Electrochemistry and electroanalytical applications of carbon nanotubes: a review.

This review addresses recent developments in electrochemistry and electroanalytical chemistry of carbon nanotubes (CNTs). CNTs have been proved to possess unique electronic, chemical and structural features that make them very attractive for electrochemical studies and electrochemical applications. For example, the structural and electronic properties of the CNTs endow them with distinct electrocatalytic activities and capabilities for facilitating direct electrochemistry of proteins and enzymes from other kinds of carbon materials. These striking electrochemical properties of the CNTs pave the way to CNT-based bioelectrochemistry and to bioelectronic nanodevices, such as electrochemical sensors and biosensors. The electrochemistry and bioelectrochemistry of the CNTs are summarized and discussed, along with some common methods for CNT electrode preparation and some recent advances in the rational functionalization of the CNTs for electroanalytical applications.     

Electrochemistry of polystyrene intercalated vertically aligned single- and double-walled carbon nanotubes on gold electrodes

Electrochemical electrodes incorporating double- and single-walled carbon nanotubes (CNTs) were fabricated on cysteamine modified flat gold substrates. Through covalent coupling of the amine end groups with carboxyl functionalized CNTs, a dense forest of vertically aligned CNTs was produced. To these a 30 nm thick insulating polystyrene layer was spin coated, resulting in exposure of the uppermost carbon nanotube ends. The electrochemical performance of each electrode was then determined using the redox probe ruthenium hexaamine. Once surrounded by polymer, the double-walled CNTs (DWCNTs) showed an improved electron transfer rate, compared to the single-walled electrode. This improvement was attributed to the protection of the electronic properties of the inner wall of the DWCNT during the chemical modification and suggests that DWCNTs may offer a useful alternative to SWCNTs in future electrochemical sensors and biosensors.     

A Review on the Effects of Introducing CNTs in the Modification Process of Electrochemical Sensors

This review summarizes some developments in the fabrication of modified sensors and biosensors through the incorporating the carbon nanotubes (CNTs) in their modification ingredients. A large number of papers have paid attention towards the application of carbon nanotubes (CNTs) as electrode constituents and studied its electrochemical behavior. Here, we survey the achievements in the detection of various substances with high selectivity and sensitivity provided using CNTs based electrodes. Moreover, modified electrodes by CNTs have demonstrated the electrocatalytic features and higher sensitivity in detection of analytes. The improved characteristics arises from the large surface area and good conductivity of CNTs. However, it should be considered that the use of single walled carbon nanotubes (SWCNTs) or multi‐walled carbon nanotubes (MWCNTs), the presence of impurities, and the chemical procedures adopted are effective on the performance of the modified sensors.     

Layer-by-layer fabrication and characterization of DNA-wrapped single-walled carbon nanotube particles

Carbon nanotubes have been proposed as support materials for numerous applications, including the development of DNA sensors. One of the challenges is the immobilization of DNA or other biological molecules on the sidewall of carbon nanotubes. This paper introduces a new fabrication of DNA-carbon nanotubes particles using the layer-by-layer (LBL) technique on single-walled carbon nanotubes (SWCNTs). Poly(diallyldimethylammonium) (PDDA), a positively charged polyelectrolyte, and DNA as a negatively charged counterpart macromolecule are alternatively deposited on the water-soluble oxidized SWCNTs. Pure DNA/PDDA/SWCNTs particles can be prepared and separated by simple unltracentrifugation. The characterization of DNA/PDDA/SWCNTs particles was carried out by scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy, Raman spectroscopy, and thermogravimetric analysis (TGA). An electrode modified by the DNA/PDDA/SWCNTs particles shows a dramatic change of the electrochemical signal in solutions of tris(2,2'-bipyridyl)ruthenium(II) ((Ru(bpy)(3)2+) as a reporting redox probe. A preliminary application of the DNA-modified carbon nanotubes in the development of DNA sensors used in the investigation of DNA damage by nitric oxide is presented.     

