Stress Degradation Studies on Tadalafil and Development of a Validated Stability-Indicating LC Assay for Bulk Drug and Pharmaceutical Dosage Form

A stability-indicating HPLC assay method was developed for the quantitative determination of tadalafil in bulk samples and in pharmaceutical dosage forms in the presence of the degradation products. It involved a 250 mm × 4.6 mm, 5 μm C-18 column. The gradient LC method employs solution A and B as mobile phase. Solution A contains a mixture of buffer (phosphate buffer and tetra-n-butyl ammonium hydrogen sulfate) pH 2.5: acetonitrile (80:20, v/v) and solution B contains a mixture of water: acetonitrile (20:80, v/v). The flow rate was 1.0 mL min⁻¹ and the detection wavelength was 220 nm. The retention time of tadalafil is about 17 min. Tadalafil was subjected to different ICH prescribed stress conditions. Degradation was found to occur in hydrolytic and to some extent in oxidative stress conditions, while the drug was stable to photolytic and thermal stress. The drug was particularly labile under alkaline hydrolytic conditions. The drug was subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. The assay of stress samples was calculated against a qualified reference standard and the mass balance was close to 99.5%. The developed RP-LC method was validated with respect to linearity, accuracy, precision and ruggedness.     

Identification, Isolation, and Characterization of Five Potential Degradation Impurities in Candesartan Cilexetil Tablets

Five impurities were observed when candesartan cilexetil tablets were subjected to stability and forced degradation studies. These impurities were successfully isolated and characterized as desethyl candesartan cilexetil, 1N-ethyl candesartan cilexetil, 2N-ethyl candesartan cilexetil, 1N-ethyl oxo candesartan cilexetil, and 2N-ethyl oxo candesartan cilexetil. A gradient reverse phase liquid chromatography (LC) and an isocratic preparative LC method were used to detect and isolate all five degradation products impurities simultaneously. Mass spectrometry, ¹H/¹³C, DEPT and 2D NMR experiments were extensively utilized to characterize these impurities. Even though desethyl candesartan cilexetil, 1N-ethyl candesartan cilexetil were 2N-ethyl candesartan cilexetil were documented in the literature as known impurities, the regioisomers 1N-ethyl oxo candesartan cilexetil and 2N-ethyl oxo candesartan cilexetil were never noticed. Single-crystal diffraction data has been used to confirm their structure unambiguously and synthetic preparations of all known and unknown impurities were also presented.     

Development of a New Analytical Method for Determination of Related Components in Nateglinide

An isocratic reverse phase liquid chromatographic (RP-LC) assay method has been developed for the quantitative determination of nateglinide and its related components namely imp-1 and imp-2 in bulk drug and in pharmaceutical dosage form, used for the treatment of type II diabetes mellitus. The developed method is stability indicating and also can be used for stability testing. The chromatographic separation was achieved on C-8, 150 × 4.6 mm, 3.5 μm stationary phase. The LC method employs solution A as mobile phase. Solution A contains a mixture of phosphate buffer pH 3.0: acetonitrile (50:50 v/v). The flow rate was 1.0 mL min⁻¹ and the detection wavelength was 210 nm. In the developed LC method the resolution between nateglinide and its potential impurities namely imp-1 and imp-2 was found to be greater than 5.0. The drug was subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. Considerable degradation was found to occur in acid medium, alkaline medium and oxidative stress conditions. The stress samples were assayed against a qualified reference standard and the mass balance was found close to 99.2%. The developed RP-LC method was validated with respect to linearity, accuracy, precision and robustness.     

Identification,Isolation, and Characterization of Five Potential Degradation Impurities in Candesartan Cilexetil Tablets

Five impurities were observed when candesartan cilexetil tablets were subjected to stability and forced degradation studies. These impurities were successfully isolated and characterized as desethyl candesartan cilexetil, 1N-ethyl candesartan cilexetil, 2N-ethyl candesartan cilexetil, 1N-ethyl oxo candesartan cilexetil, and 2N-ethyl oxo candesartan cilexetil. A gradient reverse phase liquid chromatography (LC) and an isocratic preparative LC method were used to detect and isolate all five degradation products impurities simultaneously. Mass spectrometry, ¹H/¹³C, DEPT and 2D NMR experiments were extensively utilized to characterize these impurities. Even though desethyl candesartan cilexetil, 1N-ethyl candesartan cilexetil were 2N-ethyl candesartan cilexetil were documented in the literature as known impurities, the regioisomers 1N-ethyl oxo candesartan cilexetil and 2N-ethyl oxo candesartan cilexetil were never noticed. Single-crystal diffraction data has been used to confirm their structure unambiguously and synthetic preparations of all known and unknown impurities were also presented.     

