基于酶标抗体和媒介体共吸附于金胶壳聚糖膜的PSA免疫传感器的制备

本文研制了一种用金胶壳聚糖仿生膜来同时固定四甲基联苯胺（TMB）和酶标抗体的新型电化学免疫传感器,用于检测血清肿瘤标志物前列腺特异性抗原（PSA）的含量。固定的TMB作为电子传递媒介体,在扫速小于45 mV/s时,电极表现为一个表面控制过程,而在扫速大于45 mV/s时则表现为一个扩散控制过程。将固定有酶标抗体和TMB的免疫传感器与待测PSA抗原一起培育,在该传感器上形成的免疫复合物通过TMB-H₂O₂-HRP电化学体系进行了测定。在优化实验条件下,PSA的线性检测范围为5-30 ng·mL^-1,检测限为1.0 ng·mL^-1。该PSA免疫传感器制备方法简单,成本低廉,具有较好的稳定性和重现性。     

Ultrasensitive amperometric immunosensor for the determination of carcinoembryonic antigen based on a porous chitosan and gold nanoparticles functionalized interface

An immunosensor has been fabricated for direct amperometric determination of carcinoembryonic antigen. It is based on a biocompatible composite film composed of porous chitosan (pChit) and gold nanoparticles (GNPs). Firstly, a pChit film was formed on a glassy carbon electrode by means of electrodeposition. Then, thionine as a redox probe was immobilized on the pChit film modified electrode using glutaraldehyde as a cross-linker. Finally, GNPs were adsorbed on the electrode surface to assemble carcinoembryonic antibody (anti-CEA). The surface morphology of the pChit films was studied by means of a scanning electron microscope. The immunosensor was further characterized by cyclic voltammetry and electrochemical impedance spectroscopy. The electrochemical behaviors and factors influencing the performance of the resulting immunosensors were studied in detail. Results showed that the pChit films can enhance the surface coverage of antibodies and improve the sensitivity of the immunosensor. Under optimal conditions, the immunosensor was highly sensitive to CEA with a detection limit of 0.08 ng·mL^?1 at three times the background noise and linear ranges of 0.2～10.0 ng·mL^?1 and 10.0～160 ng·mL^?1. Moreover, the immunosensor exhibited high selectivity, good reproducibility and stability.     

A Highly Sensitive Electrochemical Impedance Spectroscopy Immunosensor for Determination of 1‐Pyrenebutyric Acid Based on the Bifunctionality of Nafion/Gold Nanoparticles Composite Electrode

A simple, highly sensitive and label‐free electrochemical impedance spectroscopy (EIS) immunosensor was developed using Nafion and gold nanoparticles (nano‐Au/Nafion) composites for the determination of 1‐pyrenebutyric acid (PBA). Under the optimal conditions, the amount of immobilized antibody was significantly improved on the nano‐Au/Nafion electrode due to the synergistic effect and biocompatibility of Nafion film and gold nanoparticles composites. The results showed that the sensitivity and stability of nano‐Au/Nafion composite electrode for PBA detection were much better than those of nano‐Au modified glassy carbon electrode (nano‐Au/GCE). The plot of increased electron transfer resistances (R_ets) against the logarithm of PBA concentration is linear over the range from 0.1 to 150 ng·mL^?1 with the detection limit of 0.03 ng·mL^?1. The selectivity and accuracy of the proposed EIS immunosensor were evaluated with satisfactory results.     

Gold nanoparticle-labeled detection antibodies for use in an enhanced electrochemical immunoassay of hepatitis B surface antigen in human serum

The application of gold nanoparticle-based electrochemical immunoassays have been extensively studied for the detection of hepatitis B surface antigen (HBsAg), but most often they exhibit low sensitivity. We describe the fabrication of a new electrochemical immunoassay for signal amplification of the antigen-antibody reaction combined with the nanogold-based bio-barcode technique. Hepatitis B surface antibody (HBsAb) was initially immobilized on a nanogold/thionine/DNA-modified gold electrode, and then a sandwich-type immunoassay format was employed for the detection of HBsAg using nanogold-codified horseradish peroxidase-HBsAb conjugates as secondary antibodies. Under optimal conditions, the current response of the sandwich-type immunocomplex relative to the H₂O₂ system was proportional to HBsAg concentration in the range from 0.5 to 650 ng·mL^?1 with a detection limit of 0.1 ng·mL^?1 (S/N?=?3). The precision, reproducibility and stability of the immunosensor were acceptable. Subsequently, the immunosensors were used to assay HBsAg in human serum specimens. Analytical results were in agreement with those obtained by the standard chemiluminescence enzyme-linked immunosorbent assay.     

