Shock‐tube and modeling study of acetaldehyde pyrolysis and oxidation

Pyrolysis and oxidation of acetaldehyde were studied behind reflected shock waves in the temperature range 1000–1700 K at total pressures between 1.2 and 2.8 atm. The study was carried out using the following methods, (1) time‐resolved IR‐laser absorption at 3.39 μm for acetaldehyde decay and CH‐compound formation rates, (2) time‐resolved UV absorption at 200 nm for CH₂CO and C₂H₄ product formation rates, (3) time‐resolved UV absorption at 216 nm for CH₃ formation rates, (4) time‐resolved UV absorption at 306.7 nm for OH radical formation rate, (5) time‐resolved IR emission at 4.24 μm for the CO₂ formation rate, (6) time‐resolved IR emission at 4.68 μm for the CO and CH₂CO formation rate, and (7) a single‐pulse technique for product yields. From a computer‐simulation study, a 178‐reaction mechanism that could satisfactorily model all of our data was constructed using new reactions, CH₃CHO (+M) → CH₄ + CO (+M), CH₃CHO (+M) → CH₂CO + H₂(+M), H + CH₃CHO → CH₂CHO + H₂, CH₃ + CH₃CHO → CH₂CHO + CH₄, O₂ + CH₃CHO → CH₂CHO + HO₂, O + CH₃CHO → CH₂CHO + OH, OH + CH₃CHO → CH₂CHO + H₂O, HO₂ + CH₃CHO → CH₂CHO + H₂O₂, having assumed or evaluated rate constants. The submechanisms of methane, ethylene, ethane, formaldehyde, and ketene were found to play an important role in acetaldehyde oxidation. © 2007 Wiley Periodicals, Inc. 40: 73–102, 2008     

Experimental and kinetic modeling study of the effect of sulfur dioxide on the mutual sensitization of the oxidation of nitric oxide and methane

New experimental results were obtained for the mutual sensitization of the oxidation of NO and methane in a fused silica jet‐stirred reactor operating at 10⁵ Pa, over the temperature range 800–1150 K. The effect of the addition of sulfur dioxide was studied. Probe sampling followed by online FTIR analyses and off‐line GC‐TCD/FID analyses allowed the measurement of concentration profiles for the reactants, stable intermediates, and final products. A detailed chemical kinetic modeling of the present experiments was performed. An overall reasonable agreement between the present data and modeling was obtained. According to the present modeling, the mutual sensitization of the oxidation of methane and NO proceeds via the NO to NO₂ conversion by HO₂ and CH₃O₂. The conversion of NO to NO₂ by CH₃O₂ is more important at low temperatures (800 K) than at higher temperatures (850–900 K) where the production of NO₂ is mostly due to the reaction of NO with HO₂. The NO to NO₂ conversion is favored by the production of the HO₂ and CH₃O₂ radicals yielded from the oxidation of the fuel. The production of OH resulting from the oxidation of NO accelerates the oxidation of the fuel: NO + HO₂ → OH+ NO₂ followed by OH + CH₄→ CH₃. In the lower temperature range of this study, the reaction further proceeds via CH₃ + O₂→ CH₃O₂; CH₃O₂+ NO → CH₃O + NO₂. At higher temperatures, the production of CH₃O involves NO₂: CH₃+ NO₂→ CH₃O. This sequence of reactions is followed by CH₃O → CH₂O + H; CH₂O +OH → HCO; HCO + O₂ → HO₂ and H + O₂ → HO₂ → CH₂O + H; CH₂O +OH → HCO; HCO + O₂ → HO₂ and H + O₂ → HO₂. The data and the modeling show that unexpectedly, SO₂ has no measurable effect on the kinetics of the mutual sensitization of the oxidation of NO and methane in the present conditions, whereas it frequently acts as an inhibitor in combustion. This result was rationalized via a detailed kinetic analysis indicating that the inhibiting effect of SO₂ via the sequence of reactions SO₂+H → HOSO, HOSO+O₂ → SO₂+HO₂, equivalent to H+O₂?HO₂, is balanced by the reaction promoting step NO+HO₂ → NO₂+OH. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 406–413, 2005     

