A Schiff base fluorescence probe for highly selective turn-on recognition of Zn2+

A simple Schiff base CTS, synthesized between 2-hydroxy-1-naphthaldehyde and 2-benzylthio-ethanamine, was found to be a good turn-on fluorescence probe for the detection of Zn²⁺, due to the restriction of the rotation of the bond between CN and naphthalene ring and/or the blocking of the photo-induced electron transfer (PET) mechanism of the nitrogen atom to naphthalene ring. Excellent selectivity for Zn²⁺ was evidenced, over many other competing ions, including Fe³⁺, Cr³⁺, Ni²⁺, Co²⁺, Fe²⁺,Mn²⁺, Ca²⁺, Hg²⁺, Pb²⁺, Cu²⁺, Mg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Li⁺, K⁺, and Na⁺, in EtOH/HEPES buffer (95:5, v/v, pH = 7.4). It was noteworthy that Cd²⁺ had no interference with Zn²⁺. The stoichiometric complex of CTS-Zn²⁺ was determined to be 2:1 for CTS and Zn²⁺ in molar, based on the Job plot and single crystal X-ray diffraction data. The binding constant of the complex was 85.7 M^?2 with a detection limit of 5.03 × 10^?7 M. The fluorescence bio-imaging capability of CTS to detect Zn²⁺ in live cells was also studied. These results indicated that CTS could serve as a favorable probe for Zn²⁺.     

Coumarin-based fluorescent chemosensor for the selective quantification of Zn2+ and AcO− in an aqueous solution and living cells

In this work, we report a novel fluorescence chemosensor HM based on the coumarin fluorophore for the quantification of Zn²⁺ and AcO^?. HM specifically binds to Zn²⁺ in the presence of other competing cations, and evident changes in UV–vis and fluorescence spectra in HEPES buffer are noticed. The in situ generated HM-Zn²⁺ complex solution exhibit a high selectivity toward AcO^? via Zn²⁺ displacement approach. The detection limits of HM for Zn²⁺ and HM-Zn²⁺ for AcO^? were estimated to be 7.24 × 10^?8 M and 9.41 × 10^?8 M, respectively. HM and the resultant complex HM-Zn²⁺ exhibit low cytotoxicity and cell-membrane permeability, which makes them capable of Zn²⁺ and AcO^? imaging in living Hep G2 cells. A B3LYP/6-31G(d,p) basis set was employed for optimization of HM and HM-Zn²⁺ complex.     

Syntheses and structures of tetranuclear Zn（Ⅱ） complexes with in situ generated macrocyclic Schiff base ligands:Applications in Zn2+ sensing

Three novel Zn（II） complexes,[Zn₄L¹Cl₄]-3H₂O（1）,[Zn₄L²Cl₄]-2DMF（2） and[Zn₄L³Cl₄]H₂O（3）,have been synthesized and structurally characterized.In these complexes,interesting 32-membered dodecadentate macrocyclic ligands were generated in situ by ’2 + 2’ type condensation reactions between a tetraamine and various dialdehydes.All the complexes are isostructurally tetranuclear Zn（Ⅱ） complexes,containing endogenous alkoxo and phenoxo bridges.Applications of the macrocyclic ligands as Zn²⁺ sensors have been investigated.Take H₄L¹ for example,it exhibits a 4-fold fluorescence enhancement upon the addition of 2 equiv.of Zn²⁺ in MeOH.     

A sensitive tetraphenylethene-based fluorescent probe for Zn2+ ion involving ESIPT and CHEF processes

A new tetraphenylethene-based fluorescent probe 2-(quinolin-8-yliminomethyl)-4-triphenylvinyl-phenol (HL) for detecting Zn²⁺ ion through the excited state intramolecular proton transfer (ESIPT) and chelation enhanced fluorescence (CHEF) processes has been designed and synthesized. The results show that HL emits relatively strong blue fluorescence at 460 nm without Zn²⁺ ion, however, probe HL displays highly pink fluorescent emission at 600 nm when adding Zn²⁺ ion. The fluorescent emission of HL appears an extremely large Stokes shift, which effectively reduces the interference of background signal. The limit of detection of HL for Zn²⁺ ion can reach to 9.0 × 10^–8 M.     

