Summary: We propose a new approach for predicting polymer properties from structured molecular representations based on recursive neural networks. To this aim, a structured representation is designed for the modeling of polymer structures. This representation can also account for average macromolecule characteristics. Preliminarily, this model is applied to the calculation of the Tg of (meth)acrylic polymers with different stereoregularity.
Representation of poly(methyl methacrylate) as a chemical tree and unfolding of the encoding process through its structure. 相似文献
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.
SS phages are genetically enginnered by replacing 2 N‐terminal amino acids of the p8 coat protein of the fd phage. AGE and zeta potential measurements show that SS phages carry at least 1/4 less net negative surface charge than fd phages. Morphology and thickness of phages are studied at different counterion concentrations (10?3, 10?2 and 10?1 M ) by AFM, SEM and immunofluorescence analyses. Bundles induced by CoCl2 and CaCl2 are either metallized by chemical reduction or biomineralized for apatite‐like material formation. EDX spectroscopy confirms the presence of Co, P and Ca peaks in mineralized samples. Such bottom‐up manufactured phage scaffolds might be applied in bioengineering studies.
Summary: The polylactide‐based nano‐composites were prepared via melt extrusion method using different types of intercalants and nano‐fillers having different surface charge density. In order to understand the direct polymer melt intercalation into the nano‐galleries, the interdigitated layer structure of the organically modified layered filler (OMLF), where the intercalants are oriented with some inclination to the host layer in the interlayer space, was proposed. After polymer melt intercalation, the smaller initial interlayer opening led to the larger interlayer expansion, suggesting the large amount of the intercalation of the polymer chains. Consequently, the nano‐composite exhibited finer dispersion of the nano‐fillers when compared with the nano‐composites prepared from OMLFs with larger initial interlayer opening.
Illustration of a model of interlayer structure of the qC14(OH) in gallery space of HTO. 相似文献
Poly(vinyl phosphonic acid) (PVPA) as obtained by free radical polymerization of aqueous vinyl phosphonic acid was studied by light scattering (SLS, DLS) and size exclusion chromatography (SEC) in dilute aqueous solutions containing sufficient salt in order to screen long range electrostatic interactions. Samples of 37< < 110 × 103 were studied. The polymers showed positive A2‐values in aqueous NaH2PO4 solution (0.04 M ), and self‐diffusion behavior and RH/RG—ratios indicative of the structure of random coiled chains. A comparison of the SEC‐elugrams of the PVPA‐samples with those of commercially available standards of poly(acrylic acid) sodium salt gave a fit to the same calibration curve described by log Pn(PVPA) = −0.21νe + 7.0(+0.1) which correlates the number average degree of polymerization (Pn) with the elution volume νe. This indicates that PVPA and PAA have the same hydrodynamic structure under given solution conditions.
Polyaniline nanodisks have been synthesized successfully by the chemical oxidation polymerization of aniline by a self‐assembly process without the use of any acid. The thickness and lateral dimensions of the polyaniline nanodisks are in the range of 20–30 nm and 1–2 µm, respectively. The influence of synthetic parameters, such as the concentration of ammonium peroxydisulfate and pH, on the morphologies of polyaniline nanostructures have been investigated.
The IUPAC recommended factor 2 preceding rate coefficients in the radical termination kinetic equations is claimed to be incorrect and confusing. This recommendation can lead to incorrect analysis of experimental data, especially while applying kinetic Monte Carlo simulations. The statement is based on the derivation of the corresponding relationships.
Summary: The cyclopolymerization of 4,4‐bis(hydroxymethyl)‐1,6‐heptadiyne ( M1 ), 4‐(carboxyethyl)‐1,6‐heptadiyne ( M2 ), 4‐(hydroxymethyl)‐1,6‐heptadiyne ( M3 ), and 4‐carboxy‐1,6‐heptadiyne ( M4 ) using five different well‐defined metathesis initiators was investigated. Control of molar mass was achieved with catalysts bearing trifluoroacetate ligands. 13C NMR experiments showed that poly‐ M2 , prepared by the action of any catalyst consisted solely of five‐membered ring structures, i.e., 1,2‐(cyclopent‐1‐enylene)vinylene units. Effective conjugation lengths of all polymers were calculated from the corresponding UV‐Vis absorption maxima, which varied reversibly with temperature.
