Sintering mechanism of CaO during carbonation reaction in the presence of water vapor

In this paper, CaO sintering in the presence of water vapor for CO₂ capture were carried out by ReaxFF(Reactive Force Field) molecular dynamics. The CaO sintering model was simulated at different temperatures (873 K-1273 K) and atmospheres (CO₂, H₂O), respectively. The results showed that water vapor could significantly promote the sintering process of CO₂ capture by CaO. The Mean-square displacement (MSD) and Boltzmann–Arrhenius dependency were used to study the diffusion properties of CaO particles. The decreased diffusion activation Ea and increased pre-exponential factor D₀ indicate that CaO particles have a stronger initial diffusivity and a lower diffusion barrier in the presence of CO₂ and H₂O. The inner and outer regions of CaO atoms were analyzed and it was found that the activation energy is the main factor to enhance the diffusion in the presence of CO₂ for CaO sintering process, whereas the pre-exponential factor dominates with both CO₂ and H₂O. Water vapor enhanced the sintering pf CaO carbonation reaction is mainly achieved by promoting atoms in the inner layers of CaO particles. The types and numbers of sintering atoms during the sintering process were counted, and the distances between Ca and O atoms were calculated, which found that water vapor first dissociates into hydroxyl and H protons on the CaO surface, and the hydroxyl group will stay on the surface of CaO and combine with CO₂, while the H proton will combine with O inside CaO to promote the sintering of CaO further.     

Effect of calcination conditions on lithium conductivity in Li<Subscript>1.3</Subscript>Ti<Subscript>1.7</Subscript>Al<Subscript>0.3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> prepared by sol-gel route

In order to study the influence of powder calcination temperature on lithium ion conductivity, synthesized Li_1.3Ti_1.7Al_0.3(PO₄)₃ (LATP) was calcined at temperatures between 750 and 900 °C. The shape and size of the particles were characterized employing scanning electron microscopy (SEM), and specific surface area of the obtained powder was measured. The crystallinity grade of different heat-treated powders was calculated from XRD spectra. Posteriorly, all powders were sintered at 1100 °C employing field-assisted sintering (SPS), and the electrical properties were correlated to the calcination conditions. The highest ionic conductivity was observed for samples made out of powders calcined at 900 °C.     

Genesis,structural, and transport properties of La<Subscript>2</Subscript>Mo<Subscript>2-x</Subscript>W<Subscript>x</Subscript>O<Subscript>9</Subscript> prepared via mechanochemical activation

Fast oxide-ion conductors La₂Mo_2-xW_xO₉ (x = 0–1) have been prepared using mechanochemical activation (MA) of starting oxides in a high-power planetary ball mill. Studies of La₂Mo_2-xW_xO₉ genesis and structural properties using thermal analysis, XRD, SEM, IR, and Raman spectroscopy have revealed that MA results in the formation of an amorphous precursor, while the cubic β-phase is formed after calcination at 700–900 °C. Due to a high dispersion of powders, high-density pellets of W-LAMOX ceramics have been obtained already after sintering at 950 °C. Their electrical conductivity measured by the impedance spectroscopy depends on the W concentration being sufficiently high (up to 5.6?10^?3 S/cm at 630 °C) at temperatures below 650 °C.     

Synthesis and electrochemical performance of spherical LiNi<Subscript>0.8</Subscript>Co<Subscript>0.15</Subscript>Ti<Subscript>0.05</Subscript>O<Subscript>2</Subscript> cathode materials with high tap density

A series of spherical LiNi_0.8Co_0.15Ti_0.05O₂ cathode materials were synthesized through co-oxidation-controlled crystallization method followed by solid-state reaction at different calcination temperatures under oxygen flowing. The crystal structure and particles morphology of the as-prepared powders were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. All samples correspond to the layered α-NaFeO₂ structure with R-3m space group. The LiNi_0.8Co_0.15Ti_0.05O₂ prepared at 800 °C presents a better hexagonal ordering structure and better spherical particles and possesses a high tap density of 3.22 g cm^?3. Meanwhile, the NCT-2 sample exhibits an advanced electrochemical performance with an initial discharge capacity of 174.2 mAh g^?1 and capacity retention of 86.7 % after 30 cycles at 0.2 C.     

