聚醚醚酮酮（PEEKK）和含联苯结构聚醚醚酮酮（PEBEKK）共聚物的SAXS研究

应用一维电子密度相关函数方法，对含不同联苯结构的ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物样品小角Ｘ射线散射（ＳＡＸＳ）去模糊强度分析计算表明：ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物的聚集态结构明显地依赖于共聚物中联苯含量。当联苯含量ｎｂ＝０．３５时，积分不变量Ｑ，长周期Ｌ，平均结晶片层厚ｄ，电子密度差η_ｃ－η_ａ和结晶度Ｗ_（ｃ，ｘ）值为最小，比表面积Ｏ_ｓ为最大。     

含间位取代苯基聚醚酮酮的结晶与晶体结构研究

通过差示扫描法（ＤＳＣ）及广角Ｘ 射线衍射（ＷＡＸＤ）技术研究了含间位取代苯基聚醚酮酮（ＰＥＫｍＫ）的结晶行为与晶体结构．Ｘ 射线结果表明，从熔融态及玻璃态结晶时，ＰＥＫｍＫ只有一种晶型，其晶胞参数为：ａ＝０７６７２ｎｍ，ｂ＝０６１４９ｎｍ，ｃ＝１５９９ｎｍ．ＤＳＣ结果表明，ＰＥＫｍＫ热分析曲线都出现了熔融双峰，低熔融峰（ＤＯＷｎ）热焓占总热焓４～７％，它源于初始结晶形成的同一晶型不同厚度片晶．低熔融峰在２５０℃以上结晶转化成高熔融峰（Ｉ），ＰＥＫｍＫ平衡熔点为２９５℃     

极低密度聚乙烯与其它聚乙烯的共混

从结构角度，用ＤＳＣ，ＷＡＸＤ，ＳＡＸＳ研究了聚乙烯（ＰＥ）家族中极低密度聚乙烯（ＶＬＤＰＥ）与其它ＰＥ的互容性．ＨＤＰＥ／ＶＬＤＰＥ是共晶互容的，以其大量无规部分“溶解”了ＨＤＰＥ的结晶缺陷部分，提高了ＨＤＰＥ的Ｔｃ，Ｔｍ，Ｘｃ，结晶峰半高宽变窄，晶胞参数随组成而有最低值．ＶＬＤＰＥ与ＬＬＤＰＥ结构极为相似，ＤＳＣ及ＷＡＸＤ证明其共混物是共晶相容体系．ＬＤＰＥ／ＶＬＤＰＥ的结晶度符合按组成的计算值，但晶胞参数ａ，ｂ以及晶粒尺寸增大，ＤＳＣ上有分别相应于两组份的两个Ｔｍ；ＶＬＤＰＥ的Ｔｃ，Ｔｍ峰高之和高于按组份的计算值，ＬＤＰＥ的Ｔｍ，Ｔｃ则低于计算值．认为是正如ＬＬＤＰＥ／ＬＤＰＥ，ＬＤＰＥ向充满整个体积的ＶＬＤＰＥ中不断填入，以ＶＬＤＰＥ为晶核而结晶，形成相分离的不相容体系．     

高密度聚乙烯与乙烯丙烯辛烯—1共聚物共混体系的相容性

用ＤＳＣ和ＷＡＸＤ方法研究了高密度聚乙烯／聚（乙烯丙烯辛烯－１）（ＨＤＰＥ／ＥＰＯ）共混体系的结晶性能。共混物的ＤＳＣ曲线皆呈单峰，表明共混体系形成了共晶。晶胞参数ａ及结晶度随共混物组成而变，进一步证明ＨＤＰＥ／ＥＰＯ共混体系的相容性。     

高密度聚乙烯与乙烯丙烯辛烯－1共聚物共混体系的相容性

用ＤＳＣ和ＷＡＸＤ方法研究了高密度聚乙烯／聚（乙烯丙烯辛烯－１）（ＨＤＰＥ／ＥＰＯ）共混体系的结晶性能。共混物的ＤＳＣ曲线皆呈单峰，表明共混体系形成了共晶。晶胞参数ａ及结晶度随共混物组成而变，进一步证明ＨＤＰＥ／ＥＰＯ共混体系的相容性．     

