Structural and catalytic studies of lithium complexes bearing pendant aminophenolate ligands

Lithium complexes bearing mono-anionic aminophenolate ligands are described. Reactions of ligand precursors HON(Me)Ph(OMe), HON(Me)Ph(SMe), HON(Me)C(OMe) or HON(Me)C(NMe2) [HON(Me)Ph(OMe) = (2-OMeC6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)Ph(SMe)= (2-SMe-C6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(OMe) = (MeOCH(2)CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(NMe2) = (Me2NCH2CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2)] with 1.1-1.3 molar equivalents of (n)BuLi in diethyl ether solution afford (LiON(Me)Ph(OMe))(2) (3), (LiON(Me)Ph(SMe))2 (4), (LiON(Me)C(OMe))2 (5) and (LiON(Me)C(NMe2))2 (6) as dinuclear lithium complexes. The BnOH adduct of , (BnOH)(LiON(Me)C(OMe)) (7), was prepared from the reaction of and BnOH in diethyl ether solution. The molecular structures are reported for ligand precursor HON(Me)Ph(SMe) and compounds 3-5 and 7. These dinuclear lithium complexes show excellent catalytic activities toward the ring-opening polymerization of L-lactide in the presence of benzyl alcohol.     

Synthesis and structures of crystalline Li, Al and Sn(II) 1-azaallyls and beta-diketiminates derived from [Li{mu,eta3-N(SiMe3)C(Ad)C(H)SiMe3}]2 (Ad = 1-adamantyl)

The crystalline dimeric 1-azaallyllithium complex [Li{mu,eta(3-N(SiMe3)C(Ad)C(H)SiMe3}]2 (1) was prepared from equivalent portions of Li[CH(SiMe3)2] and 1-cyanoadamantane (AdCN). Complex was used as precursor to each of the crystalline complexes 2-8 which were obtained in good yield. By 1-azaallyl ligand transfer, 1 afforded (i) [Al{eta3-N(SiMe3)C(Ad)C(H)SiMe3}{kappa1-N(SiMe3)C(Ad)=C(H)SiMe3-E}Me] (5) with [AlCl2Me](2), (ii) [Sn{eta3-N(SiMe3)C(Ad)C(H)SiMe3}2] (7) with Sn[N(SiMe3)2]2, and (iii) [Li(N{C(Ad)=C(H)SiMe3-E}{Si(NN)SiMe3})(thf)2] (8) with the silylene Si[(NCH(2)Bu(t))2C6H(4)-1,2] [= Si(NN)]. By insertion into the C[triple bond, length as m-dash]N bond of the appropriate cyanoarene RCN, gave the beta-diketiminate [Li{mu-N(SiMe3)C(Ad)C(H)C(R)NSiMe3}]2 [R = Ph (2), C(6)H(4)Me-4 (3)], and yielded [Al{kappa2-N(SiMe3)C(Ad)C(H)C(Ph)NSiMe3}{kappa1-N(SiMe3)C(Ad)=C(H)SiMe3-E}Me] (6). The beta-diketiminate [Al{kappa2-N(SiMe3)C(Ad)C(H)C(Ph)NSiMe3}Me2] (4) was prepared from 2 and [AlClMe2]2. The X-ray structures of 1 and 3-8 are presented. Multinuclear NMR spectra in C6D6 or C6D5CD3 have been recorded for each of 1-8; such data on 8 revealed that in solution two minor isomers were also present.     

Synthesis, structural characterization, reactivity, and thermal stability of [eta(5):sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2)

Reaction of [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]TiCl(NMe2) (1) with 1 equiv of PhCH2K, MeMgBr, or Me3SiCH2Li gave corresponding organotitanium alkyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2) (R = CH2Ph (2), CH2SiMe3 (4), or Me (5)) in good yields. Treatment of 1 with 1 equiv of n-BuLi afforded the decomposition product {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe)(mu:sigma-CH2NMe) (3). Complex 5 slowly decomposed to generate a mixed-valence dinuclear species {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe2)(mu:sigma-CH2NMe) (6). Complex 1 reacted with 1 equiv of PhNCO or 2,6-Me2C6H3NC to afford the corresponding monoinsertion product [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-OC(NMe2)NPh] (7) or [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-C(NMe2)=N(2,6-Me2C6H3)] (8). Reaction of 4 or 5 with 1 equiv of R'NC gave the titanium eta(2)-iminoacyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(NMe2)[eta(2)-C(R)=N(R')] (R = CH2SiMe3, R' = 2,6-Me2C6H3 (9) or tBu (10); R = Me, R' = 2,6-Me2C6H3 (11) or tBu (12)). The results indicated that the unsaturated molecules inserted into the Ti-N bond only in the absence of the Ti-C(alkyl) bond and that the Ti-C(cage) bond remained intact. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Molecular structures of 2, 3, 6-8, and 10-12 were further confirmed by single-crystal X-ray analyses.     