Synthesis and electrochemical properties of P2-Na<Subscript>2/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>2/3</Subscript>O<Subscript>2</Subscript>

The pure phase P2-Na_2/3Ni_1/3Mn_2/3O₂ was synthesized by a solid reaction process. The optimum calcination temperature was 850 °C. The as-prepared product delivered a capacity of 158 mAh g^?1 in the voltage range of 2–4.5 V, and there was a phase transition from P2 to O2 at about 4.2 V in the charge process. The P2 phase exhibited excellent intercalation behavior of Na ions. The reversible capacity is about 88.5 mAh g^?1 at 0.1 C in the voltage range of 2–4 V at room temperature. At an elevated temperature of 55 °C, it could remain as an excellent capacity retention at low current rates. The P2-Na_2/3Ni_1/3Mn_2/3O₂ is a potential cathode material for sodium-ion batteries.     

Effects of different precipitants on LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> for lithium ion batteries prepared by modified co-precipitation method

Effects of two different precipitants of Na₂CO₃ and Na₂C₂O₄ on LiNi_0.5Mn_1.5O₄ (LNMO) cathode materials, which are prepared by a modified co-precipitation method, have been investigated. Various measurements have been applied to characterize the physical and electrochemical performances of LNMO. Compared with the LNMO prepared by the oxalate co-precipitation (LNMO2), the material synthesized by the carbonate co-precipitation (LNMO1) not only shows more uniform porosity and smaller particles but also has a better rate capability and cycling performance. In addition, the sample prepared by carbonate has a stable spherical structure, due to the fact that carbonate co-precipitation with less gas release during calcination can prevent the destruction of the as-prepared LNMO material structure and promote the formation of regular particle and aperture. Based on the electrochemical test results, LNMO1 shows greatly enhanced electrochemical performance of a high initial discharge capacity of 125.6 mAh g^?1 at 0.25 °C, as well as a preferably capacity retention of 96.5% after 100 cycles at 0.5 °C. And even at a high rate of 10 °C, the discharge capacity of LNMO1-based cell still approaches 83.1 mAh g^?1.     

Influence of sol-gel precursors on the electrochemical performance of NaMn<Subscript>0.33</Subscript>Ni<Subscript>0.33</Subscript>Co<Subscript>0.33</Subscript>O<Subscript>2</Subscript> positive electrode for sodium-ion battery

Among the various cathode materials explored for sodium-ion batteries (SIBs), NaMn_0.33Ni_0.33Co_0.33O₂, with a layered oxide structure, is a promising material due to its high theoretical capacity (240 mAhg^?1). We have synthesized NaMn_0.33Ni_0.33Co_0.33O₂ using two different types of precursors, namely metal acetates and metal nitrates by the sol-gel method. XRD patterns confirm the formation of a stable phase of the material at 900 °C. Coupled TGA-FTIR analysis was used to optimize the calcination conditions and to understand the hydrolysis and condensation mechanism of the sol-gel precursors. FTIR spectra extracted at different temperatures reveal the polymer network-forming tendency of the acetate ligands whereas the polymerization is inhibited in the nitrate precursors. SEM analysis shows spherical and platelet morphologies of samples synthesized from nitrate and acetate precursors, respectively. Using in situ impedance and galvanostatic charge/discharge studies, we observed that the precursors used to synthesize the cathode material influence the electrochemical properties of the material, as in this case, where we observe a 20 % improvement in terms of capacity by using acetate precursors instead of nitrate precursors.     

Parallelepipedally shaped ZnCo<Subscript>2</Subscript>O<Subscript>4</Subscript> particles with a hierarchical porous structure as an anode for lithium-ion batteries

The micrometer-sized ZnCo₂O₄ parallelepipeds with a hierarchical porous structure have been fabricated by a simple two-step procedure, i.e., the synthesis of the Zn_1/3Co_2/3CO₃ parallelepipeds and the subsequent calcination. When tested in lithium-ion batteries (LIBs), the hierarchical porous ZnCo₂O₄ parallelepipeds could exhibit a reversible capacity of >860 mAh g^?1 at a current density of 0.1 C. This clearly demonstrates the potential use of the hierarchical porous ZnCo₂O₄ parallelepipeds in LIBs. The high electrochemical performance of the hierarchical porous ZnCo₂O₄ parallelepipeds might originate from the unique porous structure which consists of the secondary ZnCo₂O₄ particles. First, the porous structure allows for a better accessibility of the active material to the Li⁺ ion storage, favoring easier diffusion of electrolyte in and out of electrode material. Second, the presence of the secondary particles shortens a pathway of Li⁺ diffusion in ZnCo₂O₄, facilitating the better utilization of the active material.     

