Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.
Porous polymeric monoliths were prepared via electron beam triggered free radical polymerization of (meth)acrylates. Post‐synthesis functionalization of these supports was accomplished via electron beam initiated free radical graft polymerization of methacryloyl‐substituted NHC precursors. The grafted precursors were converted into the corresponding copper complexes. Cu‐loadings were between 1.3 mg · g−1 and 1.5 mg · g−1. These supported catalysts were used in selected CO hydrosilylation and cyanosilylation reactions using a continuous flow setup.
Macroscopic pH‐responsive self‐assembly is successfully constructed by polyacrylamide(pAAm)‐based gels carrying dansyl (Dns) and β‐cyclodextrin (βCD) residues, which are represented as Dns‐gel and βCD‐gel, respectively. Dns‐gel and βCD‐gel assemble together at pH ≥ 4.0, but disassemble at pH ≤ 3.0. The adhesion strengths for pairs of Dns‐gel/βCD‐gel increase with increasing pH. The fluorescence study on the model system of pAAm modified with 1 mol% Dns moieties (pAAm/Dns) reveals that Dns residues are protonated at a lower pH, which results in the reduction in binding constant (K) for Dns residues and βCD.
Small, organic, toxic compounds are not well eliminated by water‐treatment systems and eventually become concentrated in the human body. In this study, liposomes are employed to house aptamers with their own binding buffer. When small, organic, toxic compounds in water pass through a liposome barrier, only the target molecules are captured by the DNA aptamers inside the liposomes. The capture efficiency is not high when DNA aptamers are used in tap water. When DNA aptamers in liposomes are used, the capture efficiency increases more than 80%. The simultaneous and selective elimination of target toxicants is successfully performed for tap‐water samples containing toxicant mixtures.
The B‐ala/AIBN PBZ system has a high extent of ring‐opening of oxazine because phenol‐containing oligomers are formed at the early stage of the curing process. As a result, the B‐ala/AIBN PBZ system possesses a relatively stronger intramolecular hydrogen bonding and lower surface energy than the pure B‐ala system at low temperature curing. In this context, poly(4‐vinyl pyridine), poly(4‐vinyl phenol) thin films and polycarbonate substrates, which lack liquid resistance, possess low surface free energy after modification with B‐ala/AIBN = 5/1 PBZ.
Summary: A rapid and eco‐friendly synthesis of poly(butylene succinate) (PBS) using microwaves was developed in the presence of 1,3‐dichloro‐1,1,3,3‐tetrabutyldistannoxane as catalyst. To determine the optimum conditions, the effect of catalyst concentration, bulk vs. solution polymerization, reaction time, temperature, and stoichiometry of the monomers were studied. Based on the optimum conditions, PBS with a weight‐average molecular weight of 2.35 × 104 was obtained in a short time of 20 min.
Synthesis of poly(butylene succinate) under microwave irradiation. 相似文献
Mn(salen)Cl was applied as a low‐cost catalyst for the formation of alkoxyamines from nitroxides and substituted styrenes. These “unimolecular initiators” for nitroxide‐mediated radical polymerization (NMRP) were synthesized using 2,2,6,6‐tetramethyl‐1‐piperidine‐1‐oxyl and 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐oxyl. Functionalized alkoxyamines were obtained from 4‐vinylbenzyl chloride and 4‐vinylbenzyl alcohol. The divinyl compound 1,2‐bis(4‐vinylphenyl)ethane was converted to an alkoxyamine monomer and to bisaminooxy compounds, which can be used as “biradical initiators” for NMRP.
Formation of alkoxyamines using Mn(salen)Cl as the catalyst. 相似文献
Summary: We propose and demonstrate the utility of an interfacial living/controlled (reversible addition fragmentation chain transfer, RAFT) radical miniemulsion polymerization in nano‐encapsulation. The principles and methodology behind this technique are readily scalable and highly efficient. The living/controlled nature of the system offers great opportunities to tune the properties of the polymer shell‐like thickness, surface functionality, molecular weight, and inner‐wall functionality by simply using a semi‐continuous polymerization technique.
Illustration of encapsulation principles by RAFT interfacial miniemulsion polymerization. 相似文献
A novel semi‐interpenetrating polymer network based on alginate and poly(N‐isopropylacrylamide) (PNiPAAm) has been synthesized that shows response to temperature and magnetic fields. Highly homogeneous porous hydrogels are obtained by copolymerizing N‐isopropylacrylamide and bis‐acrylamide in the presence of an aqueous alginate solution. The synthesis of magnetic iron oxides by in‐situ oxidation of iron cations coordinated to the alginate network results in a hydrogel with an enhanced deswelling rate with respect to pure PNiPAAm.
Poly(ethersulfone) membranes were surface modified in a one‐step procedure. For this purpose, the membranes were soaked with aqueous solutions of different low‐molecular weight molecules bearing diverse hydrophilic functionalities and subject to electron beam treatment. No catalysts, photoinitiators, organic solvents or other toxic reagents were used, and no additional synthetic or purification steps were required.
