers (LDBCs) and, in particular, the emergence of click chemistry has made the coupling of preformed blocks one of the most efficient ways of obtaining libraries of LDBCs. In these materials, the periphery of the dendron can be precisely functionalised to obtain functional LDBCs with self‐assembly properties of interest in different technological areas. The incorporation of stimuli‐responsive moieties gives rise to smart materials that are generally processed as self‐assemblies of amphiphilic LDBCs with a morphology that can be controlled by an external stimulus. Particular emphasis is placed on light‐responsive LDBCs. Furthermore, a brief review of the biomedical or materials science applications of LDBCs is presented.
Development of novel photoluminescent hydrogels with toughness, biocompatibility, and antibiosis is important for the applications in biomedical field. Herein, novel tough photoluminescent lanthanide (Ln)‐alginate/poly(vinyl alcohol) (PVA) hydrogels with the properties of biocompatibility and antibiosis have been facilely synthesized by introducing hydrogen bonds and coordination bonds into the interpenetrating networks of Na‐alginate and PVA, via approaches of frozen‐thawing and ion‐exchanging. The resultant hydrogels exhibit high mechanical strength (0.6 MPa tensile strength, 5.0 tensile strain, 6.0 MPa compressive strength, and 900 kJ m−3 energy dissipation under 400% stretch), good photoluminescence as well as biocompatibility and antibacterial activity. The design strategy provides a new avenue for the fabrication of multifunctional photoluminescent hydrogels based on biocompatible polymers.
A simplified one‐pot and less harmful method has been introduced for the synthesis of borinic acid monomer. The corresponding borinic acid polymer (PBA) has been prepared by reversible addition‐fragmentation chain transfer polymerization. Property investigations confirm the characteristics of PBA as a new type of “smart material” in the field of thermo‐responsive polymer. The potential application of PBA in the field of enzymatic biofuel cell has been illustrated with a wide open circuit potential of 0.92 V.
Electrohydrodynamic cojetting has been employed to synthesize compartmentalized microfibers from thermally responsive hydrogels. The synthesis of the hydrogels as well as their transformation into compartmentalized microcylinders is discussed. After programmable shape‐shifting, snail‐like particles are obtained that undergo functional and structural reconfiguration in response to a change in temperature.
Endowing unimolecular soft nanoobjects with biomimetic functions is attracting significant interest in the emerging field of single‐chain technology. Inspired by the compartmentalized structure and polymerase activity of metalloenzymes, copper‐containing compact nanoglobules have been designed, synthesized, and characterized endowed with metalloenzyme mimicking characteristics toward controlled synthesis of water‐soluble polymers and thermoresponsive hydrogels. When compared to metalloenzymes, artificial nanoobjects endowed with metalloenzyme mimicking characteristics offer increased stability against thermal changes and reduced degradability by hydrolytic enzymes.
Metal‐containing polymer hydrogels have attracted increasing interest in recent years due to their outstanding properties such as biocompatibility, recoverability, self‐healing, and/or redox activity. In this short review, methods for the preparation of metal‐containing polymer hydrogels are introduced and an overview of these hydrogels with various functionalities is given. It is hoped that this short update can stimulate innovative ideas to promote the research of metal‐containing hydrogels in the communities.
Messenger ribonucleic acids (mRNAs) are considered as promising alternatives for transient gene therapy, but to overcome their poor pharmacokinetic properties, smart carriers are required for cellular uptake and stimuli‐responsive release. In this work, a synthetic concept toward reductive decationizable cationic block copolymers for mRNA complexation is introduced. By combination of RAFT block copolymerization with postpolymerization modification, cationic block copolymers are generated with disulfide‐linked primary amines. They allow effective polyplex formation with negatively charged mRNA and subsequent release under reductive conditions of the cytoplasm. In first in vitro experiments with fibroblasts and macrophages, tailor‐made block copolymers mediate cell‐specific mRNA transfection, as quantified by polyplex uptake and mRNA‐encoding gene expression. Furthermore, RAFT polymerization provides access to heterotelechelic polymers with orthogonally addressable endgroup functionalities utilized to ligate targeting units onto the polyplex‐forming block copolymers. The results exemplify the broad versatility of this reductive decationizable mRNA carrier system, especially toward further advanced mRNA delivery applications.