刚性链嵌段共聚物的研究（Ⅳ）—聚醚醚酮／苯酞圈型聚芳醚砜…

以聚醚醚酮（ＰＥＥＫ）和苯酞圈型聚芳醚砜（ＰＤＣ）齐聚物为原料，通过溶液缩聚法制备了ＰＥＥＫ／ＰＤＣ有规嵌段共聚物系列样品。经ＤＳＣ、ＷＡＸＤ、ＴＧＡ、ＤＭＡ等方法研究表明：共聚物没有微相分离现象；其结晶属于简单正交晶系，ＰＤＣ含量对共聚物结晶行为产生很大影响；热稳定性随ＰＤＣ含量增加而明显降低；共聚物具有优异的力学性能，拉伸强度和储能模量高于ＰＥＥＫ。     

刚性链嵌段共聚物的研究（Ⅳ）──聚醚醚酮／苯酞圈型聚芳醚砜有规嵌段共聚物的合成与部分性能

以聚醚醚酮（ＰＥＥＫ）和苯酞圈型聚芳醚砜（ＰＤＣ）齐聚物为原料，通过溶液缩聚法制备了ＰＥＥＫ／ＰＤＣ有规嵌段共聚物系列样品。经ＤＳＣ、ＷＡＸＤ、ＴＧＡ、ＤＭＡ等方法研究表明：共聚物没有微相分离现象；其结晶属于简单正交晶系，ＰＤＣ含量对共聚物结晶行为产生很大影响；热稳定性随ＰＤＣ含量增加而明显降低；共聚物具有优异的力学性能，拉伸强度和储能模量高于ＰＥＥＫ。     

PREPARATION OF BAGASSE XANTHATES （BX） AND NICKEL REMOVAL FROM WASTEWATER BY BX

ＰＲＥＰＡＲＡＴＩＯＮＯＦＢＡＧＡＳＳＥＸＡＮＴＨＡＴＥＳ（ＢＸ）ＡＮＤＮＩＣＫＥＬＲＥＭＯＶＡＬＦＲＯＭＷＡＳＴＥＷＡＴＥＲＢＹＢＸＺｈｏｎｇＣｈａｎｇｇｅｎｇ；ＴａｎｇＤｏｎｇｇｏｎｇ；ＣｈｅｎＱｉａｏｙｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓ...     

A STUDY ON THE KINETICS OF EXCHANGE REACTIONS OF W（Ⅵ） OR Mo（Ⅵ） WITHIN MACROPOROUS ANION EXCHANGE RESIN（D290） PHASE

ＡＳＴＵＤＹＯＮＴＨＥＫＩＮＥＴＩＣＳＯＦＥＸＣＨＡＮＧＥＲＥＡＣＴＩＯＮＳＯＦＷ（Ⅵ）ＯＲＭｏ（Ⅵ）ＷＩＴＨＩＮＭＡＣＲＯＰＯＲＯＵＳＡＮＩＯＮＥＸＣＨＡＮＧＥＲＥＳＩＮ（Ｄ２９０）ＰＨＡＳＥＷａｎｇＹｕｋｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｃ...     

INVESTIGATION OF FRAMEWORK AND EXTRAFRAMEWORK Ti IN TS-1 BY USING RAMAN AND XPS SPECTROSCOPIES

ＩＮＶＥＳＴＩＧＡＴＩＯＮＯＦＦＲＡＭＥＷＯＲＫＡＮＤＥＸＴＲＡＦＲＡＭＥＷＯＲＫＴｉＩＮＴＳ１ＢＹＵＳＩＮＧＲＡＭＡＮＡＮＤＸＰＳＳＰＥＣＴＲＯＳＣＯＰＩＥＳＣｈｅｎｇＳｈｉｂｉａｏ，ＷｕＷｅｉ，ＪｉｎＺｅｍｉｎｇ，ＭｉｎＥｎｚｅ（Ｒｅｓｅａｒ...     