Metal-catalyzed reduction of HCONR'2, R' = Me (DMF), Et (DEF), by silanes to produce R'2NMe and disiloxanes: a mechanism unraveled

We demonstrate that using Mo(CO)(6), Mo(CO)(5)NMe(3), and (η(5)-C(5)H(5))Mn(CO)(3) as catalysts for the silane, R(3)SiH, reduction of N,N-dimethylformamide (DMF), and N,N-diethylformamide (DEF), we can observe, intercept, and isolate, the important siloxymethylamine intermediates, R(3)SiOCH(2)NR'(2), R' = Me, Et, for the first time. In the presence of excess DMF such intermediates thermally react with a variety of silanes to form the corresponding disiloxanes in the absence of a metal catalyst. We also show that the germanium hydrides, Et(3)GeH and Bu(3)GeH, also reduce DMF to form trimethylamine and the corresponding digermoxane but observe no intermediates R(3)GeOCH(2)NMe(2). Bu(3)SnH reduces DMF, but along with the low yields of Bu(3)SnOSnBu(3) (but no Bu(3)SnOCH(2)NMe(2)) significant side products are obtained including (Bu(3)Sn)(2) and Bu(4)Sn. In the absence of DMF the siloxymethylamines can undergo metal-catalyzed reactions with silanes, germanes and stannanes to form disiloxanes, and R(3)SiOER(3) E = Ge, Sn, respectively. To date, the most efficient catalyst for this latter process is (η(5)-C(5)H(5))Mo(CO)(3)CH(3) via a photochemical reaction.     

Synthesis,characterization, inequivalency of methylene proton and proton lability in the amino ligand of trans-[dichloro[(N-ferrocenyl methyl)amine](eta2-ethene)platinum] complexes

A series of complexes of the type trans-[PtCl(2)(eta(2)-ethene)(N-ferrocenyl methyl)amine)] complexes, N-ferrocenylmethylamine=[(eta(5)-C(5)-H(5))Fe(eta(5)-C(5)-H(4)CH(2)NHR], R=(Me, Pr(i), Bu(s), Bu(t), CH(2)Ph, (p-OCH(3))Ph, (o-(OCH(3))Ph, (p-CH(3))Ph, (o-CH(3))Ph, (m-CH(3))Ph, (p-Cl)Ph) have been synthesized and characterized on the basis of elemental analysis, IR, 1H and 13C NMR spectroscopic methods. The CpCH(2)NHR (Cp=(eta(5)-C(5)H(5))Fe(eta(5)-C(5)H(4)), region of the 1H NMR spectrum of the complexes has been investigated and shown to contain inequivalent methylene protons, NH-CH and 195Pt-N-CH coupling take place.     

Reactions of amides with organoaluminum compounds: factors affecting the coordination mode of aluminum amidates

