Photocatalytic Activity Improvement of g-C3N4 under Visible Light by Optimizing Preparation Conditions

Graphite-like C₃N₄ (g-C₃N₄) is ané cient visible-light-driven photocatalyst which is com-monly used in pollutant degradation. The photoreactivity of g-C₃N₄ depends on the prepa-ration conditions to a large extent. In this work, we linked the preparation conditions of g-C₃N₄ to its stability and photocatalytic activity through dye photodegradation experi-ments and sensitivity mathematical analyses. The sensitivity mathematical analyses show that the effect of calcination temperature is more significant than calcination time on the photoreactivity of g-C₃N₄. The photocatalytic activity of optimized g-C₃N₄ in rhodamine B (RhB) degradation under visible light was 100 times higher than that of non-optimized one. The enhanced performance can be attributed to the increased specific surface area of g-C₃N₄ and the increased migration velocity of photogenerated electron-hole pairs on the surface. This work deepens the understanding of the relation between preparation conditions and the charateristics of g-C₃N₄, and provides an extremely simple method for significantly improving the photoreactivity of g-C₃N₄.     

Highly Efficient Ag3PO4/g-C3N4 Z-Scheme Photocatalyst for Its Enhanced Photocatalytic Performance in Degradation of Rhodamine B and Phenol

Ag₃PO₄/g-C₃N₄ heterojunctions, with different g-C₃N₄ dosages, were synthesized using an in situ deposition method, and the photocatalytic performance of g-C₃N₄/Ag₃PO₄ heterojunctions was studied under simulated sunlight conditions. The results revealed that Ag₃PO₄/g-C₃N₄ exhibited excellent photocatalytic degradation activity for rhodamine B (Rh B) and phenol under the same light conditions. When the dosage of g-C₃N₄ was 30%, the degradation rate of Rh B at 9 min and phenol at 30 min was found to be 99.4% and 97.3%, respectively. After five cycles of the degradation experiment for Rh B, g-C₃N₄/Ag₃PO₄ still demonstrated stable photodegradation characteristics. The significant improvement in the photocatalytic activity and stability of g-C₃N₄/Ag₃PO₄ was attributed to the rapid charge separation between g-C₃N₄ and Ag₃PO₄ during the Z-scheme charge transfer and recombination process.     

分级孔结构g-C3N4光催化剂的制备及性能

以单分散SiO2为模板,通过简单的一步煅烧法制备具有分级孔结构的g-C3N4。与体相g-C3N4相比,分级孔结构的g-C3N4不仅可见光吸收性能和比表面积得到提高,而且更有利于光生电子-空穴的分离。此外,具有分级孔结构的g-C3N4具有明显增强的可见光驱动的光催化产氢活性,当SiO2和二氰二胺质量比为1∶1时,制备所得g-C3N4(C3N4-2)产氢速率几乎是体相g-C3N4的18倍。     

Synthesis g-C3N4 of high specific surface area by precursor pretreatment strategy with SBA-15 as a template and their photocatalytic activity toward degradation of rhodamine B

Using SBA-15 as a template, high surface area porous graphitic carbon nitrides (g-C₃N₄) were successfully synthesized by pretreating melamine using hydrochloric acid, and fully characterized by Fourier-Transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron micrographs (SEM), N₂ adsorption-desorption, ultraviolet-visible (UV-Vis) spectroscopy, photoluminescence (PL) spectrum. The results of these analyses indicated that the g-C₃N₄ synthesized from HCl-pretreated melamine with SBA-15 as a template has enhanced specific surface area and increased the separation rate of the photogenerated electrons and holes compared with bulk g-C₃N₄, but didn’t change the structure of bulk g-C₃N₄. The photocatalytic activity of samples was evaluated by the degradation of rhodamine B (RhB) under xenon lamp. The results indicated that the activity was improved significantly with the increase of specific surface area. The rate constant for CN-3（HCl pretreatment melamine precursor and SBA-15 as a template） was 13 times as high as g-C₃N₄. Furthermore, the CN-3 catalyst exhibited outstanding structural and catalytic stability.     

