Synthesis, structure characterization and fluorescence property of a new fluoride borate crystal, CdZn2KB2O6F

A new fluoride borate crystal, CdZn₂KB₂O₆F, has been synthesized by flux-supported solid-state reaction. The crystal structure has been determined by single-crystal X-ray diffraction. It crystallizes in the trigonal space group with a=5.0381(6) Å, b=5.0381(6) Å, c=15.1550(19) Å, α=90.00°, β=90.00°, γ=120.00°, Z=2. The crystal represents a new structure type in which ZnBO₃ layers are connected through bridging fluorine and cadmium atoms alternately along the c-axis. K⁺ cations are filled in the intralayer open channels to balance charge. IR and Raman spectra further confirm the crystal structure. Photoluminescent measurement reveals that CdZn₂KB₂O₆F exhibits blue fluorescence at room temperature in the solid-state.     

Hydrothermal Synthesis and Crystal Structure of [(CH3NH3)1.03K2.97]Sb12S20·1.34H2O

A novel thioantimonate(III) [(CH₃NH₃)_1.03K_2.97]Sb₁₂S₂₀·1.34H₂O was synthesized hydrothermally. It crystallizes in space groupP , witha=11.9939(7) Å,b=12.8790(8) Å,c=14.9695(9) Å,α=100.033(1)°,β=99.691(1)°,γ=108.582(1)°,V=2095.3(2) ų, andZ=2. The structure is determined from single crystal X-ray diffraction data collected at room temperature and refined toR(F)=0.037. In the crystal structure, each Sb(III) atoms has short bonds (2.37–2.58 Å) to three S atoms. The pyramidal [SbS₃] groups share common S atoms forming two types of centrosymmetric [Sb₁₂S₂₀] rings with the same topology. These rings are interconnected by weaker Sb–S bonds (2.92–3.29 Å) into 2-dimensional layers. Adjacent layers are parallel with K⁺and CH₃NH⁺₃ions and H₂O molecules located between them. Variation of bond valence sums calculated for the Sb(III) cations is found to be correlated with the coordination geometry. This is interpreted as due to the stereochemical activity of their lone electron pairs.     

Crystal chemistry of three new monodimensional fluorometalates templated with ethylenediamine

Three new monodimensional hybrid metal (Ti, In, Al) fluorides are synthesized with ethylenediamine (en) as a templating agent in solvothermal conditions assisted by microwave heating. All structures involve inorganic chains built up from TiO₂F₄ octahedra connected by two opposite O²⁻ vertices in [H₂en]·(TiOF₄) (I), from InF₆(H₂O) pentagonal bipyramids linked by F–F edges in [H₂en]·(InF₄(H₂O))₂·H₂O (II) and from (Al₇F₃₀)⁹⁻ polyanions sharing two opposite AlF₆ octahedra in [H₂en]₃·(Al₆F₂₄) (III). I is tetragonal, P4/ncc, a = 12.761(3) Å, c = 8.041(3) Å; II is orthorhombic, F2dd, a = 6.904(5) Å, b = 16.559(5) Å, c = 19.777(4) Å and III is monoclinic, P2₁/n, a = 9.387(2) Å, b = 6.710(2) Å, c = 21.513(6) Å, β = 97.18(3)°.     

Single-crystal characterization of Co7(OH)6(H2O)3(C4H4O4)47H2O; A new cobalt succinate identified through high-throughput synthesis

A new form of cobalt succinate has been discovered using high-throughput methods and its structure was solved by single crystal X-ray diffraction. Co₇(C₄H₄O₄)₄(OH)₆(H₂O)₃7H₂O crystallizes in the monoclinic space group P2₁/c with cell parameters: a=7.888(2) Å, b=19.082(6) Å, c=23.630(7) Å, β=91.700(5)°, V=3555(2) Å³, R₁=0.0469. This complex structure, containing 55 crystallographically distinct non-hydrogen atoms, is compared to the previously reported nickel phase, characterized using ab initio structure solution from synchrotron powder diffraction data.     

