Photomechanical Switching Behavior of Semi‐Interpenetrating Polymer Network Consisting of Azobenzene‐Carrying Crosslinked Poly(vinyl ether) and Polycarbonate

Summary: A novel semi‐interpenetrating polymer network (semi‐IPN) with photomechanical switching ability was developed by a cationic copolymerization of azobenzene‐containing vinyl ethers in a matrix of a linear polycarbonate (PC). The semi‐IPN film showed reversible deformation upon switching the UV irradiation on and off and responded with unprecedented rapidity. The photomechanical effect is attributed to a reversible change between the highly aggregated and dissociated states of the azobenzene groups.

The reversible UV response of the length of the semi‐IPN film at 25 °C.     

Reactivity Study of Elementary Steps in the Polymerization Mechanism of Acrylfuranic Compounds by Frontier Molecular Orbital Theory

A reactivity study of the most important elementary steps (propagation, intermolecular degradative transfer, and re‐initiation) in free‐radical polymerization of acrylfuranic systems, furfuryl acrylate (FA), and furfuryl methacrylate (FM), using the frontier molecular orbital theory is described. A qualitative explanation of reactivity trends of these steps for both systems is given based on absolute values of the SOMO/HOMO gap. The small difference between values of k_p for FA and FM compared to that found for MA and MMA ( ) is justified semi‐quantitatively by applying a formulation for the change of energy in the transition state using second‐order perturbation theory.

     

Aminosilane SAM‐Assisted Patterning of Poly(3,4‐ethylenedioxythiophene) Nanofilm Robustly Adhered to SiO2 Substrate

To improve the patternability and adhesion of poly(3,4‐ethylenedioxythiophene) (PEDOT) nanofilm to an SiO₂ surface, an oxidized silicon wafer substrate was microcontact printed with an octadecyltrichlorosilane (OTS) monolayer, and subsequently its negative pattern was self‐assembled with (3‐aminopropyl)trimethoxysilane (APS) molecules. Then, a PEDOT nanofilm was selectively grown on the APS monolayer‐patterned area via the vapor phase polymerization (VPP) method. To evaluate the adhesion and patterning, the PEDOT nanofilm and mixed monolayer were investigated with a Scotch® tape peel test, Fourier transform infrared (FT‐IR) microspectrometer, X‐ray photoelectron spectrometer, and optical and atomic force microscopes. The evaluation revealed that the newly developed bottom‐up process can offer a robustly adhered, and selectively patterned PEDOT nanofilm on an oxidized Si wafer surface, most likely through extensive but intermittent chemical bonds between the polymer and the APS monolayer.

     

Novel Shape‐Memory Polymer Based on Hydrogen Bonding

Summary: Due to a large difference in storage modulus below and above the glass transition temperature, a novel shape‐memory poly[(methyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)]/poly(ethylene glycol) semi‐interpenetrating polymer networks structure was synthesized, which is stabilized by hydrogen‐bonding interactions. The recovery ratio of these polymers could reach 99%. In such a system the maximum molecular weight of PEG required for the semi‐IPNs formation reaches 1 000.

Transition from the temporary shape (chem) to the permanent shape (four rods) for a shape‐memory P(MMA‐co‐VP)/PEG1000 semi‐IPNs.     

Discriminating Among Co‐monomer Sequence Distributions in Random Copolymers Using Interaction Chromatography

Interaction chromatography has been employed to validate that adsorption of poly[styrene‐co‐(4‐bromostyrene)] (PBr_xS) random copolymers, where x denotes the mole fraction of 4‐bromostyrene (4–BrS) in PBr_xS in solution depends on the average number of adsorptive segments, the type of adsorbing substrate, and on the co‐monomer sequence distribution in PBr_xS.

     

Defined Poly[styrene‐block‐(ferrocenylmethyl methacrylate)] Diblock Copolymers via Living Anionic Polymerization

Ferrocenylmethyl methacrylate (FMMA) is one of the very few metallocene‐based monomers that are promising candidates for truly living anionic polymerization. Nevertheless, FMMA homopolymers with a narrow polydispersity, or block copolymerization studies that result in satisfying blocking efficiencies, are unknown so far. Here we describe a procedure that leads to highly regular FMMA‐based polymers for the first time, characterized by polydispersity indices (PDI) of less that 1.05 and very high blocking efficiencies (>95%) in sequential copolymerization with styrene. Some of the obtained poly[styrene‐block‐(ferrocenylmethyl methacrylate)]s show unusual microphase morphologies, presumably the consequence of high T_gs causing ‘frustrated’ non‐equilibrium states.