Factors affecting the coordination mode of an amidato group on aluminum will be presented. The reaction of N-tert-butylalkylacetamide ((t)BuNHCR([double bond]O)) with 1.1 molar equiv of Me(3)Al in refluxing hexane affords a pentacoordinated, dimeric compound [Me(2)Al[eta(2)-(t)BuNC(R)(mu(2)-O)]](2) (3, R = p-(t)Bu-C(6)H(4); 4, R = 2,6-F,F-C(6)H(3); 5, R = Me; 6, R = CF(3); 7, R = p-F(3)C-C(6)H(4)). However, in the presence of 2.2 molar equiv of Me(3)Al, N-tert-butyl-4-tert-butylbenzamide ((t)BuNHC(p-(t)Bu-C(6)H(4))([double bond]O in refluxing hexane gives [Me(2)Al[eta(2)-(t)BuNC(p-(t)Bu-C(6)H(4))(mu(2)-O)]AlMe(3)], 8. In contrast, the reaction of R'NHCR' '([double bond]O) with 1 molar equiv of R(3)Al at room temperature produces tetracoordinated, dimeric, eight-membered ring aluminum compounds [R(2)Al[mu,eta(2)-R'NC(R' ')O]](2) (9, R = Me, R' = 2,6-(i)Pr, (i)()Pr-C(6)H(3), R' ' = Ph; 10, R = Me, R' = (i)Bu, R' ' = Ph; 11, R = Et, R' = Bn, R' ' = Ph; 12, R = Me, R' = Ph, R' ' = CF(3); 13, R = Me, R' = Bn, R' ' = CF(3)). On the other hand, 4'-chlorobenzanilide ((p-Cl-C(6)H(4))NHCPh([double bond]O)) reacts with R(3)Al to produce trimeric, twelve-membered ring aluminum compounds [R(2)Al[mu, eta(2)-(p-Cl-C(6)H(4))NC(Ph)O]](3) (14, R = Me; 15, R = Et). Furthermore, the reaction of 2'-methoxybenzanilide with 1 molar equiv of Me(3)Al in hexane yields a dinuclear aluminum complex [Me(2)Al(o-OMe-Ph)NC(Ph)(O)AlMe(3)], 16.     

Synthesis and characterisation of aluminium(III) and tin(II) complexes bearing quinoline-based N,N,O-tridentate ligands and their catalysis in the ring-opening polymerisation of ε-caprolactone

The synthesis and catalysis in the ring-opening polymerisation (ROP) of ε-caprolactone (ε-CL) of aluminium(iii) and tin(ii) complexes supported by quinoline-based N,N,O-tridentate ligands are reported. Reaction of 8-{RC(O)CH(2)P(Ph(2)) = N}C(9)H(6)N (R = Bu(t), 2; R = Ph, 3) with AlMe(3) gave [Al(Me(2)){OCR = CHP(Ph(2)) = N(8-C(9)H(6)N)}] (R = Bu(t), 4; R = Ph, 5). Treatment of 2 and 3 with Sn[N(SiMe(3))(2)](2) generated tin(ii) complexes [Sn{OC(R) = CHP(Ph(2)) = N(8-C(9)H(6)N)}{N(SiMe(3))(2)}] (R = Bu(t), 6; R = Ph, 7). A similar reaction of AlMe(3) with 8-{MeC(O)CH(2)C(Me) = N}C(9)H(6)N gave [Al(Me(2)){OC(Me) = CHC(Me) = NC(9)H(6)N}] (9). Compounds 2-9 were characterised by NMR spectroscopy and elemental analysis. The molecular structures of complexes 4, 6 and 9 were determined by single crystal X-ray diffraction techniques. Investigation of catalysis of complexes 4-7 and 9 in the ROP of ε-CL revealed that the aluminium complexes, 4, 5 and 9, are much more active than the tin(ii) complexes. The kinetic studies for the polymerisation of ε-CL catalysed by complexes 4, 5 and 9 in the presence of benzyl alcohol (BnOH) indicated that the polymerisations proceed with the first-order dependence on monomer concentration. The polymerisation was well controlled and gave a polymer with narrow molecular weight distribution.     

Hafnocene catalysts for selective propylene oligomerization: efficient synthesis of 4-methyl-1-pentene by beta-methyl transfer

A series of hafnocene complexes (eta5-C5Me4R1)(eta5-C5Me4R2)HfCl2 with [R1, R2] = [H, H] (1), [Me, H] (2), [Me, Me] (3), [Et, Me] (4), [(i)Pr, Me] (5), [SiMe(3), Me] (6), [(t)Bu, Me] (7), [(n)Bu, Me] (8), [(i)Bu, Me] (9), [Et, Et] (10), [(n)Bu, (n)Bu] (11), [(i)Bu, (i)Bu] (12) was tested as catalyst precursors for propylene oligomerization. Upon activation with methylaluminoxane or [Ph(3)C][B(C(6)F(5))(4)]/Al(i)Bu(3), complexes 2-4 and 8-12 catalyzed the dimerization of propylene to produce 4-methyl-1-pentene with selectivities ranging from 23.9 to 61.6 wt % in the product mixture. The selectivity was dependent on the nature of the substituents R(1) and R(2), with the highest value found for (eta5-C5Me4(i)Bu)2HfCl2 (12). Rapid deactivation was observed for 5-7, whereas (eta5-C5Me4H)2HfCl2 (1) polymerized propylene. 4-Methyl-1-pentene is proposed to form by repeated 1,2-insertion of propylene into the hafnocene methyl cation, followed by selective beta-methyl elimination. Detailed analysis of the byproduct distribution (isobutene, 1-pentene, 2-methyl-1-pentene, 2,4-dimethyl-1-pentene, 4-methyl-1-heptene, 4,6-dimethyl-1-heptene), determined by gas chromatography, was performed with the aid of a stochastic simulation involving rate constants for the propagation by insertion, beta-hydride elimination, and beta-methyl elimination. The rate of termination is dependent on the structure of the growing chain of the active species as well as on the bulkiness of the cyclopentadienyl ligands. The selectivity highly depends on the reaction conditions (pressure, temperature, concentration of methylaluminoxane). The rates of beta-methyl elimination leading to 4-methyl-1-pentene were proportional to propylene pressure for 2-4 and 8-10 but practically independent from propylene pressure for the sterically bulkier derivatives 11-12.     