Water dispersible nanofibrilar polyaniline (NF‐PANI) provides a novel and direct route towards carbon nanotube water dispersions of high concentration. Carrying out the chemical synthesis of NF‐PANI in the presence of carbon nanotubes (CNTs) results in an entirely nanostructured nanofibrilar polyaniline/carbon nanotube (NF‐PANI/CNT) composite material that contains well segregated CNTs partially coated by NF‐PANI. This new approach is simple, fast, and inexpensive, and enables the direct preparation of stable and homogeneous dispersions of the composites in water at concentrations up to 10 mg · mL−1, even for the highest CNT loadings of 50 wt.‐% without the participation of surfactants or stabilizers.
This study reports a continuous prepartion of spherical or hemispherical polymer particles simply utilizing the phase separation in polymer blend films during the coating process. We took an advantage of the strong phase separation between a water‐soluble crystalline polymer as a matrix and hydrophobic polymers as minor components. We demonstrated the prepartion of water‐soluble polystyrene (PS) particles, nitrilotriacetic acid (NTA)‐functionalized PS particles for protein separation, and semiconducting poly(3‐hexylthiophene) (P3HT) particles. The sizes of the particles could be controlled by adjusting the film thickness and weight fraction of the minor component polymers in the blend film. It provides a simple facile way to prepare polymer particles in a continous process.
Intrinsically glucoside‐based microspheres are prepared in olive oil via a water in oil inverse suspension polymerization. The microspheres are characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) microscopy, and X‐ray photoelectron spectroscopy (XPS), evidencing the intrinsic glucose character of the spheres. A novel boronic acid fluorescent molecule was subsequently conjugated to the microspheres in an aqueous environment, exhibiting the spatial and uniform distribution of glucoside as well as the affinity of the microspheres to bind with boron, evidenced via fluorescence spectroscopy measurements.
Summary: A simple and inexpensive method for forming a low‐density polyethylene (LDPE) superhydrophobic surface by controlling the crystallization behavior of LDPE by adjusting the crystallization time and nucleation rate has been proposed. The resulting porous surface, with hierarchical micro‐ and nanostructures on the beautiful floral designs, has a water contact angle of 173.0° ± 2.5°.
A highly porous surface created by adding nonsolvent (cyclohexanone) followed by evaporation of the LDPE in a vacuum at 25 °C (left, inset shows corresponding water contact angle). Nanostructures on the florallike crystal structures (right). 相似文献
A supramolecular complex between an ionic monomer 3‐sulfopropyl methacrylate (SPMAK) and crown ether 18‐crown‐6 (18C6) has been employed to prepare a strong anionic cylindrical polyelectrolyte brush poly(potassium 3‐sulfopropyl methacrylate) (PSPMAK) by atom transfer radical polymerization (ATRP) in polar solvent dimethyl sulfoxide (DMSO). This strategy solved the problem of the solubilities of the incompatible hydrophobic poly‐initiator and hydrophilic ionic monomer. The formation of the PSPMAK brush is well proven by 1H NMR, aqueous gel permeation chromatography (GPC), dynamic light scattering (DLS), static light scattering (SLS), atomic force microscopy (AFM), and cryogenic transmission electron microscopy (cryo‐TEM) measurements. Cleavage of the side chains and further analysis reveal that the initiating efficiency of the polymerization is as low as 0.35.
Summary: A series of 7 homogeneous ethylene‐propylene copolymers is modeled by a Bernoullian, a terminal, a penultimate and a third order Markov model and it is found that the penultimate model describes this series best. The Bernoullian and terminal model prove to be insufficient and the third order Markov model is statistically not justified. Based on these results, a criterion to select the optimal Markovian order of homogeneous, single site catalyst produced copolymers is developed.
Schematic of the [(3‐MePh)(4‐MePh)C(2,7‐di‐tert‐BuFlu)(Cp)]ZrCl2 metallocene copolymerizing ethene and propene. 相似文献
Summary: Novel biodegradable copolymers derived from succinate, butan‐1,4‐diol, and butan‐1,4‐diamine were synthesized by two‐step polycondensation reactions. The obtained copolymers had a periodical‐sequence structure consisting of ester and amide units, and the melting temperatures of the periodic copolymers increased with an increase in amide content. The crystalline structure of the periodic copolymers differs from that of butylene succinate homopolymer (PBS), and these results suggest that the periodically introduced amide units are included in the crystalline phase forming a novel crystalline structure.
Periodic copolyester‐amides derived from succinate, butane‐1,4‐diol, and butan‐1,4‐diamine 相似文献
Summary: A feasible method for the preparation of antimicrobial ultrafine fibers with silver nanoparticles was developed by direct electrospinning of a cellulose acetate (CA) solution with small amounts of silver nitrate followed by photoreduction. Silver nanoparticles in ultrafine CA fibers were stabilized by interactions with carbonyl oxygen atoms in CA. Ultrafine CA fibers with silver nanoparticles showed very strong antimicrobial activity.
TEM image of an ultrafine CA fiber electrospun from 10 wt.‐% CA solution with 0.5 wt.‐% AgNO3. 相似文献
