Inducing pH responsiveness via ultralow thiol content in polyacrylamide (micro)gels with labile crosslinks

Here we present the synthesis and characterization of pH responsive polyacrylamide microgels, synthesized via free radical polymerization of acrylamide and bis (acryloylcystamine) (BAC). The gels were made with ultralow amounts of thiol functional groups incorporated into the polymer. The resulting gel monoliths were mechanically chopped into microgel particles with size distributions ranging from 80 to 200 mum. The gels exhibit an interesting reversible pH-dependent rheological behavior which led to gelling of the colloidal suspension when the pH was increased, and a low-viscosity suspension was obtained when the pH was taken back to the original value. The viscosity of the colloidal system containing MBA crosslinked microgels remained insensitive to pH. This observation motivated further analysis; viscosity measurements of the highly viscous (gel-like) state of the BAC crosslinked microgel colloidal suspension were carried out to further understand the rheological behavior of the colloidal system. Electrophoretic mobility measurements as function of pH of the BAC and MBA crosslinked colloidal polyacrylamide microgel suspensions were performed. The swelling behavior of the microgels for both colloidal systems was also determined as function of pH using static light scattering. This swelling behavior was used to rationalize the observed rheological behavior. The work presented here demonstrates that free thiol groups present within a polymer gel matrix confer pH responsive behavior to the gel in solution. The viscosity of a BAC crosslinked microgel suspension was also measured under reducing conditions. The viscosity of the microgel suspension reduced with time, due to the breakage of the disulfide bonds in the crosslinkers.     

Study of pH-responsive microgels containing methacrylic acid: effects of particle composition and added calcium

pH-responsive microgel dispersions contain cross-linked polymer particles that swell when the pH approaches the pKa of the ionic monomer incorporated within the particles. In recent work from our group, it was demonstrated that the mechanical properties of degenerated intervertebral discs (IVDs) could be restored to normal values by injection of pH-responsive microgel dispersions (Saunders, J. M.; Tong, T.; LeMaitre, C.; Freemont, A. J.; Saunders, B. R. Soft Matter 2007, 3, 486). These dispersions change from a fluid to a gel with increasing pH. The present work investigates the pH-dependent properties of dispersions of microgel particles containing MAA (methacrylic acid) and also the effects of added Ca2+. Two microgels are discussed: microgel A is poly(EA/MAA/AM) (EA and AM are ethyl acrylate and allyl methacrylate), and microgel B is poly(EA/MAA/BDDA) (butanediol diacrylate). The pH-dependent particle properties investigated include hydrodynamic diameters and electrophoretic mobilities. The critical coagulation concentrations (CCC) of dilute dispersions and the elastic modulus (G') of concentrated, gelled microgel dispersions were also investigated. In the absence of added Ca2+, the particle swelling and G' were smallest and largest, respectively, for microgel A. The changes in hydrodynamic diameter and mobility with pH were explained in terms of a core-shell swelling mechanism. Added Ca2+ was found to significantly decrease the CCCs, extents of particle swelling, and magnitude of the electrophoretic mobility. This was attributed to the ionic cross-linking of neighboring RCOO- groups by Ca2+. It is suggested that the formation of ionic cross-links is inefficient within the microgel particles because of the presence of covalent cross-links that oppose the large-scale conformational rearrangement of neighboring RCOO- groups. The effect of Ca2+ on the properties of the gelled dispersions is important from the viewpoint of potential application in vivo. Rheological studies of the gelled microgel dispersions showed that added Ca2+ did not have a specific influence on G'. The differences observed in the presence of Ca2+ were attributed to ionic strength effects (screening). The key parameter that controls G' of the gelled microgel dispersions is pH. The results from this work suggest that the elasticity of the gels would be slightly reduced in vivo as a consequence of the high ionic strength present.     

Application of microgels as polymer supports for organic synthesis: preparation of a small phthalide library,a scavenger,and a borohydride reagent

Microgel polymers containing a series of functional groups have been prepared. These microgels were composed of cross-linked poly(styrene) and were prepared by radical polymerization in solution. The microgel polymers exhibit good solubility in an array of different organic solvents, and in addition, they can be efficiently precipitated by the addition of methanol and isolated by filtration. A nine-member phthalide library was synthesized using an aminomethyl-functionalized microgel 5. To further demonstrate the versatility of these microgel polymers, tris(2-aminoethyl)amino microgel 11 was examined as a scavenger reagent to remove unreacted isocyanate after a urea synthesis. Finally, a microgel-supported ammonium borohydride reagent 14 was successfully prepared and used as a reducing agent. Notable features of these microgels are that in all applications the progress of the reaction could be monitored by standard NMR techniques and their preparation is performed using common glassware and techniques found in all organic laboratories.     