An FTIR study of the mechanism for the reaction HO + CH3SCH3

Product studies were made using the Fourier transform infrared method in the uv (300–400-nm) photolysis of mixtures containing CH₃SCH₃, C₂H₅ONO, and NO in ppm concentrations in 700 torr of O₂–N₂ diluent. Methyl thionitrite, CH₃SNO, arising from the reaction CH₃S + NO, was detected as an intermediate product. In addition, the yields of the major sulfur-containing products SO₂ and CH₃SO₃H coincided with those of the oxidation of the CH₃S radicals generated directly by the photodissociation of CH₃SNO. The formation of CH₃S in the HO-initiated oxidation of CH₃SCH₃ in the presence of NO suggests a reaction scheme involving the H-abstraction reaction HO + CH₃SCH₃ → CH₃SCH₂ + H₂O as the primary step.     

Unusual H2-forming chain reaction in the 3130-Å photolysis of formaldehyde-oxygen mixtures at 25°C

A kinetic study has been made of the 3130-Å photolysis of CH₂O (8 torr) in O₂-containing mixtures (0.02–8 torr) and in the presence of added CO₂ (0–300 torr) at 25°C. Quantum yields of formation of H₂, CO, and CO₂ and the loss of O₂ were measured. Φ and Φ_CO were much above unity. In an explanation of these unexpected results, a new H-atom-forming chain mechanism was postulated involving HO₂ and HO addition to CH₂O: CH₂O + hν → H + HCO (1) H + CH₂O → H₂ + HCO (3) H + O₂ + M → HO₂ + M (6) HCO + O₂ → HO₂ + CO (8) HO₂ + CH₂O → (HO₂CH₂O) → HO + HCO₂H (15) HO + CH₂O → H₂O + HCO? (16); HCO? → H + CO (19) HO + CH₂O → H₂O + HCO (17) and HO + CH₂O → HCO₂H + H (18). When the results are rationalized in terms of this mechanism, the data suggest k₁₆ ? k₁₇ and k₁₆/k₁₈ ? 0.5. The data require that a reassessment of the relative rates of reactions (7) and (8) be made, since in the previous work HCO₂H formation was used as a monitor of the rate of reaction (7) HCO + O₂ + M → HCOO₂ + M (7). The present data from experiments at P = 8 torr and P = 1–4 torr give k₇[M]/(k₇[M] + k₈) ≥ 0.049 ± 0.017. These data coupled with the k₈ estimates of Washida and coworkers give k₇ ≥ (4.4 ± 1.6) × 10¹¹ l²/mol²·sec for M = CH₂O. The reaction sequence proposed here is consistent with the observed deterimental effect of O₂ addition on the laser-induced isotope enrichment in HDCO. In additional studies of CH₂O-O₂-isobutene mixtures it was found that Φ was equal to ?₂ as estimated in O₂-free CH₂O-isobutene mixtures. These results suggest that the increase in CO (ν = 1) product observed with O₂ addition in CH₂O photolysis does not result from perturbations in the fragmentation pattern of the excited CH₂O, but it is likely that it originates in the occurrence of the exothermic reaction HCO + O₂ → HO₂ + CO (ν = 1).     

A flash photolysis-resonance fluorescence study of the reaction of atomic hydrogen with molecular oxygen H + O2 + M → HO2 + M

Using the technique of flash photolysis-resonance fluorescence, absolute rate constants have been measured for the reaction H + O₂ + M → HO₂+M over a temperature range of 220–360°K. Over this temperature range, the data could be fit to an Arrhenius expression of the following form: The units for k_Ar are cm⁶/mole-s. At 300°K the relative efficiencies for the third-body gases Ar:He:H₂:N₂:CH₄ were found to be 1.0:0.93:3.0:2.8:22. Wide variations in the photoflash intensity at several temperatures demonstrated that the reported rate constants were measured in the absence of other complex chemical processes.     

