Development of Gas-Chromatographic Method for Simultaneous Determination of Cannabinoids and Terpenes in Hemp

An original gas chromatographic method has been developed for simultaneous determination of major terpenes and cannabinoids in plant samples and their extracts. The main issues to be addressed were the large differences in polarity and volatility between both groups of analytes, but also the need for an exhaustive decarboxylation of cannabinoid acidic forms. Sample preparation was minimised, also by avoiding any analyte derivatisation. Acetone was found to be the most appropriate extraction solvent. Successful chromatographic separation was achieved by using a medium polarity column. Limits of detection ranged from 120 to 260 ng/mL for terpenes and from 660 to 860 ng/mL for cannabinoids. Parallel testing proved the results for cannabinoids are comparable to those obtained from established HPLC methods. Despite very large differences in concentrations between both analyte groups, a linear range between 1 and 100 µg/mL for terpenes and between 10 and 1500 µg/mL for cannabinoids was determined.     

Quantitative analysis of cannabinoids from Cannabis sativa using 1H-NMR

A (1)H-NMR method has been developed for the quantitative analysis of pure cannabinoids and for cannabinoids present in Cannabis sativa plant material without any chromatographic purification. The experiment was performed by the analysis of singlets in the range of delta 4.0-7.0 in the (1)H-NMR spectrum, in which distinguishable signals of each cannabinoid are shown. Quantitation was performed by calculating the relative ratio of the peak area of selected proton signals of the target compounds to the known amount of the internal standard, anthracene. For this method no reference compounds are needed. It allows rapid and simple quantitation of cannabinoids with a final analysis time of only 5 min without the need for a pre-purification step.     

LC/ESI-MS/MS method for quantification of 28 synthetic cannabinoids in neat oral fluid and its application to preliminary studies on their detection windows

Serum and urine samples are commonly used for the analysis of synthetic cannabinoids in biofluids; however, their utilization as analytical matrices for drug abstinence control features some substantial drawbacks. While for blood collection invasive sampling is inevitable, the urinary analysis of synthetic cannabinoids is limited by the lack of available reference standards of the respective major metabolites. Moreover, the long detectability of synthetic cannabinoids in both matrices hampers the identification of a recent synthetic cannabinoid use. This article describes the development, validation and application of an LC/ESI-MS/MS method for the quantification of 28 synthetic cannabinoids in neat oral fluid (OF) samples. OF samples were prepared by protein precipitation using ice-cold acetonitrile. Chromatographic separation was achieved by gradient elution on a Luna Phenyl Hexyl column (50?×?2 mm, 5 μm), while detection was carried out on a QTrap 4000 instrument in positive ionization mode. The limits of detection ranged from 0.02 to 0.40 ng/mL, whereas the lower limits of quantification ranged from 0.2 to 4.0 ng/mL. The method was applied to authentic samples collected during two preliminary studies in order to obtain insights into the general detectability and detection windows of synthetic cannabinoids in this matrix. The results indicate that synthetic cannabinoids are transferred from the blood stream into OF and vice versa only at a very low rate. Therefore, positive OF samples are due to contamination of the oral cavity during smoking. As these drug-contaminations could be detected up to approximately 2 days, neat oral fluid appears to be well suited for detection of a recent synthetic cannabinoid use.

Cannabinoids—Characteristics and Potential for Use in Food Production

Scientific demonstrations of the beneficial effects of non-psychoactive cannabinoids on the human body have increased the interest in foods containing hemp components. This review systematizes the latest discoveries relating to the characteristics of cannabinoids from Cannabis sativa L. var. sativa, it also presents a characterization of the mentioned plant. In this review, we present data on the opportunities and limitations of cannabinoids in food production. This article systematizes the data on the legal aspects, mainly the limits of Δ9-THC in food, the most popular analytical techniques (LC-MS and GC-MS) applied to assay cannabinoids in finished products, and the available data on the stability of cannabinoids during heating, storage, and access to light and oxygen. This may constitute a major challenge to their common use in food processing, as well as the potential formation of undesirable degradation products. Hemp-containing foods have great potential to become commercially popular among functional foods, provided that our understanding of cannabinoid stability in different food matrices and cannabinoid interactions with particular food ingredients are expanded. There remains a need for more data on the effects of technological processes and storage on cannabinoid degradation.     

