N-bromosuccinimide-fluorescein system for the determination of protein by flow injection chemiluminescence

A method for flow injection with chemiluminescence (CL) detection has been developed for the determination of proteins. It is based on the luminescence of the N-bromosuccinimide-fluorescein-protein system, where fluorescein is used as an energy transfer reagent in alkaline medium. The CL of the system is strongly enhanced by hexadecyl trimethyl ammonium bromide. Optimum conditions and possible mechanisms have been investigated. Under optimum experimental conditions, the linear range is from 0.4 to 40 µg·mL^?1 for egg albumin, 0.2 to 20 µg·mL^?1 for bovine serum albumin, and from 1 to 100 µg·mL^?1 for bovine hemoglobin. The detection limits are 37, 62, and 240 ng·mL^?1, respectively.     

Nonextractive Trace Level Simultaneous Determination of Mercury(II) and Zinc(II) in Environmental Samples with 2‐(5‐Bromo‐2‐pyridylazo)‐5‐diethylaminophenol and Cetylpyridinium Chloride

Abstract

A simple, rapid, selective, and sensitive method for the derivative spectrophotometric determination of Hg(II) and its simultaneous determination in the presence of Zn(II) using 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol in the presence of cetylpyridinium chloride, a cationic surfactant, has been developed. The molar absorption coefficient and analytical sensitivity of the 1∶1 Hg(II) complex at 558 nm (λ_max) are 5.78×10⁴ L mol^?1 cm^?1 and 0.67 ng mL^?1, respectively. The detection limit of Hg(II) is 1.40×10^?2 ng mL^?1, and Beer's law is valid in the concentration range 0.05–2.40 µg mL^?1. Overlapping spectral profiles of Hg(II) and Zn(II) complexes in zero‐order mode interfere in their simultaneous determination. However, 0.10–2.00 µg mL^?1 of Hg(II) and 0.065–0.650 µg mL^?1 of Zn(II), when present together, can be simultaneously determined at zero cross point of the derivative spectrum, without any prior separation. The relative standard deviation for six replicate measurements of solutions containing 0.134 µg mL^?1 of Hg(II) and 0.620 µg mL^?1 of Zn(II) is 1.72 and 1.47%, respectively. The proposed method has successfully been evaluated for trace level simultaneous determination of Hg(II) and Zn(II) in environmental samples.     

Determination of Three Nonsteroidal Anti-Inflammatory Drugs in Human Plasma by LC Coupled with Chemiluminescence Detection

A simple and sensitive method was developed for the determination of three nonsteroidal anti-inflammatory drugs (NSAIDs)—ibuprofen, naproxen and fenbufen in human plasma. The method involved in column liquid chromatographic separation and chemilumenescence (CL) detection based on the CL reaction of NSAIDs, potassium permanganate (KMnO₄) and sodium sulfite (Na₂SO₃) in sulfuric acid (H₂SO₄) medium. The chromatographic separation was carried out using a reversed-phase C₁₈ column, which allowed the selective determination of the three medicines in the complicated samples. The special features of the CL detector provided lower LOD for determination than that of existing chromatographic alternatives. The results indicated that the linear ranges were 0.01–10.0 μg mL^?1 for ibuprofen, 0.001–1.0 μg mL^?1 for naproxen, and 0.01–10.0 μg mL^?1 for fenbufen. The limits of detection were 0.5 ng mL^?1 for ibuprofen, 0.05 ng mL^?1 for naproxen and 0.5 ng mL^?1 for fenbufen (S/N = 3). All average recoveries were in the range of 90.0–102.3%. Finally, the method had been satisfactorily applied for the determination of ibuprofen, naproxen and fenbufen in human plasma samples.     

Colorimetric Determination of Lead Using Gold Nanoparticles

A combined homogeneous assay and colorimetric determination method using gold nanoparticles was developed for rapid determination of lead(II) in contaminated natural waters. The presence of lead(II) in the colloidal gold suspension causes a change in the absorbance of the suspension. An increase in the absorption property at 595 nm is accompanied by a change in the size of the gold nanoparticles. High concentrations of lead cause aggregation of the gold colloids. Colloidal gold nanoparticles were synthesized using tannic acid as the reducing agent; this reagent allowed selective determination of lead in 10 µL of water, with a detection limit of 310 ng mL^?1 with an analysis time of 5 min. The coefficient of variation for lead(II) within the working range of the assay (520 ng mL^?1–13 µg mL^?1) varied from 1.3% to 9.2%. The limit of detection using this method with a sample volume of 50 µL was 60 ng mL^?1. The coefficient of variation for lead over the working range of the determined concentrations (80 ng mL^?1–25 µg mL^?1) varied from 0.2% to 9.3%, while the values for the inter-day assay (n = 8) were less than 10%. The method was employed for the analysis of river, lake, marsh, and spring water; the recovery of lead was determined to be 72.5%–130% for 10 µL of water and 93.6%–114.7% for 50 µL.     