Synthesis and structural characterization of M(PMe3)3(O2CR)2(OH2)H2 (M = Mo, W): aqua-hydride complexes of molybdenum and tungsten

Mo(PMe(3))(6) and W(PMe(3))(4)(eta(2)-CH(2)PMe(2))H undergo oxidative addition of the O-H bond of RCO(2)H to yield sequentially M(PMe(3))(4)(eta(2)-O(2)CR)H and M(PMe(3))(3)(eta(2)-O(2)CR)(eta(1)-O(2)CR)H(2) (M = Mo and R = Ph, Bu(t); M = W and R = Bu(t)). One of the oxygen donors of the bidentate carboxylate ligand may be displaced by H(2)O to give rare examples of aqua-dihydride complexes, M(PMe(3))(3)(eta(1)-O(2)CR)(2)(OH(2))H(2), in which the coordinated water molecule is hydrogen-bonded to both carboxylate ligands.     

Investigation of the stability of the M-H-B bond in borane sigma complexes [M(CO)5(eta1-BH2R.L)] and [CpMn(CO)2(eta1-BH2R.L)] (M=Cr, W; L=tertiary amine or phosphine): substituent and Lewis base effects

We investigated the influence of a substituent and a Lewis base on boron upon the thermodynamic stability of metal complexes of borane-Lewis base adducts, [M(CO)5(eta1-BH(2)R.L)] (M=Cr, W) and [CpMn(CO)2(eta1-BH2R.L)], where R=Cl, I, m-C6H4F, Ph, H, Me, Et; L=PMe3, PPh3, NMe3, quinuclidine. In these compounds, the stability of the metal-borane linkage was enhanced by increasing the electron-releasing ability of the substituent on boron. A stronger base L additionally stabilized the complexes. The strength of the borane-metal interaction is thus mainly ascribed to the electron donation from the BH sigma orbital to metal rather than the back-donation into the BH sigma* orbital. This result supports the bonding model for the B-H-M linkage in the borane complexes suggested by MO calculations, where the borane-to-metal electron donation is predominant while the metal back-donation into the BH sigma* orbital is negligible. Such a stability trend of the borane complexes makes a sharp contrast to that of many silane and dihydrogen complexes.     

Reactions of the heavier group 14 element alkyne analogues Ar'EEAr' (Ar' = C6H3-2,6(C6H3-2,6-Pri2)2; E = Ge, Sn) with unsaturated molecules: probing the character of the EE multiple bonds

