Synthesis and Characterization of Novel Methacrylic Copolymers: Determination of Monomer Reactivity Ratios

A new methacrylic monomer, 4‐nitro‐3‐methylphenyl methacrylate (NMPM) was prepared by reacting 4‐nitro‐3‐methyl phenol dissolved in methyl ethyl ketone (MEK) in the presence of triethylamine as a catalyst. Copolymerization of NMPM with methyl methacrylate (MMA) has been carried out in methyl ethyl ketone (MEK) by free radical solution polymerization at 70±1°C utilizing benzoyl peroxide (BPO) as initiator. Poly (NMPM‐co‐MMA) copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weights (M_w and M_n) and polydispersity indices (M_w/M_n) of the polymers were determined using a gel permeation chromatograph. The glass transition temperatures (T_g) of the copolymers were determined by a differential scanning calorimeter, showing that T_g increases with MMA content in the copolymer. Thermogravimetric analysis of the polymers, performed under nitrogen, shows that the stability of the copolymer increases with an increase in NMPM content. The solubility of the polymers was tested in various polar and non‐polar solvents. Copolymer compositions were determined by ¹H‐NMR spectroscopy by comparing the integral peak heights of well separated aromatic and aliphatic proton peaks. The monomer reactivity ratios were determined by the Fineman‐Ross (r₁ =7.090:r₂=0.854), Kelen‐Tudos (r₁=7.693: r₂=0.852) and extended Kelen‐Tudos methods (r₁=7.550: r₂= 0.856).     

PHOTOPOLYMERS: SYNTHESIS AND CHARACTERIZATION OF POLY(4-CINNA-MOYLPHENYL METHACRYLATE) WITH GLYCIDYL METHACRYLATE

Copolymers of 4-cinnmoylphenyl methacrylate (CPMA) with glycidyl methacrylate were synthesized in methyl ethyl ketone solution using benzoyl peroxide as initiator at 70 ± 1°C. They were characterized by UV, IR, ¹H-NMR, and ¹³C-NMR spectra. Their compositions were determined by ¹H-NMR technique. The monomer reactivity ratios were determined by the Fineman-Ross and Kelen-Tüdös methods. The molecular weights ([Mbar]_w and [Mbar]_n) of the polymers were determined by GPC technique. Thermogravimetric analysis of the copolymers were carried out in air. The T_g of the polymers were determined by differential scanning calorimetry. The photocrosslinking properties of the homo and copolymers were also discussed.     

Copolymers of p-Nitrobenzyl Acrylate with Methyl Acrylate: Synthesis,Characterization, and Monomer Reactivity Ratios

Abstract

Copolymers of p-nitrobenzyl acrylate and methyl acrylate with different feed ratios are synthesized in ethyl methyl ketone using benzoyl peroxide as a free radical initiator at 70 ± 1°C. The copolymers were characterized by IR and ¹H-NMR spectroscopic techniques. Copolymer compositions were determined by ¹H-NMR analysis of the polymers. The monomer reactivity ratios were determined by the application of conventional linearization methods such as Fineman–Ross and Kelen–Tüdös. Gel permeation chromatography was used for determining the molecular weights M _n and M _w, and the polydispersity index. The intrinsic viscosities and the thermal properties of the homo- and copolymers are also discussed.     

Copolymerization of 4‐Propanoylphenyl Acrylate with Methyl Methacrylate: Synthesis,Characterization and Reactivity Ratios

The new acrylic monomer 4‐propanoylphenyl acrylate (PPA) was synthesized and copolymerized with methyl methacrylate (MMA) in methyl ethyl ketone at 70±1°C using benzoyl peroxide as a free radical initiator. The copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopic techniques. The compositions of the copolymers were determined by ¹H‐NMR analysis. The reactivity ratios of the monomers were determined using Fineman‐Ross (r₁=0.5535 and r₂=1.5428), Kelen‐Tüdös (r₁=0.5307 and r₂=1.4482), and Ext. Kelen‐Tüdös (r₁=0.5044 and r₂=1.4614), as well as by a nonlinear error‐in‐variables model (EVM) method using a computer program, RREVM (r₁=0.5314 and r₂=1.4530). The solubility of the polymers was tested in various polar and non‐polar solvents. The elemental analysis was determined by a Perkin‐Elmer C‐H analyzer. The molecular weights (M_w and M_n) of the copolymers were determined by gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of MMA in the copolymers. Glass transition temperatures of the copolymers were found to increase with an increase in the mole fraction of MMA in the copolymers.     