     

Microphase‐Separated Brushes on Square Platelets in PS‐b‐PEO Thin Films

In polystyrene‐block‐poly(ethylene oxide) thin films, microphase‐separated brushes on the square platelets can be obtained via fast solvent evaporation by controlling the tethering density (0.08 < σ < 0.11). The tethering density of the brushes is proportional to the thickness of the PEO crystal and increases with increasing initial solution heating temperature (T_i). When T_i < T_m, where T_m is the melting point of PEO, brushes with microphase‐separated structures are observed. The formation of microphase‐separated brushes depends on two factors: the strong incompatibility between PS and noncrystalline PEO chains (attached to the crystalline PEO) and the weak interaction between PS‐PS brushes.

     

Effect of Chain‐Length Dependence of Interaction Parameter on Spinodals for Polydisperse Polymer Blends

Summary: The chain‐length dependence of the Flory‐Huggins (FH) interaction parameter is introduced into the FH lattice theory for polydisperse polymer‐blend systems. The spinodals are calculated for the model polymer blends with different chain lengths and distributions. It is found that all the related variables, r_n, r_w, r_z, and chain‐length distribution, have effects on the spinodals for polydisperse polymer blends.

The spinodals at different chain lengths.     

Synthesis and Characterization of Long‐Chain‐Branched Polyolefins with Metallocene Catalysts: Copolymerization of Ethylene with Poly(ethylene‐co‐propylene) Macromonomer

Poly(ethylene‐co‐propylene) macromonomer (EPM) was synthesized in a high‐temperature continuous stirred tank reactor (CSTR) with [C₅Me₄(SiMe₂N^tBu)]TiMe₂ (CGC‐Ti) as the catalyst system. PE samples with EPM long chain branching (LCB) were produced by semi‐batch copolymerization of ethylene and EPM with CGC‐Ti. The LCB frequencies were up to 21.8 EPM side chains per PE backbone. The effects of temperature and ethylene pressure on the degree of EPM grafting and catalyst activity were examined.

Incorporation of EPM into a growing PE chain forming an LCB polymer.     

Nanometer‐Scaled Hollow Spherical Micelles with Hydrophilic Channels and the Controlled Release of Ibuprofen

PS‐b‐PAA spherical micelles with a liquid core and a PAA shell are prepared with the assistance of 1,2‐dichloroethane. During the process of adding a mixture of PNIPAM‐b‐P4VP and PEG‐b‐P4VP, multi‐layered micelles with a mixed corona that consists of both PNIPAM and PEG chains are constructed through the electrostatic interaction and hydrogen bonding between the PAA block and the P4VP block. When heating above the LCST, the PNIPAM chains collapse onto the PAA/P4VP complex layer while the PEG chains still stretch into the solution through the collapsed PNIPAM layer, which leads to the formation of hydrophilic channels around the PEG chains. The ibuprofen encapsulated in the hollow space can diffuse through the channels and its release rate can be controlled by changing the ratio of PEG chains to PNIPAM chains in the corona.

     

Water Soluble Star‐block Copolypeptides: Towards Biodegradable Nanocarriers for Versatile and Simultaneous Encapsulation

The synthesis of water soluble star‐block copolypeptides and their encapsulation properties are described. The star‐block copolypeptides, obtained by ring‐opening polymerization of amino acid N‐carboxyanhydrides, consist of a PEI core, a hydrophobic polyphenylalanine or polyleucine inner shell, and a negatively charged polyglutamate outer shell. The encapsulation study showed that these water soluble, amphiphilic star‐block copolypeptides could simultaneously encapsulate versatile compounds ranging from hydrophobic to anionic and cationic hydrophilic guest molecules.

     

Direct Synthesis of Pyridyl Disulfide‐Terminated Polymers by RAFT Polymerization

A trithiocarbonate RAFT agent was modified with a pyridyl disulfide group and used in the direct synthesis of endgroup pyridyl disulfide‐functionalized homo‐ and amphiphilic block copolymers of oligo(ethyleneglycol) acrylate (PEG‐A) and butyl acrylate (BA). Both the homo‐ and copolymerizations were found to be well controlled via the RAFT mechanism. The NMR analysis indicated that both the homopolymers of PEG‐A and the amphiphilic diblock copolymers of PEG‐A and BA possessed pyridyl disulfide terminal groups. A UV‐Vis absorption test revealed that the pyridyl disulfide endgroup of the polymer could be efficiently used to couple thiol‐bearing molecules to the polymer without the need for any post‐polymerization modification. This communication presents the first efficient direct synthesis of thiol‐reactive endgroup‐functionalized well‐defined polymers via the RAFT technique.

     

Hyperbranched PEG by Random Copolymerization of Ethylene Oxide and Glycidol

The synthesis of hyperbranched poly(ethylene glycol) (hbPEG) in one step was realized by random copolymerization of ethylene oxide and glycidol, leading to a biocompatible, amorphous material with multiple hydroxyl functionalities. A series of copolymers with moderate polydispersity ( < 1.8) was obtained with varying glycidol content (3–40 mol‐%) and molecular weights up to 49 800 g mol⁻¹. The randomly branched structure of the copolymers was confirmed by ¹H and ¹³C NMR spectroscopy and thermal analysis (differential scanning calorimetry). MTS assay demonstrated low cell toxicity of the hyperbranched PEG, comparable to the highly established linear PEG.