Microgels containing methacrylic acid: effects of composition on pH-triggered swelling and gelation behaviours

pH-responsive microgels are cross-linked polymer colloids that swell when the pH approaches the pK _a of the particles. In this work, we present a comprehensive investigation of pH-triggered particle swelling and gel formation for a range of microgels containing methacrylic acid (MAA). The microgels investigated have the general composition poly(A/MAA/X), where A and X are the primary co-monomer and cross-linking monomer, respectively. The primary co-monomers were methyl methacrylate (MMA), ethyl acrylate (EA) or butyl methacrylate. The cross-linking monomers were either butanediol diacrylate (BDDA) or ethyleneglycol dimethacrylate (EGDMA). The microgels were studied using scanning electron microscopy, photon correlation spectroscopy (PCS) and dynamic rheology measurements. Gel phase diagrams were also constructed. The particles swelled significantly at pH values greater than approximately 6.0. It was shown that poly(EA/MAA/X) microgels swelled more strongly than poly(MMA/MAA/X) microgels. Furthermore, greater swelling occurred for particles prepared using EGDMA than BDDA. Concentrated dispersions of all the microgels studied exhibited pH-triggered gel formation. It was found that the fluid-to-gel transitions for the majority of the six microgel dispersions investigated could be explained using PCS data. In those cases, gelation was attributed to a colloidal glass transition. Interestingly, the microgels that were considered to have the highest hydrophobic content gelation occurred under conditions where little particle swelling was evident from PCS. The data presented show that gelled poly(EA/MAA/BDDA) and poly(MMA/MAA/EGDMA) microgel dispersions have the strongest elasticities at pH = 7.     

Effect of initial substrate concentration of the Belousov-Zhabotinsky reaction on self-oscillation for microgel system

Self-oscillation for the microgel particles ( approximately 200 nm in diameter) was studied by changing initial substrate concentrations (i.e., malonic acid, sodium bromate, and nitric acid) of the Belousov-Zhabotinsky (BZ) reaction that is used for chemical energy for the self-oscillation. The cross-linked microgels are composed of N-isopropylacrylamide and ruthenium tris(2,2'-bipyridine), Ru(bpy) 3, which is a catalyst for the BZ reaction. Comparing with the homogeneous, stirred solution of the bulk solution for the BZ reaction, swelling/deswelling oscillation of the microgels showed longer induction period, different dependence of initial substrate concentrations on oscillation period, and different oscillation rhythm. The change in oscillation for the microgels can be understood by considering the microgel network effect.     

Tuning smart microgel swelling and responsive behavior through strong and weak polyelectrolyte pair assembly

The layer-by-layer (LbL) assembly of polyelectrolyte pairs on temperature and pH-sensitive cross-linked poly(N-isopropylacrylamide)-co-(methacrylic acid), poly(NIPAAm-co-MAA), microgels enabled a fine-tuning of the gel swelling and responsive behavior according to the mobility of the assembled polyelectrolyte (PE) pair and the composition of the outermost layer. Microbeads with well-defined morphology were initially prepared by synthesis in supercritical carbon dioxide. Upon LbL assembly of polyelectrolytes, interactions between the multilayers and the soft porous microgel led to differences in swelling and thermoresponsive behavior. For the weak PE pairs, namely poly(L-lysine)/poly(L-glutamic acid) and poly(allylamine hydrochloride)/poly(acrylic acid), polycation-terminated microgels were less swollen and more thermoresponsive than native microgel, whereas polyanion-terminated microgels were more swollen and not significantly responsive to temperature, in a quasi-reversible process with consecutive PE assembly. For the strong PE pair, poly(diallyldimethylammonium chloride)/poly(sodium styrene sulfonate), the differences among polycation and polyanion-terminated microgels are not sustained after the first PE bilayer due to extensive ionic cross-linking between the polyelectrolytes. The tendencies across the explored systems became less noteworthy in solutions with larger ionic strength due to overall charge shielding of the polyelectrolytes and microgel. ATR FT-IR studies correlated the swelling and responsive behavior after LbL assembly on the microgels with the extent of H-bonding and alternating charge distribution within the gel. Thus, the proposed LbL strategy may be a simple and flexible way to engineer smart microgels in terms of size, surface chemistry, overall charge and permeability.     