A novel highly selective ratiometric fluorescent sensor for relay recognition of Zn2+ and H2PO4−

A novel fluorescent sensor (AQTF1) based on the N-(quinolin-8-yl) tetrahydrofuran-2-carboxamide was designed and synthesized. This new sensor demonstrated high selectivity for the Zn²⁺ without the interference from Cd²⁺. The detection limit of this probe was calculated to be 10.8 nM for Zn²⁺. The in situ prepared AQTF1-Zn²⁺ complex was used for detection of H₂PO₄^? and displayed good selectivity from the common anions. Furthermore, the AQTF1 displayed good ratiometric response for the relay recognition for Zn²⁺ and H₂PO₄^?.     

A fast,highly selective and sensitive dansyl-based fluorescent sensor for copper (II) ions and its imaging application in living cells

Since the copper ions (Cu²⁺) play a fatal role in many foundational physiological processes, it is important to develop a simple, highly sensitive and selective sensor for Cu²⁺ detection in living systems. Herein, an intramolecular charge transfer (ICT) and dansyl-based fluorescent chemosensor 1 was designed, synthesized and characterized for the sensitive and selective quantification of Cu²⁺. It exhibited remarkable fluorescence quenching upon addition of Cu²⁺ over other selected metal ions, attributed to the complex formation between 1 and Cu²⁺ with the association constant 6.7 × 10⁵ M^?1. The sensor 1 showed a fast and linear response towards Cu²⁺ in the concentration range from 0 to 12.5 × 10^?6 mol L^?1 with the detection limit of 2.5 × 10^?7 mol L^?1. This detection could be carried out in a wide pH range of 5.0–14. Furthermore, sensor 1 can be used for detecting Cu²⁺ in living cells.     

Improvement in performance of a flow electrochemical sensor by using carbamoyl-arms polyazamacrocycle for the preconcentration of lead ions onto the electrode

A flow electrochemical sensor for trace analysis of lead, using TETRAM-modified graphite felt electrode is reported here. TETRAM ligands are covalently immobilized on the graphite felt by chemical reactions on amino acid linkers, previously attached to the electrode by an electrochemical process. The detection is performed in two steps: the preconcentration of Pb²⁺ ions by complexation with immobilized TETRAM and the analysis by linear sweep stripping voltammetry. A calibration curve typical of at least two equilibrium processes is obtained. A limit of detection of 2.5 × 10^?8 mol L^?1 is reached for a total analysis time of 35 min. Interestingly, the flow sensor shows a good selectivity toward lead in presence of Cu²⁺, Cd²⁺, Ni²⁺, Zn²⁺ and Co²⁺ ions. This new sensor exhibits improved sensitivity and selectivity compared to the previously reported sensor using cyclam-modified electrode. It is stable after three uses, using strong acidic medium for the regeneration step.     

A novel fluorescence sensor for K+ based on bis-Bodipy: The ACQ effect controlled by cation complexation of pseudo crown ether ring

Three novel bis-Bodipy 3a–3c bridged with crown ether chain were prepared in yields of 70–78%. Their complexation absorption and fluorescent spectra for fourteen metal ions suggested that compound 3b exhibited the selective response for K⁺ with obvious ACQ effect. The association constant of compound 3b with K⁺ was 4.3 × 10⁵ M^?1 and 1:1 complex mode was deduced. The complexation mechanism of ACQ effect controlled by cation complexation of pseudo crown ether ring was confirmed by the fluorescent titrations, complexation FT-IR spectra, complexation ¹H NMR spectra, complexation ESI-MS spectra and contrast experiment of similar mono-Bodipy derivative. The K⁺ was binded in the cavity of a pseudo crown ether ring, leading to the closed distance for two Bodipy units and then enhancing the ACQ effect obviously. Both the structure of the crown ether chain and two Bodipy units were decisive factors for the selective fluorescence sensor for K⁺.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

A novel colorimetric chemosensor based on quinoline for the sequential detection of Fe3+ and PPi in aqueous solution

A novel quinoline-functionalized Schiff-base derivative PY was designed and synthesized. Sensor PY displayed highly selective and sensitive fluorescence enhancement and naked-eye color change to Fe³⁺ in the presence of other competing cations. The mechanisms have been supported by Job’s plot evaluation, FT-MS and theoretical calculations. The in situ generated PY-Fe³⁺ complex solution exhibited a high selectivity toward PPi via Fe³⁺ displacement approach. The detection limits of sensor PY to Fe³⁺ and PY-Fe³⁺ complex to PPi were estimated to be 4.24 × 10^?8 M and 8.18 × 10^?8 M, respectively. This successive recognition feature of sensor PY makes it has a potential utility for Fe³⁺ and PPi detection in aqueous solution. A B3LYP/6-31G(d,p) basis set was employed for optimization of PY and PY-Fe³⁺ complex.     

