新型双染料敏化的宽带光聚物全息特性研究

报道了一种新型、两种染料共同敏化的宽带响应光聚物材料.该材料使用孟加拉玫瑰红和亚甲基蓝作为联合光敏剂,由于混合染料的加入,使材料的感光光谱范围大大加宽.用四种波长的光对样品进行曝光,衍射效率均大于40%,最高可达80%,适合于多波长存储,分别用不同波长的激光在样品同一位置存储了四幅不同的图像,其再现图像效果良好,表明该材料是一种较理想的多波长全息存储材料.     

Holographic digital data storage using phase-modulated pixels

We propose and demonstrate the use of phase images for holographic data storage. Use of phase images as input leads to uniform diffraction efficiency of multiplexed data pages. Use of binary phase-based data pages with 0 and π phase changes produces uniform spectral distribution at the Fourier plane. This in turn facilitates better recording of higher spatial frequencies. We experimentally demonstrate a phase-based holographic data storage system using shift multiplexing in a Fe:LiNbO₃ crystal, and use it for associative retrieval. Preliminary studies indicate high discrimination capabilities of phase-based holographic data storage system over the amplitude-based system in a content-addressable memory.     

Minimizing the effects of unmodulated light and uneven intensity profile on the holographic images reconstructed by pixelated spatial light modulators

A simple and effective approach is proposed to minimize the effect of unmodulated light and uneven intensity caused by the pixelated structure of the spatial light modulator in a holographic display. A more uniform image is produced by purposely shifting the holographic images of multiple reconstructed lights with different incident angles from the zero-diffraction-order and overlapping those selected different orders. The simulation and optical experimental results show that the influence of the zero-diffraction-order can be reduced, while keeping the good uniformity of the target images by this new approach.     

Multislip spatial filtered pseudocolor holographic imaging

A technique of pseudocolor encoding of spatial holographic imaging by a multslit rainbow process is illustrated. The encoding takes place at the spatial frequency plane of a coherent optical processor. The pseudocolor hologram imaging is obtained by white light reconstruction of the multiplexed rainbow hologram. The basic advantage of this technique as compared with the multiwavelength technique is the elimination of multicoherent sources. This multislit technique provides a simple encoding process for which a broad range of pseudo-color holographic images can be easily obtained. The potential applications of this technique may range from aerial photography for remote sensing to X-ray transparencies for medical diagnosis.     

Multilevel phase and amplitude modulation method for holographic memories with programmable phase modulator

The utilization of spatial quadrature amplitude modulation (SQAM) signals with amplitude and phase modulation is a simple method used to improve storage capacity in a holographic data storage system. We propose a multilevel phase and amplitude modulation method for holographic memories with a programmable phase modulator (PPM). In this method, holographic page data is recorded by a two-step exposure process for different phase-modulated data. There is no need to adjust the positions of spatial light modulators (SLM) with high accuracy because we use only one spatial modulator. We estimate the quality of 16 SQAM signals produced by our technique.     

利用菌紫质薄膜进行角度复用和偏振复用全息存储实验研究

全息光存储以其高密度、大容量、高速并行数据存取而成为光存储领域的一个重要研究方向。生物光致变色材料———菌紫质是一种新型可擦重写全息记录介质。实验证明了使用菌紫质薄膜进行角度复用和偏振复用全息存储的可行性。利用菌紫质的光致变色特性,采用90°角度复用全息存储光路,在BR-D96N薄膜样品同一位置上实现了6幅全息图存储,并分别读出了无串扰的再现像。利用菌紫质薄膜的光致各向异性进行了偏振复用全息存储,在BR-D96N薄膜样品的同一位置上存储了两幅正交偏振光记录的图像,用原参考光再现和偏振片选择,可分别读出这两幅图像。     

Phase-modulated multigroup volume holographic correlator

We propose a hybrid multiplexing method for volume holographic correlators based on the combination of orthogonal random phase modulation of an object beam and two-dimensional angular multiplexing of a reference beam. This method implements storing multiple groups of library images in a single storage location and outputting multiple groups of correlation spots by switching the modulation phase masks. Three experiments are designed to test the validity of this method.     