Nanosilver and DNA-functionalized immunosensing probes for electrochemical immunoassay of alpha-fetoprotein

A simple and sensitive electrochemical immunosensor for a one-step immunoassay for alpha-fetoprotein (AFP) was designed using silver nanoparticles and double-stranded DNA as matrices. The detection was based on the change in the electron transfer resistance before and after the antigen-antibody reaction by using electrochemical impedance spectroscopy. Under optimal conditions, the resistance shift of the immunosensor is proportional to the AFP concentration in the range 3.5 –360 ng·mL^?1 with a detection limit of 1.5 ng·mL^?1 (at 3σ). The immunosensor exhibits high sensitivity, good reproducibility and stability. Results obtained for clinical serum samples by the immunosensor are in accordance with those determined by spectrophotometric enzyme-linked immunosorbent assays.     

Diphenyl diselenide grafted onto a Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-chitosan composite as a new nanosorbent for separation of metal ions by effervescent salt-assisted dispersive magnetic micro solid-phase extraction

Diphenyl diselenide was immobilized on chitosan loaded with magnetite (Fe₃O₄) nanoparticles to give an efficient and cost-effective nanosorbent for the preconcentration of Pb(II), Cd(II), Ni(II) and Cu(II) ions by using effervescent salt-assisted dispersive magnetic micro solid-phase extraction (EA-DM-μSPE). The metal ions were desorbed from the sorbent with 3M nitric acid and then quantified via microflame AAS. The main parameters affecting the extraction were optimized using a one-at-a-time method. Under optimum condition, the limits of detection, linear dynamic ranges, and relative standard deviations (for n?=?3) are as following: Pb(II): 2.0 ng·mL^?1; 6.3–900 ng·mL^?1; 1.5%. Cd(II): 0.15 ng·mL^?1; 0.7–85 ng·mL^?1, 3.2%; Ni(II): 1.6 ng·mL^?1,.6.0–600. ng·mL^?1, 4.1%; Cu(II): 1.2 ng·mL^?1, 3.0–300 ng·mL^?1, 2.2%. The nanosorbent can be reused at least 4 times.

Open image in new window

Graphical abstract Fe₃O₄-chitosan composite was modified with diphenyl diselenide as a sorbent for separation of metal ions by effervescent salt-assisted dispersive magnetic micro solid-phase extraction.

     

Combined electrochemiluminescent and electrochemical immunoassay for interleukin 6 based on the use of TiO<Subscript>2</Subscript> mesocrystal nanoarchitectures

A dual-responsive sandwich-type immunosensor is described for the detection of interleukin 6 (IL-6) by combining electrochemiluminescent (ECL) and electrochemical (EC) detection based on the use of two kinds of TiO₂ mesocrystal nanoarchitectures. A composite was prepared from TiO₂ (anatase) mesocages (AMCs) and a carboxy-terminated ionic liquid (CTIL) and then placed on a glassy carbon electrode (GCE). In the next step, the ECL probe Ru(bpy)₃(II) and antibody against IL-6 (Ab₁) were immobilized on the GCE. Octahedral anatase TiO₂ mesocrystals (OAMs) served as the matrix for immobilizing acid phosphatase (ACP) and secondary antibody (Ab₂) labeled with horseradish peroxidase (HRP) to form a bioconjugate of type Ab₂-HRP/ACP/OAMs. It was self-assembled on the GCE by immunobinding. 1-Naphthol, which is produced in-situ on the surface of the GCE due to the hydrolysis of added 1-naphthyl phosphate by ACP, is oxidized by HRP in the presence of added H₂O₂. This results in an electrochemical signal (typically measured at 0.4 V vs. Ag/AgCl) that increases linearly in the 10 fg·mL^?1 to 90 ng·mL^?1 IL-6 concentration range with a detection limit of 0.32 fg·mL^?1. Secondly, the oxidation product of 1-naphthol quenches the ECL emission of Ru(bpy)₃²⁺. This leads to a decrease in ECL intensity which is linear in the 10 ag·mL^?1 to 90 ng·mL^?1 concentration range, with a detection limit of 3.5 ag·mL^?1. The method exhibits satisfying selectivity and good reproducibility which demonstrates its potential in clinical testing and diagnosis.