Determination of Candesartan Cilexetil in Tablet Dosage Forms and Dissolution Testing Samples by First Derivative UV Spectrophotometric Method

Abstract

This article describes the development and validation of a first derivative UV quantitative analytical method for determination of candesartan cilexetil in tablet dosage forms. A signal at 270.1 nm of the first derivative spectrum (ID_270.1) was found adequate for quantification. The limit of quantification was 3.06 µg/ml. The linearity between ID_270.1 nm and concentration of candesartan cilexetil in the range of 6.00–32.00 µg/ml presented a correlation coefficient of (r²) = 0.9990. The mean recovery percentage was 100.97 and 99.23% for candesartan cilexetil standard solution and candesartan standard cilexetil solution with excipients, respectively. The intraday and interday accuracy of the assay was 98.60% and 99.10% respectively. The intraday and interday variability was below 2.0%.

The proposed method is accurate, precise, sensitive, and selective and can be used in quality control laboratories for its intended purpose.     

A Stability-Indicating LC Method for the Simultaneous Determination of Telmisartan and Ramipril in Dosage Form

A simple, rapid, and precise method is developed for the quantitative simultaneous estimation of telmisartan and ramipril in combined pharmaceutical dosage form. A chromatographic separation of the two drugs was achieved with an ACE 5 C₁₈, 25-cm analytical column using buffer–acetonitrile (55:45 v/v). The buffer used in mobile phase contains 0.1 M sodium perchlorate monohydrate in double distilled water pH adjusted 3.0 with trifluoroacetic acid. The instrumental settings are flow rate of 1.5 mL min⁻¹, column temperature at 30 °C, and detector wavelength of 215 nm using a photodiode array detector. The resolution between ramipril and telmisartan were found to be more than 5. Theoretical plates for ramipril and telmisartan were 13,022 and 6,629. Tailing factor for ramipril and telmisartan was 0.94 and 0.98. Telmisartan, ramipril and their combination drug product were exposed to thermal, photolytic, hydrolytic and oxidative stress conditions, and the stressed samples were analysed by the proposed method. Peak homogeneity data of telmisartan and ramipril is obtained using photodiode array detector, in the stressed sample chromatograms, demonstrated the specificity of the method for their estimation in presence of degradants. The described method shows excellent linearity over a range of 20–400 μg mL⁻¹ for telmisartan and 2.5–50 μg mL⁻¹ for ramipril. The correlation coefficient for telmisartan and ramipril are 1. The relative standard deviation for six measurements in two sets of each drug in tablets was always less than 2%. The proposed method was found to be suitable and accurate for quantitative determination and the stability study of telmisartan and ramipril in pharmaceutical preparations.     

Physicochemical Profiling of Sartans: A Detailed Study of Ionization Constants and Distribution Coefficients

A detailed investigation of the ionization and lipophilicity profiles of selected sartans (valsartan, losartan, irbesartan, candesartan, candesartan cilexetil), a class of antihypertensives commonly used in therapy, is presented. The pK_a macroconstants were determined by integrated potentiometry, capillary electrophoresis, and UV spectrophotometry. The measured pK_a macroconstants were connected with the ionizable centers present in each molecule with the aid of model compounds. Potentiometric titrations with the GLpKa apparatus were performed to determine the distribution profile (log D vs. pH) of valsartan, while the shake‐flask procedure was used to characterize the distribution profile of the other compounds. Valsartan showed a lipophilicity profile consistent with the presence of two acidic centers. Losartan and irbesartan, which contain one acidic and one basic center, displayed the classical bell‐shaped profile of ordinary ampholytes. By contrast, a more complex situation emerged in the case of candesartan, due to the large number of ionization equilibria involved. The low solubility of candesartan cilexetil, together with the ease of hydrolysis of the ester moiety, prevented a successful investigation of its ionization and lipophilicity profiles.     

