Simultaneous determination of cadmium and lead in wine by electrothermal atomic absorption spectrometry

A method has been developed for the direct simultaneous determination of Cd and Pb in white and red wine by electrothermal atomic absorption spectrometry (ET-AAS) using a transversely heated graphite tube atomizer (THGA) with longitudinal Zeeman-effect background correction. The thermal behavior of both analytes during pyrolysis and atomization stages were investigated in 0.028 mol l⁻¹ HNO₃ and in 1+1 v/v diluted wine using mixtures of Pd(NO₃)₂+Mg(NO₃)₂ and NH₄H₂PO₄+Mg(NO₃)₂ as chemical modifiers. With 5 μg Pd+3 μg Mg as the modifiers and a two-step pyrolysis (10 s at 400°C and 10 s at 600°C), the formation of carbonaceous residues inside the atomizer was avoided. For 20 μl of sample (wine+0.056 mol l⁻¹ HNO₃, 1+1, v/v) dispensed into the graphite tube, analytical curves in the 0.10–1.0 μg l⁻¹ Cd and 5.0–50 μg l⁻¹ Pb ranges were established. The characteristic mass was approximately 0.6 pg for Cd and 33 pg for Pb, and the lifetime of the tube was approximately 400 firings. The limits of detection (LOD) based on integrated absorbance (0.03 μg l⁻¹ for Cd, 0.8 μg l⁻¹ for Pb) exceeded the requirements of Brazilian Food Regulations (decree #55871 from Health Department), which establish the maximum permissible level for Cd at 200 μg l⁻¹ and for Pb at 500 μg l⁻¹. The relative standard deviations (n=12) were typically <8% for Cd and <6% for Pb. The recoveries of Cd and Pb added to wine samples varied from 88 to 107% and 93 to 103%, respectively. The accuracy of the direct determination of Cd and Pb was checked for 10 table wines by comparing the results with those obtained for digested wine using single-element ET-AAS, which were in agreement at the 95% confidence level.     

Radiotracer study of the behaviour of arsenic in the graphite furnace

Summary The behaviour of As(III) and As(V) in the graphite furnace during the individual steps of the temperature program was investigated by means of the radiotracer⁷⁶As. The investigated matrix systems include 1 mol/l HCl, 0.2 mol/l HNO₃, 0.2 mol/l NaCl, urine, human serum and a tetramethylammonium hydroxide solution of hair. Significant stabilization effects can be achieved in the preatomization steps by using Ni, W, Mo, Pd, H₂O₂ as well as the mixtures H₂O₂ + Pd, HNO₃ + Pd and H₂O₂ + Ni as matrix modifiers. In sample solutions containing chloride, stabilization of As(III) is possible only in presence of nitric acid. The experimental conditions for the determination of As in urine, human serum and hair have been optimized.

---

Radiotracer-Untersuchung des Verhaltens von Arsen im Graphitofen

---

Dedicated to Prof. Dr. G. Tölg on the occasion of his 60th birthday     

Direct determination of lead in sweet fruit-flavored powder drinks by electrothermal atomic absorption spectrometry

A simplified method for direct determination of lead in sweet fruit-flavored powder drinks, syrups and honeys by electrothermal atomic absorption spectrometry without sample digestion is proposed. Samples were dissolved in water, acidified to 0.2% (v/v) HNO₃, and directly injected into an end-capped transversely heated graphite atomizer (THGA). Building up of carbonaceous residue inside the atomizer was effectively precluded for sugar solutions not exceeding 8.0% (m/v) when a heating program with two pyrolysis steps (600 and 1000°C) was carried out without air-ashing. Under these conditions one atomizer supported about 250 firings. Among various chemical modifiers tested, better recovery and repeatability results were obtained with a 5 μg Pd + 3 μg Mg(NO₃)₂ mixture. Tests carried out with individual concomitants containing up to 1.0 μg Na, K, Ca or Cl, and up to 10.0 μg phosphate or sulphate, and several mixtures of these six concomitants, did not reveal significant interferences on lead atomization. Characteristic mass and detection limit based on integrated absorbance were 15 and 11 pg Pb, respectively. The relative standard deviation based on 10 measurements for typical samples (20–60 ng g⁻¹ Pb) was always lower than 5.5%. The detection limit of 7.0 ng g⁻¹ Pb attained the Codex recommendation for the maximum allowed lead contents in the sugar samples. Application of t-test to the results obtained by the proposed direct analysis, and the official method adopted by Food Chemical Codex, demonstrated that there were no significant differences at the 5% probability level.     

Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.     

Determination of beryllium and selenium in human urine and of selenium in human serum by graphite-furnace atomic absorption spectrophotometry.

For human urine beryllium (Be), each sample (500 microl) was diluted (1+1) with Nash reagent (containing 0.2% (v/v) acetylacetone and 2.0 M ammonium acetate buffer at pH 6.0) and then a 20-microl volume of Triton X-100 (0.4%, v/v) aqueous solution was added. An aliquot (10 microl) of the diluted urine mixture was introduced into a graphite cuvette and was atomized according to a temperature program. The method detection limit (MDL, 3sigma) for Be was 0.37 microg/l in the undiluted urine sample and the calibration graph was linear up to 65.0 microg/l. Calibration graphs were prepared by the standard addition method. Accuracies of 98.6-102% were obtained when testing standard reference material (SRM 2670) freeze dried human urine samples. Precision (relative standard deviation, RSD) for urine Be was < or = 2.3% (withinrun, n = 5) and was < or = 3.0% (between-run, n = 3). For human urine and serum selenium (Se), samples (100 microl) were diluted with HNO3 (0.2%, v/v) to make a (1+1) dilution for urine analysis or a (1+4) dilution for serum analysis. An additional aliquot (10 microl) of Triton X-100 (0.1%, v/v) was added to each 200 microl of (1+1) diluted urine (or 20 microl of the Triton X-100 was added to each 500 microl of (1+4) diluted serum) sample. After the diluted sample mixture (10 microl) was introduced into a graphite cuvette, the corresponding chemical modifier (10 microl, containing Ni2+ + Pd + NH4NO3 in HNO3 (0.2%, v/v)) was added to it and the mixture was atomized. The MDL (3sigma) for Se in urine and in serum was 4.4 and 21.4 microg/l in undiluted sample, respectively, and the calibration graphs were linear up to 150 and 400 microg/l. Accuracies of urine Se were 98.9 - 99.4% by testing SRM 2670 (NIST) urine standards with RSD (between-run, n = 3) within 2.9%; and that of serum Se was 97.2% when testing a certified second-generation human serum (No. 29, #664) with RSD (between-run, n = 3) of 1.4%. The proposed method can be applied easily, directly, and accurately to the measurement of Be and Se in real samples (including six urine Se and four serum Se from patients of Blackfoot Disease in Taiwan).     

Identification of Thermal Decomposition Products and Reactions for Liquid Ammonium Nitrate on the Basis of Ab Initio Calculation

This work analyzed the thermal decomposition of ammonium nitrate (AN) in the liquid phase, using computations based on quantum mechanics to confirm the identity of the products observed in past experimental studies. During these ab initio calculations, the CBS‐QB3//ωB97XD/6–311++G(d,p) method was employed. It was found that one of the most reasonable reaction pathways is HNO₃ + NH₄⁺ → NH₃NO₂⁺ + H₂O followed by NH₃NO₂⁺ + NO₃^– → NH₂NO₂ + HNO₃. In the case in which HNO₃ accumulates in the molten AN, alternate reactions producing NH₂NO₂ are HNO₃ + HNO₃ → N₂O₅ + H₂O and subsequently N₂O₅ + NH₄⁺ → NH₂NO₂ + H₂O. In both scenarios, HNO₃ plays the role of a catalyst and the overall reaction can be written as NH₄⁺ + NO₃^– (AN) → NH₂NO₂ + H₂O. Although the unimolecular decomposition of NH₂NO₂ is thermodynamically unfavorable, water and bases both promote the decomposition of this molecule to N₂O and H₂O. Thus AN thermal decomposition in the liquid phase can be summarized as NH₄⁺ + NO₃^– (AN) → N₂O + 2H₂O.     