Reactions of the alkyne analogues Ar'EEAr' (Ar' = C6H3-2,6(C6H3-2,6-Pr(i)2)2; E = Ge (1); Sn (2)) with unsaturated molecules are described. Reaction of 1 and 2 with azobenzene afforded the new hydrazine derivatives Ar'E{(Ph)NN(Ph)}EAr' (E = Ge (3); Sn (4)). Treatment of 1 with Me3SiN3 gave the cyclic singlet diradicaloid Ar'Ge{mu2-(NSiMe3)}2GeAr' (5), whereas 2 afforded the monoimide bridged Ar'Sn{mu2-N(SiMe3)}SnAr' (6). Reaction of 1 with t-BuNC or PhCN yielded the adduct Ar'GeGe(CNBu(t))Ar' (7) or the ring compound (8). In contrast, the tin compound 2 did not react with either t-BuNC or PhCN. Treatment of 1 with N2CH(SiMe3) generated Ar'Ge{mu2-CH(SiMe3)}{mu2:eta2-N2CH(SiMe3)}{mu2-N2CH(SiMe3)}GeAr' (9) which contains ligands in three different bridging modes and no Ge-Ge bonding. Reaction of 1 with an excess of N(2)O gave a germanium peroxo species Ar'(HO)Ge(mu2-O)(mu2:eta2-O2)Ge(OH)Ar' (10) which features a ring. Oxidation of 1 by tetracyanoethylene (TCNE) led to cleavage of the Ge-Ge bond and formation of a large multiring system of formula Ar'Ge3+{(TCNE)2-}3{(GeAr')+}3. The digermyne 1 also reacted with 1 equiv of PhCPh to give the 1,2-digermacyclobutadiene 12, which has a ring, and with Me(3)SiCCH or PhCC-CCPh to activate a flanking C6H3-2,6-Pr(i)2 ring and give the tricyclic products 13 and 14. The "distannyne" 2 did not react with these acetylenes. Overall, the experiments showed that 1 is highly reactive toward unsaturated molecules, whereas the corresponding tin congener 2 is much less reactive. A possible explanation of the reactivity differences in terms of the extent of the singlet diradical character of the Ge-Ge and Sn-Sn bonds is discussed.     

Ruthenium complexes of thiocinnamaldehydes: synthesis, structure, and [4+2]-cycloaddition reactions

Ruthenium hydrogensulfido complexes [CpRu(P-P)(SH)] ((P-P)=Ph(2)PCH(2)PPh(2) (dppm), Ph(2)PC(2)H(4)PPh(2) (dppe)) were obtained from the corresponding chloro complexes by Cl/SH exchange. Condensation with a range of cinnamaldehydes gave thiocinnamaldehyde complexes [CpRu(P-P)(S=CH-CR(2)=CHR(1))]PF(6) (R(1)=C(6)H(4)X, R(2)=H, Me, X=H, OMe, NMe(2), Cl, NO(2)) as highly-colored crystalline compounds. The thiocinnamaldehyde complexes undergo [4+2]-cycloaddition reactions with vinyl ethers CH(2)=CHOR(3) (R(3)=Et, Bu) and styrenes H(2)C=CHC(6)H(4)Y (Y=H, Me, OMe, Cl, Br, NO(2)) to give complexes of 2,4,5-trisubstituted 3,4-dihydro-2H-thiopyrans as mixtures of two diastereoisomers. The rate of addition of para-substituted styrenes H(2)C=CHC(6)H(4)Y to [CpRu(dppm)(S=CH-CH=CHPh)]PF(6) increases in the series Y=NO(2), Br, Cl, H, Me, OMe, indicating that the cycloaddition is dominated by the HOMO(dienophile)-LUMO(diene) interaction. The strained dienophiles norbornadiene and norbornene also add, giving ruthenium complexes of 3-thia-tricyclo[6.2.1.0(2,7)]undeca-4,9-dienes and 3-thia-tricyclo[6.2.1.0(2,7)]undec-4-enes, respectively. Addition reactions with acrolein, methacrolein, methyl vinyl ketone, acrylic ester, or ethyl propiolate finally yielded ruthenium complexes of 3,4-disubstituted 3,4-dihydro-2H-thiopyrans and 4H-thiopyrans, respectively.     

Solution structures and dynamic properties of chelated d(0) metal olefin complexes [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))(+) (R = H, Me): Models for the [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(R')(olefin)(+) intermediates in "constrained geometry" catalysts.