Flux synthesis of (3,4)-connected zinc phosphites with different framework topologies

Two three-dimensional open-framework zinc phosphites, H₂aem·Zn₃(HPO₃)₄·0.5H₂O (1) and H₂apm·Zn₃(HPO₃)₄ (2), have been synthesized by a phosphorous acid flux method, where aem=4-(2-aminoethyl)morpholine and apm=4-(3-aminopropyl)morpholine. Compound 1 crystallizes in the monoclinic system, P2₁/c, a=9.5852(7) Å, b=20.3941(8) Å, c=10.5339(8) Å, β=94.125(9)°, V=2053.8(2) Å³, Z=4, R₁=0.0319, wR₂=0.0628. Compound 2 crystallizes in the monoclinic system, P2₁/n, a=8.589(2) Å, b=14.020(3) Å, c=16.606(3) Å, β=97.190(8)°, V=1983.9(7) Å³, Z=4, R₁=0.0692, wR₂=0.1479. Both compounds are based on (3,4)-connected networks with 8- and 12-ring channels, which are constructed from Zn₃(HPO₃)₄ clusters as the same secondary building units. These inorganic clusters are spatially organized by different structure-directing agents into different three-dimensional frameworks.     

Preparation, crystal structure, vibrational spectra and thermal behavior of selenites of ethylene diamine, 1,3-propylene diamine and 1,4-butylene diamine

Selenites of ethylene diamine, propylene diamine and butylene diamine were prepared by crystallization from aqueous solution. The crystal structure was solved for all the substances. Ethylene diammonium(2+) selenite crystallizes in the orthorhombic space group P2₁2₁2, a=11.3710(2) Å, b=11.4390(5) Å, c= 4.6290(4) Å, V= 602.11(6) ų, Z=4, R=0.0341 for 5729 observed reflections. 1,3-Propylene diammonium(2+) selenite dihydrate crystallizes in the monoclinic space group C2/c, a=16.241(14) Å, b=6.673(5) Å, c=17.731(14) Å, β=110.88(2)°, V=1795(3) ų, Z=8, R=0.0271 for 12,233 observed reflections. 1,4-Butylene diammonium(2+) selenite dihydrate crystallizes in the monoclinic space group P2₁/c, a=6.686(5) Å, b=16.597(14) Å, c=9.282(8) Å, β=96.653(14)°, V=1023.2(14) ų, Z=4, R=0.0465 for 2918 observed reflections. The FTIR an FT Raman spectra of all the compounds were recorded and interpreted. The thermoanalytical properties were studied by the TG, DTG, and DTA methods in the 293–633 K temperature range. DSC measurements were carried out in the range from 98 K to the temperature of decomposition of the compounds. No thermal effect indicating a phase transition was observed in this temperature region.     

Strontium–copper selenite–chlorides: Synthesis and structural investigation

Two new complex selenite–chlorides of strontium and copper Sr₂Cu(SeO₃)₂Cl₂ (I) and SrCu₂(SeO₃)₂Cl₂ (II) were obtained and characterized by X-ray diffraction technique, DTA and IR spectroscopy. Both compounds crystallize in the monoclinic system I: Sp. gr. P2₁/n, a=5.22996(3) Å, b=6.50528(4) Å, c=12.34518(7) Å, β=91.3643(2)°, Z=2; II: Sp. gr. P2₁, a=7.1630(14) Å, b=7.2070(14) Å, c=8.0430(16) Å, β=95.92(3)°, Z=2. Comparison of the crystal structure of (I) with the structures of Sr₂M(SeO₃)₂Cl₂ (M=Co, Ni) was performed. The substitution of strontium atom in the structure of (I) by Cu²⁺ ion with a 3d⁹ Jahn–Teller distorted surrounding leads to the lowering of the structure symmetry and to the appearance of the noncentrosymmetric structure of (II). The noncentrosymmetric character of the structure of (II) was confirmed by SHG signal (1.2 units relative to an α-quartz powder sample).     

