Sm3+-doped SrSnO3 (SrSnO3:Sm3+) nanopowders were synthesized by a simple hydrothermal method and followed by a heat treatment process. The as-synthesized nanopowders were assembled in dye-sensitized solar cells (DSSCs) to investigate their photoelectric properties. X-ray diffraction (XRD), scanning electron microscope (SEM), and energy-dispersive spectrometer (EDS) confirmed the formation of SrSnO3:Sm3+ nanopowders with perovskite structure. The ultraviolet-visible absorption spectra and photoluminescence spectra indicate a down-conversion from ultraviolet light to visible light which matches the strong absorption region of the N719 dye. The DSSC based on SrSnO3:Sm3+ photo-anode improved its photoelectric conversion efficiency (η) via the down-conversion of doped Sm3+. Under the irradiation of the simulated sunlight with 100 mW/cm2, the DSSC based on SrSnO3 doping with Sm3+ of 0.6 wt% showed the highest η of 1.54%, which improved 71.11% compared with the DSSC based on pure SrSnO3.
Europium ion-doped CdSe hybrid nanocrystals (CdSe:Eu3+ NCs) as a class of new luminescent materials have drawn increasing attention in recent years owing to their remarkable optical properties. In this paper, we report a facile method to prepare CdSe:Eu3+ NCs using oleic acid (OA) as the capping agent. With this non-injection and one-pot synthesized approach, the formation and surface passivation of CdSe:Eu3+ NCs are performed simultaneously and result in intrinsic luminescence. The as-prepared CdSe:Eu3+ NCs are characterized by transmission electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy (EDX). Their optical properties are also studied by UV–vis and photoluminescence spectra. Moreover, the effects of feed ratios and reaction temperatures on the optical properties are further investigated. The results show that the luminescent spectra of CdSe:Eu3+ NCs are tunable from green (490 nm) to red (630 nm) and gradually redshift with the increase of the nanoparticle size from 2.5 to 4.4 nm. Upon decoration with 2-thenoyltrifluoroacetone (TTA), the luminescence of europium ion drastically increases and efficient energy transfer from CdSe host to the europium ion is proposed. In addition, an MTT and apoptosis assay show CdSe:Eu3+ NCs have low cellular toxicity and could be used as fluorescence imaging for human epithelial type 2 (Hep-2) cells. These properties make CdSe:Eu3+ NCs a potential candidate for biological labeling, immunoassays, and optical sensing.
Graphical abstract Stable and luminescent CdSe:Eu3+ hybrid nanocrystals were synthesized, and the luminescence is tunable from green to red by the variation of reaction temperatures and feed ratios. Moreover, CdSe:Eu3+ NCs show low cellular toxicity and could be used as fluorescence probes for Hep-2 cells.
In the synthesis of nanostructures by pulsed laser deposition (PLD), a crucial role is played by the environmental deposition pressure and the substrate temperature. Due to the high temperature of nanoparticles (NPs) at landing, other factors may determine the structure of the resulting aggregates. Here, Au and TiO2 nanostructures are obtained by non-thermal fs-PLD in ambient conditions. On Si(100), only TiO2 NPs form fractals with areas up to ~ 1 × 106 nm2, while on quartz Au NPs also form fractals with areas up to ~ 5 × 103 nm2, a much smaller size with respect to the TiO2 case. The aggregation is described by a simple diffusive model, taking into account isotropic diffusion of the NPs, allowing quantitative simulations of the NPs and fractal area. The results highlight the key role of substrate thermal conductivity in determining the formation of fractals.
In this paper, the green synthesis of fluorescent carbon dots (CDs) via one-step hydrothermal treatment of cornstalk was investigated. This approach is facile, economical, and effective. The obtained CDs with an average diameter of 5.2 nm possess many excellent properties such as emitting blue fluorescence under UV light (365 nm), high monodispersity, good stability, excellent water dispersibility, and absolute quantum yield of 7.6%. Then, these CDs were used as sensing probes for the detection of Fe2+ and H2O2 with detection limits as low as 0.18 and 0.21 μM, respectively. This sensing platform shows advantages such as high selectivity, good precision, rapid operation, and avoiding the precipitation of iron oxyhydroxides.