A voltammetric sensor for simultaneous determination of lead,cadmium and zinc on an activated carbon fiber rod

A simple, low cost and sensitive voltammetric sensor was developed for the simultaneous detection of Pb²⁺, Cd²⁺, and Zn²⁺ based on a disposable carbon fiber rod (CFR). The important factors to enhance the sensing property were creation of a clean surface by dealing with CFR at a high potential and electrochemical deposition of Bi film to improve the accumulation of heavy metal ions.     

Chromophoric thin film based on cellulose triacetate blends for sensing metal ions

Chromophoric sensors were made based on 8-hydroxyquinoline immobilized onto a thin film of a polymer blend matrix. The thin films were made by the solution casting method using cellulose triacetate and polyethylene glycol (PEG 600) as plasticizer and pore-forming agent. Different contents of PEG 600 additive were investigated. The prepared films were characterized by FTIR and thermal analysis. The absorption and fluorescence spectra of different films were dependent on the content of PEG 600 with clear quenching of the fluorescence of the film that contains PEG 600 compared to that with zero content. This behavior was attributed to the collective effect of hydrogen bonding (intra- and intermolecular hydrogen bonding) that enhances the process of excited-state proton transfer. This result is favorable to a responsive sensor that shows fluorescence off in the absence of metal ions and fluorescence on upon metal ion chelation. The detection of 5 × 10⁻⁵ M of Al³⁺, Zn²⁺ and thallium (I) in aqueous solution has been observed with the fluorescence method. The result obtained is consistent with the enhancing effect of PEG 600 in the detectability of metal ions. Compared with the detection of Al³⁺ and Zn²⁺, the sensor shows better detection of thallium (I), with clear fluorescence spectra.     

A highly selective fluorescence turn-on detection of Al3+ and Ca2+ based on a coumarin-modified rhodamine derivative

A fluorescent chemosensor 1 was synthesized containing a coumarin moiety bound to rhodamine B hydrazide. Compound 1 displayed different fluorescence emission responses to Al³⁺ and Ca²⁺ ions with high quantum yields (0.64 and 0.15, respectively) and low detection limits (3.0 × 10^–8 and 9.4 × 10^–8 M, respectively). The possible binding modes of compound 1 with Al³⁺ and Ca²⁺ ion were calculated using a Job plot, HRMS, ¹H NMR spectroscopic titration and IR spectroscopy. Moreover, the calcium in 1-Ca²⁺ could be displaced by Al³⁺ ions, resulting in another ratiometric sensing signal output, which indicates that 1-Ca²⁺ could detect Al³⁺ ions in a ratiometric way. Bioimaging results also demonstrated that compound 1 could act as an intracellular Al³⁺ ion imaging sensor.     

A simple highly sensitive and selective turn-on fluorescent chemosensor for the recognition of Pb2+

A simple highly sensitive and selective turn-on fluorescent chemosensor L based on bis-Schiff-base for Pb²⁺ ions was synthesized and characterized by spectroscopic techniques. L having high binding affinity towards Pb²⁺ ions of 2.10 × 10⁴ M^?1 selectively detects Pb²⁺ ions with almost no interference among various competitive ions by a 11-fold fluorescent enhancement in CH₃CN/H₂O (95:5, v/v) solution over a wide pH range. Moreover, sensor L displayed a lower detection limit of 3.80 × 10^?7 M, which is low enough for sensing sub-millimolar concentration of Pb²⁺ encountered practically.     

A lysosomal targeting fluorescent probe and its zinc imaging in SH-SY5Y human neuroblastoma cells

A fluorescent probe based PET mechanism was designed, and the probe could image endogenous release of Zn²⁺ upon H₂O₂ stimulation in SH-SY5Y cells.     

Synthesis and evaluation of two novel rhodamine-based fluorescence probes for specific recognition of Fec+ ion

Two low cytotoxic fluorescence probes Rb1 and Rb2 detecting Fe³⁺ were synthesized and evaluated. Rb1 and Rb2 exhibited an excellent selectivity to Fe³⁺, which was not disturbed by Ag⁺, Li⁺, K⁺, Na⁺, NH₄⁺, Fe²⁺, Pb²⁺, Ba²⁺, Cd²⁺, Ni²⁺, Co²⁺, Mn²⁺, Zn²⁺, Mg²⁺, Hg²⁺, Ca²⁺, Cu²⁺, Ce³⁺, AcO^?, Br^?, Cl^?, HPO₄^2?, HSO₃^?, I^?, NO₃^?, S₂O₃^2?, SO₃^2? and SO₄^2? ions. The detection limits were 1.87 × 10^?7 M for Rb1 and 5.60 × 10^?7 M for Rb2, respectively. 1:1 stoichiometry and 1:2 stoichiometry were the most likely recognition mode of Rb1 or Rb2 towards Fe³⁺, and the corresponding OFF–ON fluorescence mechanisms of Rb1 and Rb2 were proposed.     