Non-isothermal crystallization kinetics of continuous glass fiber-reinforced poly(ether ether ketone) composites

Current studies on crystallization kinetics for glass fiber-reinforced poly(ether ether ketone) mainly focused on short glass fiber-reinforced composites and their isothermal crystallization. It is worth noting that continuous glass fiber-reinforced poly(ether ether ketone) composite (CGF/PEEK) possesses relatively higher mechanical performance than short fiber-reinforced PEEK under high temperature. Here, for the first time, we investigate the non-isothermal crystallization kinetics and melting behavior of CGF/PEEK by differential scanning calorimetry at four different cooling rates. By evaluating the crystallite size of CGF/PEEK using X-ray diffraction, it is found that with the decreasing cooling rate, the crystallite size distribution evolves more uniform, and the size of crystallites enlarges. Besides, by systematical analysis, we find the modified Avrami equation can well describe crystallization behavior of the CGF/PEEK. The higher Avrami value of CGF/PEEK than pure PEEK indicates that CGF could introduce a more complex geometry effect on the crystallization. The addition of CGF greatly reduces the absolute value of crystallization activation energy of PEEK, suggesting that CGF can reduce the nucleation energy barrier. The obtained results illustrate that CGF can accelerate the nucleation rate due to heterogeneous nucleation while reduce the growth rate due to retarded polymer chain mobility. And the cooling conditions can influence crystal growth and morphology.

     

Molecular orientation and microstructure of roller-drawn sheets of poly(ether ether ketone)

The rolling and roller-drawing of poly(ether ether ketone) (PEEK) sheets were carried out in the roller temperature range of 165-262°C. The crystal orientation functions of the PEEK sheets were determined from the azimuthal intensity distribution of wide-angle x-ray diffraction, and the orientation behavior in the amorphous region was characterized by the measurements of sonic modulus and polarized fluorescence. The orientation functions increase monotonically with increasing draw ratio. The orientation function in the amorphous region is close to that of crystal orientation function of the same sample. The long period evaluated by small-angle x-ray scattering is almost constant over the draw ratio range studied, whereas the crystallite size along the 001 plane, D₀₀₁ tends to increase with increasing draw ratio. The value of the crystallite size exceeds the product of the crystallinity and the long period. The result suggests the formation of the crystalline linkages that penetrate the periodic layers. © 1994 John Wiley & Sons, Inc.     

乙烯-α-烯烃共聚物的结晶性能及其临界序列结晶长度的研究

本文用DSC、WAXD及偏光显微镜(PLM)方法,研究了化学反应法催化剂合成的乙烯-α-烯烃共聚物的结晶性能及其临界序列结晶长度。结果表明,随共聚物中α-烯烃含量增大,共聚物的微晶尺寸、结晶度及熔点均逐渐减小,而晶胞参数增大。变化的辐度戊烯>辛烯。共聚物的临界结晶序列长度(n)和k值均戊烯<辛烯。上述结果表明影响支链进入晶格的主要因素是α-烯烃支链长度和结构。     

Insights into post-annealing and silver doping effects on the internal microstructure of ZnO nanoparticles through X-ray diffraction probe

ZnO nanoparticles were synthesized via Pechini method at various post-annealing temperatures (400°, 500°, and 600 °C) and silver doping concentrations (Zn:Ag molar ratios of 30, 20, and 10). Multifarious microstructural features including crystallite size, size-strain based broadening, residual stress, preferential orientation, crystallinity degree, lattice parameters, unit cell variation, and stacking fault probability were surveyed through phase analysis, Williamson-Hall plot, texture coefficient and unit cell calculations. X-ray probing verified good crystallinity with a hexagonal close pack Wurtzite morphology. Williamson-Hall analysis exhibited distributions of crystallite size and microstrain as well as their contributions on the line broadening of the host ZnO and guest Ag phases upon annealing-doping treatments. Textural analysis revealed the alteration in anisotropic crystallinity of the host phase and transformation of the preferred directions, (100) and (101), as function of annealing-doping processes. Besides, while guest Ag phase was shown to be polycrystalline with randomly orientated crystals at moderate concentration with respect to thermal treatment, preferential orientation went through a major change, (220) to (111), with increment in Ag loadings. Under identical synthetic conditions, the distinction in the lattice constants and unit cell variation between pure and doped ZnO nanoparticles was enforced and results verified major impressionability via annealing and doping factors.     

聚对苯二甲酸乙二酯的熔融双峰

未拉伸聚对苯二甲酸乙二酯(PET)、单轴拉伸PET、双轴拉伸PET在不同条件下热处理,并进行了DSC热分析、X-射线衍射分析、红外分析。结果表明:熔融双峰现象起因于DSC等速升温过程中PET的部分熔融和重结晶;低温峰是等温热处理过程中形成的不完善微晶的熔融峰,高温峰是重结晶后较完善的微晶的熔融峰;在等速升温过程中,PET晶胞参数不变、晶格完善、晶粒增大,并且规则折迭链增加,但晶粒随温度增大的过程中出现低谷。     