Copolymers of 4‐(3′,4′‐Dimethoxycinnamoyl)phenyl Acrylate and MMA: Synthesis,Characterization, Photocrosslinking Properties,and Monomer Reactivity Ratios

Abstract

4‐(3′,4′‐Dimethoxycinnamoyl)phenyl acrylate (DMCPA) containing pendant chalcone moiety was copolymerized with methyl methacrylate (MMA) by radical polymerization in ethyl methyl ketone at 70°C under a nitrogen atmosphere using benzoyl peroxide (BPO) as a free radical initiator. The prepared polymer was characterized by UV, FT‐IR, ¹H‐NMR, and ¹³C‐NMR spectra. The composition of the copolymer was determined using ¹H‐NMR analysis. The monomer reactivity ratios of copolymerization were determined using conventional linearization methods such as Fineman–Ross (r ₁ = 0.26 and r ₂ = 0.61), Kelen–Tudos (r ₁ = 0.26 and r ₂ = 0.61), and Ext. Kelen–Tudos (r ₁ = 0.23 and r ₂ = 0.59), and a non‐linear error‐in‐variables model (EVM) method using the computer program RREVM (r ₁ = 0.2541 and r ₂ = 0.6094). The molecular weights (M _w and M _n) of the copolymers were determined by gel permeation chromatography. Thermogravimetric analysis of the polymers in air reveals that the stability of the copolymers decreases with an increase in the mole fraction of MMA in the copolymers. The solubility of the polymers was tested in various polar and non‐polar solvents. The glass transition temperature of the copolymers was determined as a function of copolymer composition. The copolymers were sensitive to UV light and became crosslinked after irradiation with 254 nm light.     

Synthesis and Characterization of Amphiphilic PEG Based Polymers and Their Self Assembling Behavior

Sixteen amphiphilic polymers were synthesized using poly(ethylene glycols) (PEGs) of different molecular weights, viz. 1000, 1500, 2000 and 4000 as hydrophilic block and linkers namely azelaic acid, suberic acid, terephthalic acid and glycolic acid as hydrophobic block in the presence of catalyst conc. H₂SO₄ out of which four with glycolic acid as linker are new. Synthesized polymers were characterized by using ¹H-NMR, ¹³C-NMR and IR spectroscopy. Micellar sizes of the polymers were determined using Dynamic Light Scattering (DLS) technique which ranged from 32.1–262.0 nm and confirmed by Transmission Electron Microscope (TEM) analysis. Molecular weights were determined using HORIBA SZ-100 scientific and varied from 6.5?×?10² to 6.5?×?10³ Kilo Daltons(kDa) by Debye plot. Critical Micelle Concentrations (CMC) of the synthesized polymers was determined using electrical conductivity meter and it ranged from 105 to 125 milligrams per litre (mg L^?1).     

Polymerization of N,N-Dimethylaminopropyl-Acrylamide Through Hydrogen Transfer Induced by the Propagation of the Polyacrolein Anion

The anionic polymerization of acrolein (AL) with N, N-dimethylamino-propylacrylamide (DMAPA) in the presence of water was investigated in tetrahydrofuran, benzene, and ethanol at 0°C in a nitrogen atmosphere. The resulting polymers were found to be essentially vinyl polymers with one DMAPA attached and an aldehyde side chain. From observations of the polymerization process by ¹H NMR, we find that polymerization was initiated by the hydroxyl anion formed in the thermodynamic equilibrium between the amine of DMAPA and water. The hydrogen transfer reaction of DMAPA was caused by the propagating poly-AL anion. On the other hand, the monomer reactivity ratios and the Q₂-e₂values of DMAPA were determined by the free-radical copolymerization of styrene (St, M₁) with DMAPA and AIBN as initiator.     

Novel Photosensitive Polymer: Synthesis,Characterization and Thermal Properties of Polymer having Pendant Photocrosslinkable Group

New methacrylic monomer having free radical polymerizable methacryloyl group and photocrosslinkable functional group was synthesized by reacting hydroxyl chalcone with methacryloyl chloride. The monomer was homopolymerized in methyl ethyl ketone solvent using benzoyl peroxide as an initiator at 70°C. The prepared homopolymer was characterized by UV, FT‐IR, ¹H‐NMR and ¹³C‐NMR spectra. The molecular weights (M_w and M_n) were estimated by gel permeation chromatography. The thermal stability of the polymer was measured by thermogravimetric analysis. The glass transition temperature of the polymer was determined by differential scanning calorimetry. The photocrosslinking property of the polymer was also studied.     