单分散g-C3N4量子点修饰一维棒状BiPO4微晶的合成及其对光催化活性增强机理

利用水热法合成了一维棒状BiPO₄微晶,在此基础上采用浸渍-被烧法进行g-C₃N₄量子点表面修饰获得新颖的g-C₃N₄/BiPO₄异质结。借助X射线衍射(XRD)、场发射扫描电镜(FE-SEM)、透射电镜(HRTEM)、能谱(EDS)、紫外-可见漫反射(UV-Vis-DRS)等测试手段对所得样品的相组成、形貌和谱学特征进行了表征。选择罗丹明B(RhB)和苯酚作为模型污染物研究了所得在可见光下的催化活性。结果表明,样品16%(w/w) g-C₃N₄/BiPO₄对RhB降解的速率常数分别是纯和的g-C₃N₄和BiPO₄的16倍和4.6倍。g-C₃N₄量子点与BiPO₄之间形成异质结,抑制了光生电子-空穴对的复合,从而提高了催化剂的活性。自由基捕获实验进一步表明,超氧负离子自由基(·O₂-)是催化降解RhB和苯酚的主要活性物种。     

单分散g-C3N4量子点修饰一维棒状BiPO4微晶的合成及其对光催化活性增强机理

利用水热法合成了一维棒状BiPO₄微晶,在此基础上采用浸渍-焙烧法进行g-C₃N₄量子点表面修饰获得新颖的g-C₃N₄/BiPO₄异质结。借助X射线衍射（XRD）、场发射扫描电镜（FE-SEM）、透射电镜（HRTEM）、能谱（EDS）、紫外-可见漫反射（UV-Vis-DRS）等测试手段对所得样品的相组成、形貌和谱学特征进行了表征。选择罗丹明B（RhB）和苯酚作为模型污染物研究了所得在可见光下的催化活性。结果表明,样品16%（w/w） g-C₃N₄/BiPO₄对RhB降解的速率常数分别是纯g-C₃N₄和BiPO₄的4.6倍和15倍。g-C₃N₄量子点与BiPO₄之间形成异质结,抑制了光生电子-空穴对的复合,从而提高了催化剂的活性。自由基捕获实验进一步表明,超氧负离子自由基（·O₂^-）是催化降解RhB和苯酚的主要活性物种。     

g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将BiOBr纳米片生长到g-C₃N₄表面,制得g-C₃N₄-BiOBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由BiOBr和g-C₃N₄两相组成,BiOBr纳米片在片状g-C₃N₄表面快速形核生长形成面-面复合结构。相比于纯相g-C₃N₄和BiOBr,g-C₃N₄-BiOBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 g-C₃N₄-BiOBr复合光催化剂光催化活性分别是纯相g-C₃N₄和BiOBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

Density functional theory study on sensing properties of g-C3N4 sheet to atmospheric gasses: Role of zigzag and armchair edges

The ability of the polymer-based graphitic carbon nitride (g-C₃N₄) as a gas sensor toward NO, NO₂, CO, CO₂, SO₂, SO₃, and O₂ gasses is assessed using density functional theory (DFT) calculations in terms of energetic and electronic transport characteristics. In particular, this study is aimed to explore the role of zigzag and armchair edges of the g-C₃N₄ sheet on sensing performances. The electronic properties of adsorption systems, such as Bader charge analysis, band gaps, work function, and density of states (DOS), are used to understand the interaction between the adsorbed gas molecules and the g-C₃N₄ sheet. Our calculated results indicate that SOx (SO₃ and SO₂) gasses have higher adsorption energies on the g-C₃N₄ sheet than other gasses. Furthermore, the transport properties, such as current–voltage (I-V) and resistance-voltage (R-V) curves along the zigzag and armchair directions are calculated using the non-equilibrium Green's function (NEGF) method to understand the performance of the g-C₃N₄ sheet as a prominent conductive/resistive sensor. The I-V/R-V results indicate that the zigzag g-C₃N₄ sheet has excellent sensing ability toward SOx gasses at low applied voltages. However, the presence of H₂O degrades the sensing performance of the armchair g-C₃N₄ sheet. Theoretical recovery time has also been calculated to evaluate the reusability of g-C₃N₄ sheet-based gas sensors. Our results reveal that the zigzag g-C₃N₄ sheet-based sensing device has a remarkably high sensitivity (>300%) and selectivity toward SOx gasses and has the potential to work in a complex environment.     