Simultaneous Estimation of Atorvastatin Calcium, Ramipril and Aspirin in Capsule Dosage Form by RP-LC

A simple, sensitive, precise and accurate reversed phase liquid chromatographic method has been developed for the simultaneous estimation of atorvastatin (AT) calcium, ramipril (RA) and aspirin (AS) from capsule dosage form. The method was developed using a Phenomenex Luna C₁₈ (250 mm, 4.6 mm i.d., 5 µm) column with a mobile phase consisting of 0.1%, orthophosphoric acid buffer:acetonitrile:methanol (45:50:5 v/v/v), pH 3.3, at a flow rate of 1 mL min^?1. Detection was carried out with ultra-violet detection at 210 nm. The retention times were about 12.19, 2.35, and 3.95 min for AT calcium, RA and AS, respectively. The developed method was validated for linearity, accuracy, precision, limit of detection, limit of quantitation and robustness. The linearity ranges were 1–6 µg mL^?1 for AT calcium, 0.5–3 µg mL^?1 for RA and 7.5–45 µg mL^?1 for AS with mean recoveries of 100.59 ± 0.68, 100.62 ± 0.83 and 100.49 ± 0.73% for AT calcium, RA and AS, respectively. Limit of detection obtained were 29.85 ng mL^?1 for AT calcium, 4.71 ng mL^?1 for RA and 85.13 ng mL^?1 for AS. Impurity of salicylic acid was found in capsule dosage form at the retention time of about 4.84 min. The proposed method can be used for the estimation of these drugs in combined dosage forms.     

N-(1-Naphthyl)ethylenediamine, a New UV Labeling Reagent Used for LC Determination of Valproic Acid in Human Plasma

A high performance liquid chromatography method is presented for the determination of valproic acid levels in human plasma. The method was based on pre-column derivatization using N-(1-naphthyl)ethylenediamine as a new labeling agent. The calibration curve was linear in the investigated concentration range between 0.1 and 100 μg mL^?1 and showed good accuracy and reproducibility. The assay provided a limit of quantification of 0.1 μg mL^?1 for valproic acid and a limit of detection of 10 ng mL^?1, respectively. The presented method was successfully applied to the determination of valproic acid levels in plasma after oral administration of 600 or 800 mg of sodium valproate.     

Determination of Three Nonsteroidal Anti-Inflammatory Drugs in Human Plasma by LC Coupled with Chemiluminescence Detection

A simple and sensitive method was developed for the determination of three nonsteroidal anti-inflammatory drugs (NSAIDs)—ibuprofen, naproxen and fenbufen in human plasma. The method involved in column liquid chromatographic separation and chemilumenescence (CL) detection based on the CL reaction of NSAIDs, potassium permanganate (KMnO₄) and sodium sulfite (Na₂SO₃) in sulfuric acid (H₂SO₄) medium. The chromatographic separation was carried out using a reversed-phase C₁₈ column, which allowed the selective determination of the three medicines in the complicated samples. The special features of the CL detector provided lower LOD for determination than that of existing chromatographic alternatives. The results indicated that the linear ranges were 0.01–10.0 μg mL⁻¹ for ibuprofen, 0.001–1.0 μg mL⁻¹ for naproxen, and 0.01–10.0 μg mL⁻¹ for fenbufen. The limits of detection were 0.5 ng mL⁻¹ for ibuprofen, 0.05 ng mL⁻¹ for naproxen and 0.5 ng mL⁻¹ for fenbufen (S/N = 3). All average recoveries were in the range of 90.0–102.3%. Finally, the method had been satisfactorily applied for the determination of ibuprofen, naproxen and fenbufen in human plasma samples.