A search for properties which produce discrimination between cannabinoid psychoactivity and analgesic activity

One long-range goal of our work has been the design of cannabinoid analgesics with reduced psychopharmacological liability. We review here the progress we have made toward this goal. When we began our work on the cannabinoids, no cannabinoid analgesic had been reported that did not also possess significant psychoactivity. We approached the cannabinoid problem by calculating molecular reactivity characteristics (MRCS ) of template molecules for each activity: (?)-trans-delta-9-tetrahydrocannabinol (Δ⁹-THC) for psychoactivity, and (?)-9-nor-9-betahydroxyhexahydrocannabinol (9-nor-9β-OH? HHC) for analgesic activity. We then compared the MRC s of each template with the MRCS of a carefully chosen set of other cannabinoids (both active and inactive). Our focus in the calculation of MRCS was on accessible conformations of each subject molecule and on the molecular electrostatic potential generated in key planes by each accessible conformer. Our working hypothesis concerning the molecular basis of psychopharmacological activity in the cannabinoids was that activity is conferred by the set of molecular properties generated (1) by the orientation of the lone pairs of electrons of the phenyl group hydroxyl oxygen and (2) by the orientation of the carbocyclic ring and its C–9 substituent relative to this oxygen. Our working hypothesis concerning the molecular basis of cannabinoid analgesic activity was that activity is conferred by the set of molecular properties generated by the presence and relative location of two negative potential regions in the top half of the cannabinoid analgesic molecule. Our work thus far has revealed important steric and electronic features of the cannabinoids that may be used to enhance discrimination. We have shown that a simple structural feature, a C–9 substituent protruding into the α face of the molecule, can abolish or significantly diminish psychoactivity. We have also demonstrated that a free phenol group is not an absolute requirement for activity. Instead, we have found that compounds that do not possess free phenolic hydrogens, but that do maintain the orientation of the lone pairs of electrons of the “phenolic” oxygen toward the carbocyclic ring, exhibit selectivity toward analgesia.     

UV-B RADIATION EFFECTS ON PHOTOSYNTHESIS, GROWTH and CANNABINOID PRODUCTION OF TWO Cannabis sativa CHEMOTYPES

The effects of UV-B radiation on photosynthesis, growth and cannabinoid production of two greenhouse-grown C. sativa chemotypes (drug and fiber) were assessed. Terminal meristems of vegetative and reproductive tissues were irradiated for 40 days at a daily dose of 0, 6.7 or 13.4 kJ m^-2 biologically effective UV-B radiation. Infrared gas analysis was used to measure the physiological response of mature leaves, whereas gas-liquid chromatography was used to determine the concentration of cannabinoids in leaf and floral tissue.
There were no significant physiological or morphological differences among UV-B treatments in either drug- or fiber-type plants. The concentration of Δ⁹-tetrahydrocannabinol (Δ⁹-THC), but not of other cannabinoids, in both leaf and floral tissues increased with UV-B dose in drug-type plants. None of the cannabinoids in fiber-type plants were affected by UV-B radiation.
The increased levels of Δ⁹-THC in leaves after irradiation may account for the physiological and morphological tolerance to UV-B radiation in the drug-type plants. However, fiber plants showed no comparable change in the level of cannabidiol (a cannabinoid with UV-B absorptive characteristics similar to Δ⁹ THC). Thus the contribution of cannabinoids as selective UV-B filters in C. sativa is equivocal.     

Comparative proteomic and phosphoproteomic profiling of pancreatic adenocarcinoma cells treated with CB1 or CB2 agonists

The pancreatic adenocarcinoma cell line Panc1 was treated with cannabinoid receptor ligands (arachidonylcyclopropylamide or GW405833) in order to elucidate the molecular mechanism of their anticancer effect. A proteomic approach was used to analyze the protein and phosphoprotein profiles. Western blot and functional data mining were also employed in order to validate results, classify proteins, and explore their potential relationships. We demonstrated that the two cannabinoids act through a widely common mechanism involving up‐ and down‐regulation of proteins related to energetic metabolism and cell growth regulation. Overall, the results reported might contribute to the development of a therapy based on cannabinoids for pancreatic adenocarcinoma.     

