Effect of heterocyclic diimine ligands with donor and acceptor substituents on the spectroscopic and electrochemical properties of Au(III) complexes

The composition, structure, and properties of a series of Au(III) complexes with heterocyclic diimine ligands [Au(N^N)Cl₂]⁺, where (N^N) = 2,2′-bipyridine (Bipy), 4,4′-dimethyl-2,2′-bipyridine (DmBipy), 2,2′-biquinoline (Bqx), 1,10-phenanthroline (Phen), 2,9-dimethyl-1,10-phenanthroline (DmPhen), and 4,7-diphenyl-1,10-phenanthroline (DphPhen), were characterized by ¹H NMR, electronic absorption, and emission spectroscopy and also by cyclic voltammetry. The influence of donor and acceptor substituents on the spectroscopic and electrochemical properties of the Au(III) complexes was revealed.     

Synthesis,characterization, DNA binding studies and in vitro cytotoxicity of platinum(II)-dihalogenido complexes containing bidentate chelating N-donor ligands

Platinum(II) complexes, [Pt(L_x)X₂] (1–6), where X = Br or I and L_x = 2,2′-bipyridine or 1,10-phenanthroline derivatives (5,5′-dimethyl-2,2′-bipyridine (5-Mebpy), 4,4′-dimethyl-2,2′-bipyridine (4-Mebpy), and 5-amino-1,10-phenanthroline (5-NH₂phen)) were prepared. The complexes were characterized by the elemental analysis, mass spectrometry, infrared, and multinuclear (¹H, ¹³C and ¹⁹⁵Pt) 1-D and 2-D NMR spectroscopies, and by single-crystal X-ray analysis of [Pt(4-Mebpy)I₂] (4). All the platinum(II) complexes (1–6) were evaluated for in vitro cytotoxicity against human cancer cell lines A2780 and A2780R, and against non-malignant MRC5 cell line. All the complexes were nontoxic up to the 50 μM concentration, although they were found to readily bind to calf-thymus DNA (CT-DNA), as determined by spectrophotometric titration (K_b ≈ 10⁷ M^?1) and ethidium bromide displacement assay.     

Amphiphilic ruthenium dye as an ideal sensitizer in conversion of light to electricity using ionic liquid crystal electrolyte

The optimization of interfacial charge transfer between the dye and the electrolyte is crucial to the design of dye-sensitized solar cells. In this paper, we address the combined use of an ionic liquid crystal electrolyte and amphiphilic ruthenium dyes in dye-sensitized solar cells. The solar cell with an amphiphilic ruthenium dye [Ru(H₂dcbpy)(tdbpy)(NCS)2] (H₂dcbpy = 4,4′-dicarboxy-2,2′-bipyridine, tdbpy = 4,4′-tridecyl-2,2′-bipyridine), exhibited a short-circuit photocurrent density of 9.1 mA/cm², an open-circuit voltage of 665 mV and a fill factor of 0.58, corresponding to an overall conversion efficiency of 3.51%. We find that increasing dye alkyl chain length to octadecyl from tridecyl results in lower short-circuit photocurrent density and open-circuit voltage, and the suitable dyes for ionic liquid crystal electrolyte differed completely from those used in liquid and ionic liquid electrolyte cells.     

含1,3,4-噁二唑的联吡啶钌(Ⅱ)配合物的合成及光电性质研究(英文)

合成了2个新的含1,3,4-噁二唑官能团的联吡啶配体及其相应的钌髤配合物Ru(CPOD)(dcbpy)(NCS)2(Ru-1)和Ru(DPOD)(dcbpy)(NCS)2(Ru-2)(CPOD=4-羧基-4′-[2-(4-壬氧基苯基)-5-苯基-1,3,4-噁二唑]-2,2′-二联吡啶,DPOD=4,4′-二[2-(4-壬氧基苯基)-5-苯基-1,3,4-噁二唑]-2,2′-二联吡啶,dcbpy=4,4′-二羧基-2,2′-二联吡啶),并通过红外光谱、循环伏安、紫外可见吸收光谱、元素分析和光电流-光电压曲线实验对其结构和光电转化性质进行了表征。这些配合物的最大MLCT态吸收位于555nm,摩尔消光系数可达1.43×104L·mol-1·cm-1。它们的光化学和电化学性质表明:激发态能级与TiO2导带底能级匹配,电子能够注入到TiO2导带中。将它们敏化到纳米晶TiO2电极上,光电转化效率为2.4%。     