     

A New Flow‐Injection Chemiluminescence Method for the Determination of Acyclovir and Gancyclovir

Abstract

A rapid and sensitive flow‐injection chemiluminescence (FI‐CL) method, which is based on the CL intensity that generated from the redox reaction of Ce(IV)‐rhodamine B in H₂SO₄ medium, for the determination of acyclovir and gancyclovir is described. For acyclovir, the determination range is 3×10^?8 g mL^?1–7×10^?5 g mL^?1, with 1.56×10^?8 g mL^?1 as its determination limit. During 11 repeated measurements for 1×10^?6 g mL^?1 acyclovir, the relative standard deviation was 2.08%. For gancyclovir, the determination range was 5×10^?8 g mL^?1–7×10^?5 g mL^?1, with 2.35×10^?8 g mL^?1 as its determination limit. The relative standard deviation is 2.83% with 11 repeated measurements of 1×10^?6 g mL^?1 gancyclovir. This method can be successfully used to determine the content of acyclovir and gancyclovir in injections, acyclovir in eye drops, and, maybe, also for other ciclovirs.     

Determination of Vitamin A in Infant Milk-Based Formulas and Pharmaceutical Formulations Using Flow Injection with Ce(IV)–Na2SO3 Chemiluminescence Detection

A rapid and simple flow injection (FI) method is reported for the determination of vitamin A (retinol) based on its strong enhancing effect on the Ce(IV)–Na₂SO₃ chemiluminescence (CL) reaction in an acidic solution. The effect of key chemical and physical parameters (i.e., reagent concentrations, flow rate, and sample volume) was optimized and potential interferences examined. Under the selected experimental conditions, a linear calibration was obtained between the CL intensity and vitamin A concentration in the range 0.1–8.0 µg mL^?1 (r ²  = 0.9986, n = 8). The limit of detection (3 s x blank) was 0.01 µg mL^?1 retinol (n = 6) and the relative standard deviation (RSD) for 0.25 µg mL^?1 retinol was 2.3% (n = 10) with a sampling rate of 180 h^?1. The method was successfully applied to infant milk-based formulas and pharmaceutical formulations and the results were not significantly different at 95% confidence interval with those obtained by using a spectrophotometric reference method. The possible CL mechanism is also discussed briefly supporting with UV-visible, fluorescence, and CL spectra.     

Improved Multianalyte Determination of the Intense Sweeteners Aspartame and Acesulfame‐K with a Solid Sensing Zone Implemented in an FIA Scheme

Abstract

A multianalyte flow‐through sensor is proposed for the simultaneous determination of aspartame (AS) and acesulfame‐K (AK) in tabletop sweeteners. The procedure is based on the transient retention of AK in the ion exchanger Sephadex DEAE A‐25 placed in the flow‐through cell of a monochannel flow injection analysis (FIA) set‐up using pH 2.70 ortophosphoric acid/sodium dihydrogen phosphate buffer 0.06 M as carrier. In these conditions AS is very weakly retained, which makes it possible to measure the intrinsic ultraviolet (UV) absorbance of first AS and then AK after desorption by the carrier itself. The applicable concentration range, the detection limit, and the relative standard deviation were the following: for AS, from 10 to 100 µg mL^?1; 5.65 µg mL^?1; 3.4% (at 50 µg mL^?1); and for AK, between 40 and 100 µg mL^?1; 11.9 µg mL^?1 and 1.61% (at 50 µg mL^?1). The method was applied and validated satisfactorily for the determination of AS and AK blends in tabletop sweeteners. The results were compared against an HPLC reference method.     

Application of organo-nanoclay as a solid sorbent for rhodium complex separation and preconcentration

An organo-nanoclay is used as a new, easily accessible, and stable solid sorbent for the preconcentration of trace amounts of rhodium ions from aqueous solution, this followed by its determination by flame atomic absorption spectrometry (FAAS). Rh(III) ion was first complexed with 2,3,5,6-tetra(2-pyridyl) pyrazine (TPPZ) at pH values between 3.0 and 4.7, and then the complex was then adsorbed onto the nanoclay. The rhodium ions were eluted from the sorbent with HCl. The rhodium in the effluent was determined by FAAS. The linear analytical range is between 0.14 ng mL^?1 and 20.0 μg mL^?1 in the initial solution, the relative standard deviation at 2.0 μg mL^?1 of rhodium is 2.6% (n?=?8), the detection limit is 0.03 ng mL^?1, and the preconcentration factor is 140. Experimental parameters including the pH, eluent type, interference by other ions and breakthrough volume were optimized. The method was applied to the determination of rhodium in water, road dust and synthetic samples.     