THE DOUBLE MELTING PEAKS OF POLY(ETHYLENE TEREPHTHALATE)

Three sets of PET samples, comprising original (undrawn), uniaxially drawn and biaxially ones, after annealed at 230°, 240°and 250℃respectively, were subjected to DSC thermal analysis, X-ray diffraction analysis and IR analysis. The results indicate that the phenomenon of double melting peaks during DSC analysis is due to the partial melting and recrystallization of the crystallite at the moment of thermal scanning. The lower temperature peak, which varies slightly according to annealing condition, corresponds to the melting of imperfect crystallite, and the higher temperature peak corresponds to the melting of better organized crystallite. In the course of temperature scanning, the unit cell parameters of PET remains unchanged while the crystals turn to better crystal lattice, greater crystal size and more regular folding.We also found that there is a slight reduction in crystal size between the two melting peaks, and an explanation is suggested for this phenomenon.     

Crystallographic characterization of naturally occurring aragonite and calcite phase: Rietveld refinement

This research has comprehended the crystallographic characterization of two naturally occurring calcium carbonates phases e.g. aragonite and calcite in Pila globosa (P. globosa) and eggshells respectively. The tools employed to confirm the phases of aragonite and calcite were X-ray diffractoion (XRD) and Fourier Transform Infrared (FT-IR) spectroscopy. Several important crystallographic parameters like crystallite size, lattice parameters, dislocation density, crystallinity index, microstrain, volume of the unit cell, relative intensity of a certain plane, preference growth, and specific surface area were taken into account while assessing the desired aragonite and calcite phases. A number of well-known models e.g. Straight-line model of the Scherrer model, the Monshi-Scherrer model, the Williamson-Hall model, the Sahadat-Scherrer model, and the three-peak model aided the estimation of crystallite size. In all the cases, the observed crystallite size of calcite was larger than that of aragonite. The percentage of calcite and aragonite in eggshell and P. globosa were assessed by Rietveld refinement method. Observed results revealed that 97.4% calcite and 2.6% aragonite phases are present in eggshell while in P. globosa these percentages exist inversely, i.e. 93.2% aragonite and 6.8% calcite phases.     

Crystal structure and crystallinity of poly(aryl ether biphenyl ether ketone ketone)

The crystal structure of poly(aryl ether biphenyl ether ketone ketone) (PEDEKK) was determined to comprise a two-chain orthorhombic unit cell with dimensions a = 0.778 nm, b = 0.606 nm and c = 2.375 nm by using wide-angle X-ray diffraction (WAXD). According to the orthorhombic system, the 12 reflections of this polymer were indexed. The crystallite size increases with increasing the crystallization temperature. The results of the degree of crystallinity (W_c,x) calculated from WAXD were compatible with those from density (W_c,d) and calorimetry (W_c,h) measurements.     

聚醚醚酮表面的亲水改性和胶原蛋白固定化

采用紫外光接枝法对聚醚醚酮(PEEK)表面进行化学修饰和生物分子固定化.首先向PEEK表面引入亲水性的丙烯酰胺,并以此为反应位点通过戊二醛将胶原和胶原蛋白固定在PEEK表面.用接触角测定仪、扫描电镜、荧光标记和X射线光电子能谱等对改性薄膜进行了表征.结果表明,PEEK上丙烯酰胺的接枝密度高达50.9μg/cm~2;改性薄膜表面浸润性显著提高,水接触角最低降至(22±3)°.荧光标记胶原固定的PEEK薄膜荧光发射光谱强度最高,并在X射线光电子能谱中检测到N元素,表明胶原已固定化,固定胶原蛋白的浓度为10.2μg/cm~2.     

Shift of Optical Absorption Edge in Sol-Gel Derived Transparent BaTiO3 Gels During Aging

Transparent barium titanate (BaTiO₃) wet gels synthesized by sol-gel processing using high-concentration Ba,Ti-alkoxide solution (1.0 mol/l) were subjected to optical measurements, X-ray diffraction analysis and transmission electron microscope observations. A systematic shift of the optical absorption edge was observed for the transparent BaTiO₃ wet gels shrinking during aging at 30 and 50°C, while no shift was observed for the wet gels aged at 5°C. The crystallinity and crystallite size of the gels increased with increasing aging time and temperature. The shift of the optical absorption edge of the BaTiO₃ gels during aging was found to have a close relation to an increase in the crystallite size of the gels.