Evaluation of tungsten–rhodium coating on an integrated platform as a permanent chemical modifier for cadmium,lead, and selenium determination by electrothermal atomic absorption spectrometry

A tungsten–rhodium coating on the integrated platform of a transversely heated graphite atomizer is proposed as a permanent chemical modifier for the determination of Cd, Pb, and Se by electrothermal atomic absorption spectrometry. It was demonstrated that coating with 250 μg W+200 μg Rh is as efficient as the conventional Mg(NO₃)₂+NH₄H₂PO₄ or Pd+Mg(NO₃)₂ modifiers for avoiding most serious interferences. The permanent W–Rh modifier remains stable for 300–350 firings of the furnace, and increases tube lifetime by 50%–100% when compared to pyrolytic carbon integrated platforms. Also, there is less degradation of sensitivity during the atomizer lifetime when compared with the conventional modifiers, resulting in a decreased need of re-calibration during routine analysis. The characteristic masses and detection limits achieved using the permanent modifier were respectively: Cd 1.1±0.4 pg and 0.020 μgL⁻¹; Pb 30±3 pg and 0.58 μgL⁻¹ and Se 42±5 pg and 0.64μgL⁻¹. Results from the determination of these elements in water reference materials were in agreement with the certified values, since no statistical differences were found by the paired t-test at the 95% level.     

Slurry sampling for determination of lead in marine plankton by electrothermal atomic absorption spectrometry

A slurry sampling method has been developed for the determination of Pb in marine plankton by ETAAS using a freshwater plankton certified reference material (CRM 414). Slurries were prepared in 1–3% m/v range with 1% v/v HNO₃ by ultrasonic agitation for 5 min. The effects of several chemical modifiers, including Ir(NO₃)₂, Mg(NO₃)₂, Pd(NO₃)₂, Pd(NO₃)₂ + Mg(NO₃)₂, and Mg(NO₃)₂ + NH₄H₂PO₄, were investigated for the stabilization of Pb during thermal pretreatment. Lead in slurries was effectively stabilized up to 1000 °C with Ir, Pd and Pd + Mg modifiers among which Pd + Mg provided the best results with complete atomization at 1850 °C. Firings in the presence of Ir were, problematic due to ash formation inside the atomizer. Water, dilute HNO₃ and HF were examined as suspension medium. Dilute HNO₃ (1–2% v/v) proved to be advantageous over water as it afforded extraction of Pb from plankton almost quantitatively in 5 min agitation. Hydrofluoric acid was the least suitable medium. Increasing HF concentration up to 5% v/v resulted in inaccuracy and substantial background absorption. Fast-heating furnace method provided comparable accuracy and precision to that of conventional-heating in slurries of CRM 414. Detection limits and characteristic masses were, respectively, 0.49 μg L^− 1 and 32 pg for the conventional method and 0.62 μg L^− 1 and 37 pg for the fast-heating method. However, fast-heating approach suffered from distorted peaks at high temperatures and incomplete pyrolysis of matrix at lower temperatures. Analysis of marine plankton samples for Pb was performed by using the conventional furnace program. The results showed a high correlation with those obtained by solution ICP-MS. Differences were statistically insignificant within 95% confidence interval.     

Determination of cadmium, copper and lead in soils, sediments and sea water samples by ETAAS using a Sc + Pd + NH(4)NO(3) chemical modifier

Cadmium, copper and lead in soils, sediments and spiked sea water samples have been determined by electrothermal atomic absorption spectrometry (ETAAS) with Zeeman effect background corrector using NH₄NO₃, Sc, Pd, Sc + NH₄NO₃, Pd + NH₄NO₃, Sc + Pd and Sc + Pd + NH₄NO₃ as chemical modifiers. A comprehensive comparison was made among the modifiers and without modifier in terms of pyrolysis and atomization temperatures, atomization and background absorption profiles, characteristic masses, detection limits and accuracy of the determinations. Sc + Pd + NH₄NO₃ modifier mixture was found to be preferable for the determination of analytes in soil and sediment certified and standard reference materials, and sea water samples because it increased the pyrolysis temperature up to 900 °C for Cd, 1350 °C for Cu and 1300 °C for Pb. Optimum masses of mixed modifier components found are 20 μg Sc + 4 μg Pd + 8 μg NH₄NO₃. Characteristic masses of Cd, Cu and Pb obtained are 0.6, 5.3 and 15.8 pg, respectively. The detection limits of Cd, Cu and Pb were found to be 0.08, 0.57 and 0.83 μg l⁻¹, respectively. Depending on the solid sample type, the percent recoveries were increased up to 103% for Cd, Cu and Pb by using the proposed modifier mixture. The accuracy of the determination of analytes in the sea water samples was also increased.     

