Thermal cis—trans isomerization of bis(diamine) cobalt(III) and chromium(III) complexes in a solid phase

Thermal cis—trans isomerization of the simple bis(diamine) complexes [MX₂(aa or bb)₂]X · HX · n H₂O and the mixed bis(diamine) complexes [MX₂(aa)(bb)]X · HX · n H₂O was investigated in a solid phase, where M = Co(III) or Cr(III) ion, X = Cl or Br, aa and bb are one of the diamines selected from ethylenediamine (en), d, l-1,2-propane-diamine (pn), d,l-2,3-butanediamine (dl-bn), d,l-1,2-cyclohexanediamine (chxn), 1,3-propanediamine (ln) and d,l-2,4-pentanediamine (ptn), and n = 0–2. The information obtained may be summarized as follows. (1) The features of isomerization are considerably dependent upon the kind of metal ions, halide ions and diamines contained in the complexes. (2) Trans-cis isomerization was identified in the simple bis(diamine) complexes containing en, pn, dl-bn or chxn which can form five-membered chelate rings with metal ions, whereas cis-trans isomerization was detected in the simple bis(diamine) complexes containing tn or ptn which forms six-membered rings; all the mixed bis(diamine) complexes isomerize from trans to cis even when they have a combination of five- and six-membered chelate rings. (3) The cobalt(III) complexes isomerize in a temperature range of dehydration and/or dehydrohalogenation with activation energies of about 100 kJ mole⁻¹, whereas the chromium(III) complexes usually isomerize in the anhydrous state and the activation energies amount to as much as 150–190 kJ mole⁻¹. (4) “Aquation-anation” and “bond rupture” were proposed for the isomerization of the cobalt(III) and the chromium(III) complexes, respectively.     

Crystal structure of Fe(η-C5H5BCMe3)2 a “problem structure”

The complex Fe(η⁶-C₅H₅CMe₃)₂ crystallizes in the centrosymmetric triclinic space group P (C_i¹; No. 2) with unit cell dimensions of a 8.770(1) Å, b 8.878(1) Å, c 11.991(1) Å, 107.56(1)°, β 90.85(1)°, γ 90.13(1)°, V 890.0(2) ų and Z = 2. A full sphere of data was collected on a four-circle diffractometer. The structure was solved and refined to R 7.93% for all 3155 independent reflections and R 4.98% for those 2002 data with | F₀ | > 6σ. | F₀ |. The molecules lie on crystallographic inversion centers at 0, 0, 0 and 1/2, 0, 1/2; the crystallographic asymmetric unit therefore consists of two independent half molecules. The molecule centered at 0, 0, 0 (molecule “A”) is ordered and well-defined; that centered on 1/2, 0, 1/2 (molecule “B”)is probably disordered, as indicated by larger “thermal parameters” and a greater range of apparent interatomic distances. Discussion em phasizes the geometry of molecule A, which has precise C_i symmetry with Fe(1A)-B(1A) 2.297(4) Å and Fe(1A)-C(ring) distances ranging from 2.057(6) Å to 2.138(4) Å.     

Asymmetric transfer hydrogenation of ferrocenyl ketones: a new simple route to chiral ferrocenyl alcohols

The asymmetric transfer hydrogenation (ATH) of ferrocenyl ketones, such as FcC(O)CH₂Y [Fc = ferrocenyl, Y = H (1a), CH₃ (1b), Cl (1c) or N₃ (1d)] has been carried out using the Noyori/Ikariya catalysts [(−)-(1R,2S)-ephedrine] or N-tosyl-(1R,2R)-diphenylethylenediamine [(R,R)-TsDPEN] as chiral ligands combined with [RuCl₂(η⁶-benzene)]₂ and 2-PrOH or HCO₂H–Et₃N as the hydrogen sources, respectively. The best results were achieved with the [(R,R)-TsDPEN–Ru^IIHCO₂H–Et₃N] catalytic system, which produced the ferrocenylalcohols (R)-2a, (R)-2c, and (R)-2d in good yields and excellent enantiomeric excesses (>98% ee).     

