Interaction of Methane with Single-Walled Carbon Nanotubes： Role of Defects,Curvature and Nanotubes Type

We investigate the interaction of single-walled carbon nanotubes （SWCNTs） and methane molecule from the first principles. Adsorption energies are calculated, and methane affinities for the typical semiconducting and metallic nanotubes are compared. We also discuss role of the structural defects and nanotube curvature on the adsorption capability of the SWCNTs. We could observe larger adsorption energies for the metallic CNTs in comparison with the semiconducting CNTs. The obtained results for the zig zag nanotubes with various diameters reveal that the adsorption energy is higher for nanotubes with larger diameters. For defected tubes the adsorption energies are calculated for various configurations such as methane molecule approaching to the defect sites pentagon, hexagon, and heptagon in the tube surface. The results show that the introduce defects have an important contribution to the adsorption mechanism of the methane on SWNTs.     

Electronics and Structural Properties of Single-Walled Carbon Nanotubes Interacting with a Glucose Molecule：ab initio Calculations

The adsorption of glucose molecule on single-walled carbon nanotubes (SWCNTs) is investigated by density functional theory calculations. Adsorption energies and equilibrium distances are evaluated, and glucose binding to the typical semiconducting and metallic nanotubes with various diameters and chirality are compared. We also investigated the role of the structural defects on the adsorption capability of the SWCNTs. We could observe larger adsorption energies for the larger diameters semiconducting CNTs, while the story is paradoxical for the metallic CNTs. The obtained results reveal that the adsorption energy is significantly higher for nanotubes with higher chiral angles. Finally, the adsorption energies are calculated for defected nanotubes for various configurations such as glucose molecule approaching to the pentagon, hexagon, and heptagon sites in the tube surface. We find that the respected defects have a minor contribution to the adsorption mechanism of the glucose on SWNTs. The calculation of electron transfers and the density of states supports that the electronic properties of SWCNTs do not change significantly after the gluycose molecular adsorption. Consequently, one can predict that presence of glucose would neither modify the electronic structure of the SWCNTs nor direct to a change in the conductivity of the intrinsic nanotubes.     

Electronics and Structural Properties of Single-Walled Carbon Nanotubes Interacting with a Glucose Molecule: ab initio Calculations

The adsorption of glucose molecule on single-walled carbon nanotubes(SWCNTs)is investigated by density functional theory calculations.Adsorption energies and equilibrium distances are evaluated,and glucose binding to the typical semiconducting and metallic nanotubes with various diameters and chirality are compared.We also investigated the role of the structural defects on the adsorption capability of the SWCNTs.We could observe larger adsorption energies for the larger diameters semiconducting CNTs,while the story is paradoxical for the metallic CNTs.The obtained results reveal that the adsorption energy is significantly higher for nanotubes with higher chiral angles.Finally,the adsorption energies are calculated for defected nanotubes for various configurations such as glucose molecule approaching to the pentagon,hexagon,and heptagon sites in the tube surface.We find that the respected defects have a minor contribution to the adsorption mechanism of the glucose on SWNTs.The calculation of electron transfers and the density of states supports that the electronic properties of SWCNTs do not change significantly after the gluycose molecular adsorption.Consequently,one can predict that presence of glucose would neither modify the electronic structure of the SWCNTs nor direct to a change in the conductivity of the intrinsic nanotubes.     

Optimum degree of functionalization for carbon nanotubes

Covalent functionalizations, especially oxidization and derivative functionalization, significantly improve the surface characteristics of carbon nanotubes, but also bring undesired devastation of sidewalls. This paper presents a theoretic model to investigate double-edge effects of covalent functionalization on carbon nanotubes for the polymer composite application. An optimal degree of functionalization is proposed and calculated based on the trade-off of required load-transfer and induced devastation of nanotube sidewalls. The negative effect on elastic modulus is also calculated. For oxidization-based functionalization of originally defect-free nanotubes, the calculation results indicate that about 10% functionalization degree is suggested to be optimum for the balance of efficient load-transfer and conspicuous devastation from the highly covalent functionalization. The original defects in nanotube surface also reduce the optimum functionalization degree and the reduction is dependent on the original defect concentration. The computational results indicate that nanotube diameter and percentages in the polymer composites show considerably effect on the optimum functionalization degree. Carbon nanotubes with smaller diameter show lower optimum functionalization degree. Increasing percentage of carbon nanotubes in the polymer composites also leads to lower optimum functionalization degree.     