Novel visible-light-driven photocatalyst of NiO/Cd/g-C3N4 for enhanced degradation of methylene blue

Novel NiO/Cd/g-C₃N₄ photocatalysts were synthesized using a green and straightforward microwave-assisted method and characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET) method, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and ultraviolet–visible spectroscopy (UV–Vis). The ternary NiO/Cd/g-C₃N₄ nanocomposites were evaluated for the degradation of methylene blue (MB) at room temperature under the visible light irradiation. Experimental results revealed that the weight percent of cadmium had a remarkable effect on the photodegradation efficiency. The NiO/Cd/g-C₃N₄ (0.1%) sample exhibited superior activity in the degradation reaction. The activity of this nanocomposite was about 4.5 and 3.25 fold higher than those of the pure g-C₃N₄ and NiO/g-C₃N₄ samples in the degradation of MB, respectively. The enhanced photocatalytic activity was attributed to the low energy gap, increased absorption capacity of the visible light, and efficient suppression of the recombination of photogenerated electron-hole pairs. A detailed photocatalytic mechanism over the nanocomposite of NiO/Cd/g-C₃N₄ (0.1%) was proposed with superoxide radical anion O₂^– as the main reactive species. The stability of the nanocomposite was confirmed after four consecutive runs as well.     

Quaternary ammonium hydroxide-functionalized g-C3N4 catalyst for aerobic hydroxylation of arylboronic acids to phenols

A new and efficient metal-free approach toward the synthesis of phenols via an aerobic hydroxylation of arylboronic acids by using a novel quaternary ammonium hydroxide g-C₃N₄ catalyst has been described. The functionalized quaternary ammonium hydroxide (g-C₃N₄-OH) has been prepared from graphitic carbon nitride (g-C₃N₄) scaffold by converting the residual –NH₂ and –NH groups to quaternary methyl ammonium iodide by performing a methylation reaction with methyl iodide followed by ion-exchange with 0.1 N KOH or anion exchange resin Amberlyst A26 (OH- form) by post-synthetic modification. The resultant g-C₃N₄-OH was characterized by XRD, FTIR, field-emission scanning electron microscope (FESEM), high-resolution transmission electron microscope (HRTEM), N₂ adsorption/desorption isotherms, and acid–base titration. Tested as solid-base catalysts, the g-C₃N₄-OH showed excellent catalytic activity in the aerobic hydroxylation reaction by converting a variety of arylboronic acids to the corresponding phenols in high yields. More importantly, the g-C₃N₄-OH solid-base has been successfully reused four times with the minor loss of initial catalytic activity (10.5%).     

Hydrogen production and photocatalytic activity of g-C3N4/Co-MOF (ZIF-67) nanocomposite under visible light irradiation

Herein, cobalt (Co)-based metal–organic zeolitic imidazole frameworks (ZIF-67) coupled with g-C₃N₄ nanosheets synthesized via a simple microwave irradiation method. SEM, TEM and HR-TEM results showed that ZIF-67 were uniformly dispersed on g-C₃N₄ surfaces and had a rhombic dodecahedron shape. The photocatalytic properties of g-C₃N₄/ZIF-67 nanocomposite were evaluated by photocatalytic dye degradation of crystal violet (CV), 4-chlorophenol (4-CP) and photocatalytic hydrogen (H₂) production. In presence of visible light illumination, the photocatalytic dye results showed that 95% CV degradation and 53% 4-CP degradation within 80 min. The H₂ production of the g-C₃N₄/ZIF-67 composite was 2084 μmol g⁻¹, which is 3.84 folds greater than that of bare g-C₃N₄ (541 μmol g⁻¹).     

Fabrication of noble-metal-free NiS<Subscript>2</Subscript>/g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> hybrid photocatalysts with visible light-responsive photocatalytic activities

Nanocomposites of NiS₂ with graphitic carbon nitride (NiS₂/g-C₃N₄) have been successfully synthesized by means of a facile hydrothermal method. The photocatalytic activities of as-prepared samples were evaluated by monitoring the photodecomposition of rhodamine B under visible light irradiation. The experimental results indicated that visible light-driven NiS₂/g-C₃N₄ composites exhibited an enhanced photocatalytic activity compared to that of pure NiS₂, due to the fast generation, separation and transportation of the photogenerated carriers resulting from the addition of NiS₂ nanoparticles (NPs). Interestingly, different amounts of NiS₂ deposition can affect the photocatalytic activities of the NiS₂/g-C₃N₄ composites. A suitable loading amount of NiS₂ NPs presents the best photodegradation performance. The photocatalytic reaction mechanism for the improved photocatalytic performance of NiS₂/g-C₃N₄ catalyst was proposed which was supported by PL, PEC, EIS and active species trapping results. A promising strategy presented here provides a facile route towards the development of economical, noble metal-free composites as photocatalysts for the applications in environmental remediation.     