Determination of the isomerization rate constant HOCH2CH2CH2CH(OO·)CH3 →HOC·HCH2CH2CH(OOH)CH3. Importance of intramolecular hydroperoxy isomerization in tropospheric chemistry

The rate constant of the title reaction is determined during thermal decomposition of di-n-pentyl peroxide C₅H₁₁O( )OC₅H₁₁ in oxygen over the temperature range 463–523 K. The pyrolysis of di-n-pentyl peroxide in O₂/N₂ mixtures is studied at atmospheric pressure in passivated quartz vessels. The reaction products are sampled through a micro-probe, collected on a liquid-nitrogen trap and solubilized in liquid acetonitrile. Analysis of the main compound, peroxide C₅H₁₀O₃, was carried out by GC/MS, GC/MS/MS [electron impact EI and NH₃ chemical ionization CI conditions]. After micro-preparative GC separation of this peroxide, the structure of two cyclic isomers (3S*,6S*)3α-hydroxy-6-methyl-1,2-dioxane and (3R*,6S*)3α-hydroxy-6-methyl-1,2-dioxane was determined from ¹H NMR spectra. The hydroperoxy-pentanal OHC( )(CH₂)₂( )CH(OOH)( )CH₃ is formed in the gas phase and is in equilibrium with these two cyclic epimers, which are predominant in the liquid phase at room temperature. This peroxide is produced by successive reactions of the n-pentoxy radical: a first one generates the CH₃C·H(CH₂)₃OH radical which reacts with O₂ to form CH₃CH(OO·)(CH₂)₃OH; this hydroxyperoxy radical isomerizes and forms the hydroperoxy HOC·H(CH₂)₂CH(OOH)CH₃ radical. This last species leads to the pentanal-hydroperoxide (also called oxo-hydroperoxide, or carbonyl-hydroperoxide, or hydroperoxypentanal), by the reaction HOC·H(CH₂)₂CH(OOH)CH₃+O₂→O()CH(CH₂)₂CH(OOH)CH₃+HO₂. The isomerization rate constant HOCH₂CH₂CH₂CH(OO·)CH₃→HOC·HCH₂CH₂CH(OOH)CH₃ (k₃) has been determined by comparison to the competing well-known reaction RO₂+NO→RO+NO₂ (k₇). By adding small amounts of NO (0–1.6×10¹⁵ molecules cm⁻³) to the di-n-pentyl peroxide/O₂/N₂ mixtures, the pentanal-hydroperoxide concentration was decreased, due to the consumption of RO₂ radicals by reaction (7). The pentanal-hydroperoxide concentration was measured vs. NO concentration at ten temperatures (463–523 K). The isomerization rate constant involving the H atoms of the CH₂( )OH group was deduced: or per H atom: The comparison of this rate constant to thermokinetics estimations leads to the conclusion that the strain energy barrier of a seven-member ring transition state is low and near that of a six-member ring. Intramolecular hydroperoxy isomerization reactions produce carbonyl-hydroperoxides which (through atmospheric decomposition) increase concentration of radicals and consequently increase atmospheric pollution, especially tropospheric ozone, during summer anticyclonic periods. Therefore, hydrocarbons used in summer should contain only short chains (<C₄) hydrocarbons or totally branched hydrocarbons, for which isomerization reactions are unlikely. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 875–887, 1998     

On the reaction of CH with CO studied in high temperature CH4/Ar + CO mixtures

In this study a ring dye laser spectrometer was employed for in-situ measurements of CH concentrations in the reaction zone behind shock waves. The time dependent absorption in the Q-branch of the A²Δ — X²Π band of CH at 431.1311 nm caused by the formation and consumption of CH radicals during the shock induced pyrolysis of a few ppm methane in argon was recorded. The CH concentration could directly be calculated from the measured absorption by applying the Lambert-Beer law. By adding a few percent CO to the initial mixtures, the CH concentration profiles were significantly perturbed. Both the perturbed and unperturbed CH concentration profiles have been compared with those calculated from reaction kinetic simulations. A reaction mechanism describing the CH concentration history in the CH₄/Ar and CH₄/CO/Ar systems between 2900 K and 3500 K was developed. By a fitting procedure, a value of k₁ = 1.85 × 10¹¹ cm³ mol^?1 s^?1 was obtained for the most important perturbation reaction CH + CO → C₂O + H.     