Application of a Validated, Stability-Indicating LC Method to Stress Degradation Studies of Ramipril and Moexipril.HCl

A stability-indicating reversed-phase liquid chromatographic (RPLC) method has been established for analysis of ramipril (RAM) and moexipril hydrochloride (MOEX.HCl) in the presence of the degradation products generated in studies of forced decomposition. The drug substances were subjected to stress by hydrolysis (0.1 m NaOH and 0.1 m HCl), oxidation (30% H₂O₂), photolysis (254 nm), and thermal treatment (80 °C). The drugs were degraded under basic and acidic conditions and by thermal treatment but were stable under other stress conditions investigated. Successful separation of the drugs from the degradation products was achieved on a cyanopropyl column with 40:60 (v/v) aqueous 0.01 m ammonium acetate buffer (pH 6)–methanol as mobile phase at a flow rate of 1 mL min⁻¹. Detection was by UV absorption at 210 nm. Response was a linear function of concentration over the range 5–50 μg mL⁻¹ (r > 0.9995), with limits of detection and quantitation (LOD and LOQ) of 0.04 and 0.09 μg mL⁻¹, respectively, for RAM and 0.014 and 0.32 μg mL⁻¹, respectively, for moexipril. The method was validated for specificity, selectivity, solution stability, accuracy, and precision. Statistical analysis proved the method enabled reproducible and selective quantification of RAM and MOEX as the bulk drug and in pharmaceutical preparations. Because the method effectively separates the drugs from their degradation products, it can be used as stability-indicating.     

Synchronized separation of seven medications representing most commonly prescribed antihypertensive classes by using reversed‐phase liquid chromatography: Application for analysis in their combined formulations

A reversed‐phase high‐performance liquid chromatography method was developed for the simultaneous determination of the diuretic, hydrochlorothiazide, along with six drugs representing the most commonly prescribed antihypertensive pharmacological classes such as atenolol, a selective β₁ blocker, amlodipine besylate, a calcium channel blocker, moexipril hydrochloride, an angiotensin‐converting‐enzyme inhibitor, valsartan and candesartan cilexetil, which are angiotensin II receptor blockers, and aliskiren hemifumarate, a renin inhibitor, using irbesartan as an internal standard. The chromatographic separation was achieved using acetonitrile/sodium phosphate dibasic buffer (0.02 M, pH 5.5) at a flow rate of 1 mL/min in gradient elution mode at ambient temperature on a stationary phase composed of an Eclipse XDB‐C₁₈ (4.6 × 150 mm, 5 μm) column. UV detection was carried out at 220 nm. The method was validated according to ICH guidelines. Linearity, accuracy, and precision were satisfactory over the concentration ranges of 2–40 μg/mL for hydrochlorothiazide and candesartan cilexetil, 20–120, 10–160, 5–40, 20–250, and 5–50 μg/mL for atenolol, valsartan, moexipril hydrochloride, aliskiren hemifumarate, and amlodipine besylate, respectively. The method was successfully applied for the determination of each of the studied drugs in their combined formulations with hydrochlorothiazide. The developed method is suitable for the quality control and routine analysis of the cited drugs in their pharmaceutical dosage forms.     

Kinetics of hydrolysis of five-membered <Emphasis Type="Italic">C</Emphasis>-nitroheterocycles: pyrazole,imidazole, 1,2,4-triazole,and isoxazole derivatives

Alkaline hydrolysis of mono-and dinitro derivatives of five-membered heterocycles, viz., pyrazole, imidazole, 1,2,4-triazole, and isoxazole, is accompanied by the elimination of the nitro group in the form of a nitrite anion. The hydrolysis kinetics was studied by the polarographic and photometric methods. The experimentally determined hydrolysis rate constants depend on the nature of the heterocycle. A possible mechanism for hydrolytic transformations of the compounds under study was proposed on the basis of the calculated thermodynamic parameters of the reaction (Δ G ^≠, ΔH ^≠, ΔS ^≠). Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2719–2725, December, 2005.     