Composite hydrogels with temperature sensitive heterogeneities: influence of gel matrix on the volume phase transition of embedded poly-(N-isopropylacrylamide) microgels

The thermo-responsive behaviour of poly-(N-isopropylacrylamide) (PNiPAM) microgels embedded in covalently cross-linked non-temperature-sensitive polyacrylamide (PAam) hydrogel matrixes with different compositions was investigated by using small angle neutron scattering (SANS). The composition of the composite hydrogel was varied by (a) increasing the cross-linker and acrylamide concentration leading to strong hydrogel matrixes and (b) by increasing the microgel concentration to obtain composite gels with an internal structure. Additionally we synthesized composite hydrogels by using γ-irradiation as initiation for the polymerisation. This leads to the formation of chemical bonds between the PNiPAM microgels and the surrounding polyacrylamide matrix. Thus it is possible to synthesize hydrogels without an additional cross-linker, as well as pure particle networks. Some samples were prepared at two different temperatures, below and above the volume phase transition temperature of PNiPAM, resulting in highly swollen or totally collapsed microgels during the incorporation step. The volume phase transition of microgels is not influenced by a hydrogel matrix with high acrylamide concentration independent of the preparation temperature. However, an increased cross-linker concentration leads to a corset like constraint on microgel swelling. Microgels, which are embedded in the collapsed state (at 50 °C), are not able to swell upon cooling, whereas microgels embedded in the swollen state can collapse upon heating. For samples with an increased microgel concentration, the close microgel packing was disturbed by the formation of the polyacrylamide matrix. The hydrogel matrix squeezes the microgels together and leads to partial aggregation. The experiments demonstrate how composite hydrogels with stimuli-sensitive heterogeneities can be prepared such that the full responsiveness of the embedded microgels is retained while the macroscopic dimensions of the gel are not affected by the volume phase transition of the microgels.     

Grid pattern of nanothick microgel network

A novel grid pattern of two kinds of nanothick microgels was developed by alternate patterning using photolithography. At first, 100-microm-wide nanothick PAAm microgel stripes were grafted on a polystyrene surface by UV irradiation of the photoreactive azidobenzoyl-derivatized polyallylamine-coated surface through a photomask with 100-microm-wide stripes. Then, a second set of 100-microm-wide nanothick PAAc microgel stripes were grafted across the PAAm-grated polystyrene surface by UV irradiation of the photoreactive azidophenyl-derivatized poly(acrylic acid)-coated surface through a photomask placed perpendicularly to the first set of PAAm microgel stripes. The PAAc microgel stripe pattern was formed over the PAAm microgel stripe pattern. The cross angle of the two microgel stripes could be controlled by adjusting the position of the photomask when the second microgel pattern was prepared. Swelling and shrinking of the microgels were investigated by scanning probe microscopy (SPM) in an aqueous solution. SPM observation indicated that the thickness of the gel network was 100 to 500 nm. The regions containing PAAm, PAAc, and the PAAc-PAAm overlapping microgels showed different swelling and shrinking properties when the pH was changed. The PAAm microgel swelled at low pH and shrank at high pH whereas the PAAc microgel swelled at high pH and shrank at low pH. However, the PAAc-PAAm overlapping microgel did not change as significantly as did the two microgels, indicating that the swelling and shrinking of the two gels was partially offset. The pH-induced structural change was repeatedly reversible. The novel grid pattern of nanothick microgels will find applications in various fields such as smart actuators, artificial muscles, sensors, and drug delivery systems as well as in tissue engineering and so forth.     

葡萄糖敏感微凝胶的溶胀动力学研究

通过沉淀聚合法合成了P(NIPAM-co-AA)微凝胶,然后在EDC催化下用3-氨基苯硼酸对微凝胶进行改性,制备了P(NIPAMI-co-AAPBA)微凝胶.红外光谱检测证明改性完全.改性后的微凝胶仍具有很好的温敏性,但由于引入疏水的苯硼酸基团,微凝胶的体积相转变温度大大降低.P(NIPAM-co-AAPBA)微凝胶具...     