The kinetics and the mechanism of the oxidation of carbon monoxide in the presence of hydrogen

The kinetics of the slow oxidation of CO in the presence of H₂ have been studied above the second explosion limit for the mixture 2CO + O₂ + X% H₂ at the temperature range of 530–570°C, pressures from 300 to 530 torr, and hydrogen contents of 1.1, 2.8, and 5.7%. The second explosion limit has been experimentally determined for the mixture of 2CO + O₂ containing 1.0, 3.0, and 5.7% H₂. On the basis of the oxidation scheme of CO in the presence of H₂, which includes the accepted mechanism of oxidation of hydrogen supplemented by the reactions in which CO takes part, the second explosion limit and the profiles of the slow reaction are calculated by computer methods. The agreement found between experimental and calculated values allows one to conclude that the scheme under consideration rather completely described the slow reaction above the second limit and the occurrence of the second explosion limit in the mixture CO–O₂–H₂. The rate constant for the reaction HO₂ + CO → OH + CO₂ was calculated from the experimental data and was found to agree with previous determinations.     

A shock tube study of the pyrolysis of NO2

NO₂ concentration profiles in shock-heated NO₂/Ar mixtures were measured in the temperature range of 1350–2100 K and pressures up to 380 atm using Ar⁺ laser absorption at 472.7 nm, IR emission at 6.25±0.25 μm, and visible emission at 300–600 nm. In the course of this study, the absorption coefficient of NO₂ at 472.7 nm was measured at temperatures from 300 K to 2100 K and pressures up to 75 atm. Rate coefficients for the reactions NO₂+M→NO+O+M (1), NO₂+NO₂→2NO+O₂ (2a), and NO₂+NO₂→NO₃+NO (2b) were derived by comparing the measured and calculated NO₂ profiles. For reaction (1), the following low- and high-pressure limiting rate coefficients were inferred which describe the measured fall-off curves in Lindemann form within 15% [FORMULA] The inferred rate coefficient at the low- pressure limit, k_1o, is in good agreement with previous work at higher temperatures, but the energy of activation is lower by 20 kJ/mol than reported previously. The pressure dependence of k₁ observed in the earlier work of Troe [1] was confirmed. The rate coefficient inferred for the high pressure limit, k_1∞, is higher by a factor of two than Troe's value, but in agreement with data obtained by measuring specific energy-dependent rate coefficients. For the reactions (2a) and (2b), least-squares fits of the present data lead to the following Arrhenius expressions: [FORMULA] For reaction (2), the new data agree with previously recommended values of k_2a and k_2b, although the present study suggests a slightly higher preexponential factor for k_2a. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 483–493, 1997.     

Experimental determination of the equilibrium constant of the reaction CH3 + O2 ⇄ CH3O2 during the gas-phase oxidation of methane

For the experimental determination of the equilibrium constant of the reaction CH₃ + O₂ ? CH₃O₂ (1), the process of methane oxidation has been studied over the temperature range of 706–786 K. The concentration of CH₃O₂ has been measured by the radical freezing method, and that of CH₃ from the rate of accumulation of ethane, assuming that C₂H₆ is produced by the reaction CH₃ + CH₃ → C₂H₆ (2). The equilibrium constant of reaction (1) has been obtained at four temperatures. For the heat of the reaction the value Δ?H₂₉₈ = -32.2 ± 1.5 kcal/mol is recommended.     