Syntheses of heparin - like pentamers containing “opened” uronic acid moieties

The syntheses of four analogues of pentasaccharide Ia, which corresponds to the minimal AT III binding region of heparin, are presented and the biological activities of these analogues will be discussed. Three of these analogues (i.e. compounds II, III and IV) contain an R-glyceric acid oxymethylene residue (i.e. B in fig.3) instead of -L-iduronic acid and in the other analogue (i.e. compound V) the β-D-glucuronic acid unit has been replaced by an s-glyceric acid oxymethylene residue (i.e. A in fig3). The R and S-glyceric acid oxymethylene residues represent an “opened” iduronic acid unit and an “opened” glucuronic acid unit, respectively, containing the essential carboxylate function in the appropriate configuration. The crucial step in the syntheses of these “opened” uronic acid pentamer analogues, was the preparation of the required glyceric acid oxymethylene residues 8a, 8b and 8c.

Analogues II and III, containing an “opened” iduronic acid moiety, display a significant AT III mediated Xa activity. Compound III contains two extra sulphate groups at unit 2. Removal of the contributing O-sulphate groups at position 3 and 6 of unit 6 of compound II (i.e. compound IV) results in a seven-fold drop in Xa activity. Replacement of the β-D-glucuronic acid unit by an S-glyceric acid oxymethylene residue (i.e. compound V) leads to almost a complete loss of Xa activity, notwithstanding the fact that all the essential and contributing charged groups are present in the molecule.     

Asymmetric Diels–Alder reactions in supercritical carbon dioxide catalyzed by rare earth complexes

The rare earth(III) salt catalysed asymmetric Diels–Alder reaction of cyclopentadiene with a chiral dienophile in supercritical carbon dioxide (scCO₂) proceeded rapidly to give the adduct with a higher diastereoselectivity than that in dichloromethane; Yb(ClO₄)₃ gave the endo adduct with value up to 77% de at 40°C, 8 MPa. The chiral rare earth diketonate catalyzed hetero Diels–Alder reaction of the Danishefsky's diene with benzaldehyde gave a higher yield and an enantioselectivity in scCO₂ than that in dichloromethane. Scandium/pybox 8a complex catalysed asymmetric Diels–Alder reaction of 3-crotonoyl-2-oxazolidinone with cyclopentadiene in the presence of MS4A proceeded smoothly in scCO₂ to give the endo adduct 10 in a good yield with up to 88% ee.     

cis,cis-Spiro[4.4]nonane-1,6-diol: A new chiral auxiliary for the asymmetric Diels-Alder reaction

The use of a mono-pivalate mono-acrylate bis-ester of (+)-1S,5S,6S-spiro[4.4]nonane-1,6-diol in an asymmetric Diels-Alder reaction with cyclopentadiene (2 equiv. BCl₃, −85°C, CH₂Cl₂) provided the expected endo bicyclo adduct in >97% de. Iodolactonization of the bicyclo adduct provided the (+)-lactone (5) with a 1S,4S,6S,8R,9S configuration (97% ee). The de's obtained from using various types and amounts of Lewis acids, and both chiral and racemic bis-esters in the Diels-Alder reaction with cyclopentadiene are also reported.     

Asymmetric hydroformylation with Pt-phosphine-SnCl2 and Pt-bisphosphine-CuCl2 (or CuCl) catalytic systems

A study has been made of asymmetric hydroformylation of styrene with PtCl₂(PPh₃)₂ + bisphosphine + SnCl₂ (bisphosphine: BDPP = (−)-(2S,4S)-2,4-bis(diphenylphosphino)pentane or DIOP = (−)-(4R,5R)-2,2-dimethyl-4,5-bis(diphenylphosphinomethyl)-1,3-dioxolane) and PtCl₂(bisphosphine) + PPh₃ + SnCl₂ catalysts prepared “in situ”. The presence of an excess of the phosphine ligand slightly lowered the reaction rate, but the enantioselectivity of these systems is significantly higher than those involving PtCl(SnCl₃)(bisphosphine) catalysts. Under mild reaction conditions 88.8% enantiomeric excess was achieved. Replacing SnCl₂ in these catalysts by CuCl₂ or CuCl gave a new homogeneous catalytic system which is active at higher reaction temperature (> 100°C), but has a rather moderate enantioselectivity.     