Open image in new window

Graphical abstract A dual-responsive sandwich-type immunosensor was fabricated for the detection of interleukin 6 by combining electrochemiluminescence and electrochemical detection based on the use of two kinds of TiO₂ mesocrystal nanoarchitectures.

     

Rabbit Monoclonal Antibody-Based Lateral Flow Immunoassay Platform for Sensitive Quantitation of Four Sulfonamide Residues in Milk and Swine Urine

Based on the available rabbit monoclonal antibody (RabMAb), a rapid and sensitive lateral flow immunoassay (LFA) platform has been developed for quantitative detection of four sulfonamide residues(SRs) of sulfadiazine (SD), sulfathiazole (STZ), sulfapyridine (SP), and sulfamethoxazole (SMX).Within the designed LFA competitive format assay, which was based on antigen-antibody properties, the hapten conjugate N¹-[4-(carboxymethyl)-2-thiazolyl] sulfanilamide linked to protein ovalbumin (TS-OVA) and goat anti-rabbit antibody were sprayed as capture and control reagents, respectively, and then the antibody was conjugated to colloidal gold particles as the detection reagent. With quantitative assessment aided by a colorimetric strip reader, the sensitivities of the established LFA method for SD, STZ, SP, and SMX were 0.91 ng mL^?1, 0.10ng mL^?1,0.12ng mL^?1, and 2.13ng mL^?1, and the half-maximum inhibition concentrations (IC₅₀) were 5.19 ng mL^?1, 1.25 ng mL^?1, 0.66 ng mL^?1, and 24.14 ng mL^?1, respectively. The recoveries at three spiked levels (5, 20, 50 ng mL^?1for SD, STZ, and SP; 20, 50, 100 ng mL^?1 for SMX) were in the range of 78.02–135.10% and 76.40–137.16% for milk and swine urine, respectively. More importantly, the detection performance of the established platform was consistent with that of in-parallel LC-MS/MS analysis. In conclusion, the proposed LFA platform has showed the potential for fast, sensitive and relatively accurate quantification of four sulfonamide residues in practical uses.     

Silica Microspheres for SPE and Determination of Fungicides in Water by LC

A new method has been developed for the determination of metalaxyl, myclobutanil, and tebuconazole in environmental water samples with preconcentration by cartridges packed with SiO₂ microspheres prior to LC. Several parameters such as the volume and composition of eluent, sample flow rate, sample pH, and sample volume were optimized. Under the optimal conditions, excellent detection limits (S/N = 3) and precision (RSD, n = 6) were 0.02 ng mL^?1, 1.3% for metalaxyl, 0.02 ng mL^?1, and 2.4% for myclobutanil and 0.08 ng mL^?1 and 4.3% for tebuconazole, respectively. The method was applied to the analysis of real-water samples, and satisfactory results were obtained. The average spiked recoveries were in the range of 86.3–97.5%. These results indicate that SiO₂ microspheres have great potential to be used as a novel solid phase extraction adsorbent that could have wide applications in the environmental field.     

Electrochemical immunosensor for the carcinoembryonic antigen based on a nanocomposite consisting of reduced graphene oxide,gold nanoparticles and poly(indole-6-carboxylic acid)

We describe a label-free electrochemical immunosensor for the carcinoembryonic antigen (CEA). It is based on a nanocomposite consisting of electrochemically reduced graphene oxide, gold nanoparticles (AuNPs), and poly(indole-6-carboxylic acid). Coupled to nanoparticle-amplification techniques and modified with ionic liquid (IL), this immunoassay shows high sensitivity and good selectivity for CEA. At the best working voltage of 0.95 V (vs. Ag/AgCl), the lower detection limit is 0.02 ng·mL^?1, and the response to CEA is linear in the range from 0.02 to 90 ng·mL^?1. The method was applied to the determination of CEA in spiked serum samples and gave recoveries in the range from 98.5 % to 102 %.

Open image in new window

Graphical abstract A label-free electrochemical immunosensor was fabricated for the carcinoembryonic antigen (CEA) with a detection limit of 0.02 ng·mL^?1. It is based on a nanocomposite consisting of electrochemically reduced graphene oxide (erGO), gold nanoparticles (Au NP), and poly(indole-6-carboxylic acid) (PICA).