An Application of Quality by Design and Analytical Greenness Assessment Approach for the Development of Erlotinib Stability Indicating Method

Pharmaceutical regulators are worried about medication quality and stability since drug degradation may result in harmful chemicals. Erlotinib (ERL) is a tyrosine kinase inhibitor associated with the epidermal growth factor receptor (EGFR) containing susceptible functional groups such as quinazoline and amine ketone, methoxy, and ethoxy leads to a reduction in pharmaceutical quality. According to the ICH-Q1A (R2) guideline, the goal of ERL stability studies is to establish its susceptibility to degradation under various environmental conditions. A novel isocratic stability–indicating liquid chromatography method has been developed using systemic quality by design (QbD) approach. The QbD strategy includes screening and optimization as phases. Placket Burman was used for primary parameters screening, and critical factors were optimized with response surface design. The prepared degradation samples (acid, base, neutral hydrolysis, oxidative, photolytic, and thermal) were separated using a Shimadzu GIST C18 column (250 mm?×?4.6 mm, 5 µm) with 15 mM ammonium formate: ACN (58:42% v/v) as mobile phase, 0.9 mL/min flow rate, and 246 nm wavelength, which was found to be LC–MS compatible. A total of six degradation products (DPs) were identified with the optimized chromatography method. The drug was sensitive toward acidic and basic hydrolysis, but it remained stable under neutral, oxidative, thermal, and photolytic stress conditions. The optimized method was sensitive, specific, and robust, with linearity ranging from 10 to 35 µg/mL, with a correlation coefficient (R²?=?0.9997). The analytical method greenness score was calculated and observed that the developed method is green.

     

Development and Validation of a New LC Method for Analysis of Brimonidine Tartrate and Related Compounds

A novel liquid chromatographic method for analysis three potential impurities in brimonidine tartrate drug substance has been developed and validated. Efficient chromatographic separation was achieved on a C₈ column (250 mm × 4.6 mm, 5-μm particles) with a simple mobile-phase gradient at a flow rate of 1.0 mL min⁻¹. Quantification was achieved by use of ultraviolet detection at 248 nm. Resolution between brimonidine tartrate and its three potential impurities was greater than 3.0. Regression analysis showed the r value (correlation coefficient) was >0.999 for brimonidine and its three impurities. The method was capable of detecting all three impurities of brimonidine tartrate at levels below 0.07 μg in a test concentration of brimonidine tartrate of 1.0 mg mL⁻¹ and for an injection volume of 10 μL. A solution of brimonidine tartrate in acetonitrile–water 2:8 (v/v) was stable for 48 h. The drug was subjected to stress conditions as prescribed by the ICH. Degradation was found to occur slightly under oxidative stress conditions but the drug was stable to aqueous, acidic, and basic hydrolysis, and photolytic and thermal stress. The assay of the stressed samples was calculated relative to a qualified reference standard and the mass balance was found close to 99.8%. The method was validated for linearity, accuracy, precision, and robustness.

     

Synthesis and electrorheological properties of oxalate group-modified amorphous titanium oxide nanoparticles

A kind of titanium oxide nanoparticles modified with varying amounts of oxalate group was prepared using a modified hydrolysis method. The microstructure, dielectric properties, and electrorheological (ER) performance were investigated. The results indicate that the oxalate group can effectively improve the dielectric properties and surface polarizability of the particles, and the ER performance of modified titanium oxide-based ER fluid is much higher than that of pure titanium oxide-based ER fluid. The shear stress of suitable oxalate group-modified amorphous titanium oxide-based ER fluid with a volume fraction of 30% reaches 47.5 kPa at E = 5 kV/mm, and the current density is less than 18 μAcm⁻². The yield stress can be up to 114 kPa at E = 5 kV/mm with a volume fraction of 40%.     

Development and Validation of an HPLC Method for Determination of Ceftiofur Sodium

An isocratic high-performance liquid chromatographic method has been developed for assay of ceftiofur sodium in drug substance and in sterile powder for injection. Chromatography was performed on a 250 mm × 4.6 mm, 5 μm particle, C₁₈ column with a 78:22 (v/v) mixture of 0.02 m disodium hydrogen phosphate buffer (pH adjusted to 6.0 with 85% orthophosphoric acid) and acetonitrile as mobile phase, at a flow rate of 1.0 mL min⁻¹. The separation was monitored by UV detection at 292 nm. Validation of the method for linearity and range, intra- and inter-day precision, accuracy, specificity, recovery, robustness, and limits of quantification and detection yielded good results. The calibration plot was linear from 20.0–120.0 μg mL⁻¹ and the correlation coefficient was 0.9999. It was shown that ceftiofur was degraded under acidic, alkaline, oxidative, and photolytic conditions. The method was found to be stability-indicating and could be used for routine analysis of ceftiofur sodium for injection.     