Carbon Nanotube and Gold‐Based Materials: A Symbiosis

Carbon nanotubes constitute a novel class of nanomaterials with potential applications in many areas. The attachment of metal nanoparticles to carbon nanotubes is new way to obtain novel hybrid materials with interesting properties for various applications such as catalysts and gas sensors as well as electronic and magnetic devices. Their unique properties such as excellent electronic properties, a good chemical stability, and a large surface area make carbon nanotubes very useful as a support for gold nanoparticles in many potential applications, ranging from advanced catalytic systems through very sensitive electrochemical sensors and biosensors to highly efficient fuel cells. Here we give an overview on the recent progress in this area by exploring the various synthesis approaches and types of assemblies, in which nanotubes can be decorated with gold nanoparticles and explore the diverse applications of the resulting composites.     

Role of carbon nanotubes in electroanalytical chemistry: a review

This review covers recent advances in the development of new designs of electrochemical sensors and biosensors that make use of electrode surfaces modification with carbon nanotubes. Applications based on carbon nanotubes-driven electrocatalytic effects, and the construction and analytical usefulness of new hybrid materials with polymers or other nanomaterials will be treated. Moreover, electrochemical detection using carbon nanotubes-modified electrodes as detecting systems in separation techniques such as high performance liquid chromatography (HPLC) or capillary electrophoresis (CE) will be also considered. Finally, the preparation of electrochemical biosensors, including enzyme electrodes, immunosensors and DNA biosensors, in which carbon nanotubes play a significant role in their sensing performance will be separately considered.     

Selective polycarboxylation of semiconducting single-walled carbon nanotubes by reductive sidewall functionalization

The efficient and controllable synthesis, the detailed characterization, and the chemical postfunctionalization of polycarboxylated single-walled carbon nanotubes SWCNT(COOH)(n) are reported. This innovative covalent sidewall functionalization method is characterized by (a) the preservation of the integrity of the entire σ-framework of SWCNTs; (b) the possibility of achieving very high degrees of addition; (c) control of the functionalization degrees by the variation of the reaction conditions (reaction time, ultrasonic treatment, pressure); (d) the identification of conditions for the selective functionalization of semiconducting carbon nanotubes, leaving unfunctionalized metallic tubes behind; (e) the proof that the introduced carboxylic acid functionalities can serve as versatile anchor points for the coupling to functional molecules; and (f) the application of a subsequent thermal degradation step of the functionalized semiconducting tubes leaving behind intact metallic SWCNTs. Functional derivatives have been characterized in detail by means of Raman, UV-vis/nIR, IR, and fluorescence spectroscopy as well as by thermogravimetric analysis combined with mass spectrometry, atomic force microscopy, and zeta-potential measurements.     

Carbon nanofiber vs. carbon microparticles as modifiers of glassy carbon and gold electrodes applied in electrochemical sensing of NADH

Carbon materials (CMs), such as carbon nanotubes (CNTs), carbon nanofibers (CNFs), and carbon microparticles (CMPs) are used as doping materials for electrochemical sensors. The efficiency of these materials (either before or after acidic treatments) while being used as electrocatalysts in electrochemical sensors is discussed for β-nicotinamide adenine dinucleotide (NADH) detection using cyclic voltammetry (CV). The sensitivity of the electrodes (glassy carbon (GC) and gold (Au)) modified with both treated and untreated materials have been deeply studied. The response efficiencies of the GC and Au electrodes modified with CNF and CMP, using dimethylformamide (DMF) as dispersing agent are significantly different due to the peculiar physical and chemical characteristics of each doping material. Several differences between the electrocatalytic activities of CMs modified electrodes upon NADH oxidation have been observed. The CNF film promotes better the electron transfer of NADH minimizing the oxidation potential at +0.352 V. Moreover higher currents for the NADH oxidation peak have been observed for these electrodes. The shown differences in the electrochemical reactivities of CNF and CMP modified electrodes should be with interest for future applications in biosensors.     