In this study Pt, Re, and SnO2 nanoparticles (NPs) were combined in a controlled manner into binary and ternary combinations for a possible application for ethanol oxidation. For this purpose, zeta potentials as a function of the pH of the individual NPs solutions were measured. In order to successfully combine the NPs into Pt/SnO2 and Re/SnO2 NPs, the solutions were mixed together at a pH guaranteeing opposite zeta potentials of the metal and oxide NPs. The individually synthesized NPs and their binary/ternary combinations were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning transmission electron microscopy (STEM) combined with energy dispersive X-ray spectroscopy (EDS) analysis. FTIR and XPS spectroscopy showed that the individually synthesized Pt and Re NPs are metallic and the Sn component was oxidized to SnO2. STEM showed that all NPs are well crystallized and the sizes of the Pt, Re, and SnO2 NPs were 2.2, 1.0, and 3.4 nm, respectively. Moreover, EDS analysis confirmed the successful formation of binary Pt/SnO2 and Re/SnO2 NP, as well as ternary Pt/Re/SnO2 NP combinations. This study shows that by controlling the zeta potential of individual metal and oxide NPs, it is possible to assemble them into binary and ternary combinations.
A facile and efficient one-pot method for the synthesis of well-dispersed hollow CuFe2O4 nanoparticles (H-CuFe2O4 NPs) in the presence of cellulose nanocrystals (CNC) as the support was described. Based on the one-pot solvothermal condition control, magnetic H-CuFe2O4 NPs were in-situ grown on the CNC surface uniformly. TEM images indicated good dispersity of H-CuFe2O4 NPs with uniform size of 300 nm. The catalytic activity of H-CuFe2O4/CNC was tested in the catalytic reduction of 4-nitrophenol (4-NP) in aqueous solution. Compared with most CNC-based ferrite catalysts, H-CuFe2O4/CNC catalyst exhibited an excellent catalytic activity toward the reduction of 4-NP. The catalytic performance of H-CuFe2O4/CNC catalyst was remarkably enhanced with the rate constant of 3.24 s?1 g?1, which was higher than H-CuFe2O4 NPs (0.50 s?1 g?1). The high catalytic activity was attributed to the introduction of CNC and the special hollow mesostructure of H-CuFe2O4 NPs. In addition, the H-CuFe2O4/CNC catalyst promised good conversion efficiency without significant decrease even after 10 cycles, confirming relatively high stability. Because of its environmental sustainability and magnetic separability, H-CuFe2O4/CNC catalyst was shown to indicate that the ferrite nanoparticles supported on CNC were acted as a promising catalyst and exhibited potential applications in numerous ferrite based catalytic reactions.
One-dimensional Ce3+-doped Li4Ti5O12 (Li4Ti5?xCexO12, x?=?0, 0.01, 0.02, and 0.05) sub-microbelts with the width of approximately 500 nm and thickness of about 200 nm have been synthesized via the facile electrospinning method. The structure and morphology of the as-prepared samples are characterized by XRD, TEM, SEM, BET, HRTEM, XPS, and AFM. Importantly, one-dimensional Li4Ti5O12 sub-microbelts can be well preserved with the introduction of Ce3+ ions, while CeO2 impurity is obtained when x is greater than or equal to 0.02. The comparative experiments prove that Ce3+-doped Li4Ti5O12 electrodes exhibit the brilliant electrochemical performance than undoped counterpart. Particularly, the reversible capacity of Li4Ti4.98Ce0.02O12 electrode reaches up to 139.9 mAh g?1 and still maintains at 132.6 mAh g?1 even after 100 cycles under the current rate of 4 C. The superior lithium storage properties of Li4Ti4.98Ce0.02O12 electrode could be attributed to their intrinsic structure advantage as well as enhanced overall conductivity.
Zirconia nanoparticles (ZrO2 NPs) have been extensively used in teeth and bone implants and thus get a chance to interact with the physiological system. The current study investigated the oral administration of various concentrations of ZrO2 NPs synthesized by the hydrothermal method (0.25 to 5.0 mg L?1) on Drosophila physiology and behaviour. The size of the currently studied nanoparticle varies from 10 to 12 nm. ZrO2 NPs accumulated within the gut in a concentration-dependent manner and generate reactive oxygen species (ROS) only at 2.5 and 5.0 mg L?1 concentrations. ROS was detected by nitroblue tetrazolium (NBT) assay and 2′,7′-dichlorofluorescein (H2DCF) staining. The ROS toxicity alters the larval gut structure as revealed by DAPI staining. The NP stress of larvae affects the Drosophila development by distressing pupa count and varying the phenotypic changes in sensory organs (eye, thorax bristle, wings). Besides phenotypic changes, flawed climbing behaviour against gravity was seen in ZrO2 NP-treated flies. All together, for the first time, we have reported that a ROS-mediated ZrO2 NP toxicity alters neuronal development and functioning using Drosophila as a model organism.