     

Fabrication of Au/Titania Composite Nanodot Arrays from Au‐Loaded Block Copolymer Micellar Films

Summary: A simple route to an ordered array of metal/semiconductor oxide composite nanodots is presented. Micellar monolayer films of polystyrene‐block‐poly(2‐vinyl pyridine) (PS‐b‐P2VP) loaded with HAuCl₄ in the P2VP nanodomains are used as templates. TiO₂ is generated selectively within the polar P2VP domains of PS‐b‐P2VP/HAuCl₄ films by chemical vapor deposition of TiCl₄. Subsequent removal of the organic matrix by oxygen plasma or UV light leads to an array of Au/TiO₂ composite nanoparticles on the substrate surface.

Schematic illustration of the process to fabricate an array of Au/titania composite nanodots.     

Preparation of Highly Transparent and Thermally Stable Films of α‐Cyclodextrin/Polymer Inclusion Complexes

Films of an α‐cyclodextrin/poly(ε‐caprolactone) inclusion complex have been successfully prepared and show high transparency and heat resistance in comparison to the pure polymer film. The physical properties, such as transparency, mechanical properties, and thermal stability, of the α‐CD‐PCL‐IC films are found to depend on the α‐cyclodextrin‐to‐polymer stoichiometry.

     

Ring‐Opening Polymerization of ε‐Caprolactone by Poly(ethylene glycol) by an Activated Monomer Mechanism

Summary: The polymerization of ε‐caprolactone (CL) in the presence of HCl · Et₂O by an activated monomer mechanism was performed to synthesize diblock or triblock copolymers composed of poly(ethylene glycol) (PEG) and poly(ε‐caprolactone) (PCL). The obtained PCLs had molecular weights close to the theoretical values calculated from the CL to PEG molar ratios and exibited monomodal GPC curves. We successfully prepared PEG and PCL block copolymers by a metal‐free method.

The non‐metal catalyzed living ring‐opening polymerisation of ε‐caprolactone by PEG.     

Crystallization of Poly(ε‐caprolactone)/Poly(vinyl chloride) Miscible Blends Under Strain: The Role of Molecular Weight

Summary: The effect of poly(ε‐caprolactone) (PCL) molecular weight on the orientation of crystalline PCL in miscible poly(ε‐caprolactone)/poly(vinyl chloride) (PCL/PVC) blends, melt crystallized under strain, has been studied by a combination of wide angle X‐ray diffraction (WAXD) and small angle X‐ray scattering (SAXS) studies. An unusual crystal orientation with the b‐axis parallel to the stretching direction was observed in miscible PCL/PVC blends with PCL of high molecular weight (>21 000). SAXS showed the presence of nanosize confined PCL in the PCL/PVC blends, which could be preserved at temperatures higher than the T_m of PCL but lower than the T_g of PVC. A mechanism based on the confinement of PCL crystal growth was proposed, which can explain the formation of b‐axis orientation in PCL/PVC blends crystallized under strain.

SAXS pattern of stretched PCL/PVC blend after annealing at 90 °C for 5 min.     

DMAP/Cr(III) Catalyst Ratio: The Decisive Factor for Poly(propylene carbonate) Formation in the Coupling of CO2 and Propylene Oxide

Highly efficient formation of poly(propylene carbonate) can be achieved in the coupling of CO₂ and propylene oxide assisted by 4‐(N,N‐dimethylamino)pyridine (DMAP) and catalyzed with salen chromium(III) chloride by using DMAP/Cr ratios of less than 2. Under these conditions a possible backbiting mechanism is suppressed, leading to only minor amounts of cyclic carbonate as a side product.

     

Thermo‐Responsive Hydrogels with Nanodomains: Rapid Shrinking of a Nanogel‐Crosslinking Hydrogel of Poly(N‐isopropyl acrylamide)

Rapidly shrinking poly(N‐isopropyl acrylamide) (PNIPAM) hydrogels are prepared by crosslinking with self‐assembled nanogels that consist of cholesteryl‐ and methacryloyl‐substituted pullulan (CHPMA). The CHPMA nanogel (R_h = 26.4 nm) was used as a crosslinker for a hydrophilic nanodomain. Transmission electron microscopy images of the nanogel‐crosslinked PNIPAM hydrogel reveal a well‐defined nanoporous structure. The nanogel‐crosslinked PNIPAM hydrogel shows rapid shrinking based on its structure. The shrinking half‐time was ≈2 min, which is about 3 400 times faster than that of a PNIPAM hydrogel crosslinked by methylene(bisacrylamide).