Study of titanium adsorption on perfect and defected BC3 nanotubes using density functional theory

Density functional theory calculations were used to study the titanium (Ti) adsorption on perfect and defected (4, 0) BC₃ nanotubes, considering Stone–Wales and vacancy defects. The binding energy values for these nanotubes were larger than the corresponding values for carbon nanotubes. The charge transfer from the Ti atom to nanotube was observed for all systems studied. The most exothermic binding process occurred for the Ti adsorption on a native V_B defect, which showed minimum structural deformation with respect to a perfect BC₃ tube. In the case of a nanotube with a reconstructed carbon vacancy, the adsorption of Ti generated a half-metallic anti-ferromagnet. The results obtained in this paper are relevant for spintronics and hydrogen adsorption applications.     

Adsorption of the insensitive explosive TATB on single-walled carbon nanotubes

The non-covalent adsorption of the insensitive explosive TATB (1,3,5-triamino-2,4,6-trinitrobenzene) on the sidewalls of single-walled carbon nanotubes (CNTs) has been calculated using an ONIOM approach. It was found that TATB deformed remarkably when attached non-covalently on the surface of CNTs, especially on the inner wall of the nanotubes. The diameter of the nanotube determined the degree of distortion of the inner-adsorbed TATB, but had little effect on the deformation of the outer-attached TATB. The non-covalent combination of TATB with the nanotube is an exothermic process due to the negative adsorption energy. TATB adsorption on the inner wall of nanotubes was energetically more favorable than that on the outer wall of the nanotubes. In both cases, the adsorption became more stable with increasing diameter of the nanotube. Our theoretical results can be used as a guideline for the design of energetic nanocomposites based on CNTs and aromatic nitro-explosives.     

Theoretical study of the adsorption of CO2 on tungsten carbide nanotubes

The adsorption of CO₂ on the single-walled tungsten carbide nanotubes has been investigated employing density functional theory method. The center of a hexagon of tungsten and carbon atoms in sites on tungsten carbide nanotube surfaces is the most stable adsorption site for CO₂ molecule, with a binding energy of −1.68 eV (−38.72 kcal/mol) and a WO binding distance of 1.95 Å. Furthermore, the adsorption of CO₂ on the single-walled carbon nanotubes has been investigated. Our first-principles calculations predict that the CO₂ adsorptive capacity of tungsten carbide nanotubes is about quadruple that of carbon nanotubes. This might have potential for greenhouse gas detection and bioremediation.     

Surface exciton-plasmons and optical response of small-diameter carbon nanotubes

We study theoretically the interactions of excitonic states with surface electromagnetic modes of small-diameter (≲1 nm) semiconducting single-walled carbon nanotubes. We show that these interactions can result in strong exciton-surface-plasmon coupling. The exciton absorption lineshape exhibits the line (Rabi) splitting ∼0.1–0.3 eV as the exciton energy is tuned to the nearest interband surface plasmon resonance of the nanotube so that the mixed strongly coupled surface plasmon-exciton excitations are formed. We discuss possible ways to bring the exciton in resonance with the surface plasmon. The exciton-plasmon Rabi splitting effect we predict here for an individual carbon nanotube is close in its magnitude to that previously reported for hybrid plasmonic nanostructures artificially fabricated of organic semiconductors deposited on metallic films. We expect this effect to open up paths to new tunable optoelectronic device applications of semiconducting carbon nanotubes.     

First-principle study of interaction of molecular hydrogen with BC<Subscript>3</Subscript> composite single-walled nanotube

The physisorption of molecular hydrogen in BC₃ composite single-walled nanotube, investigated using density functional theory, was compared with single-walled carbon nanotube. Both external and internal adsorption sites of these two nanotubes have been studied with the hydrogen molecular axis oriented parallel to the nanotube wall. The calculated results show that: ([see full textsee full text]) the physisorption energies of a H₂ molecule are larger for BC₃(8,0) composite nanotube than for C(8,0) nanotube at all adsorption sites examined. ([see full textsee full text]) For these two nanotubes, the physisorption energies are larger for hydrogen bound inside the nanotubes than for adsorption outside the nanotubes. The different behavior between these two nanotubes is explained by the contour plots of electron density and charge-density difference of them. The present computations suggest that BC₃ nanotube may be a better candidate for hydrogen storage than carbon nanotube.     

Adsorption of hydrogen on normal and pentaheptite single wall carbon nanotubes

Density functional calculations of the physisorption of molecular hydrogen and the dissociative atomic chemisorption on the external surface of hexagonal and pentaheptite carbon nanotubes, have been carried out. Physisorption binding energies are near 100 meV/molecule and are similar on metallic and semiconducting nanotubes. Full coverage of the nanotube with one molecule per graphitic hexagon decreases the binding energy per molecule. Chemisorption binding energies per H atom are larger on pentaheptites than on hexagonal carbon nanotubes. The molecular physisorption and dissociative chemisorption states on pentaheptites have very similar total energies (some chemisorbed states are even slightly more stable than the physisorbed states), while on hexagonal carbon nanotubes molecular physisorption is more stable than dissociative chemisorption. However, a substantial energy barrier has to be overcome to go from physisorption to dissociative chemisorption in both types of nanotubes.     