Optimisation and characterisation of marihuana extracts obtained by supercritical fluid extraction and focused ultrasound extraction and retention time locking GC‐MS

The optimisation of focused ultrasound extraction and supercritical fluid extraction of volatile oils and cannabinoids from marihuana has been accomplished by experimental design approach. On the one hand, the focused ultrasound extraction method of volatile compounds and cannabinoids was studied based on the optimisation of cyclohexane and isopropanol solvent mixtures, and the instrumental variables. The optimal working conditions were finally fixed at isopropanol/cyclohexane 1:1 mixture, cycles (3 s^?1), amplitude (80%) and sonication time (5 min). On the other hand, the supercritical fluid extraction method was optimised in order to obtain a deterpenation of the plant and a subsequent cannabinoid extraction. For this purpose, pressure, temperature, flow and co‐solvent percentage were optimised and the optimal working conditions were set at 100 bar, 35°C, 1 mL/min, no co‐solvent for the terpenes and 20% of ethanol for the cannabinoids. Based on the retention time locking GC‐MS analysis of the supercritical fluid extracts the classification of the samples according to the type of plant, the growing area and season was attained. Finally, three monoterpenes and three cannabinoids were quantified in the ranges of 0.006–6.2 μg/g and 0.96–324 mg/g, respectively.     

Attempts of Ranking in a Series of Synthetic Nonpsychotropic Cannabinoids

Abstract

Dexanabinol and other synthetic 6aS-trans cannabinoids are devoid of cannabimimetic activity, as they do not have affinity toward cannabinoid receptors. On the other hand, these compound bind to the NMDA receptor and possess neuroprotective properties. A ranking of 6aS trans cannabinoids based on their NMDA receptor binding affinity and by using a variety of calculated properties included in a fully computerized expert system has been attempted. The results of the study indicate that either the present isosteric-isoelectronic-based ranking criteria is not adequate to reproduce NMDA receptor binding or that some other members of the series rather than dexanabinol are the true lead compounds of 6aS-trans cannabinoids.     

Deposition of JWH-018, JWH-073 and their metabolites in hair and effect of hair pigmentation

Analysis of drugs in hair is often used as a routine method to obtain detailed information about drug ingestion. However, few studies have been conducted on deposition of synthetic cannabinoids and metabolites in hair. The first purpose of this study was to establish and validate an analytical method for detection of JWH-018, JWH-073, and their metabolites in hair, by use of UHPLC–MS–MS, for forensic application. The second purpose was to investigate the distribution of synthetic cannabinoids metabolites in hair and the effect of hair pigmentation, by use of an animal model. For this, JWH-073 was chosen as a representative synthetic cannabinoid. Finally, the developed method was applied to hair samples from 18 individuals suspected of synthetic cannabinoids use. JWH-018, JWH-073, and their metabolites were extracted from hair with methanol. The extract was then filtered and analyzed by UHPLC–MS–MS with an electrospray ion source in positive-ionization mode. Validation proved the method was selective, sensitive, accurate, and precise, with acceptable linearity within the calibration ranges. No significant variations were observed when different sources of both human and rat hair were used. The animal study demonstrated that JWH-073 N-COOH M was the major metabolite of JWH-073 in rat hair, and hair pigmentation did not have a significant effect on incorporation of JWH-073 and its metabolites into hair. In the analysis of 18 authentic hair samples, only JWH-018, JWH-018 N-5-OH M, and JWH-073 were detected, with wide variation in concentrations.     

Screening of cannabinoids in industrial‐grade hemp using two‐dimensional liquid chromatography coupled with acidic potassium permanganate chemiluminescence detection

Widely known for its recreational use, the cannabis plant also has the potential to act as an antibacterial agent in the medicinal field. The analysis of cannabis plants/products in both pharmacological and forensic studies often requires the separation of compounds of interest and/or accurate identification of the whole cannabinoid profile. In order to provide a complete separation and detection of cannabinoids, a new two‐dimensional liquid chromatography method has been developed using acidic potassium permanganate chemiluminescence detection, which has been shown to be selective for cannabinoids. This was carried out using a Luna 100 Å CN column and a Poroshell 120 EC‐C₁₈ column in the first and second dimensions, respectively. The method has utilized a large amount of the available separation space with a spreading angle of 48.4° and a correlation of 0.66 allowing the determination of more than 120 constituents and mass spectral identification of ten cannabinoids in a single analytical run. The method has the potential to improve research involved in the characterization of sensitive, complex matrices.     