Synthesis, crystal structure, and preliminary study of luminescent properties of InTbGe2O7

A new indium terbium germanate InTbGe₂O₇, which is a member of the thortveitite family, was prepared as a polycrystalline powder material by high-temperature solid-state reaction. This new compound crystallizes in the monoclinic system, space group C2/c (No. 15), with unit cell parameters a=6.8818(2) Å, b=8.8774(3) Å, c=9.7892(4) Å, β=101.401(1)°, V=586.25(4) ų and Z=4. Its structure was characterized by Rietveld refinement of powder laboratory X-ray diffraction data. It consists of octahedral sheets that are held together by sheets of isolated Ge₂O₇ diorthogroups composed of two tetrahedra sharing a common vertex. It contains only one octahedral site occupied by In³⁺ and Tb⁺³ cations. The characteristic mirror plane in the thortveitite (Sc₂Si₂O₇) space group (C2/m, No. 12) is not present in this new compound. Besides, in InTbGe₂O₇, the Ge–O–Ge angle bridging two diorthogroups is 156.8(2)° as compared to the one in thortveitite, which is 180°. On the other hand, luminescent properties were observed when it is excited with 376.5 nm wavelength. The luminescence spectrum shows typical transitions from the ⁵D₄ multiplet belonging to the trivalent terbium ion.     

Comparative evolved gas analytical and structural study on trans-diammine-bis(nitrito)-palladium(II) and platinum(II) by TG/DTA–MS, TG–FTIR, and single crystal X-ray diffraction

Detailed study on identification and thermal decomposition of solid title compounds 1 and 2 crystallized from the used aqueous ammonia solutions of Pd(NH₃)₂(NO₂)₂ and Pt(NH₃)₂(NO₂)₂, has been carried out. Beyond the composition of complexes 1 and 2, their trans square planar configuration have already been recognized by reference IR spectra and powder XRD patterns, nevertheless their exact molecular and crystal structure as of trans-Pd(NH₃)₂(NO₂)₂ (1, Pd-NN) and trans-Pt(NH₃)₂(NO₂)₂ (2, Pt-NN) has been determined by single crystal X-ray diffraction (R = 0.0515 and 0.0341), respectively. Despite their compositional and configuration analogy, they crystallize in different crystal systems and space groups. The crystals of 1 (Pd-NN) are triclinic (space group No. 2, P-1, a = 5.003(1) Å, b = 5.419(1) Å, c = 6.317(1) Å, α = 91.34(2)°, β = 111.890(10)°, γ = 100.380(10)°), while those of 2 (Pt-NN) are monoclinic (space group No. 5, C2, a = 7.4235(16) Å, b = 9.130(2) Å, c = 4.4847(10) Å, β = 99.405(7)°).The pyrolytic processes of 1 and 2 (which might be sensitive to shock and heat) have been followed by simultaneous thermogravimetric and differential thermal analysis (TG/DTA), while the evolved gaseous species have been traced in situ by online coupled TG/DTA–EGA–MS and TG–EGA–FTIR instruments in He and air. Pd and Pt powders, forming as final solid products in single step, are captured and checked by TG and XRD. Whilst the unified evolved gas analyses report evolution of N₂, H₂O, NH₃, N₂O, NO, and NO₂ gases as gaseous product components in the exothermic decomposition of both trans-Pd(NH₃)₂(NO₂)₂ (1) and trans-Pt(NH₃)₂(NO₂)₂ (2) starting from ca. 230 and 220 °C, in sealed crucibles with a pinhole on the top, respectively.     

Synthesis, crystal structures, phase transition characterization and thermal decomposition of a new dabcodiium hexaaquairon(II) bis(sulfate): (C6H14N2)[Fe(H2O)6](SO4)2