A precise control of metallic‐nanoparticle assembly is highly critical for the realization of tangible, high‐performance devices or materials. Until recently, nanoparticle assembly using 1D templates had been limited to a narrow spectrum of nanoparticles as it was mostly dependent on the surface chemistry of the nanoparticles used. Inspired by the universal adhesive properties of mussels, we demonstrate a universal polymeric template for 1D assembly of various nanoparticles including, gold nanoparticles, iron oxide nanoparticles, and quantum dots. We find that the length of the 1D assembly is tunable using hyaluronic acid‐graft‐catechol templates with various contour lengths.
Regioregular poly(3‐hexylthiophene) has been successfully incorporated into a novel amphiphilic block copolymer. The amphiphilic nature of poly(3‐hexylthiophene)‐block‐poly(acrylic acid) has been investigated using spectroscopic methods and has yielded solvatochromic behavior in several solvents of varying polarity. Evidence suggests that a supramolecular, long range ordering of block copolymer occurs in polar solvents, resulting in the formation of aggregates. Despite relatively large amounts of non‐conductive blocks, the poly(3‐hexylthiophene) diblock copolymer yields a high conductivity of 1 S · cm−1, and atomic force microscopy shows the formation of a highly organized nanofibrilar morphology in the solid state.
Summary: Epoxy nanocomposites containing rod‐like silicate (attapulgite) were prepared using a simple organic modification to the nanorods. The modification led to effective interfacial adhesion between the ceramic nanorods and the epoxy resin and hence good load transfer. Scanning electron microscopy examination revealed a uniform dispersion of nanorods in the epoxy resin. Compared to the neat resin, nanocomposites with 7.47 vol.‐% nanorods exhibited an increase in the (rubbery state) storage modulus of 122.5%. In addition, the nanocomposites exhibited improved dimensional stability both above and below the Tg.
Storage modulus of the neat resin and nanocomposites. 相似文献
Summary: Evidence of clay migration from the core to the surface of poly(propylene)/montmorillonite nanocomposites is provided. A three‐ to fivefold increase in the clay concentration of the surface is obtained during isothermal heating in oxidative atmosphere. The mechanism of migration is investigated by means of attenuated total reflectance Fourier transform infrared spectrometry. It is shown that oxygen plays a fundamental role in the migration mechanism.
Suitably activated, (Cp*){N(tBu)C(Me)N(Et)}ZrMe2 is known to initiate the ‘living’ and isotactic‐selective polymerization of alk‐1‐enes, and it can be used to synthesize block copolymers and stereoblock polymers. We report a full molecular kinetic investigation of propene, but‐1‐ene, and hex‐1‐ene polymerization with a MAO‐activated catalyst system. By combining NMR microstructural polymer analysis with QM modeling of the active species, the complicated regio‐ and stereochemistry of the polyinsertion process, as well as the active chain‐transfer pathways, are investigated. The perspectives and limitations of this catalyst for application in (stereo)block polymerizations are discussed.
A cationic water‐soluble polyfluorene (P2) containing a high density of tetraalkylammonium side chains in polymer backbone was synthesized and characterized. The polymer shows excellent water solubility up to 100 mg · mL−1 as well as high photoluminescence (PL) quantum yield of 44% in water. The relatively high cationic density and appropriate side chain length of the polymer are the key factors to achieve such high water solubility. The reduction potential of P2 is decreased as compared with its neutral polymer, reflecting the enhanced electron injection abilities. The standard NPB/Alq3 device using such a polymer as the electron injection layer shows nearly three‐fold enhancement in the electroluminescence (EL) efficiency.