New cycloaddition reactions of 1-phenyl-4-vinylpyrazole

1-Phenyl-4-vinylpyrazole reacts with methyl propiolate and N-phenylmaleimide giving via the Diels-Alder 1:1 adducts, products (4) and (8), and also the 1:2 adducts (5), (6) and (9) resulting from an “ene” reaction of the initially forced cycloadducts. The obtention of the adducts (5) and (6) in equimolecular amounts is a good example of the non-regioselective character of the “ene” reaction. The reaction with tetracyanoethylene takes place through the olefinic substituent giving the π² + π² adduct (10).     

Synthesis and Diels-Alder reactions of homochiral 2-sulfinylmaleates with cyclopentadiene

Enantiomerically pure 2-p-tolylsulfinylmaleates 1, 2 and 3 have been readily prepared by Knoevenagel reaction between (S)-menthyl p-toluenesulfinate and glyoxylic acid. Their asymmetric Diels-Alder reactions with cyclopentadiene have been studied under a wide range of uncatalyzed and catalyzed conditions and the stereochemical results have been explained by assuming a steric control approach, in term of S-cis or S-trans favoured conformations. Uncatalyzed Diels-Alder reactions of 1 and some Lewis acid catalyzed Diels-Alder reactions of 2 show high facial and endo selectivities. The facial selectivity of dienophile 2 highly depends on the Lewis acid, whereas reactivity of 1 and 3 is very sensitive to the solvent. These sulfinylmaleates 1, 2 and 3 act as synthetic equivalents of chiral acetylenedicarboxylates in Diels-Alder reactions after basic elimination of the sulfinylic moiety in the resulting adducts.     

Optically active phenanthrolines in asymmetric catalysis. IV. Enantioselective hydrosilylation of acetophenone by rhodium/chiral alkyl phenanthroline catalysts.

The in situ catalysts prepared from [Rh(Cod)Cl]₂ (Cod = 1,5-cyclooctadiene) and chiral alkylphenanthroline ligands 1–6 display a remarkable activity in the asymmetric hydrosilylation of acetophenone affording, after hydrolysis, the expected 1-phenylethanol in high yield and complete selectivity. High enantioselectivities, up to 76%, were obtained in the presence of 2-substituted derivatives 5 and 6, whereas 3-alkylphenanthrolines 1–4 gave e.e.'s not higher than 6%. High chemical yields, but modest enantioselectivities (10–20% e.e.) were recorded with the potentially terdentate ligands 7–10. Chiral alkylphenanthrolines were poorly efficient ligands in the asymmetric Ni-catalysed cross-coupling of -methylbenzylmagnesium chloride with vinyl bromide.     

Spectres de rotation de la molécule de chlorobenzéne : I. Variétés isotopiques monosubstituées et structure rs

The microwave spectra of chlorobenzene “(1)-³⁵Cl”, all eight mono-[“(1)-³⁷Cl”, “(1)-³⁵Cl, (2)D”, “(1)-³⁵Cl, (3)D”, “(1)-³⁵Cl, (4)D”, “(1)-³⁵Cl, (1)-¹³C”, “(1)-³⁵Cl, (2)-¹³C”, “(1)-³⁵Cl, (3)-¹³C”, “(1)-³⁵Cl, (4)-¹³C”], one di[“(1)-³⁵Cl, (2,6)D₂,”] and one trisubstituted species [“(1)-³⁷Cl, (2,6)D₂”] have been investigated. From the moments of inertia of the vibrational ground state the r_s structure was derived. The reliability of the two small a coordinates could be enhanced through use of the multiply substituted species. The errors of the moments of inertia were propagated to the structural parameters. It could be shown that the benzene ring is deformed. However the quantitative deformation could not be established due to the rather large errors of some structural parameters.     