Use of the internal standardization for difficult sampling by graphite furnace atomic absorption spectrometry

This work shows the potentiality of As as internal standard to compensate errors from sampling of sparkling drinking water samples in the determination of selenium by graphite furnace atomic absorption spectrometry. The mixture Pd(NO₃)₂/Mg(NO₃)₂ was used as chemical modifier. All samples and reference solutions were automatically spiked with 500 μg l⁻¹ As and 0.2% (v/v) HNO₃ by the autosampler, eliminating the need for manual dilutions. For 10 μl dispensed sample into the graphite tube, a good correlation (r=0.9996) was obtained between the ratio of analyte absorbance by the internal standard absorbance and the analyte concentrations. The relative standard deviations (R.S.D.) of measurements varied from 0.05 to 2% and from 1.9 to 5% (n=12) with and without internal standardization, respectively. The limit of detection (LD) based on integrated absorbance was 3.0 μg l⁻¹ Se. Recoveries in the 94-109% range for Se spiked samples were obtained. Internal standardization (IS) improved the repeatability of measurements and increased the lifetime of the graphite tube in ca. 15%.     

Internal standardization in graphite furnace atomic absorption spectrometry: Comparative use of As and Ge to minimize matrix effects on Se determination in milk

Arsenic and germanium have been evaluated as internal standards to minimize matrix effects on the direct determination of selenium in milk by graphite furnace atomic absorption spectrometry (GFAAS) using tubes with integrated platform, pre-treated with W together with Pd as chemical modifier. The efficiency of As and Ge as internal standards for 25 μg L^− 1 Se plus 500 μg L^− 1 As or Ge in diluted (1 + 9 v/v) milk plus 1.0% (v/v) HNO₃ was evaluated by means of correlation graphs plotted from the normalized absorbance signals (n = 20) of internal standard (axis y) versus analyte (axis x). The equations that describe the linear regression were: A^As = − 0.004 ± 0.019 + 1.02 ± 0.019 A^Se (r = 0.9967 ± 0.005); A^Ge = − 0.017 ± 0.015 + 1.01 ± 0.015 A^Se (r = 0.9978 ± 0.004). Samples and reference solutions were automatically spiked with 500 μg L^− 1 Ge or As and 1.0% (v/v) HNO₃ by the autosampler. For 20 μL of aqueous standard solutions, analytical curves in the 5.00–40.0 μg L^− 1 Se range were established using the ratio of Se absorbance to internal standard absorbance (A^Se / A^IS) versus analyte concentration, and good linear correlations were obtained. The characteristic mass was 40 pg Se. Limits of detection were 0.55 and 0.40 μg L^− 1 with As and Ge as the internal standard, respectively. Relative standard deviations (RSD) for a sample containing 25 μg L^− 1 Se were 1.2% and 1.0% (n = 12) using As and Ge, respectively. The RSD without internal standardization was about 6%. The accuracy of the proposed method was evaluated by an addition-recovery experiment and all recovered values were in the 99–105% range with IS and in the 70–80% range without IS. Using Ge as the internal standard, results of analysis of standard reference materials were in agreement with certified values at a 95% confidence level. The selenium concentration for 10 analyzed milk samples varied from 5.0 to 20 μg L^− 1.     

Determination of selenium in human body fluids by hydride-generation atomic absorption spectrometry : Optimization of sample decomposition

The accuracy of the determination of selenium in human body fluids by hydride-generation a.a.s. depends critically upon the sample decomposition-method used. Digestion with HNO₃ alone gave low selenium recoveries, but with nitric, sulfuric and perchloric acids at a final temperature of 310°C gave results that agreed with those obtained by other techniques. The recovery of selenomethionine added to whole blood and of trimethylselenonium iodide added to urine was 97–104%. The average selenium values found for 6 healthy individuals were 88 μg l^?1 in whole blood, 75 μg l^?1 in blood plasma and 307 μg (kg Hb)^?1 in erythrocytes. A detection limit of 5 μg l^?1 Se in body fluids was found under routine conditions.     