The crystal structures of 1,4-diazabicyclo[2.2.2]octane (dabco)-templated iron sulfate, (C₆H₁₄N₂)[Fe(H₂O)₆](SO₄)₂, were determined at room temperature and at −173 °C from single-crystal X-ray diffraction. At 20 °C, it crystallises in the monoclinic symmetry, centrosymmetric space group P2₁/n, Z=2, a=7.964(5), b=9.100(5), c=12.065(5) Å, β=95.426(5)° and V=870.5(8) ų. The structure consists of [Fe(H₂O)₆]²⁺ and disordered (C₆H₁₄N₂)²⁺ cations and (SO₄)²⁻ anions connected together by an extensive three-dimensional H-bond network. The title compound undergoes a reversible phase transition of the first-order at −2.3 °C, characterized by DSC, dielectric measurement and optical observations, that suggests a relaxor–ferroelectric behavior. Below the transition temperature, the compound crystallizes in the monoclinic system, non-centrosymmetric space group Cc, with eight times the volume of the ambient phase: a=15.883(3), b=36.409(7), c=13.747(3) Å, β=120.2304(8)°, Z=16 and V=6868.7(2) ų. The organic moiety is then fully ordered within a supramolecular structure. Thermodiffractometry and thermogravimetric analyses indicate that its decomposition proceeds through three stages giving rise to the iron oxide.     

Tetrameric O–HO hydrogen-bond systems accompanied by C–HO hydrogen-bonds in the crystal of 1,4-bis(hydroxymethyl)triptycene: an X-ray study

The crystal structure of the title compound was determined (crystal data at 143 K: triclinic, space group P−1, Z=4, a=9.538(2) Å, b=11.638(2) Å, c=14.473(2) Å, α=88.647(3)°, β=89.875(3)°, γ=83.835(3)°, V=1596.9(4) ų). In the crystal there exist two kinds of tetrameric O–HO hydrogen-bond (H-bond) systems that are quite similar to each other. The oxygen atoms accept also intermolecular C–HO H-bonds. The two types of the H-bonds connect the molecules to an infinite two-dimensional supramolecular unit, the stacking of which is aided by an intermolecular C–Hπ H-bond. A phase transition with ΔH_t=4.4±0.1 kJ/mol was found at around 420 K.     

Preparation and characterization of a novel hybrid magnetic semiconductor containing rare, one-dimensional mixed-iodide/chloride anion of lead(II)

A new hybrid inorganic–organic magnetic semiconductor [Ni(bipy)₃Pb₂I_4.84Cl_1.16·DMF]_n (bipy=2,2′-bipyridine) containing novel one-dimensional mixed-halide anion of lead(II) was synthesized by reactions of PbI₂, NaI, NiCl₂ and bipy in DMF solution, and structurally characterized by single-crystal X-ray diffraction. It crystallizes in the space group C2/c with a=29.260(8) Å, b=15.602(4) Å, c=23.695(6) Å, β=126.815(°), Z=8, V=8660(4) Å³ and consists of a magnetic cation [Ni(bipy)₃]²⁺ in addition to one-dimensional mixed-halide anion, which is built up of face-sharing [PbX₆] octahedra. Of the seven crystallographically independent halide sites in this anion, one and five are occupied by Cl and I, respectively, the remaining one has mixed-iodide and -chloride occupancy. The title yellow compound has an optical bandgap of 2.59 eV, and the variable-temperature magnetic susceptibility measurement indicates paramagnetic behavior.     

Synthesis and characterization of [Zn(2,2′-bipy)]2(H2PO3)4: A neutral zinc phosphite cluster containing ZnO3N2 and H2PO3 units

The hydrothermal synthesis, crystal structure and some properties of a zinc phosphite with a neutral cluster, [Zn(2,2′-bipy)]₂(H₂PO₃)₄, are reported. This compound crystallizes in the triclinic system of space group P-1 (No. 2), a=8.3067(5) Å, b=8.9545(4) Å, c=10.0893(6) Å, α=95.448(2)°, β=99.7530(10)°, γ=103.461(2)°, V=712.23(7) ų, Z=1. The cluster consists of 4-membered rings formed by alternating ZnO₃N₂ square pyramids and H₂PO₃ pseudo pyramids, with two “hanging” H₂PO₃ groups attached to each of the Zn centers. The clusters are linked together by extensive multipoint hydrogen bonding involving the phosphite units to form a sheet-like structure. This compound represents the first example of zinc phosphite with P---OH bonds. An intense photoluminescence was observed from this compound upon photoexcitation at 388 nm.     