Unperturbed volume transition of thermosensitive poly-(N-isopropylacrylamide) microgel particles embedded in a hydrogel matrix

The thermoresponsive behavior of poly-(N-isopropylacrylamide) (PNiPAM) microgels embedded in a covalently cross-linked polyacrylamide hydrogel matrix was investigated using ultraviolet-visible (UV-vis) spectroscopy, small-angle neutron scattering (SANS), and confocal laser scanning microscopy. The hydrogel synthesis was performed at two different temperatures, below and above the volume phase transition temperature of PNiPAM, resulting in highly swollen or fully collapsed PNiPAM microgel particles during the incorporation step. UV-vis spectroscopy experiments verify that the incorporation of thermosensitive microgels leads to temperature-sensitive optical properties of the composite materials. SANS measurements at different temperatures show that the thermosensitive swelling behavior of the PNiPAM microgels is fully retained in the composite material. Volume and structure criteria of the embedded microgel particles are compared to those of the free microgels in acrylamide solution. To visualize the temperature responsive behavior of larger PNiPAM particles, confocal fluorescence microscopy images of PNiPAM beads, of 40-microm size, were taken at two different temperatures. The micrographs also demonstrate the retained temperature sensitivity of the embedded microgels.     

Visualizing the interaction between poly-L-lysine and poly(acrylic acid) microgels using microscopy techniques: effect of electrostatics and peptide size

The interaction between lightly cross-linked poly(acrylic acid) (pAA) microgels (50-150 microm in diameter) and poly-L-lysine (pLys) was studied as a function of pH, ionic strength, peptide size, and concentration. The swelling response and distribution of polypeptides within microgel particles was monitored by micromanipulator-assisted light microscopy and confocal laser scanning microscopy, while binding isotherms of pLys in the microgels were determined spectrophotometrically. Conformational changes of pLys were investigated by circular dichroism. The molecular weight of pLys was found to influence the degree of peptide-induced microgel deswelling, largely due to limitation of peptides larger than the effective network mesh size to penetrate the entire gel. Large peptides were concentrated within a surface layer of the gel particles, and at low ionic strength this dense surface layer was shown to act as a largely steric barrier for further penetration of compounds into the gel core. Small peptides, however, distributed evenly throughout the microgel particles and were able to create large microgel volume reductions. The deswelling of microgels increased with decreasing pH, while the uptake of pLys was significantly reduced at low pH. The effect of ionic strength on the interactions of pLys and oppositely charged pAA microgels was moderate and only pronounced for deswelling of gels at high pH. A significant increase in the alpha-helix content of pLys interacting with the oppositely charged microgels was observed for high molecular weight peptides, and the extent of alpha-helix formation was as expected more pronounced at high pH, i.e., at high charge density of the microgels but reduced charge density of the peptides.     

Review on the dynamics and micro-structure of pH-responsive nano-colloidal systems

This review presents an overview on the research on pH-responsive microgel particles in the last 10 years. Microgels are cross-linked latex particles that are swollen in a good solvent. Significant quantitative studies have been conducted to investigate the swelling behavior (microscopic) and rheological (macroscopic) properties of the pH-responsive microgel particles as a function of neutralization degree, ionic strength, and cross-linked density. Mono-dispersed, alkali-swellable microgels containing carboxylic acid lattices, whose properties display extreme pH sensitivity in water is considered in detail in terms of swelling behavior and rheological properties. Their stability in solution and ability to undergo reversible volume phase transitions in response to pH makes them ideal model systems for the development of a semi-empirical as well as theoretical approach for predicting the viscosity of dilute and concentrated hard and soft sphere systems. The review concludes with a discussion of some recent applications of pH-responsive microgel particles.     