     

Carbon nanoparticle modified screen printed carbon electrode as a disposable electrochemical immunosensor strip for the detection of Japanese encephalitis virus

The authors describe a disposable electrochemical immunosensor strip for the detection of the Japanese encephalitis virus (JEV). The assay is based on the use of a screen printed carbon electrode (SPCE) modified with carbon nanoparticles (CNPs) that were prepared from starch nanoparticles and deposited on the SPCE working electrode whose surface was functionalized with 3-aminopropyl triethoxysilane. Next, antibody of JEV was immobilized on the surfaces of the CNPs. The analytical performance of immunosensor strip was characterized using cyclic voltammetry (with hexacyanoferrate as the redox probe) and electrochemical impedance spectroscopy. The deposition of CNPs enhances the electron transfer kinetics and current intensity of the SPCE by 63% compared to an unmodified SPCE. Under optimized conditions, the calibration plot is linear within the 5–20 ng·mL^?1 JEV concentration range, the limit of detection being 2 ng·mL^?1 (at an S/N ratio of 3), and the assay time is 20 min. This immunosensor strip was successfully applied to the detection of JEV in human serum samples. It represents a cost-effective alternative to conventional diagnostic tests for JEV.

Open image in new window

Graphical abstract A disposable carbon nanoparticles modified screen printed carbon electrode (SPCE) immunosensor strip for Japanese encephalitis virus (JEV) detection is described. A limit of detection of 2 ng·mL^?1 and an assay time of 20 min were achieved.

     

A disposable immunosensor based on gold colloid modified chitosan nanoparticles-entrapped carbon paste electrode

A new strategy is described to construct disposable electrochemical immunosensors for the assay of human immunoglobulin. It is based on a carbon paste electrode constructed from chitosan nanoparticles modified with colloidal gold. The stepwise assembly process of the immunosensor was characterized by means of cyclic voltammetry and electrochemical impedance spectroscopy. Assay conditions that were optimized included the amount of chitosan nanoparticles in the preparation of carbon paste electrode, antibody concentration, and the incubation time of the antibody immobilization. Using hexacyanoferrate as a mediator, the current change increased with the concentration of human immunoglobulin G. A linear relationship in the concentration range 0.3 to 120 ng mL^?1 was achieved, with a detection limit of 0.1 ng mL^?1 (S/N?=?3). The method combines the specificity of the immunological reaction with the sensitivity of the gold colloid amplified electrochemical detection, and it has potential application in clinical immunoassay.     

Sandwich Immunoassay for Hepatitis C Virus Non-Structural 5A Protein Using a Glassy Carbon Electrode Modified with an Au-MoO3/Chitosan Nanocomposite

A novel electrochemical immunosensor was prepared for the detection of the hepatitis C virus non-structural 5A protein. A glassy carbon electrode was modified with an Au-MoO₃/Chitosan nanocomposite that warranted good conductivity and biocompatibility. Mesoporous silica with a large specific surface served as a nanocarrier for horseradish peroxidase and the polyclonal antibody as the reporter probe. The immunosensor was characterized by scanning electron microscopy, electrochemical impedance spectroscopy, and cyclic voltammetry. Following the sandwich-type immunoreaction, horseradish peroxidase was efficiently captured on the surface of the electrode to catalyze the decomposition of hydrogen peroxide. The analytical signal was obtained as an amperometric i-t curve (chronoamperometry). The assay reported here had a wide detection range (1 ng mL^?1 ?50 µg mL^?1) and detection limit as low as 1 ng mL^?1 of hepatitis C virus non-structural 5A protein. The electrochemical biosensor experiments showed excellent reproducibility, high selectivity, and outstanding stability for the determination of hepatitis C virus non-structural 5A protein, and it was successfully applied to the detection of the analyte in real serum samples.     