Carbon-coated ZnFe2O4 spheres with sizes of ~110–180 nm anchored on graphene nanosheets (ZF@C/G) are successfully prepared and applied as anode materials for lithium ion batteries (LIBs). The obtained ZF@C/G presents an initial discharge capacity of 1235 mAh g?1 and maintains a reversible capacity of 775 mAh g?1 after 150 cycles at a current density of 500 mA g?1. After being tested at 2 A g?1 for 700 cycles, the capacity still retains 617 mAh g?1. The enhanced electrochemical performances can be attributed to the synergetic role of graphene and uniform carbon coating (~3–6 nm), which can inhibit the volume expansion, prevent the pulverization/aggregation upon prolonged cycling, and facilitate the electron transfer between carbon-coated ZnFe2O4 spheres. The electrochemical results suggest that the synthesized ZF@C/G nanostructures are promising electrode materials for high-performance lithium ion batteries.
Water dispersible boron nanoparticles have great potential as materials for boron neutron capture therapy of cancer and magnetic resonance imaging, if they are prepared on a large scale with uniform size and shape and hydrophilic modifiable surface. We report the first method to prepare spherical, monodisperse, water dispersible boron core silica shell nanoparticles (B@SiO2 NPs) suitable for aforementioned biomedical applications. In this method, 40 nm elemental boron nanoparticles, easily prepared by mechanical milling and carrying 10-undecenoic acid surface ligands, are hydrosilylated using triethoxysilane, followed by base-catalyzed hydrolysis of tetraethoxysilane, which forms a 10-nm silica shell around the boron core. This simple two-step process converts irregularly shaped hydrophobic boron particles into the spherically shaped uniform nanoparticles. The B@SiO2 NPs are dispersible in water and the silica shell surface can be modified with primary amines that allow for the attachment of a fluorophore and, potentially, of targeting moieties.
Novel water-soluble anionic p-tert-butylthiacalix[4]arene with propanesulfonate fragments has been synthesized. Alkylation of the lower rim of thiacalix[4]arene in the presence of NaH/THF led to cone conformation instead of the expected 1,3-alternate conformer due to metal template effect. The presence of supramolecular associates at the critical micelle concentration of 1.65 · 10?5 M were investigated in aqueous solutions by a combination of different techniques (DLS and conductivity). It was observed that the macrocyclic platform decreases the CMC by tenfold as compared with non-macrocycle analogs. A simple approach for the design of stable monodisperse Ag-based nanoaggregates (near 95 nm) containing ionic Ag and organic ligand–thiacalix[4]arene sulfo derivative in water has been developed. Self-assembled fractal hybrid nanodendrites consisting of water-soluble anionic (thia)calix[4]arenes and Ag+ have been obtained in a single step under mild conditions.
For safety and environmental risk assessments of nanomaterials (NMs) and to provide essential toxicity data, nano-specific toxicities, or excess toxicities, of ZnO, CuO, and Ag nanoparticles (NPs) (20, 20, and 30 nm, respectively) to Escherichia coli and Saccharomyces cerevisiae in short-term (6 h) and long-term (48 h) bioassays were quantified based on a toxic ratio. ZnO NPs exhibited no nano-specific toxicities, reflecting similar toxicities as ZnO bulk particles (BPs) (as well as zinc salt). However, CuO and Ag NPs yielded distinctly nano-specific toxicities when compared with their BPs. According to their nano-specific toxicities, the capability of these NPs in eliciting hazardous effects on humans and the environment was as follows: CuO > Ag > ZnO NPs. Moreover, long-term bioassays were more sensitive to nano-specific toxicity than short-term bioassays. Overall, nano-specific toxicity is a meaningful measurement to evaluate the environmental risk of NPs. The log Teparticle value is a useful parameter for quantifying NP nano-specific toxicity and enabling comparisons of international toxicological data. Furthermore, this value could be used to determine the environmental risk of NPs.