Optical response of small-diameter semiconducting carbon nanotubes under exciton-surface-plasmon coupling

We analyze the optical response of small-diameter (?1 nm) semiconducting carbon nanotubes under the exciton-surface-plasmon coupling. Calculated optical absorption lineshapes exhibit the significant line (Rabi) splitting ∼0.1-0.3 eV as the exciton energy is tuned to the nearest interband surface plasmon resonance of the nanotube so that the mixed strongly coupled surface plasmon-exciton excitations are formed. We discuss possible ways to bring the exciton in resonance with the surface plasmon. The exciton-plasmon Rabi splitting effect we predict here for an individual carbon nanotube is close in its magnitude to that previously reported for hybrid plasmonic nanostructures artificially fabricated of organic semiconductors deposited on metallic films. We believe this effect may be used for the development of carbon nanotube based tunable optoelectronic device applications in areas such as nanophotonics and cavity quantum electrodynamics.     

A Theoretical Study of a Single-Walled ZnO Nanotube as a Sensor for H_2 O Molecules

We have studied the property of single-walled ZnO nanotubes with adsorbed water molecules, and theoretically designed a new sensor for detecting water molecules using single-walled ZnO nanotubes using a combination of density functional theory and the non-equilibrium Green's function method. Details of the geometric structures and adsorption energies of the H 2 O molecules on the ZnO nanotube surface have been investigated. Our computational results demonstrate that the formation of hydrogen bonding between the H 2 O molecules and the ZnO nanotube, and adsorption energies of the H 2 O molecules on the ZnO nanotube are larger than the adsorption energies of other gas molecules present in the atmospheric environment. Moreover, the current-voltage curves of the ZnO nanotube with and without H 2 O molecules adsorbed on its surface are calculated, the results of which showed that the H 2 O molecules form stable adsorption configurations that could lead to the decrease in current. These results suggest that the single-walled ZnO nanotubes are able to detect and monitor the presence of H 2 O molecules by applying bias voltages.     

A Theoretical Study of a Single-Walled ZnO Nanotube as a Sensor for H2O Molecules

We have studied the property of single-walled ZnO nanotubes with adsorbed water molecules, and theoretically designed a new sensor for detecting water molecules using single-walled ZnO nanotubes using a combination of density functional theory and the non-equilibrium Green's function method. Details of the geometric structures and adsorption energies of the H₂O molecules on the ZnO nanotube surface have been investigated. Our computational results demonstrate that the formation of hydrogen bonding between the H₂O molecules and the ZnO nanotube, and adsorption energies of the H₂O molecules on the ZnO nanotube are larger than the adsorption energies of other gas molecules present in the atmospheric environment. Moreover, the current-voltage curves of the ZnO nanotube with and without H₂O molecules adsorbed on its surface are calculated, the results of which showed that the H₂O molecules form stable adsorption configurations that could lead to the decrease in current. These results suggest that the single-walled ZnO nanotubes are able to detect and monitor the presence of H₂O molecules by applying bias voltages.     

Entropy-driven adsorption of carbon nanotubes on (0 0 1) and (1 1 1) surfaces of CeO2 islands grown on sapphire substrate

According to the aim to compose combinatorial material by adsorption of carbon nanotubes onto the structured CeO₂ surface the interaction of the armchair (5,5) and zigzag (8,0) nanotubes with the (0 0 1) and (1 1 1) surfaces of CeO₂ islands have been investigated by theoretical methods. The thermodynamics of the adsorption were studied at the low surface coverage region. The interaction energy between the nanotube and the different CeO₂ surfaces shows significant increase when the size of the interface reaches 7–8 unit cells of CeO₂ and it remains unchanged in the larger interface region. However, the entropy term of the adsorption is significantly high when the distances of CeO₂ islands are equal to 27 nm (adsorption of armchair (5,5) nanotube) or 32 nm (adsorption of zigzag (8,0) nanotube). This property supports adsorption of nanotubes onto CeO₂ surfaces which possesses a very specific surface morphology. A long-wave vibration of nanotubes was identified as background of this unexpected phenomenon. This observation could be applicable in the development of such procedures where the nanotube adsorption parallel to the surface is aimed to perform.     

Electronic structures and transport properties of sulfurized carbon nanotubes

The electronic and transport properties of side-walled sulfurized (8, 0) zigzag carbon nanotube were investigated by using density functional theory coupled with a non-equilibrium Green function approach. It is found that the adsorption of the sulfur chains largely reduces the bandgap of the semiconducting (8, 0) carbon nanotube, even changing it into a metallic one. More importantly, the transmission eigenstates around the Fermi level are contributed by not only the sulfur chains but also the complex system made of the sulfur chains and the single-walled carbon nanotube. Our results provide a method to improve the conductivity and utilization rate of the surface in the electrodes of supercapacitor which are made of the carbon nanotubes.     