A Targeted Review of Current Progress,Challenges and Future Perspective of g-C3N4 based Hybrid Photocatalyst Toward Multidimensional Applications

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO₂ reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C₃N₄ is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C₃N₄ is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C₃N₄ with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C₃N₄ to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C₃N₄ were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO₂ reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C₃N₄ based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.     

Honeycomb-like g-C3N4/CeO2-x nanosheets obtained via one step hydrothermal-roasting for efficient and stable Cr(VI) photo-reduction

Graphitic carbon nitride (g-C₃N₄)-based materials are regarded as one of the most potential photocatalysts for utilizing solar energy. In this work, we reported a facile one step in-situ hydrothermal-roasting method for preparing honeycomb-like g-C₃N₄/CeO₂ nanosheets with abundant oxygen vacancies (g-C₃N₄/CeO_2-x). The hydrothermal-roasting and incomplete-sealed state can (i) generate an in-situ reducing atmosphere (CO, N₂, NH₃) to tune the concentration of oxygen vacancies in CeO₂; (ii) beneficial to prevent continuous growth of g-C₃N₄ and results in honeycomb-like g-C₃N₄/CeO_2-x hybrid nanosheets. What is more, the g-C₃N₄/CeO_2-x photocatalyst exhibited extended photoresponse range, increased specific surface area and obviously enhanced separation efficiency of photogenerated electron-hole pairs. As a proof-of-concept application, the optimized g-C₃N₄/CeO_2-x nanosheets could achieve 98% removal efficiency for Cr(VI) under visible light irradiation (λ ≥ 420 nm) within 2.5 h, which is significantly better than those of pure g-C₃N₄ and CeO₂. This work provides a new idea for more rationally designing and constructing g-C₃N₄-based catalysts for efficient extended photochemical application.     

Combination of Ag2CrO4 and AgI semiconductors with g-C3N4: Novel nanocomposites with substantially improved photocatalytic performance under visible light

Novel g-C₃N₄/Ag₂CrO₄/AgI nanocomposites with improved photocatalytic performance under visible light were synthesized by consecutive deposition of Ag₂CrO₄ and AgI semiconductors over g-C₃N₄ sheets by refluxing method. The synthesized g-C₃N₄/Ag₂CrO₄/AgI photocatalysts were fully characterized by XRD, EDX, SEM, TEM, UV–vis DRS, TGA, FT-IR, and PL instruments. Photocatalytic performance of g-C₃N₄/Ag₂CrO₄/AgI (30%) nanocomposite for degradation of RhB was 27.9, 4.0, and 3.1 folds greater than those of the g-C₃N₄, g-C₃N₄/Ag₂CrO₄ (20%), and g-C₃N₄/AgI (30%) photocatalysts, respectively. The substantially increased photocatalytic performance was related to efficient retardation of the charge carriers from recombination and more absorbing of visible light, due to the synergistic effects of Ag₂CrO₄ and AgI on g-C₃N₄. The photocatalytic performance of the ternary nanocomposite did not considerably change after several cycles, indicating that the ternary nanocomposite is stable and it could be reused in successive runs.     

Microwave-assisted synthesis of the Fe2O3/g-C3N4 nanocomposites with enhanced photocatalytic activity for degradation of methylene blue

The preparation and photocatalytic performance of the Fe₂O₃/g-C₃N₄ nanocomposites with different weight percentage of iron was investigated in this study. Samples were successfully synthesized using melamine and ferric nitrate as the precursors via the green and facile microwave-assisted method. The physicochemical and structural properties of the Fe₂O₃-doped g-C₃N₄ were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET) method, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and ultraviolet–visible spectroscopy (UV–Vis). The photocatalytic activity of the Fe₂O₃/g-C₃N₄ catalysts was evaluated by the degradation of methylene blue (MB) at room temperature under visible light irradiation. As expected, the as-synthesized samples exhibited considerable improvement in the photodegradation of MB. The Fe₂O₃/g-C₃N₄ (1.0 wt%) nanocomposite had superior photocatalytic activity, with almost 70% degradation efficiency within 90 min of irradiation. The enhanced performance was ascribed to the separation and migration of the photoinduced electron–hole pairs and taking part of the charge carriers in the chemical redox reactions at the surface of the photocatalyst. In this work, the effect of Fe weight percentage on the degradation potential was also studied, and the photocatalytic mechanism was proposed with the main reactive species •OH.     