Chiral C2-symmetric 2,3-disubstituted aziridine and 2,6-disubstituted piperidine as chiral ligands in the addition reaction of diethylzinc with arylaldehydes

Chiral C₂-symmetric 2,3-disubstituted aziridines and 2,6-disubstituted piperidines having a β-amino alcohol moiety have been successfully synthesized and their catalytic chiral induction properties have been examined in the asymmetric addition reactions of diethylzinc with arylaldehydes in hexane. When N-(2,2-diphenyl-2-hydroxyethyl)-(S,S)-2,3-bis(methoxymethyl)aziridine 11 was used as a catalytic chiral ligand, sec-alcohols having (S)-configuration formed in high yields of 86–92% but low enantiomeric excesses (ee's) of 11–13%. However, when N-(2,2-diphenyl-2-hydroxyethyl)-(R,R)-2,6-disubstituted piperidine derivatives 16 and 20 were used as the chiral ligands under the same reaction conditions, the ee's of the corresponding sec-alcohols were 20–30 and 5–6%, respectively, along with the inversion of absolute configuration. A plausible mechanism for this inversion is proposed.     

Übergangsmetall—methylen-komplexe : XXXI. Primärkomplexierung von diazoalkanen an metall—metall-mehrfachbindungen; ein weiterer koordinationstyp

An unexpected novel coordination mode of diazoalkanes has been verified via addition of 2-diazopropane to the metal—metal triple bond of bis[dicarbonyl(η⁵-pentamethylcyclopentadienyl)molybdenum] (MoMo). The dinuclear 1:1 addition product isolated in nearly quantitative yield is structurally characterized by a bent, 4-electron type η¹:η²-diazoalkane ligand, with the terminal nitrogen atom symmetrically bridging the metal-metal “single bond” (d(MoMo) 305.0(2) pm; d(Mo---N(1)) 212.0(12) and 212.6(10) pm, respectively) and the second nitrogen atom being bonded to one molybdenum atom only (d(Mo---N(2)) 213.4(13) pm).     

Crystal structure of an epoxycembradienol, 3,15-epoxy-4-hydroxycembra-7(Z), 11(Z)-diene

The crystal structure of the title compound, C₂₀H₃₄O₂, has been determined by single crystal X-ray diffraction methods at 295 K from diffractometer data using direct methods and refined by least squares to a residual of 0.06 for 2152 “observed” reflections. Crystals are orthorhombic, P2₁2₁2₁, a = 32.770(8), b = 10.960(3), c = 10.850(3) Å, Z=8. The asymmetric unit comprises two independent molecules, both of which confirm the structure proposed in the preceding paper.     

Rhodium-catalyzed Reformatsky-type reaction for asymmetric synthesis of difluoro-β-lactams using menthyl group as a chiral auxiliary

We developed a new methodology for the asymmetric Reformatsky-type reaction of (−)-menthyl bromodifluoroacetate (2) with imine in the presence of RhCl(PPh₃)₃. Ester 2 with the cost-effective chiral auxiliary gave (S)-difluoro-β-lactams in moderate to good yields and high diastereoselectivities through spontaneous removal of the auxiliary.     

Dynamic behaviour and X-ray analysis of chiral η-allylpalladium complexes. II

The DANTE technique and NOESY two-dimensional method have been employed to observe the isomerization of the chiral cationic complex [Pd(η³-CH₂CMeCH₂(P-P′)]⁺ (1a), where P-P′ = the chiral chelating ligand (S)(N-diphenylphosphino)(2-diphenylphosphinoxymethyl)pyrrolidine. The rate constant was found to be 0.5 s⁻¹ in CHCl₃ at 295 K and 1.50 s⁻¹ in the presence of added free ligand. In the latter case the epimerization proceeds by a π-σ-π mechanism via the intermediacy of a primary η¹-allylpalladium complex. Although the intermediate was not detected, the NMR findings reveal that it has the allylic terminus η¹-bonded to palladium. The structure of 1a in its PF₆⁻ salt has been determined. The compound crystallizes in the orthorhombic space group P2₁2₁2₁ with a 10.029(4) b 19.203(8) c 36.115(6) Å, Z = 8, R = 0.0572 and R_w = 0.0712 for 3716 observed reflections with I > 3σ(I).     

Structural evolutions of the n-heneicosane and n-tricosane molecular alloys at 293 K

A structural study of odd-numbered n-alkane (C_n) binary mixtures (C₂₁ : C₂₃) was carried out on powder samples using a Guinier-de Wolff camera with increasing concentration of n-C₂₃ at 293 K.