Study of Forced Degradation Behaviour of Brinzolamide Using LC–ESI–Q-TOF and In Silico Toxicity Prediction

Brinzolamide (BZA) is a topical ophthalmic drug which is generally used to lower the intraocular pressure during glaucoma. It was subjected to forced degradation studies under hydrolytic (acidic, basic), oxidative, photolytic and thermal stress conditions; the drug degraded significantly in hydrolytic and oxidative conditions, leading to the formation of seven degradation products in total. It was stable on exposure to light and dry heat in the solid state. An ultra-performance liquid chromatography (UPLC) method was developed on a Waters CSH phenyl hexyl column (100 × 2.1 mm, 1.7 µm), using gradient elution of 0.1 % formic acid and methanol as mobile phase. The method was extended to quadrupole time-of-flight mass spectrometry (Q-TOF–MS) for the structural characterisation. All degradation products were comprehensively characterised by UHPLC–ESI/MS/MS experiments. The most probable mechanisms for the formation of degradation products were also proposed. In silico toxicity of the drug and its degradation products was determined using TOPKAT toxicity prediction software.

     

Validation of a Stability-Indicating LC Method for Assay of Ezetimibe in Tablets and for Determination of Content Uniformity

A simple, precise, and accurate HPLC method has been developed and validated for assay of ezetimibe in tablets and for determination of content uniformity. Reversed-phase liquid chromatographic separation was achieved by use of phosphoric acid (0.1%, v/v)–acetonitrile 50:50 (v/v) as mobile phase. The method was validated for specificity, linearity, precision, accuracy, robustness, and solution stability. The specificity of the method was determined by assessing interference from the placebo and by stress testing of the drug (forced degradation). Response was a linear function of drug concentration in the range 20–80 μg mL⁻¹ (r = 0.9999). Intraday and interday system and method precision were determined. Accuracy was between 100.8 and 102.7%. The method was found to be robust, and was suitable for assay of ezetimibe in a tablet formulation and for determination of content uniformity. An erratum to this article can be found at     

Selective separation and characterization of the stress degradation products of ondansetron hydrochloride by liquid chromatography with quadrupole time‐of‐flight mass spectrometry

Ondansetron hydrochloride was subjected to forced degradation studies under various conditions of hydrolysis (acidic, basic, and neutral), oxidation, photolysis, and thermal as prescribed by International Conference on Harmonisation guideline Q1A (R2). A simple, selective, precise, and accurate high‐performance liquid chromatography method was developed on a Waters Xterra C₁₈ (150 × 4.6 mm id, 3.5 μm) column using 10 mM ammonium formate (pH 3.0)/methanol as a mobile phase in gradient elution mode at a flow rate of 0.6 mL/min. The method was extended to liquid chromatography quadrupole time‐of‐flight tandem mass spectrometry for identification and structural characterization of stress degradation products of ondansetron. The drug showed significant degradation in base hydrolytic and photolytic stress conditions in the liquid state, while it was found to be stable in neutral, acidic, thermal, and oxidative stress conditions. A total of five degradation products were characterized and most probable mechanisms for the formation of degradation products have been proposed on the basis of a comparison of the fragmentation of the [M + H]⁺ ions of the drug and its degradation products. Finally, the developed method was validated in terms of specificity, linearity, accuracy, precision, and robustness as per International Conference on Harmonisation guideline Q2 (R1).     