Synthesis and Characterization of Amphiphilic PEG Based Aliphatic and Aromatic Polymers and their Self-Assembling Behavior

Twelve amphiphilic polymers were synthesized using poly(ethylene glycols) (PEGs) of different molecular weights, viz. 1000, 2000 and 4000 as hydrophilic block and linkers namely azelaic acid, sebacic acid, dimethyl isophthalate acid and dimethyl terephthalate as hydrophobic block in the presence of catalyst Conc. H₂SO₄. Synthesized polymers were characterized by using ¹H-NMR, ¹³C-NMR and IR spectroscopy. Micellar sizes of the polymers were determined using Dynamic Light Scattering (DLS) which ranged from 51.6–174 nm for aliphatic polymers and 135.5–371 nm for aromatic polymers. Transmission Electron Microscope (TEM) results confirm the findings of DLS. Critical Micelle Concentrations (CMC) of the synthesized polymers were determined using electrical conductivity meter which ranged from 95 to 130 mg L^?1 for aliphatic polymers and 420–1500 mg L^?1 for aromatic polymers.     

Synthesis and Characterization of Novel Surfactant Molecules Based on Amphiphilic Polymers

Twelve amphiphilic polymers were synthesized using poly(ethylene glycols) (PEGs) of different molecular weights, viz. 300, 600 and1000 as hydrophilic block and aliphatic diacids namely glutaric acid, adipic acid, pimelic acid and suberic acid as hydrophobic block in presence of catalyst Conc. H₂SO₄. Synthesized polyesters were characterized by using ¹H-NMR, ¹³C-NMR and IR spectroscopy. Micellar sizes of the polymers were determined using Dynamic Light Scattering (DLS) which ranged from 127.5–354 nm. Transmission Electron Microscope (TEM) results confirm the findings of DLS. Critical Micelle Concentrations (CMC) of the synthesized polymers were determined using electrical conductivity meter which ranged from 112 to 155 mg L^?1.     

Polymers and Copolymers of Vinyl Monomers with Blocked Isocyanate Groups: Synthesis and Characterization

Abstract

The polymerization of vinyl monomers containing blocked isocya-nate groups is reported. The blocking agents for the isocyanate groups of 2-isocyanato methacrylate were phenol, propanone oxime, benzophe-none oxime, and ecaprolactam. The ¹H-NMR and IR spectra of these polymers are discussed. Copolymerization reactivity ratios of the vinyl monomer blocked by phenol with styrene and methyl methacrylate have been determined. Glass transition temperatures of these polymers have been determined by differential scanning calorimetry. The homo– and copolymers were crosslinked in the presence of ethylene diamine, and the gels obtained were examined by IR spectra.     

Novel Copolymers of N‐(4‐Bromophenyl)‐2‐Methacrylamide with 2‐Acrylamido‐2‐Methyl‐1‐Propanesulfonic Acid

The new acrylamide monomer, N‐(4‐Bromophenyl)‐2‐methacrylamide (BrPMAAm) has been synthesized by reacting 4‐Bromoaniline with methacryloyl chloride in the presence of triethylamine(NR₃) at 0–5°C. The radical‐initiated copolymerization of (BrPMAAm), with 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) has been carried out in dimethylformamide (DMF) solution at 70±1°C using 2,2′‐azobisisobutyronitrile (AIBN) as an initiator with different monomer‐to‐monomer ratios in the feed. The copolymers were characterized by FTIR, ¹H‐ and ¹³C‐NMR spectroscopy. The copolymer composition was evaluated by nitrogen content (N for AMPS‐units) in polymers led to the determination of reactivity ratios. The monomer reactivity ratios for BrPMAAm (M₁)‐AMPS (M₂) pair were computed using the Fineman‐Ross (F‐R), Kelen‐Tüdös (KT) and Extended Kelen‐Tüdös (EKT) methods. These parameters were also estimated using a non‐linear computational fitting procedure, known as reactivity ratios error in variable model (RREVM). The mean sequence lengths determination indicated that the copolymer was statistically in nature. By TGA and DSC analyses, the thermal properties of the polymers have been studied. The antimicrobial effects of polymers were also tested on various bacteria, and yeast.     