RP-LC Determination and Pharmacokinetic Study of Ferulic Acid and Isoferulic Acid in Rat Plasma After Taking Traditional Chinese Medicinal-Preparation: Guanxinning Lyophilizer

A sensitive, simple, and accurate method for determination and pharmacokinetic study of ferulic acid and isoferulic acid in rat plasma was developed using a reversed-phase column liquid chromatographic (RP-LC) method with UV detection. Sample preparations were carried out by protein precipitation with the addition of methanol, followed by evaporation to dryness. The resultant residue was then reconstituted in mobile phase and injected into a Kromasil C₁₈ column (250 × 4.6 mm i.d. with 5 μm particle size). The mobile phase was methanol-1% formic acid (33:67, v/v). The calibration plots were linear over the range 5.780–5780 ng·mL^?1 for ferulic acid and 1.740–348.0 ng·mL^?1 for isoferulic acid. Mean recoveries were 85.1% and 91.1%, respectively. The relative standard deviations (RSDs) of within-day and between-day precision were not above 15% for both of the analytes. The limits of quantification were 5.780 ng·mL^?1 for ferulic acid and 1.740 ng·mL^?1 for isoferulic acid. This RP-LC method was used successfully in pharmacokinetic studies of ferulic acid and isoferulic acid in rat plasma after intravenous injection of Guanxinning Lyophilizer.     

Development of a Specific Enzyme-Linked Immunosorbent Assay (ELISA) for the Analysis of the Organophosphorous Pesticide Fenthion in Real Samples Based on Monoclonal Antibody

A new specific monoclonal antibody against the organophosphorous pesticide fenthion was produced based on our previous study. A sensitive and specific Enzyme-Linked Immunosorbent Assay (ELISA) for fenthion based on the new immunizing/coating hapten combination was developed. In this study, the H₁ which attempts to expose the aromatic ring group was conjugated with bovine serum albumin (BSA) for the immunogen. All of the haptens that have been synthesized were conjugated with ovalbumin (OVA) for the coating antigen. The efficient antibody/coating conjugated combinations were selected, and the optimized ELISA was developed. In the optimized system, the IC₅₀ value was 5.8 ng · mL^?1 with the detection limit (IC₂₀) of 0.028 ng · mL^?1. The cross reactivity with all of the tested pesticides was lower than the 0.5%. Also, the system can detect the fenthion addition to the real samples such as soil, water, rice, and Chinese cabbages.     

An convenient strategy for IgG electrochemical immunosensor: the platform of topological insulator materials Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> and ionic liquid

A substantial outstanding challenge in diagnostics and disease monitoring is the ability to assay rapidly and conveniently for protein biomarkers within complex biological media. Bi₂Se₃, as an important topological insulator (TI) material, was synthesized by a solvothermal method and characterized structurally. Subsequently, the composite of Bi₂Se₃ and ionic liquid ([BMIm]BF₄ IL) was used as a sensing interface to cross-link goat anti-human immunoglobulin G (anti-IgG) via glutaraldehyde (GA) to fabricate an Bi₂Se₃/IL/GA/anti-IgG-carbon paste electrode (CPE). The nonspecific binding sites were enclosed with bovine serum albumin (BSA) to develop a label-free IgG immunosensor. The result showed that the proposed label-free IgG immunosensor exhibited high specificity with a detection limit of 0.8 ng mL^?1 and linear range from 2 to 300, and 300 to 2200 ng mL^?1. Besides, the immunosensor exhibited high specificity for IgG detection, acceptable reproducibility, and stability. Thus, the strategy reported here paved a simple way to design a sensitive and cost-effective sensing platform for extension to other disease biomarkers.     

Determination of Pantoprazole, Rabeprazole, Esomeprazole, Domperidone and Itopride in Pharmaceutical Products by Reversed Phase Liquid Chromatography Using Single Mobile Phase

A simple, sensitive, and precise high performance liquid chromatographic method for the analysis of pantoprazole, rabeprazole, esomeprazole, domperidone and itopride, with ultraviolet detection at 210 nm, has been developed, validated, and used for the determination of compounds in commercial pharmaceutical products. The compounds were well separated on a Hypersil BDS C18 reversed-phase column by use of a mobile phase consisting of 0.05 M, 4.70 pH, potassium dihydrogen phosphate buffer - acetonitrile (720:280 v/v) at a flow rate of 1.0 mL min^?1. The linearity ranges were 400–4,000 ng mL^?1 for pantoprazole, 200–2,000 ng mL^?1 for rabeprazole, 400–4,000 ng mL^?1 for esomeprazole, 300–3,000 ng mL^?1 for domperidone and 500–5,000 ng mL^?1 for itopride. Limits of detection (LOD) obtained were: pantoprazole 147.51 ng mL^?1, rabeprazole 65.65 ng mL^?1, esomeprazole 131.27 ng mL^?1, domperidone 98.33 ng mL^?1 and itopride 162.35 ng mL^?1. The study showed that reversed-phase liquid chromatography is sensitive and selective for the determination of pantoprazole, rabeprazole, esomeprazole, domperidone and itopride using single mobile phase.     