Synthesis, characterization and properties of biodegradable polylactic acid-β-cyclodextrin cross-linked copolymer microgels

The novel biodegradable polylactic acid-β-cyclodextrin (PLA-β-CD) cross-linked copolymer microgels were prepared by the radical copolymerization of PLA macromonomer and polymerizable β-CD derivatives. The β-CD derivatives with various numbers of polymerizable vinyl groups were synthesized from 1-allyloxy-2,3-epoxy propane (also called allylglycidyl ether, AGE) and β-CD. The chemical structures of polymerizable monomers were determined by NMR. The thermal properties, size, morphology, in vitro degradation and swelling behavior of the microgels were investigated. The results indicated that the microgels were stable under thermal conditions up to 200 °C. The microgels were spherical in aqueous solution. The hydrophilicity of the microgels increased with increasing β-CD contents, while the swelling ratios and degradation rate decreased. The more vinyl groups on β-CD, the higher cross-linked density, which resulted in a decrease of the swelling ratios and the rate of degradation.     

A photodimerization approach to crosslink and functionalize microgels

Microgels were prepared within reverse micelles via photocrosslinking. Gelation resulted from the [2 + 2] photodimerization reaction of nitrocinnamoyl (NC) groups on multi-arm polyethylene glycol (PEG) or gelatin. Because of the potential for biomedical and chemical applications, immobilization capacity within the microgels was investigated. Quantum dots (QDs), for example, share a similar size scale with proteins and can be physically trapped within the microgels. In addition, the optoelectronic properties of QDs could be utilized for analytical, imaging, and therapeutic purposes. Small molecules and recognition sequences (e.g. biotin) can also be covalently immobilized within the microgel networks through the photodimerization reaction. In the presence of biotin-PEG-NC, the resulting microgels added to streptavidin-coated plates. The microgel properties such as biodegradability and degree of swelling may be engineered for particular applications including targeted monitoring and controlled drug delivery systems.     

Plum-pudding gels as a platform for drug delivery: understanding the effects of the different components on the diffusion behavior of solutes

The internal structure of composite gels made of responsive microgel particles inserted into a bulk hydrogel (N-isopropylacrylamide microgel particles in a cross-linked dimethylacrylamide matrix) has been investigated from the diffusion behavior of poly(ethylene glycol) (PEG) probes through the network, in the absence of specific interactions between the diffusing molecules and the system. The effect of the different components has been examined, for example, the size of the probe, the bulk structure, and the microgel nature. Particles were characterized prior to their insertion into the hydrogel in order to describe their properties as a function of size and cross-linker content, thus revealing different swelling behaviors. The biggest effects on the diffusion of the PEG probes were related to the bulk structure, and no major effects were registered by the addition of different microgels into the hydrogel network. We attempt to rationalize this behavior in terms of the composite gel structure and discuss the results in terms of their meaning for controlled drug delivery strategies.     

Titrametric characterization of pH-induced phase transitions in functionalized microgels

The chain and radial functional group distributions in carboxylic acid-functionalized poly(N-isopropylacrylamide)-based microgels have significant impacts on the types of swelling responses exhibited by the microgels upon the application of a temperature and/or pH stimulus. Potentiometric, conductometric, and calorimetric titration approaches are used in this work to characterize the chain distributions of -COOH groups in five microgels prepared using different -COOH-functionalized monomers. A direct correlation is observed between the kinetically predicted formation of functional monomer blocks within the microgel, the excess Gibbs free energy of ionization, and the apparent pK(a) versus degree of ionization profiles generated from potentiometric titration. Isothermal titration calorimetry (ITC) can be used to quantify the relative number of functional groups present in microgels prepared with the same functional monomer and/or identify differences between microgels with the same bulk -COOH content but different chain distributions. In particular, microgels prepared with diacid-functionalized monomers exhibit a characteristic two-step ITC profile. For microgels with the same bulk -COOH content, the heat of ionization measured via ITC increases systematically with the overall change in both the pK(a) and the excess Gibbs free energy for microgels prepared with monoacid-functionalized monomers. Diacid monomer-functionalized microgels have lower ionization enthalpies attributable to the break-up of hydrogen-bonded intramolecular ring complexes upon carboxylic acid ionization. The inferred chain functional group distributions can be used to understand differences in microgel swelling across the pH-induced phase transition.     