Ternary complexes of cobalt cysteinylglycine with histidylserine and histidylphenylalanine-stabilities and DNA cleavage properties

Interaction of cobalt cysteinylglycine with histidylserine and histidylphenylalanine was investigated in a 1 : 1 : 1 ratio at 35°C and 0·10 mol dm⁻³ ionic strength. Their stabilities and geometries were determined. Their DNA binding and cleavage properties were investigated. The intrinsic binding constants (K _b ) for DNA bound 1 and 2 (3·03 × 10³ M⁻¹ for 1 and 3·87 × 10³ M⁻¹ for 2) were determined. Even though the negative charge on the complexes reduced their affinity for DNA, there was an enhancement of binding through specificity. The degradation of plasmid DNA was achieved by cobalt dipeptide complexes [Co^II(CysGly)(HisSer)] (1) and [Co^II(CysGly)(HisPhe)] (2). Cleavage experiments revealed that 1 and 2 cleave supercoiled DNA (form I) to nicked circular (form II) through hydrolytic pathway at physiological pH. The DNA hydrolytic cleavage rate constants for complexes 1 and 2 were determined to be 0·62 h⁻¹, for 1 and 0·38 h⁻¹ for 2 respectively.     

The modes of complexation of benzimidazole with aqueous β-cyclodextrin explored by phase solubility, potentiometric titration, 1H-NMR and molecular modeling studies

The results of rigorous modeling of phase solubility diagrams, pH solubility profiles and potentiometric titrations revealed the following for benzimidazole (BZ) and BZ/β-CD complexation in aqueous solution: (a) the pK _a value of BZ estimated at 5.66 ± 0.08 was reduced to 5.33 ± 0.06 in the presence of 15 mM β-CD at 25 °C, thus indicating inclusion complex formation; (b) BZ forms soluble 1:1 and 2:1 BZ/β-CD complexes with complex formation constants K ₁₁ = 104 ± 8 M⁻¹ and K ₂₁ = 16 ± 6 M⁻¹; (c) protonated BZ forms only 1:1 complex with K ₁₁ = 42 ± 12 M⁻¹; (d) ¹H-NMR studies in D₂O showed significant upfield chemical shift displacements for inner cavity β-CD protons indicating inclusion complex formation, while (e) Molecular modeling of BZ-β-CD interactions in water clearly indicated complete inclusion of one BZ molecule into the β-CD cavity.     

Monomer reactivity ratios for acrylonitrile–methyl acrylate free‐radical copolymerization

Nonlinear monomer reactivity ratios for the homogeneous free‐radical copolymerization of acrylonitrile and methyl acrylate were determined from ¹H NMR and real‐time Fourier transform infrared (FTIR) analyses. All ¹H NMR data were obtained on polymers isolated at low conversions (<10%), whereas the FTIR data were collected in situ. The copolymerizations were conducted in N,N‐dimethylformamide at 62 °C and were initiated with azobisisobutyronitrile. The real‐time FTIR technique allowed for many data points to be collected for each feed composition, which enabled the calculation of copolymer compositions (dM₁/dM₂) with better accuracy. Monomer reactivity ratios were estimated with the Mayo–Lewis method and then were refined via a nonlinear least‐squares analysis first suggested by Mortimer and Tidwell. Thus, monomer reactivity ratios at the 95% confidence level were determined to be 1.29 ± 0.2 and 0.96 ± 0.2 for acrylonitrile and methyl acrylate, respectively, which were valid under the specific system conditions (i.e., solvent and temperature) studied. The results are useful for the development of acrylonitrile (<90%) and methyl acrylate, melt‐processable copolymer fibers and films, including precursors for carbon fibers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2994–3001, 2004     

Synthesis and Characterization of Novel Methacrylates Derived from Morpholine and Pyrrolidine: The Determination of Kinetic Parameters with Thermogravimetric Analysis

Abstract

The synthesis of two new methacrylate esters containing morpholine and pyrrolidine group are described. The monomers produced from the reaction of corresponding morpholino chloroacetamide and pyrrolidino chloroacetamide with sodium methacrylate were polymerized in DMSO solution at 65°C using AIBN as an initiator. The monomers and their polymers were characterized by Fourier transform infrared (FTIR), ¹H‐ and ¹³C‐NMR spectroscopy. The glass transition temperature of the polymers were investigated by DSC and thermal decomposition activation energies were calculated by the Ozawa method using the SETARAM Labsys thermogravimetric analysis (TGA) thermobalance, respectively. By using gel permeation chromatography, weight average (M¯_w) and number average (M¯_n) molecular weights and polidispersity indices of the polymers were determined.     