Carbon nanostructured materials for applications in nano-medicine, cultural heritage, and electrochemical biosensors

This review covers applications of pristine and functionalized single-wall carbon nanotubes (SWCNTs) in nano-medicine, cultural heritage, and biosensors. The physicochemical properties of these engineered nanoparticles are similar to those of ultrafine components of airborne pollution (UF) and might have similar adverse effects. UF may impair cardiovascular autonomic control (inducing a high-risk condition for adverse cardiovascular effects), cause mammalian embryo toxicity, and increase geno-cytotoxic risk. SWCNTs coated with a biopolymer, for example polyethylenimine (PEI), become extremely biocompatible, hence are useful for in-vivo and in-vitro drug delivery and gene transfection. It is also possible to successfully immobilize a human enteric virus on PEI/SWCNT composites, suggesting application as a carrier in non-permissive media. The effectiveness of carbon nanostructured materials in the cleaning, restoration, and consolidation of deteriorated historical surfaces has been widely shown by the use of carbon nanomicelles to remove black dendritic crust from stone surfaces. The nanomicelles, here, have the twofold role of delivery and controlled release of the cleaning agents. The high biocompatibility of functionalized SWCNTs with enzymes and proteins is a fundamental feature used in the assembly of electrochemical biosensors. In particular, a third-generation protoporphyrin IX-based biosensor has been assembled for amperometric detection of nitrite, an environmental pollutant involved in the biodeterioration and black encrustation of historical surfaces.     

Functionalized carbon nanotubes and nanofibers for biosensing applications

This review summarizes recent advances in electrochemical biosensors based on carbon nanotubes (CNTs) and carbon nanofibers (CNFs) with an emphasis on applications of CNTs. CNTs and CNFs have unique electric, electrocatalytic and mechanical properties, which make them efficient materials for developing electrochemical biosensors.We discuss functionalizing CNTs for biosensors. We review electrochemical biosensors based on CNTs and their various applications (e.g., measurement of small biological molecules and environmental pollutants, detection of DNA, and immunosensing of disease biomarkers). Moreover, we outline the development of electrochemical biosensors based on CNFs and their applications. Finally, we discuss some future applications of CNTs.     

Efficient Chemical Modification of Carbon Nanotubes with Metallacarboranes

As‐produced single‐walled carbon nanotubes (SWCNTs) tend to aggregate in bundles due to π–π interactions. Several approaches are nowadays available to debundle, at least partially, the nanotubes through surface modification by both covalent and noncovalent approaches. Herein, we explore different strategies to afford an efficient covalent functionalization of SWCNTs with cobaltabisdicarbollide anions. Aberration‐corrected HRTEM analysis reveals the presence of metallacarboranes along the walls of the SWCNTs. This new family of materials presents an outstanding water dispersibility that facilitates its processability for potential applications.     

Functionalization of Single‐Walled Carbon Nanotubes

Through chemical functionalization of single‐walled carbon nanotubes, the prerequisites for possible applications of such nanostructures are established. The derivatized tubes differ from the crude materials in their good solubility, which enables both a more extensive characterization and subsequent chemical reactivity. Current derivatization methods include defect and covalent sidewall functionalization, as well as noncovalent exo‐ and endohedral functionalization. In this way, for example, a range of nanotubes can be prepared: with sidewall substituents, wrapped with polymers, or with guest molecules included. The current state of the literature is presented in this Minireview.     

Amperometric Glucose Biosensors Based on Glassy Carbon and SWCNT‐Modified Glassy Carbon Electrodes

Different carbonaceous materials, such as single‐walled carbon nanotubes (SWCNTs) and glassy carbon submitted to an electrochemical activation at +1.80 V (vs. SCE) for 900 s, have been used with the aim of comparing their performances in the development of enzyme electrodes. Commercial SWCNTs have been pretreated with 2.2 M HNO₃ for 20 h prior to use. The utility of activated GC as promising material for amperometric oxidase‐based biosensors has been confirmed. With glucose oxidase (GOx) as a model enzyme, glucose was efficiently detected up to 1 mM without the use of a mediator. Both electrodes operated in stirred solutions of 0.1 M phosphate buffer (pH 5.5), containing dissolved oxygen, at a potential of ?0.40 V vs. SCE. Although the performances of the two carbonaceous materials were comparable, the biosensors based on activated GC were characterized by a practically unchanged response 40 days after the fabrication, a better signal to noise ratio, and a little worse sensitivity. In addition, the preparation procedure of such biosensors was more simple, rapid and reproducible.     