Reconstruction resolution enhancement of EPISM based holographic stereogram with hogel spatial multiplexing

We investigate how the splicing mode of a holographic element (hogel) affects the reconstruction of a 3D scene to improve the reconstruction resolution of a holographic stereogram fabricated using the effective perspective image segmentation and mosaicking method (EPISM). First, the effect of hogel spatial multiplexing on holographic recording and reconstruction is studied based on the mechanism of recording interference fringes in the holographic recording medium. Second, combined with the influence of multiple exposures on the hologram's diffraction efficiency, the diffraction efficiency of the holographic stereogram is analyzed in the spatial multiplexing mode. The holographic stereogram is then regarded as a special optical imaging system. The theory of spatial bandwidth product is adopted to describe the comprehensive resolution of the holographic stereogram, which explains why hogel spatial multiplexing can significantly improve the reconstruction resolution of a holographic stereogram. Compared with the traditional printing method under the same parameters in optical experiments, hogel spatial multiplexing has a lower diffraction efficiency but a higher quality of reconstructed image, consistent with the theoretical analysis.     

Common-path phase-shifting lensless holographic microscopy

We present an approach capable of high-NA imaging in a lensless digital in-line holographic microscopy layout even outside the Gabor's regime. The method is based on spatial multiplexing at the sample plane, allowing a common-path interferometric architecture, where two interferometric beams are generated by a spatial light modulator (SLM) prior to illuminating the sample. The SLM allows phase-shifting interferometry by phase modulation of the SLM diffracted beam. After proper digital processing, the complex amplitude distribution of the diffracted object wavefront is recovered and numerically propagated to image the sample. Experimental results are reported that validate the proposed method.     

Visible reconstruction by a circular holographic display from digital holograms recorded under infrared illumination

A circular holographic display that consists of phase-only spatial light modulators is used to reconstruct images in visible light from digital holograms recorded under infrared (10.6?μm) illumination. The reconstruction yields a holographic digital video display of a three-dimensional ghostlike image of an object floating in space where observers can move and rotate around it.     

Ultrafast holographic Stokesmeter for polarization imaging in real time

We propose an ultrafast holographic Stokesmeter using a volume holographic substrate with two sets of two orthogonal gratings to identify all four Stokes parameters of the input beam. We derive the Mueller matrix of the proposed architecture and determine the constraints necessary for reconstructing the complete Stokes vector. The speed of this device is determined primarily by the channel spectral bandwidth (typically 100 GHz), corresponding to a few picoseconds.     

Tunable dual-wavelength operation of an external cavity semiconductor laser

Tunable dual-wavelength operation of a laser diode has been achieved using a dual-period holographic element. The holographic element was positioned in Littrow configuration in an external cavity. The design of this holographic element was based on the superposition of a constant-period grating and a variable-period grating on the same location in a photoresist. We observed simultaneous emission at two wavelengths from a visible semiconductor laser operated with this holographic element. The spectral separation of the dual-wavelength output was varied from 0.76 to 6.27 nm by a simple translation of the holographic element.     

Holographic Image Denoising using Random Laser Illumination

In holographic applications, coherent lasers are indispensable source of illumination. Despite high intensity from coherent light sources, they fail in full-field image projection and illustrate speckle images due to high spatial coherence. This article demonstrates speckle-free high contrast computer-generated holographic image projection upon illumination with a perovskite–polystyrene 10 wt%-based random laser. Solvent-engineered efficient and durable perovskite and perovskite–polystyrene 10 wt%-based random lasers are fabricated. Optical characterizations are elucidated and controlled coherence random lasing operation is achieved under room temperature upon addition of polystyrene concentration 10 wt% on perovskite thin film. The addition of 10 wt% polystyrene concentration results in a low far-field divergence angle of ≈10⁰. The controlled coherence in random lasers is necessary to produce a stable interference pattern and to retain the depth of field in holograms. Additionally, the holographic image projection using random lasers reduces diffraction noise, and exhibits high spatial resolution with full-field imaging. Moreover, this study is clear evidence of an effective strategy to achieve high-performance, indigenous designed-controlled coherence in disordered random lasing media and its application to novel holographic image projection.     