Cationic polyvinylamine binding to anionic microgels yields kinetically controlled structures

Polyvinylamine (PVAm) binding (absorption and adsorption) to carboxylated microgels gave colloidally stable, cationic microgels that can be centrifuged, washed, freeze dried, and redispersed in water with no loss in colloidal stability. Because both PVAm and the carboxylated microgels are pH sensitive, changes in microgel swelling and electrophoretic mobility in response to pH change can be positive or negative depending upon pH and the PVAm content of the microgels. For a given PVAm molecular weight, the steady-state saturated mass fraction of bound PVAm in the microgels varied by a factor of four in our experiments. We proposed that the PVAm content at saturation was controlled by the relative rates of the initial attachment of PVAm chains versus the rate of attached chain spreading on and into the microgel structure. This explanation was further supported by a series of quartz crystal microbalance measurements. Finally, PVAm binding to two types of PNIPAM microgels shows general features recently reported for other polyelectrolyte types. Specifically: (1) for surface localized anionic charges on the microgels, the mass fraction of bound PVAm increased with PVAm molecular weight and vice versa; (2) in virtually all conditions, the quantity of adsorbed cationic ammonium groups was much greater than the carboxylate content of the microgel; and (3) sodium chloride additions lowered the mass fraction of bound PVAm.     

Designed glucose-responsive microgels with selective shrinking behavior

We report on the synthesis of various glucose-responsive microgels based on N-alkylacrylamide derivatives and phenylboronic acid (PBA) as a glucose sensing moiety. Depending on their chemical composition, the microgels exhibit opposite behaviors in response to glucose concentration increase: they can either swell or shrink, using two different mechanisms for glucose recognition. Both behaviors may be suitable for glucose sensing and insulin delivery. When glucose binds a single boronate receptor, the microgel swells as glucose concentration increases. This mechanism can be used to deliver a drug by diffusion through the network. In other cases, glucose binds specifically to two boronates, which creates additional cross-links within the network and provokes shrinkage. Such systems are promising for the development of sensors with improved selectivity and also as potential "intelligent" valves in microfabricated delivery systems. By a rational choice of the constituting units of the network structure, we show how to favor one or the other type of response to glucose variation. Therefore, glucose-swelling microgels operating under physiological conditions have been obtained by copolymerization with an appropriate choice of alkylacrylamide monomer and boronate derivative. At a pH above the pK(a) of the boronic acid derivative, the same structures shrink in response to glucose concentration. The nature of the cross-linker is a key parameter to enable this dual behavior. In other microgels, an amine group is introduced in the vicinity of the boronic acid, which lowers its pK(a) and favors microgel contraction at physiological pH. This work has allowed us to give some general rules to control the swelling/shrinking behavior of glucose-responsive microgels.     

Functionalised Microgels for Acrylic Coatings

Summary: Aqueous acrylic dispersions of hydroxy-functionalised copolymer microgel particles crosslinked with allyl methacrylate were synthesized by emulsion polymerization. The microgels were investigated as reactive polymer fillers in mixtures with a water-borne film-forming dispersion. Properties of coatings cast from mixtures of aqueous dispersion of hard microgel particles and film-forming water-borne dispersion were investigated. The swelling behaviour of microgels in selected solvents (aliphatic ketones) as a function of microgel composition is discussed as well. It was found that the swelling ability of microgels decreased with growing degree of crosslinking. Microgels comprising copolymerised butyl methacrylate swelled less in aliphatic ketones than microgels without this comonomer. This work was focused mainly on the influence of microgels incorporated in the commercial solvent-borne acrylic binders on the properties of coatings. It was shown that the application of microgels that were redispersed in acetone did not affect the surface appearance and transparency of coatings. Moreover, the presence of microgel network precursors accelerated film curing at ambient temperature and improved the final hardness of coatings.     

Preparation of Poly(N‐isopropylacrylamide) Microgels using Different Initiators Under Various pH Values

Ammonium persulfate (APS), 2,2′‐azobis(amidinopropane) dihydrochloride (V50) and 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) were utilized to prepare temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPAM) microgels by precipitation polymerization under various reaction pH conditions. Their particle sizes and swelling ratios depended on the reaction pH due to the pH dependence on the ionization degree of the decomposed fragments originating from the initiators and their hydrophilicity‐hydrophobicity. The more hydrophobic initiator, under the reaction pH conditions used, could be partitioned to a greater extent into the microgel particles due to the hydrophobicity of PNIPAM chains at the reaction temperature, which led to a more cross‐linked structure inside the microgels resulting in their smaller swelling ratio. pH dependence of surface charge density of the microgels with amidino groups or carboxylic acid groups on their surfaces was evidenced by the variation of their zeta potentials as a function of pH.