Analysis of cannabinoids in fiber hemp plant varieties (Cannabis sativa L.) by high-performance liquid chromatography

Summary An analytical procedure was developed for the detection of neutral and acidic cannabinoids in herbal cannabis without the need of any preliminary derivatization. The method was used to assay cannabinoid content of over one hundred fiber hemp samples grown in different Italian localities and harvested at different maturation level degrees during the summer. No interferences were observed due to the vegetal matrix. The influence of genetic factors and environmental conditions on cannabinoid content is discussed; the results may be of interest to enhance potential of fiber hemp in compliance with law enforcement purposes. Part of this work was presented at the 7^th Meeting on Recent Developments in Pharmaceutical Analysis, September 16–20, 1997, Island of Elba, Italy.     

Elucidation of the Chemical Structure of a Gas Chromatographic Artifact of Synthetic Cannabinoid <Emphasis Type="Italic">N</Emphasis>-(1-Carbamoyl-2-Methylpropyl)-1-(Cyclohexylmethyl)-1<Emphasis Type="Italic">H</Emphasis>-Indazol-3Ccarboxamide by High-Resolution Mass Spectrometry

Synthetic cannabinoids are the most popular psychoactive compounds on the illegal market. In the gas chromatographic determination, some synthetic cannabinoids undergo chemical transformations because of their thermal interaction with the chromatographic system. This paper is devoted to the elucidation of the structure of a gas chromatographic artifact formed from synthetic cannabinoid N-(1-carbamoyl-2-methylpropyl)-1-(cyclohexylmethyl)-1H-indazol-3-carboxamide as a result of dehydration of its terminal carbamoyl moiety. The chemical structure of the artifact is determined by high-resolution mass spectrometry.     

Identification and quantification of cannabinoids in Cannabis sativa L. plants by high performance liquid chromatography-mass spectrometry

High performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) has been successfully applied to cannabis plant extracts in order to identify cannabinoid compounds after their quantitative isolation by means of supercritical fluid extraction (SFE). MS conditions were optimized by means of a central composite design (CCD) approach, and the analysis method was fully validated. Six major cannabinoids [tetrahydrocannabinolic acid (THCA), tetrahydrocannabinol (THC), cannabidiol (CBD), tetrahydrocannabivarin (THCV), cannabigerol (CBG), and cannabinol (CBN)] were quantified (RSD < 10%), and seven more cannabinoids were identified and verified by means of a liquid chromatograph coupled to a quadrupole-time-of-flight (Q-ToF) detector. Finally, based on the distribution of the analyzed cannabinoids in 30 Cannabis sativa L. plant varieties and the principal component analysis (PCA) of the resulting data, a clear difference was observed between outdoor and indoor grown plants, which was attributed to a higher concentration of THC, CBN, and CBD in outdoor grown plants. Graphical Abstract

Representative figure of the identification and quantification process of cannabinoids     

Constituents of cannabis sativa L. XII—mass spectral fragmentation patterns for some. Cannabinoid acid as their TMS derivatives

Fragmentation schemes for a number of TMS derivatized cannabinoid acids are described. Specific fragmentation pathways and rearrangement mechanisms were determined based on the ion composition of deuterium labeled derivatives. Significant differences in the mode of fragmentation of the two isomeric Δ⁹-tetrahydrocannabinolic acids are described. These results are based on information obtained from deuterium labeling and high resolution data or by the extension of previously reported mechanisms for neutral cannabinoids. Comparisons of the fragmentation schemes between the neutral and acidic cannabinoids are used to confirm many of the fragmentation mechanisms.     