To model the Ti-olefin interaction in the putative [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(R')(olefin)(+) intermediates in "constrained geometry" Ti-catalyzed olefin polymerization, chelated alkoxide olefin complexes [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))(+) have been investigated. The reaction of [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]TiMe(2) (1a,b; R = H, Me) with HOCMe(2)CH(2)CH(2)CH=CH(2) yields mixtures of [eta(5)-C(5)R(4)SiMe(2)NH(t)Bu]TiMe(2)(OCMe(2)CH(2)CH(2)CH=CH(2)) (2a,b) and [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]TiMe(OCMe(2)CH(2)CH(2)CH=CH(2)) (3a,b). The reaction of 2a/3a and 2b/3b mixtures with B(C(6)F(5))(3) yields the chelated olefin complexes [[eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))][MeB(C(6)F(5))(3)] (4a,b; 71 and 89% NMR yield). The reaction of 2b/3b with [Ph(3)C][B(C(6)F(5))(4)] yields [[eta(5): eta(1)-C(5)Me(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))][B(C(6)F(5))(4)] (5b, 88% NMR yield). NMR studies establish that 4a,b and 5b exist as mixtures of diastereomers (isomer ratios: 4a/4a', 62/38; 4b/4b', 75/25; 5b/5b', 75/25), which differ in the enantioface of the olefin that is coordinated. NMR data for these d(0) metal olefin complexes show that the olefin coordinates to Ti in an unsymmetrical fashion primarily through C(term) such that the C=C pi bond is polarized with positive charge buildup on C(int). Dynamic NMR studies show that 4b/4b' undergoes olefin face exchange by a dissociative mechanism which is accompanied by fast inversion of configuration at Ti ("O-shift") in the olefin-dissociated intermediate. The activation parameters for the conversion of 4b to 4b' (i.e., 4b/4b' face exchange) are: DeltaH = 17.2(8) kcal/mol; DeltaS = 8(1) eu. 4a/4a' also undergoes olefin face exchange but with a lower barrier (DeltaH = 12.2(9) kcal/mol; DeltaS = -2(3) eu), for the conversion of 4a to 4a'.     

Structural basis for unusually long wavelength charge transfer transitions in complexes [MCl(ECH(2)CH(2)NMe(2))(PR(3))] (E = Te,Se; M = Pt,Pd): experimental results and TD-DFT calculations

A series of new complexes, the blue compounds [PdCl(TeCH(2)CH(2)NMe(2))(PR(3))] (PR(3) = PEt(3), PPr(n)(3), PBu(n)(3), PMe(2)Ph, PMePh(2), PPh(3), PTol(3)) and the red [PtCl(TeCH(2)CH(2)NMe(2))(PR(3))] (PR(3) = PMe(2)Ph, PMePh(2)), were synthesized and studied spectroscopically ((1)H and (31)P NMR, UV/vis) and by cyclic voltammetry. The structures of [PdCl(TeCH(2)CH(2)NMe(2))(PPr(n)(3))] (2b) [PdCl(TeCH(2)CH(2)NMe(2))(PMePh(2))] (2e), [PtCl(TeCH(2)CH(2)NMe(2))(PMePh(2))] (2i), and the related [PtCl(SeCH(2)CH(2)NMe(2))(PEt(3))] (3) were determined crystallographically, revealing a typical pattern of trans-positioned neutral N and P donor atoms in an approximately square planar setting. The molecules 2b, 2e, and 2i were calculated by TD-DFT methodology to understand the origin of the weak (epsilon approximately 200 M(-1) cm(-1)) long-wavelength bands at about 600 nm for Pd/Te complexes such as 2b or 2e, at ca. 460 nm for Pt/Te systems such as 2i, and at about 405 nm for Pt/Se analogues such as 3. These transitions are identified as charge transfer transitions from the selenolato or tellurolato centers to unoccupied orbitals involving mainly the phosphine coligands for the Pt(II) compounds and more delocalized MOs for the Pd(II) analogues. Calculations and electrochemical data were used to rationalize the effects of metal and chalcogen variation.     

Indenyl zirconium dinitrogen chemistry: N2 coordination to an isolated zirconium sandwich and synthesis of side-on, end-on dinitrogen compounds

Exposure of the isolable zirconocene sandwich compounds, (eta(5)-C5Me5)(eta(5)-C9H5-1-R(1)-3-R(2))Zr (R(1) = Me, (i)Pr, (t)Bu; R(2) = Me) to one atmosphere of dinitrogen resulted in N2 coordination. X-ray diffraction and NMR spectroscopy establish that the resulting dimeric dinitrogen compounds contain an unusual mu2,eta(2)-bridging indenyl ring and a weakly activated N2 ligand. N2 coordination from the isolable zirconium sandwich compounds is extremely sensitive to the number and size of the indenyl subsituents. Compounds bearing two [(i)Pr] or three methyl substituents are stable as eta(9) sandwich compounds for weeks under dinitrogen likely due to the inability to dimerize through a two-atom N2 bridge. Performing the reduction of (eta(5)-C5Me5)(eta(5)-C9H5-1-R(1)-3-R(2))ZrCl2 (R(1) = (i)Pr, (t)Bu; R(2) = Me; R(1) = R(2) = SiMe3) under an N2 atmosphere produced a different outcome; rare examples of side-on, end-on zirconium dinitrogen compounds were isolated and in one case, crystallographically characterized. Protonolysis studies with weak Br?nsted acids were used to evaluate the relative activation of the bridging dinitrogen ligands.     