A high molar extinction coefficient charge transfer sensitizer and its application in dye-sensitized solar cell

A high molar extinction coefficient charge transfer sensitizer tetrabutylammonium [Ru(4,-carboxylic acid-4′-carboxylate-2,2′-bipyridine)(4,4′-di-(2-(3,6-dimethoxyphenyl)ethenyl)-2,2′-bipyridine)(NCS)₂], is developed which upon anchoring onto nanocrystalline TiO₂ films exhibit superior power conversion efficiency compared to the standard sensitizer bistetrabutylammonium cis-dithiocyanatobis(4,4′-dicarboxylic acid-2,2′-bipyridine)ruthenium(II) (N719). The new sensitizer anchored TiO₂ films harvest visible light very efficiently over a large spectral range and produce a short-circuit photocurrent density of 18.84 mA/cm², open-circuit voltage 783 mV and fill factor 0.73, resulting remarkable solar-to-electric energy conversion efficiency (η) 10.82, under Air Mass (AM) 1.5 sunlight. The Time Dependent Density Functional Theory (TDDFT) excited state calculations of the new sensitizer show that the first three HOMOs have ruthenium t_2g character with sizable contribution coming from the NCS ligands and the π-bonding orbitals of the 4,4′-di-(2-(3,6-dimethoxyphenyl)ethenyl)-2,2′-bipyridine. The LUMO is a π^* orbital localized on the 4,4′-dicarboxylic acid-2,2′-bipyridine ligand.     

Design,synthesis and magnetic properties of a ladderlike complex constructed by secondary building units

A secondary building unit (SBU), [Ni(2,2′-bipy)(5-npa)(H₂O)] _n [where 2,2′-bipy = 2,2′-bipyridine, 5-npa = 5-nitroisophthalic dianion], was synthesized as starting material of a polystep reaction. A ladderlike complex (LLC) Ni(II) coordination polymer, {[Ni(2,2′-bipy)(5-npa)(4,4′bipy)_0.5]·(H₂O)} _n , was constructed by polystep reaction using this SBU. In LLC, two SBUs were cross-linked by 4,4′-bipy [where 4,4′-bipy = 4,4′-bipyridine] forming a 1-D ladderlike structure. The magnetic properties of the LLC and SBU are discussed.     

Conversion of Light into Electricity with Trinuclear Ruthenium Complexes Adsorbed on Textured TiO2 Films

A series of CN-bridged trinuclear Ru complexes of the general structure [RuL₂(μ-(CN)Ru(CN)L₂′)₂] where L is 2,2′-bipyridine-4,4′-dicarboxylic acid and L′ is 2,2′-bipyridine ( 1 )2,2′-bipyridine-4,4′-dicarboxylic acid ( 2 ), 4,4′-dimethyl-2,2′-bipyridine ( 3 ), 4,4′-diphenyl-2,2′-bipyridine ( 4 ), 1,10-phenanthroline ( 5 ), and bathophenanthrolinedisulfonic acid ( 6 ) have been synthesized, and their spectral and electrochemical properties investigated. The two carboxylic functions on the 2,2′-bipyridine ligand L serve as interlocking groups through which the dye is attached at the surface of TiO₂ films having a specific surface texture. The role of these interlocking groups is to provide strong electronic coupling between the π* orbital of the 2,2′-bipyridine and the 3d-wave-function manifold of the conduction band of the TiO₂, allowing the charge injection to proceed at quantum yields close to 100 %. The charge injection and recombination dynamics have been studied with colloidal TiO₂, using laser photolysis technique in conjunction with time-resolved optical spectroscopy. Photocurrent action spectra obtained from photo-electrochemical experiments with these trinuclear complexes cover a very broad range in the visible, making them attractive candidates for solar light harvesting. Monochromatic incident photon-to-current conversion efficiencies are strikingly high exceeding 80% in some cases. Performance characteristics of regenerative cells operating with these trinuclear complexes and ethanolic triiodide/iodide redox electrolyte have been investigated. Optimal results were obtained with complex 1 which gave a fill factor of 75 % and a power conversion efficiency of 11.3% at 520 nm.     

Synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines

Methods for the synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines were developed. The principal route to the required intermediate 2-chloropyridines was based on rearrangements of mono N-oxides of 2,2′-bipyridine, 2,3′-bipyridine, 3,3′-bipyridine, 2,4′-bipyridine and 4,4′-bipyridine with phosphorus oxychloride. Reaction of 3,3′-bipyridine 1-oxide or 2,2′-bipyridine 1-oxide with phosphorus oxychloride gave mixtures of chloro isomers. Reaction with acetic anhydride, 3,3′-bipyridine 1-oxide and 2,2′-bipyridine 1-oxide gave exclusively [3,3′-bipyridine]-2(1H)-one and [2,2′-bipyridine]-6(1H)-one, respectively. 1,2,4-Triazolo[4,3-a]pyridines with pyridinyl groups at the 5,6,7 and 8 positions were synthesized.     

Diels-Alder reaction using a dendritic copper(II) triflate-catalyst: a positive dendritic effect on the chemical yield

A series of dendritic ligands with a 2,2′-bipyridine core was synthesized through the coupling of 4,4′-dihydroxy-2,2′-bipyridine with poly(arylether) dendron in fair yields. The corresponding copper(II) trifluoromethanesulfonate (triflate) dendrimers were applied as a Lewis acid catalyst to the Diels-Alder reaction. A positive dendritic effect on the chemical yields of adducts was observed.     

Synthesis and characterization of lead(II) complexes with substituted 2,2′-bipyridines,trifluoroacetate, and furoyltrifluoroacetonate

Two substituted 2,2′-bipyridine lead(II) complexes, [Pb(5,5′-dm-2,2′-bpy)(tfac)₂] _n (1) (5,5′-dm-2,2′-bpy?=?5,5′-dimethyl-2,2′-bipyridine and tfac?=?trifluoroacetate) and [Pb₂(4,4′-dmo-2,2′-bpy)₂(ftfa)₄] (2) (4,4′-dmo-2,2′-bpy?=?4,4′-dimethoxy-2,2′-bipyridine and ftfa?=?furoyltrifluoroacetonate), have been synthesized and characterized by elemental analysis, IR, ¹H NMR, and ¹³C NMR spectroscopies, thermal behavior, and X-ray crystallography. Complexes 1 and 2 are 1D coordination polymer and dinuclear complex, respectively. The supramolecular features in these complexes are guided by weak directional intermolecular interactions.     

Synthesis,structure, and luminescence of rhenium(I) complexes with substituted bipyridines

Two new rhenium(I) complexes chelated by a substituted 2,2′-bipyridine with general formula Re(CO)₃LCl, where L?=?6?-(2″-methoxyphenyl)-2,2′-bipyridine (L₁ ) and 6?-(4″-diphenylaminophenyl)-2,2′-bipyridine (L₂ ), are synthesized and characterized by IR, NMR, and elemental analysis. Structure of 1 was determined by single-crystal X-ray crystallography, revealing that rhenium is six-coordinate octahedral. The electrochemical, photophysical, and thermal properties of the two rhenium(I) complexes were investigated. Electroluminescent devices were fabricated by doping 1 in polymer blend host of poly(vinylcarbazole) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole using simple solution spin-coating technique. The device exhibits a maximum current efficiency of 2.97?cd?A^?1 and peak brightness in excess of 2390?cd?m^?2.     

Improved Synthesis of 4,4′-Disubstituted-2,2′-Bipyridines

Ruthenium(II) tris(2,2′-bipyridine) complexes show interesting photochemical properties^1. Complexes containing substituents in the 4-and 4′-position of the 2,2′-bipyridine ligand have recently been used in systems which are aimed at the conversion and storage of solar energy^2,3. 2,2′-Bipyridine has a long history as a metal-chelating agent⁴. The use of 4,4′-disubstituted bipyridines as metal-chelating agents so far has been restricted probably because the reported syntheses of these compounds are rather laborious and the yields are low or moderate^5–8.     

