Rational design,properties, and applications of biosurfactants: a short review of recent advances

Biosurfactants combine physicochemical properties with biological activities. Although biosurfactants are often expressed by microorganisms, an increasing amount is produced by chemical synthesis. As many exist in the form of homologous compounds, it is often difficult to purify biosurfactants. But this has not limited the efforts to develop their commercial applications. In this short review, we have featured the recent advances in three important types of biosurfactants, lipopeptides, nucleolipids, and glycolipids. We have focused on comparing some of the key properties and functionalities between modern synthetic versions and their corresponding natural counterparts. We end the review by outlining the needs for not only strengthening their basic structure–property relationships through further research but also developing better technologies, irrespective of direct chemical synthesis or biological synthesis of biosurfactants through constructions of genetically engineered strains, to help advance the commercial use of biosurfactants.     

Bioflotation: Bacteria-Mineral Interaction for Eco-friendly and Sustainable Mineral Processing

In the current study, the action of two bacteria capable of producing biosurfactants and oxidizing iron (Fe) and sulfur (S), namely Bacillus pumilus SKC-2 and Alicyclobacillus ferrooxydans SKC/SAA-2, was investigated with respect to their ability in possessing dual-function as either bio-collector or depressant for the development of sulfide bioflotation processes. Both bacterial strains were able to produce high amounts of biosurfactants interacted with pyrite that had an important role in their adhesion on the surface of pyrite as well as the change of pyrite surface properties. Over the course of the experiments, the pH of the solutions gradually decreased to ∼3, indicating the active oxidation of pyrite minerals by bacteria. The growth of both bacterial strains resulted in the generation of biosurfactants as represented by the decrease of the surface tension of the solutions and the increase of the contact angle of the pyrite surfaces as a function of time. However, the contact angle of pyrite surfaces gradually decreased after 5 days of incubation until the experiments terminated on 30 days. Scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM-EDS) and Fourier transform Infrared (FTIR) analyses also confirmed the role of both bacterial strains in changing the pyrite surface properties to be more hydrophobic or more hydrophilic depending on the time of incubation. These results indicate that the changes of pyrite surface properties are clearly as the results of bacterial action, likely serving as both bio-collector or bio-frother and depressant that would be very applicable for flotation processes. These results increase our knowledge on the interactions in pyrite-bacteria complexes and could potentially be a very useful result with real exploitable value for those working on sulfide bioflotation processes.     

生物表面活性剂的特性及应用

生物表面活性剂可分为五类:糖脂、多糖脂、脂肽、磷脂及中性脂。木文简述了生物表面活性剂的特性,着重介绍了糖脂化合物的结构,物理化学性质及应用。     

Current perspective of sustainable surfactants based on renewable building blocks

Surfactants are active or essential ingredient of several industrial and consumer formulations. These amphiphilic organic molecules demonstrate unique ability to adsorb at the interface and self-aggregate or self-assemble into different phases in aqueous or nonaqueous solution. In recent years, environmental concerns coupled with increased consumer awareness have guided substantial growth of environmentally benign surfactant molecules often termed as ‘green surfactants’, oleochemical-based surfactants', ‘renewable surfactants’ ‘biosurfactants’, ‘natural surfactants’, and so on. These groups of new generation of eco-friendly surfactant molecules often directly or indirectly derived/developed from renewable building blocks can be broadly termed as ‘sustainable surfactants’ which are increasingly becoming popular in many application areas. The ever-increasing demand of surfactants in several application areas necessitates development of many new structural analogs of these molecules by sustainable approach. This review summarizes recent progress in the area of sustainable surfactants, their potential impact, and future perspective.     

Comparative study of biosurfactant produced by microorganisms isolated from formation water of petroleum reservoir