This study reports a simple and versatile synthesis route for the preparation of highly uniform and densely functionalized aqueous microgels by modification of latex particles composed of an active ester monomer (pentafluorophenyl acrylate; PFPA). The hydrophobic nature of the PFPA allows synthesizing very uniform latex particles via emulsion polymerization, whose size can be controlled by the surfactant concentration, while the degree of crosslinking is a function of the added crosslinker. The high reactivity of the PFPA groups toward nucleophilic substitution delivers a platform method to synthesize functional microgels by reaction with functional amines. This study demonstrates this process for the dense functionalization of the entire particle with an amine carrying a pH‐responsive unit. This study further describes the influence of the crosslinking degree on the ability for swelling of the resulting microgels in aqueous dispersion.
Using the third‐generation Grubbs catalyst, the living ring‐opening metathesis polymerization of ferrocene/cobalticenium copolymers is conducted with theoretical numbers of 25 monomer units for each block, and their redox and electrochemical properties allow using the Bard–Anson electrochemical method to determine the number of metallocenyl units in each block.
Binary polystyrene and poly(4‐vinylpyridine) mixed grafted silica nanoparticles (PSt/P4VP‐g‐SNPs) are fabricated using CuI‐catalyzed azide‐alkyne Huisgen cycloaddition (CuAAC) via grafting‐to method. Azide‐terminated PSt and P4VP are synthesized via post‐ and pre‐atom transfer radical polymerization modification, respectively. Then, the polymers are simultaneously anchored onto alkyne‐modified SNPs by CuAAC yielding mixed brushes as shown by Raman spectroscopy, dynamic light scattering, and thermogravimetric analysis. To the best of our knowledge, this is the first report of simultaneously grafting two distinct polymer chains to synthesize mixed grafted silica nanoparticles using CuAAC technique via grafting‐to method.
The dynamic covalent characteristics of oxime and boronate ester bonds have been explored. A small excess of a competing aldehyde under acidic conditions resulted in oxime polymer degradation from high molecular weights (30 kDa) to low molecular weight oligomers (2.2 kDa). The dynamic nature of oxime bonds imparts oxime cross‐linked hydrogels with self‐healing properties and the incorporation of phenyl boronic acid groups into the hydrogel network provides a platform for hydrogel functionalization. The addition of a polyphenol (tannic acid) proves a facile means to incorporate a second, dynamic covalent cross‐linking network through boronate ester formation which, owing to the increase in the degree of cross‐linking, is found to be nearly double the hydrogel strength (storage modulus increased from 4.6 to 8.5 kPa). Finally, the tannic acid cross‐linking network is selectively degraded returning the hydrogel storage modulus to its initial value and providing a means for the synthesis of materials with tunable mechanical properties.
Hierarchical self‐assembly of transient composite hydrogels is demonstrated through a two‐step, orthogonal strategy using nanoparticle tectons interconnected through metal–ligand coordination complexes. The resulting materials are highly tunable with moduli and viscosities spanning many orders of magnitude, and show promising self‐healing properties, while maintaining complete optical transparency.
The application of cyclodextrin (CD)‐based host–guest interactions towards the fabrication of functional supramolecular assemblies and hydrogels is of particular interest in the field of biomedicine. However, as of late they have found new applications as advanced functional materials (e.g., actuators and self‐healing materials), which have renewed interest across a wide range of fields. Advanced supramolecular materials synthesized using this noncovalent interaction, exhibit specificity and reversibility, which can be used to impart reversible cross‐linking, specific binding sites, and functionality. In this review, various functional CD‐based supramolecular assemblies and hydrogels will be outlined with the focus on recent advances. In addition, an outlook will be provided on the direction of this rapidly developing field.