In flame spray pyrolysis (FSP), the generation of uniform nanoparticles can be quite challenging due to difficulties in controlling droplet sizes during liquid spraying and uneven flame temperature. Here, we report a method to produce relatively uniform nanocrystals of a Tb3+ doped Y2O3 phosphor. In ethanol, metal nitrate precursors were simply mixed with organic surfactants to form a homogeneous solution which was then subjected to FSP. Depending on relative concentrations of the surfactant (oleic acid) to the metal precursors (yttrium and terbium nitrates), different sizes and morphologies of Y2O3:Tb3+ particles were obtained. By adjusting the surfactant concentration, Y2O3:Tb3+ crystals as small as 20~25 nm were acquired. X-ray diffraction and transmittance electron microscopy were used to prove that as-synthesized nanoparticles were highly crystalline due to the high temperature of FSP. X-ray photoelectron spectroscopy revealed that terbium dopants were well distributed throughout Y2O3 particles and a small portion of carbonate impurities were remained on the surface of particles, presumably originated from incomplete combustion of the organic surfactants. Photoluminescence (PL) spectra of Y2O3:Tb3+ nanocrystals exhibited a green light emission ensuring that the terbium doping was successfully occurred. However, when post-annealing was performed on the nanocrystals, their PL was dramatically enhanced indicating that quenching centers such as carbonate impurities and surface defects may have been removed by the annealing process. Owing to the continuous processability of FSP, this current method can be a practical way to produce nanoparticles in a large quantity. The obtained Y2O3:Tb3+ nanocrystals were used to fabricate a transparent film with poly-ethylene-co-vinyl acetate (poly-EVA) polymer, which was suitable for a spectral converting layer for a solar cell.
A novel nano-size MnxOy/clinoptilolite catalyst of high activity for propane-SCR reaction of NOx at low temperatures has been synthesized by a hydrothermal method in a temperature range of 80–180 °C. The optimum synthesis temperature resulting in maximum NOx conversion was 150 °C. An optimum manganese oxide loading of 0.2 wt.% results in the best catalytic behavior (71% NOx conversion). All catalysts exhibited an optimal propane-SCR reaction temperature of 200 °C. The optimum catalyst produces no detectable CO (GHSV 27,000 h) at 200 °C. Manganese in the optimum catalyst exists as Mn2+ (37.8%), Mn3+ (14.2%), and Mn4+ (48%).
Graphical abstract Flake-like manganese oxide nanostructures (indicated by an arrow in the TEM picture) next to the clinoptilolite zeolite sheet-like crystals result in a promising low-temperature propane-selective catalytic reduction of NOx.
Ternary composites of BiFeO3/graphene nanoplatelet (GNP)/epoxy composites were synthesized and its electromagnetic and microwave absorbing properties were studied; the main absorbing mechanism was illustrated. The phase, microstructure, and microwave absorbing properties were characterized by X-ray diffraction, scanning electron microscope, and vector network analyzer. The results indicated that the BiFeO3 was successfully synthesized and the GNP was uniformly distributed in the composites, and the complex permittivity of BiFeO3/GNP/epoxy composites increased with increasing the GNP content due to the interface polarization and conductance loss. The minimum reflection loss value was reached to ??45 dB at 9.25 GHz with the thickness of 1.4 mm when the GNP content was 2 wt%, and also the absorbing properties of (BiFeO3+GNP)/epoxy composites can be tailored by the GNP content and composite thickness, which may be used as a kind of absorbing materials with good absorbing performance and low density.
Graphical abstract The reflection loss curves and the simulated matching thickness of GNP-BiFeO3-epoxy composites with 2 wt% GNP content. As can be seen, the minimum reflection loss value was reached to ??45 dB at 9.25 GHz with the thickness of 1.4 mm, and also the quarter-wavelength matching theory can be used to illustrate the good absorbing properties of GNP-BiFeO3-epoxy composites.
Addition reaction between C60 and ethylenediamine occurred at room temperature in an ambient condition. C60-ethylenediamine adduct particles were prepared by mixing toluene solutions of C60 and ethyelenediamine. Average diameter of the C60-ethylenediamine adduct particles was changed non-linearly according to the reaction time, which were observed using transmission electron microscopy. Early stage of the reaction, the diameter of the adduct particles was changed from about 250 to about 430 nm. Then, the size of the adduct particles was converged to about 300 nm. During this addition reaction, the crystalline sizes of adduct particles were constant about 2–3 nm, regardless of the sizes of the adduct particles, which were determined by X-ray diffraction measurement.