Residual Metal Impurity Aids Facile In Situ Electrochemical Surface Derivatization of Single‐Walled Carbon Nanotubes

Residual metal impurities were exploited as reactants in the functionalization of the surface of single‐walled carbon nanotubes (SWCNT) with nickel hexacyanoferrate (NiHCF) by simple electrochemical cycling in ferricyanide solutions. This facile in situ electrochemical modification process provides intimate contact between NiHCF and SWCNTs that improves the stability of the redox property and reactivity of NiHCF. The characteristic redox behavior of NiHCF on SWCNT surfaces can be used as an electrochemical probe to access qualitative and quantitative information on unknown electroactive metal impurities in SWCNTs. Significantly, the NiHCF‐modified SWCNTs exhibit pseudocapacitive behavior, and the calculated specific capacitances are 710 and 36 F g^?1 for NiHCF‐SWCNTs and SWCNTs respectively. Furthermore, NiHCF‐SWCNTs were transformed into Ni(OH)₂/SWCNTs and used for enzymeless glucose oxidation.     

Electrochemical Sensors Based on Carbon Nanotubes

Carbon nanotubes are attractive new materials. It has been about a decade since carbon nanotubes were discovered. Carbon nanotubes have many outstanding properties and have many practical or potential applications. In this short review we introduce recent advances in carbon nanotubes as potential material for electrochemical sensors. The advantages of carbon nanotubes as sensors are discussed along with future prospects.     

Multipurpose Nature of Rapid Covalent Functionalization on Carbon Nanotubes

In the vast field of functionalization routes to carbon nanoforms, the fulfillment of such critical requirements as quick and nonharsh methods, good dispersibility, introduction of reactive groups, short reaction time, and low cost can be quite challenging. Traditional thermally induced diazonium chemistry on single‐walled carbon nanotubes (SWCNTs) is revisited by using commercial anilines and providing useful insight into the versatility of this approach. Functionalized SWCNTs with multiple controllable features, such as degree (and ratio) of coverage, orthogonalization, doping, and high water dispersibility, are obtained by introducing benzenesulfonic acid and benzylamine moieties. The scenario opens up an avenue to address relevant applications in which most functionalization methods could not be applied in a straightforward way.     

Direct attachment of well-aligned single-walled carbon nanotube architectures to silicon (100) surfaces: a simple approach for device assembly

A new approach for the attachment of vertically-aligned shortened carbon nanotube architectures to a silicon (100) substrate by chemical anchoring directly to the surface has been demonstrated for the first time. The ordered assembly of single-walled carbon nanotubes (SWCNTs) was accomplished by hydroxylating the silicon surface followed by a condensation reaction with carboxylic acid functionalised SWCNTs. This new nanostructure has been characterised by X-ray photoelectron, Raman and Fourier transform infrared (FTIR) spectroscopy as well as scanning electron and atomic force microscopy. The assembly behaviour of SWCNTs onto the silicon surface shows a fast initial step producing isolated functionalised carbon nanotubes or nanotube bundles anchored to the silicon surface followed by a slower step where the adsorbed nanotubes grow into larger aggregates via van der Waals interactions between adsorbed and solvated nanotubes. The electrochemical and optical properties of the SWCNTs directly attached to silicon have also been investigated. These new nanostructures are excellent electrochemical electrodes. They also fluoresce in the wavelength range 650-800 nm. The successful attachment of the SWCNTs directly to silicon provides a simple, new avenue for fabrication and development of silicon-based nanoelectronic, nano-optoelectronic and sensing devices. Compared to existing techniques, this new approach has several advantages including low operating temperature, low cost and the possibility of further modification.     

Azide-functionalization of carbon nanotubes by electrochemical oxidation of N3- in situ

Azide-functionalization of single-walled carbon nanotubes （SWCNTs） was achieved by electrochemical oxidation of N3 in situ. The functionalized nanotubes were characterized in details by single internal reflection infrared spectroscopy （ATR-FTIR） and thermogravimetic analysis （TGA/MS）. The results revealed that a covalent C-N bond had formed and this might provide an effective method for the preparation of azide-functionalized materials, especially carbon materials. The degree of functionaliza- tion was measured by X-ray photoelectron spectroscopy （XPS）.