Preatomization behaviour of Se(-II), Se(IV), and Se(VI) in the graphite furnace without and with matrix modifiers

Summary Using ⁷⁵Se as a radiotracer, the preatomization behaviour of selenium in the graphite furnace was studied. The selenium forms investigated included Se(-II)-methionine, selenite, and selenate in a 0.2% HNO₃ solution, and in a 0.2% HNO₃ solution containing 1% NaCl. The effect of nickel nitrate and of the mixture of palladium/magnesium nitrates as matrix modifiers and of boron nitride coating of the graphite tube on the behaviour of selenium was investigated. The best stabilization effect for all oxidation states of selenium in the conventional graphite tube was achieved by using the mixture Pd/Mg. A considerable degree of modifier-free stabilization of selenuium could be achieved in boron nitride coated tubes. After the conversion of Se(IV) to a volatile piaselenol, a quantitative preatomization separation of Se(IV) from Se(VI) in the boron nitride coated tube was possible. However problems with these newtype tubes still to be solved include the need to increase the thermal stability of the coating.     

The determination of low lead levels in the bone of lead-depleted mice by graphite furnace atomic absorption spectrometry

Low lead levels in the femurs of mice fed with a lead-depleted diet have been determined by use of electrothermal atomic absorption spectrometry with Zeeman-effect background correction. The method is based on the use of Mg(NO₃)₂/Pd as matrix modifier which enables significant reduction of the spectral interferences prevalent if chemical modifiers based on NH₄H₂PO₄ with either Ca or Mg are used for samples rich in Ca₃(PO₄)₂ matrix. The method was developed and validated by use of the NIST standard reference material 1486 bone. Bones were decomposed in a pressurized microwave-heated system using 70% nitric acid. Forty-three mice femurs, with a mass of 74.62 ± 12.54 mg, were dissolved in concentrated nitric acid. The lead results found in SRM 1486 (1.25 ± 0.15 μg g^–1, n = 9) were in good agreement with the certificate (1.335 ± 0.014 μg g^–1). Recoveries of 200 ng lead added to the SRM before or after digestion were 99.0 ± 1.4% and 98.5 ± 1.6%, respectively. The lead detection limit in bone samples is 0.06 μg g^–1 dry mass. This method is, therefore, suitable for the determination of very low lead levels (0.06–0.20 μg Pb kg^–1 bone) in the femurs of mice fed a diet with lead level of < 20μg kg^–1.     

Extractive—spectrophotometric determination of americium at trace levels with arsenazo-III

Americium(III) can be quantitatively extracted with 1 M diisoamylsulphoxide in Solvesso-100 from aqueous 0.02 M HNO₃—2.5 Al(NO₃)₃ solutions and, after dilution of the extract with ethanol and nitric acid, determined in the organic phase with arsenazo-III. The apparent molar absorptivity is 1.58 × 10⁵ l mol^-1 cm^-1 at 652 nm. The system obeys Beer's law within the range 0.1–1.6 μg Am ml^-1; 0.11 μg Am ml^-1 is determined with a reproducibility better than ±2%. Relatively large amounts of Ca(II), Cr(III), Fe (III), U(VI), Cl^-, NO₂^-, NO₃^- and F^- are tolerated. Interferences of Ce(IV), Pu(IV) and Th(IV) are eliminated by prior extraction with 2-thenoyltrifluoroacetone; only europium(III) interferes appreciably. Colour development is almost instantaneous and absorbances are virtually constant for 12 h.     

The effect of ammonium thiocyanate and sodium chloride on loss and recovery of mercury from water during storage

The effect of inorganic complexing agents such as thiocyanate and chloride on the stability of distilled water and natural waters spiked with 1 μg Hg l^-1 in polyethylene containers is reported. Distilled water solutions can be stored for several months without significant losses of mercury if they contain HNO₃(0.05–0.1 M) + NH₄SCN(0.001–0.01 M) or HNO₃(0.1 M) + NaCl(higher than 0.01 M). For river and pond waters, addition of HNO₃(0.1 M) + NH₄SCN(0.01 M) not only has a pronounced effect on preventing mercury losses, but also gives quantitative recoveries from spiked sample solutions from which mercury has been “lost”. Thiocyanate ion-favors desorption of mercury from solid phases; chloride is less effective in this respect.     

