Molecular design and synthesis of novel side-chain liquid crystalline polymers

Novel side-chain liquid crystalline polymers were synthesized based on the molecular design of the chemical structures of main-chain, spacer, and mesogenic groups. The main-chain structures are polyether, by the cationic ring-opening polymerization of oxetane derivatives, and polydiene, by the radical polymerization of diene derivatives. Some of the polymers from oxetanes with various mesogen and spacer groups show smectic liquid crystalline phase. Both cyano- and fluorine-substituted biphenyls are good mesogenic groups in these liquid crystalline polymers. Polydiene also acts as a novel main-chain to give smectic liquid crystalline state with cyanobiphenyl or fluorobiphenyl as a mesogen. Not only oligomethylene groups but also siloxane and oligo(oxyethylene) groups act as a component of the spacer groups to give liquid crystalline state.     

Reaction of oligomethylene di(3-oxobutanoate) with 1,1-disubstituted alkenes and molecular oxygen in the presence of manganese(II and/or IE) acetate

The reactions of 1,1-disubstituted ethenes with oligomethylene di(3-oxobutanoate) in the presence of manganese(II and/or III) acetate and atmospheric oxygen yielded an ω-(3-oxobutanoyloxy)alkyl 6,6-diaryl-3-hydroxy-3-methyl-1,2-dioxane-4-carboxylate, oligomethylene di(6,6-diaryl-3-hydroxy-3-methyl-1,2-dioxane-4-carboxylate)s, ω-hydroxyalkyl 6,6-diaryl-3-hydroxy-3-methyl-1,2-dioxane-4-carboxylates, an ω-(3-oxobutanoyloxy)alkyl 5,5-diaryl-2-methyl-4,5-dihydrofuran-3-carboxylate, oligomethylene di(5,5-diaryl-2-methyl-4,5-dihydrofuran-3-carboxylate)s, ω-hydroxyalkyl 5,5-diaryl-2-methyl-4,5-dihydrofuran-3-carboxylates, and an ohgomethylene diester bearing a substituted 1,2-dioxane ring and a substituted 4,5-dihydrofuran ring. The reaction of the 1,2-dioxan-3-ols with acid gave the corresponding compounds bearing furan rings. The reaction of 1,1,6,6-tetraaryl-1,5-hexadienes with oligomethylene di(3-oxobutanoate) in the presence of manganese(III) acetate yielded macrocyclic diesters bearing two 4,5-dihydrofuran rings.     

Gel formation in cationic polymerization of divinyl ethers. III. Effect of oligooxyethylene chain versus oligomethylene chain as central spacer units

Cationic polymerizations of two series of divinyl ethers were carried out to clarify the effects of their central spacer chain structure on their crosslinking polymerization behavior. One series of the monomers involves divinyl ethers with an oligooxyethylene central spacer chain: diethylene glycol divinyl ether ( O‐3 ), triethylene glycol divinyl ether ( O‐4 ), tetraethylene glycol divinyl ether ( O‐5 ), pentaethylene glycol divinyl ether ( O‐6 ), and heptaethylene glycol divinyl ether ( O‐8 ) (see Scheme 1 ). The other series includes divinyl ethers with an oligomethylene central spacer chain: 1,4‐butanediol divinyl ether ( C‐4 ), 1,6‐hexanediol divinyl ether ( C‐6 ), and 1,8‐octanediol divinyl ether ( C‐8 ). Cationic polymerizations of these monomers were carried out with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in methylene chloride (CH₂Cl₂) at ?30 °C ([Monomer]₀ = 0.15 M; [HCl]₀ = 5.0 mM; [ZnCl₂]₀ = 0.5 mM). The polymerizations of the oligomethylene‐based divinyl ethers C‐6 and C‐8 caused gel formation at high monomer conversions (～90%), whereas C‐4 formed soluble polymers even at almost 100% monomer conversion. The oligooxyethylene‐based divinyl ethers O‐3 , O‐4 , O‐5 , and O‐6 underwent gel‐free polymerizations up to 100% monomer conversion and O‐8 did so at least up to ～80% conversion. The content of unreacted pendant vinyl groups of the obtained soluble polymers was measured by ¹H NMR spectroscopy. In the polymerizations of the oligomethylene‐based divinyl ethers ( C‐4 , C‐6 , and C‐8 ), the vinyl contents of the polymers decreased monotonously with increasing monomer conversion, and their number‐average molecular weights (M_n's) and polydispersity ratios (M_w/M_n's) increased considerably just before the gelation occurred. On the contrary, the vinyl contents of the polymers obtained from the oligooxyethylene‐based divinyl ethers ( O‐3 , O‐4 , O‐5 , O‐6 , and O‐8 ) decreased steeply even in the early stage of the polymerizations and almost all the pendant vinyl ether groups were consumed in the soluble polymers at the final stage of the polymerizations. The oligooxyethylene spacer units adjacent to the pendant unreacted vinyl ether groups may solvate intramolecularly with the carbocationic active center to accelerate frequent occurrence of intramolecular crosslinking reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3729–3738, 2004     