HPLC and UPLC Methods for the Simultaneous Determination of Enalapril and Hydrochlorothiazide in Pharmaceutical Dosage Forms

High efficiency and less elution are the basic requirements of high-speed chromatographic separation. In this study, a new gradient reverse phase chromatographic methods were developed using HPLC and UPLC systems for simultaneous determination of enalapril maleate (ENL) and hydrochlorothiazide (HCZ) in pharmaceutical dosage forms. The chromatographic separations of ENL and HCZ were achieved on a Waters μ-Bondapak C 18, (300 × 3.9 mm, 10 μm) and Waters Acquity BEH C18 (100 × 2.1 mm, 1.7 μm) columns for HPLC within 5.30 min and UPLC within a short retention time of 1.95 min, respectively. A linear response was observed over the concentration range 0.270–399 μg mL^?1 of ENL, 0.260–399 μg mL^?1 of HCZ for HPLC system and 0.270–399 μg mL^?1 of ENL and 0.065–249 μg mL^?1 of HCZ for UPLC system. Also, limit of detection for ENL was 1.848 ng mL^?1 and 31.477 ng mL^?1 for HCZ, 2.804 ng mL^?1 for ENL and 2.943 ng mL^?1 for HCZ using HPLC and UPLC, respectively. The proposed methods were validated according to ICH guideline with respect to precision, accuracy, and linearity. Forced degradation studies were also performed for both compounds in bulk drug samples to demonstrate the specificity and stability indicating power of the HPLC method. Comparison of system performance with conventional HPLC was made with respect to analysis time, efficiency, and resolution.     

Determination of Pantoprazole, Rabeprazole, Esomeprazole, Domperidone and Itopride in Pharmaceutical Products by Reversed Phase Liquid Chromatography Using Single Mobile Phase

A simple, sensitive, and precise high performance liquid chromatographic method for the analysis of pantoprazole, rabeprazole, esomeprazole, domperidone and itopride, with ultraviolet detection at 210 nm, has been developed, validated, and used for the determination of compounds in commercial pharmaceutical products. The compounds were well separated on a Hypersil BDS C18 reversed-phase column by use of a mobile phase consisting of 0.05 M, 4.70 pH, potassium dihydrogen phosphate buffer - acetonitrile (720:280 v/v) at a flow rate of 1.0 mL min^?1. The linearity ranges were 400–4,000 ng mL^?1 for pantoprazole, 200–2,000 ng mL^?1 for rabeprazole, 400–4,000 ng mL^?1 for esomeprazole, 300–3,000 ng mL^?1 for domperidone and 500–5,000 ng mL^?1 for itopride. Limits of detection (LOD) obtained were: pantoprazole 147.51 ng mL^?1, rabeprazole 65.65 ng mL^?1, esomeprazole 131.27 ng mL^?1, domperidone 98.33 ng mL^?1 and itopride 162.35 ng mL^?1. The study showed that reversed-phase liquid chromatography is sensitive and selective for the determination of pantoprazole, rabeprazole, esomeprazole, domperidone and itopride using single mobile phase.     

An Accurate Assay for Simultaneous Determination of Irinotecan and Its Active Metabolite SN-38 in Rat Plasma by LC with Fluorescence Detection

An accurate LC method was developed and validated for simultaneous determination of irinotecan (CPT-11) and its active metabolite SN-38 in rat plasma. Plasma samples were pretreated with 0.4 g mL^?1 sodium dodecyl sulfate to inactive the carboxylesterase and avoid the conversion of CPT-11 to SN-38. Chromatographic separation was achieved on a Diamaonsil C₁₈ column using acetonitrile–50 mM phosphate buffered solution (30:70, v/v) at pH 4.0 as the mobile phase with the flow rate of 1 mL min^?1. The linear quantitation ranges for CPT-11 and SN-38 were 5.05–3,030 and 3.15–315 ng mL^?1 with r ² > 0.99, respectively. The lower limit of quantification (LLOQ) was 2.33 ng mL^?1 for CPT-11 and 0.26 ng mL^?1 for SN-38 with intra- and inter-day relative standard deviation of <12% and the accuracy values of >90%. The method was proved to be accurate and sensitive enough and was successfully applied to a pharmacokinetic study of CPT-11 in rats.     

Chemiluminometric Determination of the Pesticide Pirimicarb by a Flow Injection Analysis Assembly

Abstract

A flow injection (FI) method is described for the determination of pirimicarb. It was found that an enhanced chemiluminescence (CL) signal is obtained when employing the luminol–H₂O₂–horseradish peroxidase (HRP) system. Under the optimum experimental conditions, the enhanced CL intensity was linear with the concentration 4.25–30.75 ng mL^?1 (r = 0.997, n = 8) with a relative standard deviation of 0.99%, containing 12.75 ng mL^?1 (n = 8). The limit of detection of the investigated compound was 0.12 ng mL^?1. The method shows a moderate selectivity against other pesticides (Amitrole, Atrazine, 2,4,5-T, Dichlorprop, and Metamidophos).The proposed method was sensitive, simple, rapid, and successfully applied to the determination of pirimicarb when it is applied in freshwater; the mean recoveries were 98.3–118.5%.     