Synthesis and characterization of chiral azo LCPs with optical properties

ABSTRACT

In this study, we designed, synthesised and characterised two series of cholesteric liquid crystal polymers, QP series and ZP series. With polymethylhydrosiloxane as the main chain, QP series were synthesised by copolymerisation between the monomer M₁ containing a cholesteryl mesogenic unit and the monomer M₂ with a hydroxyl. ZP series, meanwhile, were synthesised by esterification between QP series members and the monomer M₃, a carboxylic acid with an azo mesogenic unit. We characterised chemical structures of all the monomers and polymers by FT-IR and ¹H-NMR, which proved that the target monomers and polymers had been obtained. We observed dramatic colour changes after the introduction of monomer M₃ and Grandjean textures from both QP series and ZP series using POM. In addition, strong selective reflection could be observed as well. Then, we characterised the thermal properties of polymers by DSC, TGA and XRD to explore their phase transition behaviours further. Their photoresponsive and photochromic properties were characterised by UV-Vis spectrum.     

Synthesis and Characterization of Novel Methacrylate Monomers Having Pendant Oxime Esters and Their Copolymerization with Styrene

New methacrylate monomers, 2‐{[(diphenylmethylene)amino]oxy}‐2‐oxoethyl methacrylate (DPOMA) and 2‐{[(1‐phenylethylidene)ami no]oxy}‐2‐oxoethyl methacrylate (MMOMA) were prepared by reaction of sodium methacrylate with diphenylmethanone O‐(2‐chloroacetyl) oxime and 1‐phenylethanone O‐(2‐chloroacetyl) oxime, respectively. They were obtained from a reaction of chloroacetyl chloride with benzophenone oxime or acetophenone oxime. The free‐radical‐initiated copolymerization of (DPOMA) and (MMOMA) with styrene (St) were carried out in 1,4‐dioxane solution at 65°C using 2,2‐azobisisobutyronitrile (AIBN) as an initiator with different monomer‐to‐monomer ratios in the feed. The monomers and copolymers were characterized by FTIR, ¹H‐ and ¹³C‐NMR spectral studies. The copolymer compositions were evaluated by nitrogen content in polymers. The reactivity ratios of the monomers were determined by the application of Fineman–Ross and Kelen–Tüdös methods. The molecular weights (M¯_w and M¯_n) and polydispersity index of the polymers were determined by using gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of St in the copolymers. The activation energies of the thermal degradation of the polymers were calculated with the MHRK method. Glass transition temperatures of the copolymers were found to decrease with an increase in the mole fraction of DPOMA or MMOMA in the copolymers. The antibacterial and antifungal effects of the monomers and polymers were also investigated on various bacteria and fungi. The photochemical properties of the polymers were investigated by UV and FTIR spectra.     

Synthesis and characterization of functionalized amphiphilic polymers for utilization as surfactants

Eight novel PEG-based amphiphilic block copolymers having self-assembling properties has been reported in the present study. The polymers have been synthesized by reacting Poly(ethylene glycols) (PEGs) of different molecular weights viz. 600, 1000, 1500 and 2000 and dimethyl-5-hydroxyisophthalate in presence of concentrated H₂SO₄ as catalyst in solventless condition at 80–90°C and further alkylating the resulting polymers by attaching octyl and hexadecanyl chains to phenolic hydroxyl group. The resulting functionalized amphiphilic polymers have been characterized by ¹H and ¹³C-NMR spectroscopy. These polymers, when dissolved in water, aggregate to form micelles, giving sizes ranging from 13.00 to 87.24 nm as determined by Dynamic Light Scattering (DLS) instrument. The molecular weights have been also calculated from the DLS and are in the range 3.5×10⁴ to 1.8×10⁶ KDa (Kilo Daltons). Critical Micelle Concentrations (CMC) of the synthesized polymers was determined using electrical conductivity meter with values in the range of 105 to 138 mg L^?1 (milligrams per litre).     

二烷基锡聚合物的研究——Ⅲ.顺丁烯二酸二丁基锡酯与丙烯酸甲酯、丙烯酸丁酯的共聚合

Benzoyl peroxide (BPO) was used for initiator in copolymerization of dibutyltin maleate (DBTM, M₂) with methyl acrylate (MA, M₁) in benzene and the reactivity ratios of copolymerization r1 and r2 were found to be 12.67 and 0.03, respectively. But in copolymerization of DBTM (M₂) with butyl acrylate (BA, M₁) r1 and r2 were 11.1 and 0> respectively. The cc-polymerization conditions, such as amount of initiator, ratios of monomers and addition method of initiator were examined. Copolymers were characterized by ¹H-NMR,IR,elemental and TG analyses. MA-DBTM copolymer is a white and brittle solid, while BA-DBTM copolymer is a transparent elastomer at room temperature.