Mo-doped V2O5 hierarchical nanorod/nanoparticle core/shell porous microspheres (MVHPMs) were prepared via a simple hydrothermal approach using ammonium metavanadate and ammonium molybdate as precursors followed by a thermal annealing process. The samples were characterized by XRD, SEM, TEM, EDS, and XPS carefully; it confirmed that porous microspheres with uniform Mo doping in the V2O5 matrix were obtained, and it contains an inner core self-assembled with 1D nanorods and outer shell consisting of nanoparticles. A plausible growth mechanism of Mo-doped V2O5 (Mo-V2O5) porous microspheres is suggested. The unique microstructure made the Mo-V2O5 hierarchical microspheres a good cathode material for Li-ion battery. The results indicate the synthesized Mo-V2O5 hierarchical microspheres exhibit well-improved electrochemical performance compared to the undoped samples. It delivers a high initial reversible capacity of 282 mAh g?1 at 0.2 C, 208 mAh g?1 at 2 C, and 111 mAh g?1 at 10 C, and it also exhibits good cycling stabilities; a capacity of 144 mAh g?1 is obtained after 200 cycles at 6 C with a capacity retention of >?82%, which is much high than that of pure V2O5 (95 mAh g?1 with a capacity retention of 72%).
Oxyfluoride glass-ceramic in the system SiO2–Al2O3–CaF2–SmF3 containing Sm3+-doped CaF2 nanocrystals in the range from 15 to 150 nm size were produced by using the controlled ceramization of the precursor glass. The incorporation of the Sm3+-dopant ion in the glass ceramic creates new electron-trapping centers and thermoluminescence (TL) method has been used in order to trace their evolution during glass ceramization. The 370 °C TL peak observed in precursor glass has been assigned to the recombination of the electrons released from the Sm2+-traps in the amorphous glass network. In the glass-ceramic sample containing nanocrystals with about 15 nm size the new weak TL peaks at 270, 290, and 310 °C were attributed to the recombination of the electrons released from the Sm2+-traps located mainly at the surface of the CaF2 nanocrystals. In the glass-ceramic sample containing nanocrystals with about 150 nm size, the new TL peaks at 232, 270, and 302 °C size have been assigned to the recombination of the electrons released from the Sm2+-traps located inside the CaF2 nanocrystals. 相似文献
A range of mono- and bimetallic AumCun nanoparticles (NPs), with varying metal compositions, was prepared by using a third-generation diaminobutane poly(propylene imine) (G3 DAB-PPI) dendrimer, modified with alkyl chains, as a stabilizer. It was found that the length of the peripheral alkyl chain, (M1 (C15), M2 (C11), and M3 (C5)), had a direct influence on the average nanoparticle size obtained, confirming the importance of the nanoparticle stabilizer during synthesis. The Au NPs showed the highest degree of agglomeration and polydispersity, whereas the Cu NPs were the smallest and most monodisperse of the NPs. The bimetallic NPs sizes were found to vary between those of the monometallic NPs, depending on the metal composition. Interestingly, the bimetallic NPs were found to be the most stable, showing very little variation in size over time, even up to 9 months. The DSNs were evaluated in the catalytic oxidation of styrene, using either H2O2 or TBHP as oxidant. Here, we show that the bimetallic DSNs are indeed the superior catalysts when compared to their monometallic analogues, under the same reaction conditions, since a good compromise between stability and activity can be achieved where the Au provides catalytic activity and the Cu serves as a stabilizer. These AumCun bimetallic DSNs present a less expensive and more stable catalyst with negligible loss of activity, opening the door to green catalysis.
Asymmetric capacitor based on TiO2 with the size range from 90 to 410 nm and mesoporous MnO2 (ca. 200–380 nm) electrodes has been successfully constructed and characterized in LiClO4 aqueous electrolyte. The samples of both metal oxides were fully characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), N2 adsorption-desorption, and so on. The electrochemical capacitive performances of both electrode materials were evaluated by cyclic voltammetry and galvanostatic charge-discharge in 1 mol/L LiClO4 with a working voltage of 2.0 V. The discharge profile of the asymmetric capacitor exhibited an excellent capacitive behavior and good cycling stability after 2000 cycles. Moreover, the TiO2//MnO2 asymmetric capacitor possesses both higher energy density and power density (7.7 Wh/kg, 762.5 W/kg) than that of Maxsorb//Maxsorb symmetrical capacitor (7.0 Wh/kg, 400.0 W/kg).
Graphical abstract A novel asymmetric capacitor based on TiO2 and mesoporous MnO2 electrodes has been successfully constructed and characterized in LiClO4 aqueous electrolyte.