Flow Injection Determination of Humic Acid with Chemiluminescence Detection

Abstract

A very sensitive and fast flow injection chemiluminescence method, based on the oxidation of humic acid (HA) by 1,3‐dibromine‐5,5‐dimethylhydantion in the presence of glycine in alkaline medium, was developed for the determination of trace humic acids in water. A wide calibration range from 0.001 to 1.0 µg mL^?1 was obtained at the optimized conditions and the detection limit was as low as 0.5 ng mL^?1 of humic acids. Most of the foreign substances tested showed relatively high tolerance levels and the proposed method was successfully applied to the determination of humic acid in river water and tap water.     

Determination of Poisonous Trace Element Thallium(I) by Kinetic Catalytic Reaction

Abstract

A effective and simple determination of poisonous trace element thallium(I) by means of kinetic catalytic reaction is proposed. The method is based on a catalytic effect of thallium(I) on a luminol-hydrogen peroxide system. Three different kinds of surfactants, cetrimonium bromide (CTMAB), sodium dodecyl sulphate (SDS), and Tween-80, are also investigated to improve the detection sensitivity. In optimum conditions, a highly selective and sensitive method for detecting trace thallium(I) has been established. The detection limit is 0.0073 µg · mL^?1, the relative standard deviation for six determinations of 0.04 µg · mL^?1 thallium(I) is less than 4.0%, and the linear range of determination is 0.02–0.1 µg · mL^?1.     

The Determination of Perphenazine by a New Simple Flow‐Injection Chemiluminescence Method

Abstract

A rapid and simple flow‐injection chemiluminescence (CL) method is described for the determination of perphenazine, which is based on the CL intensity that generated from the redox reaction of Ce (IV)-perphenazine in HNO₃ medium is proportional to the perphenazine concentration without any sensitizers. The proposed method allows the determination range within 1.0×10^?7–7.0 ×10^?5 g mL^?1 with a detection limit of 8.0×10^?8 g mL^?1, and it has been successfully applied to the determination of the perphenazine in pharmaceutical tablet compared well with the official method.     

Simultaneous Determination of Paracetamol and Caffeine in Human Plasma by LC–ESI–MS

A rapid, selective and convenient liquid chromatography–mass spectrometric method for the simultaneous determination of paracetamol and caffeine in human plasma was developed and validated. Analytes and theophylline [internal standard (I.S.)] were extracted from plasma samples with diethyl ether-dichloromethane (3:2, v/v) and separated on a C₁₈ column (150 × 4.6 mm ID, 5 μm particle size, 100 Å pore size). The mobile phase consisted of 0.2% formic acid–methanol (60:40, v/v). The assay was linear in the concentration range between 0.05 and 25 μg mL^?1 for paracetamol and 10–5,000 ng mL^?1 for caffeine, with the lower limit of quantification of 0.05 μg mL^?1 and 10 ng mL^?1, respectively. The intra- and inter-day precision for both drugs was less than 8.1%, and the accuracy was within ±6.5%. The single chromatographic analysis of plasma samples was achieved within 4.5 min. This validated method was successfully applied to study the pharmacokinetics of paracetamol and caffeine in human plasma.     

Determination of Alkylphenols in Water by Dispersive Liquid–Liquid Microextraction Based on Solid Formation without a Disperser

Dispersive liquid–liquid microextraction based on solid formation without a disperser combined with high-performance liquid chromatography has been developed for the determination of 4-tert-butylphenol, 4-n-nonylphenol, and 4-tert-octylphenol. This method is rapid, easy, and uses only 10 µL of a low toxicity organic solvent (1-hexadecanethiol) for the extraction solvent and no disperser solvent. The extraction time and centrifugation time require less than 10 min. The linear range was 1–500 ng mL^?1 for 4-tert-butylphenol, 2–1000 ng mL^?1 for 4-tert-octylphenol, and 5–500 ng mL^?1 for 4-n-nonylphenol with r² ≥ 0.9986. The detection limits were between 0.2 and 1.5 ng mL^?1. The recoveries of lake and river water samples were in the range of 79% to 108%, and the relative standard deviations were 5% to 10%.