Thermal properties and ionic conductivity of Li<Subscript>1,3</Subscript>Ti<Subscript>1,7</Subscript>Al<Subscript>0,3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> solid electrolytes sintered by field-assisted sintering

Li_1,3Ti_0,7Al_0,3(PO₄)₃ (LATP) powder was obtained by a conventional melt-quenching method and consolidated by field-assisted sintering technology (FAST) at different temperatures. Using this technique, the samples could be sintered to relative densities in the range of 93 to 99 % depending on the sintering conditions. Ionic and thermal conductivity were measured and the results are discussed under consideration of XRD and SEM analyses. Thermal conductivity values of 2 W/mK and ionic conductivities of 4?×?10^?4 Scm^?1 at room temperature were obtained using relatively large particles and a sintering temperature of 1000 °C at an applied uniaxial pressure of 50 MPa.     

Investigation on the electrochemical performances of Li<Subscript>4</Subscript>Mn<Subscript>5</Subscript>O<Subscript>12</Subscript> for battery applications

In this study, well-crystallized Li₄Mn₅O₁₂ powder was synthesized by a self-propagating combustion method using citric acid as a reducing agent. Various conditions were studied in order to find the optimal conditions for the synthesis of pure Li₄Mn₅O₁₂. The precursor obtained was then annealed at different temperatures for 24 h in a furnace. X-ray diffraction results showed that Li₄Mn₅O₁₂ crystallite is stable at relatively low temperature of 400 °C but decompose to spinel LiMn₂O₄ and monoclinic Li₂MnO₃ at temperatures higher than 500 °C. The prepared samples were also characterized by FESEM and charge-discharge tests. The result showed that the specific capacity of 70.7 mAh/g was obtained within potential range of 4.2 to 2.5 V at constant current of 1.0 mA. The electrochemical performances of Li₄Mn₅O₁₂ material was further discussed in this paper.     

Vertical aligned V<Subscript>2</Subscript>O<Subscript>5</Subscript> nanoneedle arrays grown on Ti substrate as binder-free cathode for lithium-ion batteries

V₂O₅ nanoneedle arrays were grown directly on titanium (Ti) substrate by a facile solvothermal route followed with calcination at 350 °C for 2 h. The as-prepared V₂O₅ nanoneedles are about 50 nm in diameter and 800 nm in length. The electrochemical behavior of V₂O₅ nanoarrays as binder-free cathode for lithium-ion batteries (LIBs) was evaluated by cyclic voltammetry and galvanostatic discharge/charge tests. Compared with V₂O₅ powder electrode, V₂O₅ nanoneedle arrays electrode exhibited improved electrochemical performance in terms of high discharge capacity of 262.5 mA h g^?1 between 2.0 and 4.0 V at 0.2 C, and high capacity retention up to 77.1% after 100 cycles. Under a high current rate of 2 C, a discharge capacity of about 175.6 mA h g^?1 can be maintained. The enhanced performance are mainly due to the intimate contact between V₂O₅ nanoneedle active material and current collector, which enable shortened electron transfer pathway and improved charge transfer kinetics, demonstrating their potential applications in high rate electrochemical storage devices.     

Cauliflower-derived porous carbon without activation for electrochemical capacitor and CO<Subscript>2</Subscript> capture applications

Carbon materials have attracted great attention in CO₂ capture and energy storage due to their excellent characteristics such as tunable pore structure, modulated surface properties and superior bulk conductivities, etc. Biomass, provided by nature with non-toxic, widespread, abundant, and sustainable advantages, is considered to be a very promising precursor of carbons for the view of economic, environmental, and societal issues. However, the preparation of high-performance biomass-derived carbons is still a big challenge because of the multistep process for their synthesis and subsequent activation. Herein, hierarchically porous structured carbon materials have been prepared by directly carbonizing dried cauliflowers without any addition of agents and activation process, featuring with large specific surface area, hierarchically porous structure and improved pore volume, as well as suitable nitrogen content. Being used as a solid-state CO₂ adsorbent, the obtained product exhibited a high CO₂ adsorption capacity of 3.1 mmol g^?1 under 1 bar and 25 °C and a remarkable reusability of 96.7% retention after 20 adsorption/regeneration cycles. Our study reveals that choosing a good biomass source was significant as the unique structure of precursor endows the carbonized product with abundant pores without the need of any post-treatment. Used as an electrode material in electrochemical capacitor, the non-activated porous carbon displayed a fairly high specific capacitance of 228.9 F g^?1 at 0.5 A g^?1 and an outstanding stability of 99.2% retention after 5000 cycles at 5 A g^?1.

Open image in new window

Graphical abstract Hierarchically porous structured carbon materials are prepared by directly carbonizing dried cauliflower without any agents and process of activation for high performance of CO₂ capture and capacitor.