Development of an ultrasensitive stacking technique for 5‐nitroimidazole determination in untreated biological fluids by micellar electrokinetic chromatography

Cation‐selective exhaustive injection and sweeping followed by a MEKC separation is evaluated for the sensitive analysis of 5‐nitroimidazoles in untreated human serum and urine. Deproteinized serum and urine samples were diluted 76 and 143 times, respectively, in a low‐conductivity solvent (5.00 mM orthophosphoric acid containing 5.0% v/v methanol). Samples were electrokinetically injected at 9.8 kV for 632 s in a previously conditioned fused‐silica capillary (65.0 cm × 50 μm id). Separation was performed at –30 kV and 20°C using 44 mM phosphate buffer (pH 2.5), 123 mM SDS, and 8% v/v tetrahydrofurane as BGE. Signals were monitored at 276 nm and peak area was selected as analytical response. Good linearity (R² ≥ 0.988) and LODs lower than 1.5 and 1.8 μg/mL were achieved in serum and urine, respectively.     

Properties of nitric acid palladium solutions with a high metal concentration

Nitric acid solutions (c _Pd up to 3.2 M) with variable HNO₃ concentration were studied by electronic spectroscopy, ¹⁴N and ¹⁷O NMR, acid-base titration, gravimetry, and other methods. Solid phases that precipitated on storing these solutions were studied by X-ray phase analysis, thermogravimetry, and IR spectroscopy. The conditions for stability of particular Pd(II) species were determined, and specific features of aging of such highly concentrated palladium solutions were revealed. A procedure for palladium isolation as [Pd(NH₃)₄](NO₃)₂ from nitric acid solutions in 98% yield was developed.     

Temperature-dependent rate constant for the reaction of F atoms with HNO3

The kinetics of the reaction of F atom with HNO₃, source of NO₃ radicals widely used in laboratory studies, has been investigated at nearly 2.7 mbar total pressure of helium over a wide temperature range, T = 220-700 K, using a low-pressure discharge flow reactor combined with an electron impact ionization quadrupole mass spectrometer. The rate constant of the reaction F + HNO₃ → NO₃ + HF (1) was determined using both relative rate method and absolute measurements under pseudo–first-order conditions, monitoring the kinetics of F-atom consumption in excess of HNO₃, k₁ = (8.2 ± 0.4) × 10⁻¹² exp((315 ± 15)/T) cm³ molecule⁻¹ s⁻¹ (where the uncertainties represent precision at the 2σ level, the estimated total uncertainty on k₁ being 15% at all temperatures). The reaction rate constant was found to be in excellent agreement with the only previous temperature-dependent study. Experiments on detection of the reaction product, HF, have shown that NO₃ and HF forming channel of the title reaction is the dominant, if not unique, on the whole temperature range of the study.     

Ultrasound-assisted extraction of gold and silver from environmental samples using different extractants followed by electrothermal-atomic absorption spectrometry

Ultrasound-assisted extraction combined with electrothermal-atomic absorption spectrometry has been applied to the determination of silver and gold at μg g^{− 1} levels in different environmental samples such as soil, sediment, fly ash and industrial sludge. Two different extraction systems have been tried, i.e. acid mixtures (HCl, HF, and HNO₃) and thiourea in diluted H₂SO₄ medium. In both cases, an efficient cup-horn sonoreactor was used as ultrasonic device to accelerate the extraction process. This ultrasonic processor allows the use of any extractant including HF and simultaneous treatment of up to six samples. Recovery ranged from 81% to 107% for silver, and from 91% to 105% for gold. Optimal acid mixtures were 25% v/v HNO₃ + 25% v/v HF for Ag and 25% v/v HNO₃ + 25% v/v HCl for Au. The thiourea method required 0.6% m/v thiourea + 2% v/v H₂SO₄. The latter method was considered advantageous since efficient Au and Ag extractions were obtained in a short time, and moreover, wastes generated were less harmful to the environment. Limits of detection for Ag and Au were 0.012 and 0.050 μg g^{− 1}, respectively. Repeatability expressed as relative standard deviation ranged from 2 to 10% for both metals. Both extraction methods were applied to the determination of Au and Ag in sediments and soils located at different sampling points from Galicia (Spain).