碳纳米管中点缺陷对热导率影响的正交试验模拟分析

在碳纳米管的制备过程中, 各种点缺陷不可避免地存在于其晶格结构中, 对于碳管的热输运性质造成不可忽视的影响. 使用非平衡分子动力学方法, 选用反应经验键序势能, 模拟计算含有缺陷的碳纳米管的热导率. 尝试采用正交试验方法设计算例, 不但减少了计算量, 并且利于分析缺陷类型、 管长和管径三种结构因素对缺陷造成的热导率下降影响的主次和趋势. 重点研究了掺杂、 吸附和空位三类点缺陷的影响, 与无缺陷完整碳纳米管进行比较, 开展缺陷效应分析, 并进一步考察了环境温度等因素的影响. 模拟结果表明, 相对完整无缺陷碳管, 含有点缺陷的碳管热导率显着下降; 在有缺陷存在的情况下, 缺陷的类型对碳管热导率的影响最大, 管径次之, 管长影响相对最小; 缺陷类型对热导率影响力从大到小依次为: 空位 > 掺杂 > 吸附; 不同环境温度下, 点缺陷对碳管热导率的影响不尽相同.     

Selective growth of carbon nantoubes on SiO2/Si substrate

Three-step raising temperature process was employed to fabricate carbon nanotubes by pyrolysis of ferrocene/melamine mixtures on silica and single crystalline silicon wafers respectively. Then the morphologies, structures and compositions of obtained carbon nanotubes are investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscope (EDX) and electron energy-loss spectroscopy (EELS). TEM and SEM observation shows that on silica substrate, high-oriented carbon nanotube can grow compactly to form continuous film on both frontal and cross-section surfaces, but on silicon substrate, only can form on cross-section surface. These carbon nanotubes have much irregular cup-like structure, and with outer diameter varying from 25 nm to 35 nm. At the top end of carbon nanotube there is a catalyst particle. EDX analysis reveals that the particle are iron cluster, and EELS spectrum indicates that the nanotube is composed of pure carbon. Finally, the effect of substrate surface roughness on the growth behavior of carbon nanotubes has been discussed.     

Multiwalled carbon nanotubes effect on the bioavailability of artemisinin and its cytotoxity to cancerous cells

Artemisinin regarded as one of the most promising anticancer drugs can bind to DNA with a binding constant of 1.04 × 10⁴ M⁻¹. The electrochemical experiments indicated that for longer incubation time periods, the reduction peak current of artemisinin on carbon nanotube modified electrode increases. Therefore, the uptake of drug molecules from a solution into CNTs will be achieved automatically by adsorption of 88.7% of artemisinin onto carbon nanotubes surface without alteration in drug properties. Hence, capability of carbon nanotubes to have synergistic effect on the bioavailability of artemisinin was investigated. Experimental tests on K562 cancer cell lines growth by MTT assay proved that multi-walled carbon nanotubes can enhance the cytotoxity of artemisinin to the targeted cancer cells with unprecedented accuracy and efficiency. The IC₅₀ values were 65 and 35 μM for artemisinin and artemisinin loaded on multi-walled carbon nanotubes, respectively; demonstrating that artemisinin loaded on multi-walled carbon nanotubes is more effective in inhibition of cancer cell lines growth.     

Amino acid adsorption on single-walled carbon nanotubes

We investigate and discuss the adsorption of a few amino acids on (3,3) carbon nanotubes and on graphite sheets through calculations within density functional theory. Results show weak binding of the biomolecules on both substrates, but through generally favourable adsorption pathways. Zwitterion adsorption through the charged amine and carboxylate groups are bound stronger to the nanotube surface in comparison to their nonionic counterparts, as well as on histidine, phenylalanine, and cysteine side chain groups fixed in specific orientations. Binding strengths on graphite suggest dissimilar trends for amino acid interactions with increasing nanotube diameter.     

Pressure dependence of the radial breathing mode of carbon nanotubes: the effect of fluid adsorption

The pressure dependence of shifts in the vibrational modes of individual carbon nanotubes is strongly affected by the nature of the pressure transmitting medium as a result of adsorption at the nanotube surface. The adsorbate is treated as an elastic shell which couples with the radial breathing mode (RBM) of the nanotube via van der Waal interactions. Using analytical methods as well as molecular simulation, we observe a low frequency breathing mode for the adsorbed fluid at approximately 50 cm-1, as well as diameter dependent upshifts in the RBM frequency with pressure, suggesting metallic nanotubes may wet more than semiconducting ones.