     

Hierarchical porous ZnMn<Subscript>2</Subscript>O<Subscript>4</Subscript> synthesized by the sucrose-assisted combustion method for high-rate supercapacitors

A simple sucrose-assisted combustion and subsequent high-temperature calcination route have been employed to prepare hierarchical porous ZnMn₂O₄ nanostructure. When used as an electrode for supercapacitor, the ZnMn₂O₄ electrode displays a high specific capacitance of 411.75 F g^?1 at a current density of 1 A g^?1, remarkable capacitance retention rate of 64.28 % at current density of 32 A g^?1 compared with 1 A g^?1, as well as excellent cycle stability (reversible capacity retention of 88.32 % after 4000 cycles). The outstanding electrochemical performances are mainly attributed to its hierarchical porous architecture, which provides large reaction surface area, fast ion and electron transfer, and good structure stability. All these impressive results demonstrate that ZnMn₂O₄ shows promise for its application in supercapacitors.     

Preparation of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode materials by electrospinning

LiNi_0.5Mn_1.5O₄ cathode material was prepared by electrospinning using lithium hydroxide, manganese acetate, nickel acetate, acetic acid, ethanol, and poly(vinyl pyrrolidone) as raw materials. The effect of calcination temperature on the structure, morphology, and electrochemical properties was investigated. XRD results indicate that the LiNi_0.5Mn_1.5O₄ composite is well crystallized as a spinel structure at calcination temperature of 650 °C for 3 h. SEM results reveal that this composite has a nanofiber shape with average size of about 300–500 nm. Electrochemical performance tests reveal that this composite shows the initial discharge capacity of 127.8 and 105 mAhg^?1 at 0.1 and 3 C rates, respectively, and exhibits good cycling performance.     

A comparative study of Li<Subscript>2</Subscript>CO<Subscript>3</Subscript> modified carbon microbead anodes prepared by different synthetic routes for lithium-ion battery

Li₂CO₃ modified carbon microbead composites (LCO/CMB-T) with different covering amount are prepared by solvent evaporation and dipping method. LiCH₃COO are first used as lithium source, which can provide a precise control of Li₂CO₃ amount through varying dipping times or solution concentration. The morphology, structure, and covering amount are characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), and atomic absorption spectrometer (AAS). The dipping process can produce the samples with better surface coverage, more uniform coating, and higher Li₂CO₃ crystallinity, while the appropriate amount of Li₂CO₃ can help to decrease initial irreversible capacity and improve cell performance. Here, the sample with 1.07 % Li₂CO₃ prepared by dipping method shows the highest initial discharge capacity of 353.7 mAh g^?1 and coulombic efficiency of 89.5 %. The capacity retention is up to 82.1 % after 30 cycles.     

Fabrication of urchin-like NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> microspheres assembled by using SDS as soft template for anode materials of Lithium-ion batteries

In this paper, the urchin-like NiCo₂O₄ microspheres assembled by using sodium dodecyl sulfate (SDS) as soft template are successfully fabricated by a facile procedure including microemulsion-solvothermal reaction and subsequent calcination at 400 °C for 4 h. The structure and morphology of synthesized NiCo₂O₄ particles are investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). It has been clearly revealed that the prepared three-dimensional urchin-like NiCo₂O₄ microspheres are constituted by one-dimension nanowires. As it is applied to anode for lithium-ion batteries (LIBs), the initial coulombic efficiency is up to 75.7%, and the specific reversible capacity retains up to 1034.2 mAh/g even after 40 cycles at a current density of 100 mA/g. Furthermore, as the current density gradually increases to 800 mA/g, it still delivers the reversible capacity of 895.4 mAh/g. The high reversible specific capacity, perfect cyclability, and rate performance are attributed to the unique urchin-like NiCo₂O₄ microspheres, which can alleviate the volume expansion and shorten the diffusion path of ions and electrons during lithiation/delithiation process. The self-standing urchin-like NiCo₂O₄ microspheres may be a very promising candidate in place of the commercial graphite-based anode materials for high-performance LIBs.     