Influence of Chelating Groups on the Luminescence Properties of Europium(III) and Terbium(III) chelates in the 2,2′-bipyridine series

Eight different 2,2′-bipyridine derivatives, i.e. 2, 5, 8, 10, 12, 13, 15 , and 19 (Schemes 1 and 2), were prepared to study the influence of the chelating groups on the luminescence properties of their Eu^III and Tb^III chelates. According to our luminescence results, 2,2′-(methylenenitrilo)bis(acetic acid) as well as (methylenenitrilo)bis-(methylphosphonic acid) in 6- and 6′-position of 2,2′-bipyridine is a suitable group when developing luminescent markers for bioaffinity assays based on time-resolved luminescence measurement.     

Mediated glucose enzyme electrodes by cross-linking films of osmium redox complexes and glucose oxidase on electrodes

Here, we report on a novel, versatile approach for the preparation of mediated enzyme electrodes, demonstrated using cross-linked films of glucose oxidase and a range of functionalised osmium complexes on graphite electrodes. Response of enzyme electrodes are optimised by evaluation of glucose response as a function of variation in ratios of [Os(2,2′-bipyridine)₂(4-aminomethyl pyridine)Cl]⁺ redox mediator, polyallylamine support and glucose oxidase enzyme cross-linked using a di-epoxide reagent in films on graphite. Lowering of the redox potential required to mediate glucose oxidation is achieved by synthesis of complexes using (4,4′-dimethyl-2,2′-bipyridine) or (4,4′-dimethoxy-2,2′-bipyridine) as a ligand instead of (2,2′-bipyridine). Enzyme electrodes prepared using the complexes based on dimethoxy- or dimethyl-substituted bipyridines provide glucose oxidation current densities of 30 and 70 μA?cm^?2 at 0.2 and 0.35 V applied potential compared to 120 μA?cm^?2 at 0.45 V for the initial enzyme electrode, under pseudo-physiological conditions in 5 mM glucose, with stability of signals proving inadequate for long-term operation. Current output and stability may be improved by selection of alternate anchoring and cross-linking methodology, to provide enzyme electrodes capable for application to long-term glucose biosensors and anodes in enzymatic fuel cells.

2,2′-联吡啶荧光探针快速检测纳米TiO2薄膜的光催化活性

紫外光照射浸有纳米TiO2薄膜的溶液,能够产生羟自由基,其中羟自由基又能将荧光微弱的2,2′-联吡啶羟基化,其反应体系的荧光增强.利用2,2′-联吡啶作为荧光探针,通过检测其羟基化产物的生成速率来迅速、准确地评价纳米TiO2薄膜的光催化活性.通过与传统的染料法对比,荧光探针法极大地缩短了检测时间,从180 min减少到8 min,得出2,2′-联吡啶荧光探针法评价纳米TiO2薄膜光催化活性具有可行性.     

Molecular wiring of LiMnPO4 (olivine) by ruthenium(II)-bipyridine complexes

LiMnPO₄ (olivine) was surface-modified by two different complexes: Ru-bis(4,4′-diethoxycarbonyl-2,2′-bipyridine)(4,4′-dicarboxylate-2,2′-bipyridine) and Ru-bis(4-carboxylic acid-4′-carboxylate-2,2′-bipyridine)(4,4′-dinonyl-2,2′bipyridine). These complexes have redox potentials of 4.45 and 4.25 V vs. Li/Li⁺, respectively, and are both active for molecular wiring of LiMnPO₄. The surface-confined Ru(II)/Ru(III) redox reaction propagates across the monolayer via hole-hopping, allowing a subsequent chemical delithiation of the underneath olivine towards MnPO₄. The activity of LiMnPO₄ is about half of that of LiFePO₄ (olivine) at similar experimental conditions.     