Spectroscopy,thermal and structural studies of new ZnII coordination polymer, [Zn3(μ-bpa)4.5(AcO)3](ClO4)3·4.26H2O

Three Zn^II coordination polymers with acetate and perchlorate anions, [Zn₃(μ-bpa)_4.5(AcO)₃](ClO₄)₃·4.26H₂O (1), [Zn₂(μ-bpe)₃(AcO)₂](ClO₄)₂ (2) and [Zn₂(bpe)(AcO)₄] (3), bpa = 1,2-bis(4-pyridyl)ethane and bpe = 1,2-bis(4-pyridyl)ethene, have been synthesized and characterized by elemental analysis, IR, ¹H NMR, and ¹³C NMR spectroscopies, and the structure of compound 1 was determined by single-crystal X-ray diffraction. The thermal stabilities of compounds 1–3 were studied by thermal gravimetric (TG) and differential thermal analyses (DTA). The structural studies of compound 1 show that the structure may be considered as a three-dimensional coordination polymer of zinc(II) with large voids filled with disordered water molecules. The stability of the porous networks after removal of the guest water molecules is confirmed by X-ray powder diffraction.     

A highly selective colorimetric and fluorescent chemosensor for Cr2+ in aqueous solutions

A new rhodamine-based chemosensor was synthetized through a modified copper-catalyzed [3+2]-cycloaddition of an azidocoumarin with an alkynyl-rhodamine. Its sensing properties toward various metal cations in aqueous solutions were investigated by colorimetric changes, UV–vis and fluorescence spectroscopies. The sensor exhibited a high selectivity for Cr²⁺ over Cr³⁺ and other divalent cations such as Cu²⁺, Mg²⁺, Zn²⁺, Ca²⁺, Cd²⁺, Co²⁺, Hg²⁺ and Ni²⁺. The linear range of detection by fluorescence spectroscopy is 0.07–3.5 mM, with a detection limit of ca. 64 μM. The binding mode of Cr²⁺ with the sensor was rationalized through experimental evidences.     

A pyrene-based dual chemosensor for colorimetric detection of Cu2+ and fluorescent detection of Fe3+

A pyrene based chemosensor was designed and synthesized. The pyrene fluorophore was connected with a pyridine unit through a Schiff base structure to give the sensor (L). L was tested with a variety of metal ions and exhibited high colorimetric selectivities for Cu²⁺ and Fe³⁺ over other ions. Upon binding with Cu²⁺ or Fe³⁺, L showed an obvious optical color change from colorless to pink for Cu²⁺ or orange for Fe³⁺ over a wide pH range from 3 to 12. Moreover, the fluorescence of L at 370 nm decreased sharply after bonding with Fe³⁺, while other metal ions including Cu²⁺ had no apparent interference. Thus, using such single chemosensor, Cu²⁺ and Fe³⁺ can be detected independently with high selectivity and sensitivity. The limits of detection toward Cu²⁺ and Fe³⁺ were 8.5 and 2.0 μM, respectively. DFT calculation results also proved the formation of stable coordination complexes and the phenomenon of fluorescence quenching by Fe³⁺. Furthermore, L was also successfully used as a bioimaging reagent for detection of Fe³⁺ in living cells.     

Synthesis,characterization and fluorescence properties of hexanuclear zinc(II) complexes

Two hexanuclear zinc(II) complexes, [Zn₆(L¹)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · CH₃CN (1 · CH₃CN) and [Zn₆(L²)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · 4CH₃CN (2 · 4CH₃CN), where HL¹ = 4-methyl-2,6-bis(cyclohexylmethyliminomethyl)-phenol and HL² = 4-methyl-2,6-bis(1-naphthalylmethyliminomethyl)-phenol, have been synthesized and characterized by elemental analysis, FT-IR and fluorescence spectroscopic methods, and by X-ray diffraction analysis. In the asymmetric unit of complex 1, two of the three zinc atoms have pentacoordinate geometries and the other is tetrahedrally coordinated, whereas the three distinct Zn atoms in complex 2 adopt three different coordination environments, namely distorted octahedral, trigonal bipyramidal and tetrahedral. The fluorescence properties of the ligands and complexes have been investigated.