Forced Degradation Study to Develop and Validate Stability-Indicating RP-LC for Quantification of Ropinirole Hydrochloride in Its Modified Release Tablets

A forced degradation study on ropinirole hydrochloride in bulk and in its modified release tablets was conducted under the conditions of hydrolysis, oxidation and photolysis in order to develop an isocratic stability-indicating LC-UV method for quantification of the drug in tablets. An impurity peak in standard solution was found to increase under acidic and neutral hydrolytic conditions while another degradation product was formed under alkaline condition. The drug and its degradation products were optimally resolved on a Hypersil C₁₈ column with mobile phase composed of diammonium hydrogen orthophosphate (0.05 M; pH 7.2), tetrahydrofuran and methanol (80:15:5% v/v) at a flow rate of 1.0 mL min^?1 at 30 °C using 250 nm as detection wavelength. The method was linear in the range of 0.05–50 μg mL^?1 drug concentrations. The %RSD of inter- and intra-day precision studies was <1. The system suitability parameters remained unaffected during quantification of the drug on three different LC systems. Excellent recoveries (101.59–102.28%) proved that the method was sufficiently accurate. The LOD and LOQ were found to be 0.012 and 0.040 μg mL^?1, respectively. Degradation behaviour of the drug in both bulk and tablets was similar. The drug was very unstable to hydrolytic conditions but stable to oxidative and photolytic conditions. The method can be used for rapid and accurate quantification of ropinirole hydrochloride in tablets during stability testing. Based on chemical reactivity of ropinirole in different media, the degradation products were suspected to be different from the known impurities of the drug.     

Stability-Indicating LC Determination of Nitazoxanide in Bulk Drug and in Pharmaceutical Dosage Form

A novel stability-indicating high-performance liquid chromatographic assay method was developed and validated for quantitative determination of nitazoxanide in bulk drugs and in pharmaceutical dosage form in the presence of degradation products generated from forced decomposition studies. An isocratic, reversed phase LC method was developed to separate the drug from the degradation products, using an Ace5- C18 (250 mm × 4.6 mm, 5 μm) column, and 50 mM ammonium acetate (pH 5.5 by acetic acid) and acetonitrile (55:45 v/v) as a mobile phase. The detection was carried out at a wavelength of 240 nm. The nitazoxanide was subjected to stress conditions of hydrolysis (acid, base), oxidation, photolysis and thermal degradation. Degradation was observed for nitazoxanide in base, acid and in 30% H₂O₂ conditions. The drug was found to be stable in the other stress conditions attempted. The degradation products were well resolved from the main peak. The percentage recovery of nitazoxanide was from (100.55 to 101.25%) in the pharmaceutical dosage form. The developed method was validated with respect to linearity, accuracy (recovery), precision, system suitability, specificity and robustness. The forced degradation studies prove the stability indicating power of the method.     

Characterization of degradation products of Ivabradine by LC‐HR‐MS/MS: a typical case of exhibition of different degradation behaviour in HCl and H2SO4 acid hydrolysis

A validated stability‐indicating HPLC method was established, and comprehensive stress testing of ivabradine, a cardiotonic drug, was carried out as per ICH guidelines. Ivabradine was subjected to acidic, basic and neutral hydrolysis, oxidation, photolysis and thermal stress conditions, and the resulting degradation products were investigated by LC‐PDA and LC‐HR‐MS/MS. The drug was found to degrade in acid and base hydrolysis. An efficient and selective stability assay method was developed on Phenomenex Luna C18 (250 × 4.6 mm, 5.0 µm) column using ammonium formate (10 mM, pH 3.0) and acetonitrile as mobile phase at 30 °C in gradient elution mode. The flow rate was 0.7 ml/min and detection wavelength was 286 nm. A total of five degradation products (I‐1 to I‐5) were identified and characterized by LC‐HR‐MS/MS in combination with accurate mass measurements. The drug exhibited different degradation behaviour in HCl and H₂SO₄ hydrolysis conditions. It is a unique example where two of the five degradation products in HCl hydrolysis were absent in H₂SO₄ acid hydrolysis. The present study provides guidance to revise the stress test for the determination of inherent stability of drugs containing lactam moiety under hydrolytic conditions. Most probable mechanisms for the formation of degradation products have been proposed on the basis of a comparison of the fragmentation pattern of the drug and its degradation products. In silico toxicity revealed that the degradation products ( I‐2 to I‐5 ) were found to be severe irritants in case of ocular irritancy. The analytical assay method was validated with respect to specificity, linearity, range, precision, accuracy and robustness. Copyright © 2015 John Wiley & Sons, Ltd.