Polymeric amines and their copper(II) complexes: Catalysts for the hydrolysis of organophosphate esters

Catalysis of the solvolysis of organophosphorus esters by polymers of aliphatic amines, imidazole, pyridine, 2,2′-bipyridine, and their copper(II) complexes was studied using diisopropyl fluorophosphate (DEP) as a model substrate. The polymeric catalysts were synthesized either by (1) derivation of available polymers, including polyethylenimine, polyvinyl amine, polyvinyl alcohol, polystyrene, and poly-4-vinylpyridine or (2) by polymerization of functionalized monomers such as 4(5)-vinylimidazole and 4-vinyl-4′-methyl-2,2′-bipyridine. Polymer hydrophilicity was controlled by partial quaternization of amine groups with different alkyl halides. The greatest catalytic activity was exhibited by copper(II) complexes of polymers containing the 2,2′-bipyridine group. At pH 7.6 and 3.7 × 10^?3M, the most active of these catalysts reduced the half-life of DFP from 800 to 9 min. The rate was largely independent of the pH in the range 6.5–8.5 but was limited by the aqueous solubility of the catalyst. Heterogeneous catalysis by some polymers was observed but was less effective. A Lineweaver-Burk plot of V₀^?1 versus [DFP]^?1 for a soluble polymeric 2,2′-bipyridine-copper(II) catalyst was linear. There was no correlation between catalysis of solvolysis of DFP and the carboxylic ester, p-nitrophenyl acetate.     

Optimized spectrophotometric determination of trace cobalt and manganese by their catalysis of the tiron—hydrogen peroxide reaction

A kinetic—spectrophotometric method for the detemination of traces of cobalt(II) and manganese(II) based on their catalytic effect on the tiron—hydrogen peroxide indicator reaction is proposed. Optimal conditions for determination of Co(II) are deduced from response surface studies, considering the sensitivity and the blank absorbance as responses. The detection limit is 0.05 ng Co ml^?1. The Mn(II)-catalyzed reaction was optimized for 1,10-phenanthroline as the activator by the simplex method and for 2,2′-bipyridine as the activator by response surface methodology on the basis of a previously described mechanistic model of the catalytic reaction. In the presence of 2,2′-bipyridine, the detection limit is 0.2 ng Mn ml^?1. The influence of foreign metal ions on both determinations is discussed and is related in the case of the 2,2′-bipyridine—activated Mn(II)-catalyzed reaction with model generated effects of these metal ions.     

Synthesis of Cytotoxic Iron-Containing Macrocycles Through Unexpected C(sp2)−C(sp2) Bonds Formation

In previous reports, it has been demonstrated that cyclometalated iron(II/III) complexes can be prepared by reacting iron(0) precursors and mercurated or brominated derivatives. However, in this report, the reaction between [Fe₃(CO)₁₂] and mercurated 6-phenyl-2,2′-bipyridine or brominated 2,6-diphenyl-pyridine pincer derivatives led to compounds in which C(sp²)−C(sp²) bonds have been formed between two ligands. A 16-electron iron(II) complex ( 1Cl ) bearing a tetradentate ligand originating from the dimerization of 6-phenyl-2,2′-bipyridine was isolated, while a protonated 14-membered macrocycle with [FeBr₄]⁻ as counterion ( 2 ) was obtained from 2,6-diphenyl-pyridine. Studies by X-ray diffraction crystallography, NMR, UV-vis and cyclic voltammetry confirmed the structures. Additionally, the cytotoxicity of the new compounds toward gastric cancer cell lines was evaluated, and it was established that the presence of the iron(II) center was crucial for an elevated activity.     

Chromium(VI) oxide-mediated oxidation of polyalkyl-polypyridines to polypyridine-polycarboxylic acids with periodic acid

4,4′-Dicarboxy-2,2′-bipyridine was synthesized quantitatively by chromium(VI) oxide-mediated oxidation of 4,4′-dimethyl-2,2′-bipyridine or 4,4′-diethyl-2,2′-bipyridine with periodic acid as the terminal oxidant in sulfuric acid. 5,5′-Dicarboxy-2,2′-bipyridine and 6,6’-dicarboxy-2,2′-bipyridine were also synthesized by the method from the corresponding dimethyl bipyridines in excellent yields. 4,4′,4″-Tricarboxy-2,2′:6′,2″-terpyridine was obtained in 80% yield from 4,4′,4″-triethyl-2,2′:6′,2″-terpyridine, and 4,4′,4″,4′″-tetracarboxy-2,2′:6′,2″:6″,2′″-quaterpyridine was obtained in 72% yield from 4,4′,4″,4′″-tetraethyl-2,2′:6′,2″:6″,2′″-quaterpyridine by the same procedure.