Formation of the holographic image of a diffuse object in second-harmonic radiation generated by a nonlinear medium

Results of experiments on recording three-dimensional holographic images of extended diffuse objects using an SHG hologram generating the second harmonic are presented. In this case, the object image is formed by the second-harmonic radiation whose wavelength is smaller than the wavelength of object and reference waves recorded on a hologram by a factor of two. Elements of the theory of an SHG hologram are considered. A holographic image of a transparency object illuminated with diffuse light is obtained. It is shown that the resolving power of this image is close to the limit determined by diffraction effects. An experiment on defocusing the reconstructed image showed that it was localized in one spatial plane and, therefore, was three-dimensional.     

Sensor resolution enhancement for remote imaging by synthesizing mask-based camera array images

In this paper, we propose an architecture based on camera array with masks to enhance the sensor resolution of remote imaging system. The sensor resolution is enhanced by multiplexing the sensor images of each camera, in which the angular resolution bandwidth is converted using masks to expand the spatial resolution bandwidth. The improvement of the sensor resolution depends on the number of cameras in the array. The theory of improving the sensor resolution is discussed both in Fourier domain and spatial domain. We verify resolution enhancement of the architecture by ray-tracing imaging simulation. A simulation model is built to verify the resolution-enhancing ability of the camera array architecture. From each camera in the array, we get a resolution-limited image. The reconstructed image is synthesized from all the images of the cameras. The post-synthesized image has finer information details compared with the images of each camera. The resolution improvement varies with the object distance. The optimal resolution improvement of the reconstructed image is equal to the total sensor pixels of the camera array.     

莫尔条纹分析在数字全息存储器中的应用

针对像素不匹配的数字全息存储器中出现的莫尔条纹现象,提出了利用莫尔条纹进行全息存储光路精确调整来实现像素匹配的方法.通过对CCD像面图像中莫尔条纹的周期和角度进行分析,得到光学系统需要的精确调整参数.实验中,实现了空间光调制器和光电耦合器阵列512×512像素的1:1像素匹配,该方法能提高读取速度并降低误码率.     

莫尔条纹分析在数字全息存储器中的应用

针对像素不匹配的数字全息存储器中出现的莫尔条纹现象,提出了利用莫尔条纹进行全息存储光路精确调整来实现像素匹配的方法.通过对CCD像面图像中莫尔条纹的周期和角度进行分析,得到光学系统需要的精确调整参数.实验中, 实现了空间光调制器和光电耦合器阵列512×512像素的1∶1像素匹配,该方法能提高读取速度并降低误码率.     

Holographic storage of three-dimensional image and data using photopolymer and polymer dispersed liquid crystal films

We present holographic storage of three-dimensional(3D) images and data in a photopolymer film without any applied electric field.Its absorption and diffraction efficiency are measured,and reflective analog hologram of real object and image of digital information are recorded in the films.The photopolymer is compared with polymer dispersed liquid crystals as holographic materials.Besides holographic diffraction efficiency of the former is little lower than that of the latter,this work demonstrates that the photopolymer is more suitable for analog hologram and big data permanent storage because of its high definition and no need of high voltage electric field.Therefore,our study proposes a potential holographic storage material to apply in large size static 3D holographic displays,including analog hologram displays,digital hologram prints,and holographic disks.     

Optical encryption with a reference wave in a joint transform correlator architecture

In this work we introduce a digital holographic configuration in a Joint Transform Correlator (JTC) architecture for encryption purposes. Conceptually, it is a Mach-Zender interferometer, with a JTC in one arm and a reference wave in the other. We describe the practical implementation of this architecture, along with experimental results that support the proposal. We analyze the noise influence caused by intensity saturation during image capture, and this information allows us a filtering process to reduce the information to be handled, with a consequent increase in the speed of the total procedure.