Determination of Protoberberine Alkaloids in Coptis chinensis by Microextraction and High Performance Liquid Chromatography

Sample preparation technique based on an organic filter membrane (pH-resolved filter membrane microextraction) (pH-RFMME) was developed, coupled with high-performance liquid chromatography, and used to determine protoberberine alkaloids (jatrorrhizine, epiberberine, coptisine, palmatine, and berberine) in Coptis chinensis at different pH values through a one-step procedure. This green procedure provides a desirable sample pretreatment technology. The main variables affecting the extraction such as filter membrane area (or volumes of extraction solvents), sample pH, eluent pH, ionic strength, extraction stirring rate, extraction time, and sample volume were optimized. Under the optimized conditions, the enrichment factors of the analytes were 40.4–52.0, the linear ranges were 3.2–6250 ng · mL^?1 for jatrorrhizine and epiberberine, 6.0–12000 ng · mL^?1 for coptisine, 1.8–3600 ng · mL^?1 for palmatine, and 18.8–18800 ng · mL^?1 for berberine, with r ² ≥ 0.9945. The limits of detection were less than 0.3 ng · mL^?1. Satisfactory recoveries (84.8%–115.5%) and precision (1.8%–10.0%) were also achieved. These results confirmed that pH-RFMME is a simple, rapid, practical, and environmentally friendly method to isolate analytes that exhibit significant differences in acidity or alkalinity from complex samples.     

Determination of Tangeretin in Rat Plasma by LC-Electrospray-Ion Trap MS

A selective, sensitive, and accurate method has been developed and validated for the quantification of tangeretin in rat plasma. The application of LC-electrospray-ion trap mass spectrometry in full scan and multiple reactions monitoring modes were investigated. Following solid phase extraction using a hydrophilic–lipophilic balance cartridge, the analytes were separated on a C₁₈ column using an isocratic mobile phase composed of acetonitrile/water (50:50, v/v) containing 0.3% formic acid. In full scan mode, the LOQ was 2 ng mL^?1. The standard calibration curve was linear (R ² = 0.9999) over the concentration range 2–200 ng mL^?1. The precision over the concentration range was within 15% (RSD) and the accuracy was ranged from 86 to 115%. In multiple reaction monitoring mode, the LOQ was 1 ng mL^?1 and the standard calibration curve was linear (R ² = 0.9976) over the concentration range 1–100 ng mL^?1 with a precision of 12% and accuracy rangeing from 91 to 113%.     

Development and Validation of Atorvastatin by LC–ESI–MS and Application in Bioequivalence Research in Healthy Chinese Volunteers

The aim of this research was to develop a sensitive liquid chromatographic–electrospray ionization–mass spectrometric (LC–MS) method for direct measurement of the concentration of Atorvastatin in human plasma. Plasma samples (1 mL) were extracted with 3 mL ethyl acetate, and by a simple reversed-phase chromatography. Pitavastatin was used as internal standard (IS). The LOQ was 0.25 ng mL^?1 (RSD 4.24%). The assay was linear from 0.25–20 ng mL^?1. And the correlation coefficient for the calibration regression line was 0.9996 or better. Intra-day and inter-day accuracy were better than 15%. The method has been successfully used for a pharmacokinetic study with human subjects. A two-period crossover designed bioequivalence research was also progressed in healthy Chinese volunteers. Among the pharmacokinetic data obtained, T _max was 1.36 ± 0.68 h for reference formulation and 0.81 ± 0.54 h for test formulation. C _max was 8.54 ± 5.06 ng mL^?1 for reference formulation and 9.54 ± 3.68 ng mL^?1 for test formulation. t _1/2 was 8.50 ± 2.74 h for reference formulation and 9.24 ± 3.17 h for test formulation. AUC _0?48h was 54.77 ± 21.82 h ng mL^?1 for reference formulation and 55.66 ± 20.91 h ng mL^?1 for test formulation. The method was successfully applied to the study of pharmacokinetics of Atorvastatin in healthy Chinese volunteers.