Specific insertion reactions of a germylene, stannylene and plumbylene into the unique P-P bond of the hexaphospha-pentaprismane cage, P6C4tBu4: crystal and molecular structures of P6C4tBu4ER2 (E = Ge, Sn, R = N(SiMe3)2; E = Pb, R = (C6H3(NMe2)2 -2,6)

Treatment of the cage compound P6C4(t)Bu4 with M(N(SiMe3)2)2 (M = Ge or Sn) or Pb(C6H3(NMe2)2- 2,6) at room temperature results in their specific insertion into the P-P bond connecting the two 5-membered P3C2(t)Bu2 rings. The products were fully characterised by multinuclear NMR spectroscopy and single crystal X-ray diffraction studies.     

Reactivity of the inversely polarized phosphaalkenes RP=C(NMe2)2 (R = tBu, Me3Si, H) towards arylcarbene complexes [(CO)5M=C(oEt)Ar] (Ar= Ph, M = Cr, W; Ar = 2-MeC6H4, 2-MeOC6H4, M = W)

The reaction of the arylated Fischer carbene complexes [(CO)5M=C(OEt)Ar] (Ar=Ph; M = Cr, W; 2-MeC6H4; 2-MeOC6H; M = W) with the phosphaalkenes RP=C(NMe2), (R=tBu, SiMe3) afforded the novel phosphaalkene complexes [[RP=C(OEt)Ar]M(CO)5] in addition to the compounds [(RP=C(NMe2)2]M(CO)5]. Only in the case of the R = SiMe3 (E/Z) mixtures of the metathesis products were obtained. The bis(dimethylamino)methylene unit of the phosphaalkene precursor was incorporated in olefins of the type (Me2N)2C=C(OEt)(Ar). Treatment of [(CO)5W=C(OEt)(2-MeOC6H4)] with HP=C(NMe2)2 gave rise to the formation of an E/Z mixture of [[(Me2N)2CH-P=C(OEt)(2-MeOC6H4)]W(CO)5] the organophosphorus ligand of which formally results from a combination of the carbene ligand and the phosphanediyl [P-CH(NMe2)2]. The reactions reported here strongly depend on an inverse distribution of alpha-electron density in the phosphaalkene precursors (Pdelta Cdelta+), which renders these molecules powerfu] nucleophiles.     

Synthesis and thermolysis of alkyl- and phenylamido diphenylgallium, [Ph(2)GaN(H)R](2). isolation and structural characterization of (PhGaNMe)(7) and (PhGaNPh)(4)

Alkyl- and phenylamido diphenylgallium compounds, [Ph(2)GaN(H)R](2) (R = Me, 1; Et, 2; (n)Pr, 3; (i)Bu, 4; Ph, 5), were prepared from the reactions of Ph(3)Ga with the corresponding primary amines and aniline at elevated temperatures and were characterized by elemental analysis, mass spectroscopy, and (1)H NMR and IR spectroscopy. These dimeric compounds contained bridging amido groups and exhibited both trans and cis isomers in solution. Thermolysis of compounds 1 and 5 was carried out either without solvent or in dodecane solutions, and two clusters, (PhGaNMe)(7) 6 and (PhGaNPh)(4) 7, were isolated in 24% and 55% yields and characterized. The structure of 6 consisted of a heptameric Ga(7)N(7) core constructed with Ga(2)N(2) and Ga(3)N(3) rings, and the structure of 7 possessed a Ga(4)N(4) cubane core.     