Are the anions MeO(CO) (n = 1 and 2) methoxide anion donors in the gas phase? A theoretical investigation

• 1. The anions CH₃O‐^–CO and CH₃OCO‐^–CO are both methoxide anion donors. The processes CH₃O‐^–CO → CH₃O^– + CO and CH₃OCO—CO → CH₃O^– + 2CO have ΔG values of +8 and ?68 kJ mol^?1, respectively, at the CCSD(T)/6‐311++G(2d, 2p)//B3LYP/6‐311++G(2d,2p) level of theory.
• 2. The reactions CH₃OCOCO → CH₃OCO + CO (ΔG = ?22 kJ mol^?1) and CH₃COCH(O^–)CO₂CH₃ → CH₃COCH(O^–)OCH₃ + CO (ΔG = +19 kJ mol^?1) proceed directly from the precursor anions via the transition states (CH₃OCO…CO₂)^– and (CH₃COCHO…CH₃OCO)^–, respectively.
• 3. Anion CH₃COCH(O^–)CO₂CH₃ undergoes methoxide anion transfer and loss of two molecules of CO in the reaction sequence CH₃COCH(O^–)CO₂CH₃ → CH₃CH(O^–)COCO₂CH₃ → [CH₃CHO (CH₃OCO‐^–CO)] → CH₃CH(O^–)OCH₃ + 2CO (ΔG = +9 kJ mol^?1). The hydride ion transfer in the first step is a key feature of the reaction sequence.

Copyright © 2010 John Wiley & Sons, Ltd.     

Probing the pyrolysis of ethyl formate in the dilute gas phase by synchrotron radiation and theory

The thermal decomposition of the atmospheric constituent ethyl formate was studied by coupling flash pyrolysis with imaging photoelectron photoion coincidence (iPEPICO) spectroscopy using synchrotron vacuum ultraviolet (VUV) radiation at the Swiss Light Source (SLS). iPEPICO allows photoion mass-selected threshold photoelectron spectra (ms-TPES) to be obtained for pyrolysis products. By threshold photoionization and ion imaging, parent ions of neutral pyrolysis products and dissociative photoionization products could be distinguished, and multiple spectral carriers could be identified in several ms-TPES. The TPES and mass-selected TPES for ethyl formate are reported for the first time and appear to correspond to ionization of the lowest energy conformer having a cis (eclipsed) configuration of the O = C (H)– O – C (H₂)–CH₃ and trans (staggered) configuration of the O= C (H)– O – C (H₂)– C H₃ dihedral angles. We observed the following ethyl formate pyrolysis products: CH₃CH₂OH, CH₃CHO, C₂H₆, C₂H₄, HC(O)OH, CH₂O, CO₂, and CO, with HC(O)OH and C₂H₄ pyrolyzing further, forming CO + H₂O and C₂H₂ + H₂. The reaction paths and energetics leading to these products, together with the products of two homolytic bond cleavage reactions, CH₃CH₂O + CHO and CH₃CH₂ + HC(O)O, were studied computationally at the M06-2X-GD3/aug-cc-pVTZ and SVECV-f12 levels of theory, complemented by further theoretical methods for comparison. The calculated reaction pathways were used to derive Arrhenius parameters for each reaction. The reaction rate constants and branching ratios are discussed in terms of the residence time and newly suggest carbon monoxide as a competitive primary fragmentation product at high temperatures.     

Association reactions of atoms and radicals

The pressure and temperature dependences of association reactions involving atoms and/or radicals is discussed and illustrated by reference to the reactions CH₃ + CH₃ → C₂H₆, CH₃ + O₂ → CH₃O₂, CH₃ + H → CH₄, and H + C₂H₄ → C₂H₅. Recent experimental measurements of the rate coefficients, k([M], T) are described, particular attention being paid to experiments designed to measure the rate coefficient over wide ranges of pressure and temperature. Methods of fitting the experimental data, to obtain estimates of the limiting rate coefficients, k⁰ and k^∞, and to permit extrapolation to regions beyond the experimental range, are discussed. These methods include the Troe factorization technique, a combination of master equation and variational RRKM theory, and recent calculations by Wagner and Wardlaw using the technique developed by Wardlaw and Marcus to describe loose transition states.     