By anchoring alkynylplatinum(II) terpyridine molecular tweezer/pyrene recognition motif on the chain‐ends of telechelic polycaprolactone, high‐molecular‐weight supramolecular polymers have been successfully constructed via noncovalent chain extension, which demonstrate fascinating rheological and thermal properties. Moreover, the resulting assemblies exhibit interesting temperature‐ and solvent‐responsive behaviors, which are promising for the development of adaptive functional materials.
Stimuli responsive surfaces that show reversible fluorescence switching behavior in response to temperature changes were fabricated. Oligo(ethylene glycol) methacrylate thermoresponsive polymers with amine end‐groups were prepared by atom transfer radical polymerization (ATRP). The polymers were patterned on silicon surfaces by electron beam (e‐beam) lithography, followed by conjugation of self‐quenching fluorophores. Fluorophore conjugated hydrogel thin films were bright when the gels were swollen; upon temperature‐induced collapse of the gels, self‐quenching of the fluorophores led to significant attenuation of fluorescence. Importantly, the fluorescence was regained when the temperature was cooled. The fluorescence switching behavior of the hydrogels for up to ten cycles was investigated and the swelling‐collapse was verified by atomic force microscopy. Morphing surfaces that change shape several times upon increase in temperature were obtained by patterning multiple stimuli responsive polymers.
In this study, mechanically strong hydrogels are synthesized by photopolymerization of 2‐vinyl‐4,6‐diamino‐1,3,5‐triazine, poly(ethylene glycol) methacrylate, and disulfide‐containing cross‐linker, N′N‐bis(acryloyl)cystamine. The bilayer hydrogel with distinct cross‐linking density is shown to self‐roll into a 3D tube, which could still be well reinforced by hydrogen bondings, upon exposing reductants such as 1,4‐dithio‐DL‐threitol (DTT) or L‐glutathione (GSH), because the redox‐induced cleavage of disulfide bonds results in the imbalanced internal shrinking stress between two layers. At an intracellular level of GSH, model L929 cells‐seeded bilayer gel sheet could curl up into a 3D tubular scaffold where the cells maintained good viability.
The thermosensitive graphene oxide (GO)/poly(N‐isopropyl acrylamide) (pNIPAM) composite hydrogels are prepared, and their tribological properties in response to external stimuli are evaluated. The frictional coefficient of the hydrogels is closely related to the gel composition and ambient temperature. When the gel is in swelling state below the low critical solution temperature (LCST), it shows ultra‐low friction and exhibits high friction at a shrunk state above the LCST. The huge difference of frictional coefficient under two states can be reversibly switched many times by altering the temperature. The incorporation of a nonthermal sensitive monomer into pNIPAM could change the LCST and thus the transformation point of frictional coefficient can be altered. These reversible and tunable frictional hydrogels have potential application in the design of intelligent control equipment.
The synthesis, tunable thermoresponsive properties, and self‐assembly of dual redox and thermoresponsive double hydrophilic block copolymers having pendant disulfide linkages (DHBCss) are reported. Well‐defined DHBCss composed of a hydrophilic poly(ethylene oxide) block and a dual thermo‐ and reduction‐responsive random copolymer block containing pendant disulfide linkages are synthesized by atom transfer radical polymerization. Their lower critical solution temperature (LCST) transitions are adjusted through modulating pendant hydrophobic–hydrophilic balance with disulfide–thiol–sulfide chemistry. Further, these DHBCss derivatives are converted to disulfide‐crosslinked nanogels at temperatures above LCST through temperature‐driven self‐assembly and in situ disulfide crosslinking. They exhibit enhanced colloidal stability and further reduction‐responsive degradability, thus demonstrating versatility of dual thermo‐ and reduction‐responsive smart materials.