Molybdenum(VI) network polymers based on anion–π interaction and hydrogen bonding: Synthesis, crystal structures and oxidation catalytic application

A crystallographic investigation of anion–π interactions and hydrogen bonds on the preferred structural motifs of molybdenum(VI) complexes has been carried out. Two molybdenum(VI) network polymers MoO₂F₄·(Hinca)₂ (1) and MoO₂F₃(H₂O)·(Hinpa) (2), where inca = isonicotinamide and inpa = isonipecotamide, have been synthesized, crystallographically characterized and successfully applied to alcohol oxidation reaction. Complex 1 crystallizes in the monoclinic space C2/c: a = 16.832(3) Å, b = 8.8189(15) Å, c = 12.568(2) Å, β = 118.929(3)°, V = 1560.1(5) Å³, Z = 4. Complex 2 crystallizes in the triclinic space P-1: a = 5.459(2) Å, b = 9.189(4) Å, c = 12.204(5) Å, α = 71.341(6)°, β = 81.712(7)°, γ = 77.705(7)°, V = 564.8(4) Å³, Z = 2. Complex 1 consists of hydrogen bonding and anion–π interactions, both of which are considered as important factors for controlling the geometric features and packing characteristics of the crystal structure. The geometry of the sandwich complex of [MoO₂F₄]²⁻ with two pyridine rings indicates that the anion–π interaction is an additive and provides a base for the design and synthesis of new complexes. For complex 2, the anions and the protonated inpa ligands form a 2D supramolecular network by four different types of hydrogen contacts (N–HF, N–HO, O–HF and O–HO). The catalytic ability of complexes 1 and 2 has also been evaluated by applying them to the oxidation of benzyl alcohol with TBHP as oxidant.     

Structure and dehydration of layered perovskite niobate with bilayer hydrates prepared by exfoliation/self-assembly process

The crystals of an H-form niobate of HCa₂Nb₃O₁₀·xH₂O (x=0.5) being tetragonal symmetry (space group P4/mbm) with unit cell parameters a=5.4521(6) and c=14.414(2) Å were exfoliated into nanosheets with the triple-layered perovskite structure. The colloid suspension of the nanosheets was put into dialysis membrane tubing and allowed self-assembly in a dilute KCl solution. By this method, a novel layered K-form niobate KCa₂Nb₃O₁₀·xH₂O (x=1.3, typically) with bilayer hydrates in the interlayer was produced. The Rieveld refinement and transmission electron microscope (TEM)/selected-area electron diffraction (SAED) observation indicated that the orientations of the a-/b-axis of each nanosheet as well as the c-axis are uniform, and the self-assembled compound had the same symmetry, tetragonal (P4/mbm) with a=5.453(2) and c=16.876(5) Å, as the H-form precursor; the exfoliation/self-assembly process does not markedly affect the two-dimensional lattice of the layer. The large basal spacing resulted from the interlayer K⁺ ions solvated by two layers of water molecules. The interlayer bilayers-water was gradually changed to monolayer when the temperatures higher than 100 °C, and all the water molecules lost when over 600 °C. Accompanying the dehydration, the crystal structure transformed from tetragonal to orthorhombic symmetry. Water molecules may take an important role for the layer layered compound to adjust the unit cell to tetragonal symmetry.     

Crystallographic and theoretical study of phenyl 2,3,4,6-tetra-O-acetyl-1-thio-α-D-mannopyranoside

The thiomannoside is a key intermediate in the synthesis of polymannosaccharide. But its crystallographic study has not been reported. X-ray crystal structure analysis shows that the crystal of phenyl 2,3,4,6-tetra-O-acetyl-1-thio-α-D-mannopyranoside is in orthorhombic system, has P2₁2₁2₁ space group. Its unit cell dimensions are a=9.1731(11), b=11.574(2), and c=21.199(3) Å, α=β=γ=90.00°, Z=4, V=2250.6(6) ų, D_c=1.300 g/cm³. The crystallographic study reveals that the thiomannoside is an α-anomer. Most interestingly, the structure provides an evidence of existing C–HO and C–HS intramolecular and intermolecular hydrogen bonds.     