FT‐IR kinetic and product study of the Br‐initiated oxidation of dimethyl sulfide

An FT‐IR kinetic and product study of the Br‐atom‐initiated oxidation of dimethyl sulfide (DMS) has been performed in a large‐volume reaction chamber at 298 K and 1000‐mbar total pressure as a function of the bath gas composition (N₂ + O₂). In the kinetic investigations using the relative kinetic method, considerable scatter was observed between individual determinations of the rate coefficient, suggesting the possibility of interference from secondary chemistry in the reaction system involving dimethyl sulfoxide (DMSO) formation. Despite the experimental difficulties, an overall bimolecular rate coefficient for the reaction of Br atoms with DMS under atmospheric conditions at 298 K of ≤1 × 10⁻¹³ cm³ molecule⁻¹ s⁻¹ can be deduced. The major sulfur products observed included SO₂, CH₃SBr, and DMSO. The kinetic observations in combination with the product studies under the conditions employed are consistent with rapid addition of Br atoms to DMS forming an adduct that mainly re‐forms reactants but can also decompose unimolecularly to form CH₃SBr and CH₃ radicals. The observed formation of DMSO is attributed to reactions of BrO radicals with DMS rather than reaction of the Br–DMS adduct with O₂ as has been previously speculated and is thought to be responsible for the variability of the measured rate coefficient. The reaction CH₃O₂ + Br → BrO + CH₃O is postulated as the source of BrO radicals. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 883–893, 1999     

Validation of a thermal decomposition mechanism of formaldehyde by detection of CH2O and HCO behind shock waves

The thermal decomposition of formaldehyde was investigated behind shock waves at temperatures between 1675 and 2080 K. Quantitative concentration time profiles of formaldehyde and formyl radicals were measured by means of sensitive 174 nm VUV absorption (CH₂O) and 614 nm FM spectroscopy (HCO), respectively. The rate constant of the radical forming channel (1a), CH₂O + M → HCO + H + M, of the unimolecular decomposition of formaldehyde in argon was measured at temperatures from 1675 to 2080 K at an average total pressure of 1.2 bar, k_1a = 5.0 × 10¹⁵ exp(‐308 kJ mol^?1/RT) cm³ mol^?1 s^?1. The pressure dependence, the rate of the competing molecular channel (1b), CH₂O + M → H₂ + CO + M, and the branching fraction β = k_1a/(kA_1a + k_1b) was characterized by a two‐channel RRKM/master equation analysis. With channel (1b) being the main channel at low pressures, the branching fraction was found to switch from channel (1b) to channel (1a) at moderate pressures of 1–50 bar. Taking advantage of the results of two preceding publications, a decomposition mechanism with six reactions is recommended, which was validated by measured formyl radical profiles and numerous literature experimental observations. The mechanism is capable of a reliable prediction of almost all formaldehyde pyrolysis literature data, including CH₂O, CO, and H atom measurements at temperatures of 1200–3200 K, with mixtures of 7 ppm to 5% formaldehyde, and pressures up to 15 bar. Some evidence was found for a self‐reaction of two CH₂O molecules. At high initial CH₂O mole fractions the reverse of reaction (6), CH₂OH + HCO ? CH₂O + CH₂O becomes noticeable. The rate of the forward reaction was roughly measured to be k₆ = 1.5 × 10¹³ cm³ mol^?1 s^?1. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 157–169 2004     

The effect of temperature on formaldehyde photooxidation in oxygen-lean atmospheres

The photooxidation of formaldehyde in CH₂O? O₂, oxygen-lean mixtures was studied in the temperature range 298–378 K. H₂ and CO formation and the loss of O₂ proceed by a chain mechanism, which between 328 and 378 K follows the previously suggested kinetics [1] with one modification. The reaction HO₂ + CH₂O ? HO₂CH₂O (5) is now assumed to be reversible and ΔH is estimated to be between 14 and 19 kcal/mol. The relative yields of the chain formed H₂ and CO and of the consumed O₂ remained constant over the entire temperature range indicating that the relative efficiencies of the HO reactions: HO + CH₂O → H₂O HCO? (7), HO + CH₂O → H₂O + HCO (8) and HO + CH₂O → HOCH₂O (9) are temperature independent.     