Structure,thermal behavior,and dielectric properties of new cesium hydrogen sulfate arsenate: Cs<Subscript>2</Subscript>(HSO<Subscript>4</Subscript>)(H<Subscript>2</Subscript>AsO<Subscript>4</Subscript>)

Synthesis and structural characterization by single-crystal X-ray diffraction method, thermal behavior, and electrical proprieties are given for a new compound with a superprotonic phase transition Cs₂(HSO₄)(H₂AsO₄). The title compound crystallizes in the monoclinic system with the P2₁/n space group. The structure contains zigzag chains of hydrogen-bonded anion tetrahedra that extend in the [010] direction. Each tetrahedron is additionally linked to a tetrahedron neighboring chain to give a planar structure with hydrogen-bonded sheets lying parallel to (10ī). The existence of O–H and (S/As)–O bonds in the structure at room temperature has been confirmed by IR and Raman spectroscopy in the frequency ranges 4000–400 cm^?1and 1200–50 cm^?1, respectively. Differential scanning calorimetry analysis of the superprotonic transition in Cs₂(HSO₄)(H₂AsO₄) showed that the transformation to high temperature phase occurs at 417 K by one-step process. Thermal decomposition of the product takes place at much higher temperatures, with an onset of approximately 534 K. The superprotonic transition was also studied by impedance and modulus spectroscopy techniques. The conductivity in the high temperature phase at 423 K is 1.58 × 10^?4 Ω^?1 cm^?1, and the activation energy for the proton transport is 0.28 eV. The conductivity relaxation parameters associated with the high disorder protonic conduction have been examined from analysis of the M”/M”_max spectrum measured in a wide temperature range. Transport properties of this material appear to be due to the proton hopping mechanism.     

Titanium-modified Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> with a synergistic effect of surface modifying,bulk doping,and size reducing

In this work, a one-step solid-phase sintering process via TiO₂ and Li₂CO₃ under an argon atmosphere, with ultra-fine titanium powder as the modifying agent, was used to prepare a nano-sized Li₄Ti₅O₁₂/Ti composite (denoted as LTO–Ti) at 800 °C. The introduction of ultra-fine metal titanium powder played an important role. First, X-ray photoelectron spectroscopy demonstrates that Ti⁴⁺ was partially changed into Ti³⁺, through the reduction of the ultra-fine metal titanium powder. Second, X-ray diffraction revealed that the ultra-fine metal titanium powder did not react with the bulk structure of Li₄Ti₅O₁₂, while some pure titanium peaks could be seen. Additionally, the size of LTO–Ti particles could be significantly reduced from micro-scale to nano-scale. The structure and morphology of LTO–Ti were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Electrochemical tests showed a charge/discharge current of 0.5, 1, 5, and 10 C; the discharge capacity of the LTO–Ti electrode was 170, 161, 140, and 111 mAh g^?1. It is believed that the designed LTO–Ti composite makes full use of both components, thus offering a large contact area between the electrolyte and electrode, high electrical conductivity, and lithium-ion diffusion coefficient during electrochemical processes. Furthermore, ultra-fine titanium powder, as the modifying agent, is amenable to large-scale production.     

Controlled synthesis of photoluminescent Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> nanoparticles from metal-organic polymeric precursor

Bi₄Ti₃O₁₂ (BIT) nanoparticles with a narrow average particle size distribution in the range of 11–46 nm was synthesized via a metal-organic polymeric precursor process. The crystallite size and lattice parameter of BIT were determined by XRD analysis. At annealing temperatures >550 °C, the orthorhombic BIT compound with lattice parameters a = 5.4489 Å, b = 5.4147 Å, and c = 32.8362 Å was formed while at lower annealing temperatures orthorhombicity was absent. Reaction proceeded via the formation of an intermediate phase at 500 °C with a stoichiometry close to Bi₂Ti₂O₇. The particle size and the agglomerates of the primary particles have been confirmed by FESEM and TEM. The decomposition of the polymeric gel was ascertained in order to evaluate the crystallization process from TG-DSC analysis. Raman spectroscopy was used to investigate the lattice dynamics in BIT nanoparticles. In addition, investigation of the dependence of the visible emission band around the blue–green color emission on annealing temperatures and grain sizes showed that the effect of grain size plays important roles, and that oxygen vacancies may act as the radiative centers responsible for the observed visible emission band.     

Semiconducting SnO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> (S-T) composites for detection of SO<Subscript>2</Subscript> gas

SnO₂-TiO₂ (S-T) composites with different molar ratios were prepared by mechanical mixing followed by sintering at 700 °C for 4 h in air. The structural and microstructural properties of the composites were investigated using powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). S-T composites were investigated by introducing SO₂ to test their chemical stability using PXRD and SEM coupled with energy dispersive X-ray (EDX) analysis. The sensing performance was measured at different temperatures using various SO₂ concentrations (10–100 ppm). A composite comprising 25 mol% of SnO₂ and 75 mol% TiO₂ (S25-T75) exhibited the highest sensitivity comparing to other S-T composites studied under the presently investigated conditions. t ₉₀ (90 % of response time) was found to be ～5 min for thick pellet (~2 mm in thickness). SO₂ sensing mechanism has been explained through the band structure model.