Biosurfactant produced by Pseudomonas aeruginosa, Bacillus subtilis and Rhodococcus erythropolis that isolated from the formation water of Chinese petroleum reservoir has been compared in surface abilities and oil recovery. Maximum biosurfactant production reached to about 2.66 g/l and the surface tension of liquid decreased from 71.2 to 22.56 mN/m using P. aeruginosa. Three strains exhibited a good ability to emulsify the crude oil, and biosurfactant of P. aeruginosa attained an emulsion index of 80% for crude oil which was greater than other strains. Stability studies were carried out under the extreme environmental conditions, such as high temperature, pH, salinity and metal ions. Results showed an excellent resistance of all biosurfactants to retain their surface-active properties at extreme conditions. It was found that the biosurfactants from three isolated bacteria showed a good stability above pH of 5, but at lower pH (from 1 to 5) they will harmfully be affected. They were able to support the condition up to 20 g/l salinity. P. aeruginosa biosurfactant was even stable at the higher salinity. Regarding temperature, all produced biosurfactants demonstrated a good stability in the temperature up to 120 °C. But stability of three biosurfactants was affected by monovalent and trivalent ions. Oil recovery experiments in physical simulation showed 7.2-14.3% recovery of residual oil after water flooding when the biosurfactant of three strains was added. These results suggest that biosurfactants of these indigenous isolated strains are appropriate candidates for enhanced oil recovery with a preference to biosurfactant of P. aeruginosa.     

Adsorption on stainless steel surfaces of biosurfactants produced by gram-negative and gram-positive bacteria: Consequence on the bioadhesive behavior of Listeria monocytogenes

The ability of adsorbed biosurfactants (Pf and Lb) obtained from gram-negative bacterium (Pseudomonas fluorescens) or gram-positive bacterium (Lactobacillus helveticus) to inhibit adhesion of four listerial strains to stainless steel was investigated. These metallic surfaces were characterized using the following complementary analytical techniques: contact-angle measurements (CAM), atomic force microscopy (AFM), polarization modulation-infrared reflection-adsorption spectroscopy (PM-IRRAS) and X-ray photoelectron spectroscopy (XPS). Contact-angles with polar liquids (water and formamide) indicated that the stainless steel surface covered with adsorbed biosurfactant was more hydrophilic and electron-donating than bare stainless steel. The surface characterization by XPS and PM-IRRAS revealed that conditioning the stainless steel changes the substrate in two ways, by modifying the surface alloy composition and by leaving an thin adsorbed organic layer. AFM observations enabled to say that the layer covered entirely the surface and was probably thicker (with patches) in the case of Pf-conditioned surfaces compared to the Lb-conditioned ones, which seemed to be less homogeneous. Though the added layer was thin, significant chemical changes were observed that can account for drastic modifications in the surface adhesive properties. As a matter of fact, adhesion tests showed that both used biosurfactants were effective by decreasing strongly the level of contamination of stainless steel surfaces by the four strains of Listeria monocytogenes. The more important decrease concerned the CIP104794 and CIP103573 strains (>99.7%) on surface conditioned by L. helveticus biosurfactant. A less reduced phenomenon (75.2%) for the CIP103574 strain on stainless steel with absorbed biosurfactant from P. fluorescens was observed. Whatever the strain of L. monocytogenes and the biosurfactant used, this antiadhesive biologic coating reduced both total adhering flora and viable and cultivable adherent bacteria on stainless steel surfaces. This study confirms that biosurfactants constitute an effective strategy to prevent microbial colonization of metallic surfaces by pathogenic bacteria like the food-borne pathogen L. monocytogenes.     

Biomimetic amphiphiles: Biosurfactants

Several types of natural and biomimetic surfactants have recently been reported. These biosurfactants bear the same common structural features as conventional surfactants, but the presence of bioactive functionalities incorporates new features such as structural complementarity and biological specificity into the common character of self-assembly driven by amphiphilicity. This review provides an outline of trend in recent biosurfactant research. Whilst these biosurfactants are attractive to many potential applications, further characterisation of their physiochemical properties will benefit the design and fabrication of functional biomaterials and accelerate our advances in nanobiotechnology.     

Hexagonal boron nitride quantum dots: Properties,preparation and applications

As a new type of quantum dots (QDs), hexagonal boron nitride quantum dots (BNQDs) exhibit promising potential in the applications of disease diagnosis, fluorescence imaging, biosensing, metal ion detection, and so on, because of their remarkable chemical stability, excellent biocompatibility, low cytotoxicity, and outstanding photoluminescence properties. However, the large-scale fabrication of homogeneous BNQDs still remains challenging. In this article, the properties and common fabrication methods of BNQDs are summarized based on the recent research progress. Then, the corresponding yields, morphologies, and fabrication mechanisms of these as-obtained BNQDs are discussed in detail. Moreover, the applications of these as-obtained BNQDs in different fields are also discussed. This article is expected to inspire new methods and improvements to achieve large-scale fabrication of homogeneous BNQDs, which will enable their practical applications in future.     