Coordination chemistry and reactivity of monomeric alkoxides and amides of magnesium and zinc supported by the diiminato ligand CH(CMeNC(6)H(3)-2,6-(i)Pr(2))(2). A comparative study

The preparation and characterization of a series of closely related magnesium and zinc compounds are reported: LMg(N(i)Pr(2))(THF), 1; LZn(N(i)Pr(2)), 2; LMg(O(t)Bu)(THF), 3; LZn(O(t)Bu), 4; and LZn(OSiPh(3))(THF), 6; where L = CH(CMeNC(6)H(3)-2,6-(i)Pr(2))(2). Their dynamic solution behavior has been examined by variable-temperature NMR studies and reveals that THF reversibly dissociates in toluene-d(8) or CD(2)Cl(2) and that exchange with free THF occurs by a dissociative process. Compounds 1-4 and 6 all initiate and subsequently sustain ring-opening polymerization (ROP) of lactides. For a related series of compounds LMX(THF)(n)(), where n = 1 or 0, the rate of initial ring-opening follows the order M = Mg > Zn and X = O(t)Bu > N(i)Pr(2) > NSi(2)Me(6) > OSiPh(3). In THF at 25 degrees C, compounds 3 and 4 polymerize 100 equiv of rac-lactide to >95% conversion in 5 and 80 min for M = Mg and Zn, respectively, and yield ca. 90% heterotactic PLA, (isi + sis tetrads). The reactions proceed faster in methylene chloride, but for M = Mg, a Bernoulian distribution of tetrads is formed from rac-lactide (3iii:2isi:sii:sis:iis) prior to trans-esterification. Polymerization of L-LA in toluene-d(8) and THF-d(8) by 3 and 4 have been studied by VT (1)H NMR spectroscopy: the resting state for zinc is proposed to be a monomeric species akin to LZn(eta(2)-OCHMeC(O)OMe), whereas the magnesium complex appears to be dimeric LMg(mu-OP)(2)MgL. None of the compounds is capable of initiating homopolymerization of propylene oxide (PO) or cyclohexene oxide (CHO), although the magnesium amide 1 effects ring-opening by allylic proton abstraction and the dimeric compound [LMg(mu-OC(6)H(9))](2), 7, is formed. Reactions with carbon dioxide are also described, along with the characterization of LZnO(2)CN(i)Pr(2), 8, which is shown to be inert with respect to CHO and PO at room temperature. All the compounds are hydrolytically sensitive, and LZn(mu-OH)(2)ZnL, 5, has been isolated from hydrolysis of compound 4. The crystal and molecular structures are reported for compounds 1-5, 7, and 8. These results are compared with those recently reported by Coates et al.     

Reactivity of the bis(pentafluorophenyl)boranes ClB(C6F5)2 and [HB(C6F5)2]n towards late transition metal reagents

The reactivities of the highly electrophilic boranes ClB(C(6)F(5))(2) (1) and [HB(C(6)F(5))(2)](n) (2) towards a range of organometallic reagents featuring metals from Groups 7-10 have been investigated. Salt elimination chemistry is observed 1 between and the nucleophilic anions eta(5)-C(5)R(5))Fe(CO)(2)](-)(R = H or Me) and [Mn(CO)(5)](-), leading to the generation of the novel boryl complexes (eta(5)-C(5)R(5))Fe(CO)(2)B(C(6)F(5))(2)[R = H (3) or Me (4)] and (OC)(5)MnB(C(6)F(5))(2) (5). Such systems are designed to probe the extent to which the strongly sigma-donor boryl ligand can also act as a pi-acceptor; a variety of spectroscopic, structural and computational probes imply that even with such strongly electron withdrawing boryl substituents, the pi component of the metal-boron linkage is a relatively minor one. Similar reactivity is observed towards the hydridomanganese anion [(eta(5)-C(5)H(4)Me)Mn(CO)(2)H](-), generating a thermally labile product identified spectroscopically as (eta(5)-C(5)H(4)Me)Mn(CO)(2)(H)B(C(6)F(5))(2) (6). Boranes 1 and 2 display different patterns of reactivity towards low-valent platinum and rhodium complexes than those demonstrated previously for less electrophilic reagents. Thus, reaction of 1 with (Ph(3)P)(2)Pt(H(2)C=CH(2)) ultimately generates EtB(C(6)F(5))(2) (10) as the major boron-containing product, together with cis-(Ph(3)P)(2)PtCl(2) and trans-(Ph(3)P)(2)Pt(C(6)F(5))Cl (9). The cationic platinum hydride [(Ph(3)P)(3)PtH](+) is identified as an intermediate in the reaction pathway. Reaction of with [(Ph(3)P)(2)Rh(mu-Cl)](2), in toluene on the other hand, appears to proceed via ligand abstraction with both Ph(3)P.HB(C(6)F(5))(2) (11) and the arene rhodium(I) cation [(Ph(3)P)(2)Rh(eta(6)-C(6)H(5)Me)](+) (14) ultimately being formed.