Theoretical Study of the Reactions M++CH3F (M=Ge,As, Se,Sb)

CASSCF–MRMP2 calculations have been carried out to analyze the reactions of the methyl fluoride molecule with the atomic ions Ge⁺, As⁺, Se⁺ and Sb⁺. For these interactions, potential energy curves for the low‐lying electronic states were calculated for different approaching modes of the fragments. Particularly, those channels leading to C? H and C? F oxidative addition products, H₂FC? M? H⁺ and H₃C? M? F⁺, respectively were explored, as well as the paths which evolve to the abstraction (M? F⁺+CH₃) and the elimination (CH₂M⁺+HF) asymptotes. For the reaction Ge⁺+CH₃F the only favorable channel leads to fluorine abstraction by the ion. As⁺ and Sb⁺ can react with CH₃F along pathways yielding stable addition products. However, a viable path joining the oxidative addition product H₃C? M? F⁺ with the elimination asymptote CH₂M⁺+HF was found for the reaction of the fluorocarbon compound with As⁺. No favorable channels were detected for the interaction of fluoromethane with Se⁺. The results discussed herein allow rationalizing some of the experimental data found for these interactions through gas‐phase mass spectrometry.     

Sensitive detection of NH2 in shock tube experiments using frequency modulation spectroscopy

Frequency modulation detection of NH₂ in shock tube kinetic experiments is demonstrated with sensitivities of 0.5 ppm in a single pass and 0.25 ppm in a double pass configuration (1500 K, 1.3 atm, detection bandwidth 1 MHz, 15 cm shock tube diameter). This corresponds to a minimum detectable absorption of 0.01% and 0.005%, respectively, which represents an improvement of more than a factor of 20 when compared to conventional laser absorption detection. The feasibility of quantitative absolute concentration measurements is demonstrated using CH₃NH₂ as a precursor for the preparation of known NH₂ concentrations. The uncertainty for absolute concentration measurements is estimated to be ±10% if a suitable precursor for direct shock tube calibration measurements can be used, and ±15% if an alternative calibration scheme based on the detection of the signal generated by a scanning etalon in reflective mode is used. FM detection has been applied to determine the rate coefficient of the thermal decomposition of CH₃NH₂: CH₃NH₂ + M → CH₃+NH₂+M over the temperature range 1530–1975 K and at pressures near 1.3 atm. The rate coefficient was found to be: k₁=8.17×10¹⁶ exp(−30710/T) (±20%) [cm³ mol⁻¹ s⁻¹] This is in good agreement with a recent determination using conventional laser absorption detection of the NH₂ radical. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 445–453, 1999     

A study of ethane decomposition in a shock tube using laser absorption of CH3

The rate coefficient for the unimolecular reaction, C₂H₆ → CH₃ + CH₃, was measured in reflected shock wave experiments using narrow-linewidth laser absorption of methyl radicals at 216.6 nm. The experiments were conducted in the falloff regime at the conditions 1350 to 2110 K, 0.58 to 4.4 atm, in 50 to 500 ppm C₂H₆/Ar and 190 ppm C₂H₆/N₂ mixtures. At temperatures below 1500 K, the measured rate coefficients are in good agreement with the expression of Wagner and Wardlaw (1989). Above 1500 K, the measurements fall increasingly below their predictions. © 1993 John Wiley & Sons, Inc.     

Spin non-conservation in low-energy molecular charge-transfer reactions

The reaction H₂O⁺(²B)+NO₂(²A) → H₂O(¹A) + NO₂⁺(¹Σ) occurs at near the collision rate constant 1.2 × 10^?9 cm³ s^?1, in spite of the fact that the reactants produce both a singlet and a triplet state and the products correlate only with the singlet state. This would be expected to yield a statistical weight factor of $\text{1}\text{4}$ to be multiplied by the collision rate constant to obtain the maximum charge-tranfer rate constant. The triplet products of the charge transfer are clearly endothermic. The singlet—triplet intersection has not been identified but the available information about the singlet and triplet states of the intermediate protonated nitric acid molecule is discussed. Four other examples of apparent “spin violation” charge-transfer reactions have been noted H₂O⁺ + NO, N₂O⁺ + NO.CO⁺ + NO and CH₄⁺ + O₂.