Long-wavelength (red to near-infrared) emissive carbon dots: Key factors for synthesis,fluorescence mechanism,and applications in biosensing and cancer theranostics

Carbon dots (CDs), as a new member of carbon nanostructures, have been widely applied in extensive fields due to their exceptional physicochemical properties. While, the emissions of most reported CDs are located in the blue to green range under the excitation of ultraviolet or blue light, which severely limits their practical applications, especially in photovoltaic and biological fields. Studies that focused on synthesizing CDs with long-wavelength (red to near-infrared) emission/excitation features (simply named L-w CDs) and exploring their potential applications have been frequently reported in recent years. In this review, we analyzed the key influence factors for the synthesis of CDs with long wavelength and multicolor (containing long wavelength) emissive properties, discussed possible fluorescence mechanism, and summarized their applications in sensing and cancer theranostics. Finally, the existing challenges and potential opportunities of L-w CDs are presented.     

Recent developments of polysaccharide-based double-network hydrogels

Polysaccharides possessing distinctive properties, such as biocompatibility, biodegradability, and nontoxicity, are promising matrices for hydrogels. However, the polysaccharides-based hydrogels have poor mechanical properties, which is a major limitation for their applications. In recent years, researches on double-network (DN) hydrogels with outstanding mechanical properties have gained increasing attention. Therefore, the main research orientation is to combine the benefits of both materials and broaden their applications in various fields. This paper reviews the recent progress of polysaccharide-based DN (PDN) hydrogels that show great advantages in mechanical, physiochemical properties, biocompatibility, biodegradability and so on. The preparation, structure, and unique properties of different PDN hydrogels are discussed in detail. Moreover, we summarize the applications of PDN hydrogels in biomedical and energy storage and conversion fields. This research progress is breaking through the limitations of PDN hydrogels and opening a new avenue for their future development.     

Self-assembling properties of glycolipid biosurfactants and their potential applications

Biosurfactants (BS) produced by a variety of microorganisms show unique properties (e.g. mild production conditions, multi-functionality, higher environmental compatibility) compared to their chemical counterparts. The numerous advantages of BS have prompted applications not only in the food, cosmetic, and pharmaceutical industries but in environmental protection and energy-saving technology as well. Among BS, “Glycolipid type” BS are the most promising, due to high productivity from renewable resources and versatile interfacial and biochemical properties. Mannosylerythritol lipids (MELs), which are glycolipid BS produced by yeast strains of the genus Pseudozyma, not only exhibit excellent surface activities but also self-assemble to form different lyotropic liquid crystalline phases such as sponge (L₃), bicontinuous cubic (V₂) or lammellar (L_α). They also show induction of cell-differentiation against human leukemia cells, and high binding affinity towards lectins and immunoglobulins. Recently, the cationic liposome bearing MELs has been demonstrated to increase dramatically the efficiency of gene transfection into mammalian cells. These features of BS should broaden the applications in new advanced technologies. The current status of R&D on glycolipid BS, especially their functions and potential applications, is discussed.     

Applications of Inorganic Polymeric Materials II: Polysilanes

Polysilanes which cover one of the most attractive and challenging fields, are high molecular weight polymers with inorganic elements in their backbone. These materials have silicon atoms in their main chain and exhibit unique properties resulting from the easy delocalization of sigma electrons in the Si─Si bonds. There are many technical uses as well as applications of these materials such as precursors of silicon carbide ceramics; a strengthening agent in porous ceramic; imaging materials in microlithography; photoiniting in radical reactions; and photoconducting, conducting, and semiconducting which are due to the unusual mobility of sigma electrons. In this work, the main structural features, properties, and some other important and recent applications of polysilanes are discussed.     

Biological amphiphiles (microbial biosurfactants)

Low- and high-molecular-weight biosurfactants are of great interest because of their physicochemical and biological properties, which can be exploited in oil, food, cosmetic and pharmaceutical industries. As for the general types of microbial amphiphiles, the data accumulated over recent years are adding new interesting molecular structures to well-known compounds. Using new strains and cultivation conditions, positive results were found in basic studies of lowering the surface tension of water (72 mN/m→27 mN/m, cmc: 150 mg/l; rhamnose lipids from Pseudomonas aeruginosa), of size determinations of micelles and vesicles (iturin A, a lipopeptide from Bacillus subtilis), of emulsifying properties, biological activities, as well as of application tests in soil remediation.     