Despite the reports in the literature, these molecular alloys do not form an orthorhombic continuous homogeneous solid solution to C₂₁ from C₂₃ at “low temperature”. Instead, as already observed in two even-numbered C_n systems, X-ray diffraction results show the existence of seven solid solutions as the molar concentration of C₂₃ increases: four terminal solid solutions, denoted β₀(C₂₁)β₀(C₂₃), isostructural with the “low temperature” phase of pure C₂₁ and C₂₃ (Pbcm), β′₀(C₂₁) and β′₀(C₂₃), identical to the phase β′₀ which appears in pure C₂₃ above the δ transition, and three orthorhombic intermediate solid solutions, designated β″₁, β′₁ and β″₂.

On the basis of powder X-ray photographs, the phases β″₁ and β″₂ (C₂₁ : C₂₃) are indistinguishable, and they are isostructural with the intermediate solid solution β″ of the even-numbered C_n binary systems (C₂₂ : C₂₄) and (C₂₄ : C₂₆). The phase β′₁(C₂₁ : C₂₃) is also isostructural with the two indistinguishable intermediate solid solutions β′₁ and β′₂ of the molecular alloys (C₂₂ : C₂₄) and (₂₄ : C₂₆).

From this study and our other laboratory results, the sequences of appearance of the solid solutions and the structural identities between these phases are established at “low temperature” for all the binary molecular alloys of consecutive C_n (odd-odd, even-even or odd-even: 19 < n < 27) when increasing the solute concentration.     

Stereoselective propene polymerization at a metallocene/alumoxane catalyst derived from the chirally-substituted “meso-like” (p-R,p-S)-bis[1-(neoisopinocamphyl)-4,5,6,7-tetrahydroindenyl]-zirconium dichloride

Isopinocamphyl-tosylate (2) was treated with indenyllithium to yield 3-(neoisopinocamphyl)-indene (3). Treatment of 3 with methyllithium gave 1-(neoisopinocamphyl)indenyllithium (4) which was then treated with 0.5 molar equivalents of ZrCl₄(thf)₂ to give a 52:48 mixture of one of the “racemic-like” isomers of bis[1-(neoisopinocamphyl)indenyl]ZrCl₂ (5A) and its “meso-like” diastereomer 5C. Hydrogenation of the 5A/5C mixture (50 bar H₂, Pt) furnished a mixture of the corresponding tetrahydroindenylzirconium complexes 6A and 6C, from which the “meso-like” bis[1-(neoisopinocamphyl)-4,5,6,7-tetrahydroindenyl]zirconium dichloride diastereoisomer (6C) was isolated. Treatment of 6C with an excess of methylalumoxane in toluene/propene generated an active -olefin polymerization catalyst. At −30°C partly isotactic polypropylene ( _η = 39000) was obtained. The catalyst derived from the chirally-substituted “meso-like” metallocene complex 6C produced polypropylene predominantly under enantiomorphic site control.     

AlPO-Catalysed asymmetric Diels-Alder reactions of cyclopentadiene with chiral acrylates

Reactions of cyclopentadiene with several chiral acrylates are studied and compared with the same reactions catalysed by Zn(II)-exchanged K10 montmorillonite. In general, amorphous AlPO₄ is a more efficient catalyst than the clay. In particular, the reaction of cyclopentadiene with (−)-8-phenylmenthyl acrylate leads to 74% diastereomeric excess (d.e.) in methylene chloride at low temperatures. This result constitutes the highest asymmetric induction described to date for a solid-catalysed asymmetric Diels-Alder reaction. When the reactions are carried out in the absence of a solvent a noticeable decrease in selectivity is observed, probably due to an extensive competition of the non-catalysed reaction.     

'Genome order index' should not be used for defining compositional constraints in nucleotide sequences

A “genome order index,” defined as S = a² + c² + t² + g², where a, c, t, and g are the nucleotide frequencies of A, C, T, and G, respectively, was used to suggest that there exist genome-specific constraints on nucleotide composition. We show that the “evidence” for constraint, S < 1/3, is in fact a mathematical property that is always true regardless of data. Moreover, we show that S is strictly equivalent to and derivable from the Shannon H-function and has no advantage over it.