Graphite Carbon Nitride and Its Composites for Medicine and Health Applications

With the progress of science and technology and the improvement of people‘s living standards, the performance of traditional materials can no longer fully meet the needs of social development. Graphitic phase carbon nitride (g-C₃N₄), as a new type of nanomaterial, has good properties. Its unique graphite like structure and stable thermodynamic characteristics have led an increasing number of researchers to explore its diverse functions and use this as a basis to develop related energy and products for applications in various fields. Among them, applications in the field of medicine health have become popular in recent years. Therefore, this review summarizes the synthesis methods of g-C₃N₄ and its composites, as well as their applications in food, medicine, environmental monitoring and disease treatment, in the hope of providing references and basis for further expanding the applications of g-C₃N₄ in large health areas.     

g-C3N4/Ag/TiO2复合材料的构筑及其光催化性能（英文）

以合成的g-C3N4纳米片和Ag/TiO2空心微球为原料,采用机械搅拌的方法构筑了g-C3N4/Ag/TiO2三元复合光催化剂。采用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、扫描电镜(SEM)、X射线光电子能谱(XPS)、紫外-可见光漫反射(UV-Vis DRS)和光致发光光谱(PL)对g-C3N4/Ag/TiO2进行了表征。研究表明,g-C3N4/Ag/TiO2是由Ag/TiO2微球和g-C3N4纳米片复合而成的。与TiO2相比,其可见光响应范围延长,光生载流子的分离速率加快。在室温下,用降解罗丹明B的反应考察了g-C3N4/Ag/TiO2的可见光催化活性。研究表明,光照180 min时,g-C3N4(0.5%)/Ag/TiO2显示了最高的光催化活性(91.9%),分别是TiO2和Ag/TiO2的7.5和1.8倍。光催化活性的提高与合理的异质结构建和Ag的导电性能有关。     

Photocatalytic Reduction of Cr (VI) over g-C3N4 Photocatalysts Synthesized by Different Precursors

Graphitic carbon nitride (g-C₃N₄) photocatalysts were synthesized via a one-step pyrolysis process using melamine, dicyandiamide, thiourea, and urea as precursors. The obtained g-C₃N₄ materials exhibited a significantly different performance for the photocatalytic reduction of Cr(VI) under white light irradiation, which is attributed to the altered structure and occupancies surface groups. The urea-derived g-C₃N₄ with nanosheet morphology, large specific surface area, and high occupancies of surface amine groups exhibited superior photocatalytic activity. The nanosheet morphology and large surface area facilitated the separation and transmission of charge, while the high occupancies of surface amine groups promoted the formation of hydrogen adsorption atomic centers which were beneficial to Cr(VI) reduction. Moreover, the possible reduction pathway of Cr(VI) to Cr(III) over the urea-derived g-C₃N₄ was proposed and the reduction process was mainly initiated by a direct reduction of photogenerated electrons.     

Pt/g-C_3N_4/KB纳米复合催化剂的制备及其甲醇氧化性能

采用溶液中等离子放电法制备出了Pt纳米颗粒,用热氧化刻蚀和水热法成功的对石墨相氮化碳(g-C_3N_4)进行处理进而均匀吸附在科琴黑(KB)表面,最终制备出了Pt/g-C_3N_4/KB纳米复合催化剂。通过XRD分析,扫描电镜,透射电镜和电化学工作站探究了催化剂的组成、结构、颗粒大小以及电化学性能。Pt/g-C_3N_4/KB纳米复合催化剂展现出了良好的甲醇电氧化性能,性能的提升可能是由于g-C_3N_4良好的化学稳定性,N元素的存在改变Pt外层电子结构从而提高催化活性,这些因素提高了Pt的催化效率。