Enzymatic glycosylation of small molecules: challenging substrates require tailored catalysts

Glycosylation can significantly improve the physicochemical and biological properties of small molecules like vitamins, antibiotics, flavors, and fragrances. The chemical synthesis of glycosides is, however, far from trivial and involves multistep routes that generate lots of waste. In this review, biocatalytic alternatives are presented that offer both stricter specificities and higher yields. The advantages and disadvantages of different enzyme classes are discussed and illustrated with a number of recent examples. Progress in the field of enzyme engineering and screening are expected to result in new applications of biocatalytic glycosylation reactions in various industrial sectors.     

TiO2 mesocrystals: Synthesis, formation mechanisms and applications

Mesocrystals, which are assemblies of crystallographically oriented nanocrystals, have received increasing attention due to their unique properties such as high crystallinity, high porosity, oriented subunit alignment, and similarity to highly sophisticated biominerals. However, the controlled synthesis of TiO 2 mesocrystals has not been realized until recently, probably because of the difficulty in accurately controlling the reaction processes that produce TiO 2 crystals. In this review, recent advances in the synthesis and applications of TiO 2 mesocrystals are summarized with particular attention paid to the mechanisms of their formation. Three typical pathways for the preparation of TiO 2 mesocrystals are discussed, namely topotactic transformation, direct synthesis in solution, and growth on supports. The potential applications of TiO 2 mesocrystals in lithium ion batteries, photocatalysis, enzyme immobilization, and antireflection materials are also described.     

Lead‐Free Halide Perovskite Nanocrystals: Crystal Structures,Synthesis, Stabilities,and Optical Properties

In recent years, there have been rapid advances in the synthesis of lead halide perovskite nanocrystals (NCs) for use in solar cells, light emitting diodes, lasers, and photodetectors. These compounds have a set of intriguing optical, excitonic, and charge transport properties, including outstanding photoluminescence quantum yield (PLQY) and tunable optical band gap. However, the necessary inclusion of lead, a toxic element, raises a critical concern for future commercial development. To address the toxicity issue, intense recent research effort has been devoted to developing lead‐free halide perovskite (LFHP) NCs. In this Review, we present a comprehensive overview of currently explored LFHP NCs with an emphasis on their crystal structures, synthesis, optical properties, and environmental stabilities (e.g., UV, heat, and moisture resistance). In addition, strategies for enhancing optical properties and stabilities of LFHP NCs as well as the state‐of‐the‐art applications are discussed. With the perspective of their properties and current challenges, we provide an outlook for future directions in this rapidly evolving field to achieve high‐quality LFHP NCs for a broader range of fundamental research and practical applications.     

A perspective on diamond composites and their electrochemical applications

Diamond composites have gained increasing interests because of their outstanding properties (e.g. robust mechanical properties, high conductivity and activity, good chemical and thermal stability, as well as excellent electrochemical properties) and their promising applications in a wide range of different fields. In this perspective, recent advances on the synthesis of diamond composites are summarized together with state-of-the-art progress in their electrochemical applications. Metal-diamond, alloy–diamond, oxide/carbide/nitride-diamond, sp² carbon/sp³ diamond, and organic-diamond composites are covered in the context of enhancing their performance of electrocatalysis, sensing, water treatment, supercapacitor, and photoelectrochemistry. Ongoing challenges and future perspectives of the synthesis and electrochemical applications of diamond composites are outlined and discussed.     

Polymer Networks: A Challenge to Theorist and Technologist

Polymer networks challenge a theorist to develop methods of their generation, describe their topology, and understand critical phenomena (gelation) during their formation. They challenge a technologist because of their unique properties based on their large-scale three-dimensional connectivity and their easy transformation of relatively low-viscosity liquids into crosslinked solids. Polymer networks challenge both, in that they are structurally very complex for the technologist who needs the theorist for understanding and controlling their structure and properties. Also, the theorist is challenged by problems appearing in technology which may initiate a basic reconsideration of the theories' assumptions. In this contribution, methods for modeling polymer network structures and their recent applications to relatively complex systems of technological importance are briefly discussed.