An XRPD ab-initio structural determination of La2RuO5

The crystal structure of a new oxide, La₂RuO₅, was determined ab initio using conventional laboratory X-ray powder diffraction. Combining X-ray and electron diffraction techniques, we found that the new phase crystallized in the monoclinic system with the space group P2₁/c (SG no.14) and the cell parameters a=9.1878(2) Å, b=5.8313(2) Å, c=7.9575(2) Å and β=100.773(2)° (V=418.8 ų, Z=4). The structural determination with the Patterson method and Fourier difference syntheses and the final Rietveld refinement were performed by means of the JANA2000 program. The structure is built up from the regular stacking of a two octahedra thick [LaRuO₄]_∞ zigzag perovskite slab and an original 3.4 Å thick [LaO]_∞ slab which constitutes the key feature of this new structure.     

Crystal structure, thermal analysis and IR spectrometric investigation of L-tyrosine hydrazide sulfate

Chemical preparation, X-ray single crystal, thermal analysis and IR spectrometric investigation of (C₉H₁₅N₃O₂)SO₄ denoted LTHS are described. The LTHS crystallizes in the monoclinic system with P2₁ space group. Its unit cell dimensions are a=5.5386(1) Å, b=8.0467(4) Å, c=14.0780(6) Å, β=93.339(3)° with V=626.36(4) Å³ and Z=2. The structure has been solved using direct method and refined to a reliability R factor of 0.0212. The LTHS structure is built up from organic chains parallel to the b axis, linked via N---H…O hydrogen bonds and interconnected by inorganic groups so as to build a three-dimensional arrangement.     

The crystal structure, vibrational spectra, and thermal behavior of dilithium piperazinium(2+) selenate tetrahydrate and dilithium N,N′-dimethylpiperazinium(2+) selenate tetrahydrate

The crystal structure of dilithium piperazinium(2+) selenate tetrahydrate has been solved; this substance crystallizes in the triclinic space group , a=7.931(2) Å, b=7.974(2) Å, c=7.991(2) Å, α=106.99(2)°, β=101.83(2)°, γ=119.28(2)° Z=1, R=0.0280 for 1489 observed reflections. A similar compound, dilithium N,N′-dimethylpiperazinium(2+) selenate tetrahydrate crystallizes in a monoclinic system with space group P2₁/c and lattice parameters a=7.338(1) Å, b=8.792(2) Å, c=12.856(1) Å, β=92.04(2)°, Z=2, R=0.0334 for 1462 observed reflections. Both structures are centrosymmetric with center of symmetry in the center of eight membered ring formed with two SeO₄ tetrahedra and two LiO₄ tetrahedra connected through tops. The two remaining oxygens on each Li atom come from water molecules. The FTIR and FT Raman spectra of both natural and N,O-deuterated substances have been measured and studied. The thermoanalytical properties were studied using TG, DTG and DTA methods in the temperature range 293–873 K for piperazinium derivative and in the range 293–523 K for dimethylpiperazinium derivative. DSC measurements were carried out in the temperature range 95–343 K. No phase transition was found in this temperature region for either of the compounds.     

Formation of helix-containing rods in a hybrid inorganic–organic material

The novel aluminum ethylenediphosphonate fluoride, [HN(CH₂CH₂NH₃)₃][Al₂(O₃PCH₂CH₂PO₃)₂F₂]·H₂O (1) (monoclinic, P2₁/n, a=12.145(4) Å, b=9.265(3) Å, c=20.422(6) Å, β=104.952(4)°, Z=3, R₁=0.092, wR₂=0.196) has been synthesized by solvothermal methods in the presence of tris(2-aminoethyl)amine and its structure determined using single microcrystal X-ray diffraction data. Compound 1 is a one-dimensional extended chain structure composed of well-separated anionic [Al₂(O₃PCH₂CH₂PO₃)₂F₂]⁴⁻ rods containing helical chains of corner-shared cis-AlO₄F₂ octahedra at their core. The charge-compensating tris(2-aminoethyl)ammonium cations separate the anionic [Al₂(O₃PCH₂CH₂PO₃)₂F₂]⁴⁻ rods that contain either left- or right-handed helical chains. The incorporation of the organic components into this hybrid material has aided the adoption of one-dimensionality by the compound and defined the pitch of the helical AlO₄F chain.