Direct quantification of cannabinoids and cannabinoid glucuronides in whole blood by liquid chromatography–tandem mass spectrometry

The first method for quantifying cannabinoids and cannabinoid glucuronides in whole blood by liquid chromatography–tandem mass spectrometry (LC–MS/MS) was developed and validated. Solid-phase extraction followed protein precipitation with acetonitrile. High-performance liquid chromatography separation was achieved in 16 min via gradient elution. Electrospray ionization was utilized for cannabinoid detection; both positive (Δ⁹-tetrahydrocannabinol [THC] and cannabinol [CBN]) and negative (11-hydroxy-THC [11-OH-THC], 11-nor-9-carboxy-THC [THCCOOH], cannabidiol [CBD], THC-glucuronide, and THCCOOH-glucuronide) polarity were employed with multiple reaction monitoring. Calibration by linear regression analysis utilized deuterium-labeled internal standards and a 1/x ² weighting factor, yielding R ² values >0.997 for all analytes. Linearity ranged from 0.5 to 50 μg/L (THC-glucuronide), 1.0–100 μg/L (THC, 11-OH-THC, THCCOOH, CBD, and CBN), and 5.0–250 μg/L (THCCOOH-glucuronide). Imprecision was <10.5% CV, recovery was >50.5%, and bias within ±13.1% of target for all analytes at three concentrations across the linear range. No carryover and endogenous or exogenous interferences were observed. This new analytical method should be useful for quantifying cannabinoids in whole blood and further investigating cannabinoid glucuronides as markers of recent cannabis intake.     

Simultaneous spectrophotometric determination of carbamazepine and phenytoin in serum by PLS regression and comparison with HPLC

Carbamazepine (CBZ) and phenytoin (PHT) are two antiepileptic drugs which are used simultaneously. In this paper a partial least-squares (PLS) calibration method is described for the simultaneous spectrophotometric determination of CBZ and PHT in plasma. Standard binary mixtures of CBZ and PHT have been resolved by application of PLS-1 to their UV spectra. Then, the binary standard solutions, spiked to plasma, were prepared and after the extraction of the drugs, their corresponding UV spectrum were analyzed by PLS regression to calculate the concentration of drugs in unknown plasma. A leave one out cross-validation procedure was employed to find the optimum numbers of latent variables using PRESS. A HPLC method was also applied for simultaneous determination of two drugs in the plasma and in methanol. The mean recoveries obtained by PLS were 98.4 and 98.2 for CBZ and PHT and those obtained by HPLC were 100.1 and 101.7, respectively. Although, the HPLC method showed better performance than PLS, it was found that the results obtained by PLS were comparable with those obtained by HPLC method.     

Synthesis and characterization of a compact tricyclic resorcinol from (+)- and (−)-3-pinanol

Resorcinol derivatives are important building blocks in the synthesis of natural products and pharmaceutical compounds including cannabinoids. Here we describe the synthesis and the structural characterization of a key resorcinol which carries a fully restricted bridged bicyclic group. We also report a potential mechanism for the acid catalyzed condensation of (+)- or (−)-3-pinanol with 2,6-dimethoxyphenol. The synthesized resorcinol facilitates the development of novel conformationally restricted cannabinoid analogs.     

基于超高效液相色谱-质谱联用技术对大麻植物中3种成分及化学表型分析

建立了超高效液相色谱-质谱联用(UPLC/PDA-QDa)同时对大麻植物中Δ9-四氢大麻酚(Δ9-THC)、大麻酚(CBN)和大麻二酚(CBD)进行定性与定量分析的方法.缴获的大麻植物用甲醇超声萃取, 采用甲醇(含0.1%甲酸)和超纯水为流动相, 等度洗脱, 流速为0.2 mL/min, 经Waters UPLC BEH C18柱(50 mm×2.1 mm, 1.7 μm)分离, 利用光电二极管阵列检测器(PDA)在220 nm波长下检测, 并通过质谱检测器(QDa)对目标洗脱峰进行追踪确证.在0.5~20 μg/mL浓度范围内, 3种大麻酚类化合物的质量浓度与峰面积呈良好的线性关系, R≥0.999;低、中、高添加水平的平均回收率为82%~102%, 相对标准偏差(RSD)在0.4%~4.1%之间.本方法稳定、简便、灵敏, 能够满足检测需求.根据Δ9-THC、(Δ9-THC+CBN)/CBD、Δ9-THC/CBD或CBN/CBD表型指数, 区分不同产地大麻的化学表型, 为大麻植物的检测分析和质量控制提供了有效手段.