Lipid nanotubes and microtubes: experimental evidence for unsymmetrical monolayer membrane formation from unsymmetrical bolaamphiphiles

Unsymmetrical bolaamphiphiles, omega- [N-beta-D-glucopyranosylcarbamoyl] alkanoic acids, with even-numbered oligomethylene chains (12, 14, 16, 18, and 20 carbons) self-assembled in water to form lipid nano- and microtubes. The tubular assemblies were separated by centrifugation and examined by transmission electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy to study the molecular packing within the tubular membranes. The nanotubes encapsulated the staining reagent phosphotungstate, which revealed them to be hollow cylinders up to several hundred micrometers long with 30-43-nm outer diameters and 14-29-nm inner diameters. By comparing the membrane stacking periodicity obtained from powder X-ray diffraction analysis of the dehydrated tubes with the molecular packing within single crystals, we found that the nanotubes consist of an unsymmetrical monolayer lipid membrane (MLM) in which the molecules are packed in a parallel fashion. This suggests that the inner surface of the nanotubes is covered with carboxy headgroups and the outer surface with 1-glucosamide headgroups. The inner diameters of the lipid nanotubes could be controlled in the range 17.7-22.2 nm in steps of approximately 1.5 nm/two carbons by varying the oligomethylene spacer length. The microtubes had three types of molecular arrangements. The first type was a symmetrical MLM in which the molecules were packed in an antiparallel fashion. The other two types had unsymmetrical MLM stacking with head-to-head and head-to-tail motifs. Increasing the number of oligomethylene spacers stabilized the unsymmetrical MLM structure in both nano- and microtubes.     

Synthesis and Study of Antimicrobial Activity of Water-Soluble Ammonium Acylhydrazones Based on New 1,ω-Alkylenebis(isatins)

Russian Journal of General Chemistry - Alkylation of isatin with 1,ω-dihaloalkanes afforded bis(heterocycles) connected by an oligomethylene linker. The reaction of the resulting bis(isatins)...     

MNDO Calculations on [n]metacyclophanes

MNDO calculations on [n]metacyclophanes and a variety of related compounds are reported. An analysis of the strain, imposed by the oligomethylene bridge, and its distribution over the distorted benzene ring and the oligomethylene bridge is presented. The effect of strain and bending of the benzene ring on aromatic delocalization is investigated by a comparison of ΔH^o_f of the bent benzene systems with that of a correspondingly bent, but localized 1,3,5-cyclohexatriene. The results indicate that, even in the case of the highly bent [4]metacyclophane ( 1a ), localization is unfavorable by about 10 kcal/mol.     

Proton-induced fluorescence switching in novel naphthalimide-dansylamide dyads

[reaction: see text] Three novel bichromophoric dyads containing dansylamide and 1,8-naphthalimide linked by oligomethylene spacers of varying length were prepared. The fluorescent moiety can be reversibly selected by protonation/deprotonation of the dansyl residue via control of singlet-singlet energy transfer and photoinduced electron transfer, leading to a molecular optical switch with two spectrally distinguished "on" states.     

Synthesis and characterization of new ferroelectric liquid crystals containing oligomethylene spacers

Two series of ferroelectric liquid crystals containing a phenyl biphenyl carboxylate mesogenic group and oligomethylene spacers (n 3, 4, 6, 8) were synthesized and characterized. The chiral moieties are the (S)-2-methylbutoxycarbonyl and (S)-1-methylheptoxycarbonyl groups. The mesomorphic behaviours of the compounds were characterized using differential scanning calorimetry and optical polarized microscopy. Spontaneous polarization (P) of the liquid crystals was measured by an automated polarization tester over a wide temperature range. The mesomorphic properties are discussed as a function of spacer length and position of the chiral centre. It is found that the phase transition temperature decreases with increasing number of oligomethylene units. The phase behaviours of the LC with (S)-1-methylheptoxycarbonyl are more complex than those with (S)-2-methylbutoxycarbonyl, due to the flexible tail in the former. Moreover, the spontaneous polarization depends mainly on the position of the chiral centre, with Ps 15 nC cm 2 and Ps 60 123 nC cm 2 for the series s with (S)-2-methylbutoxycarbonyl and (S)-1-methylheptoxycarbonyl groups, respectively.     

Synthesis of unsymmetrical saturated or diacetylenic cationic bolaamphiphiles

This work presents the synthesis of novel unsymmetrical bolaamphiphiles bearing a sugar residue and a cationic glycine betaine moiety connected to both ends of a C₂₂ or C₃₂ oligomethylene bridging chain possessing or not a diacetylenic unit. Preliminary transmission electron microscopy (TEM) studies revealed the polymorphism of these bola lipids with regard to their self-assembled morphologies in water depending on the presence or not of the diacetylenic functionality and on alkyl chain length.     

Preparation of 1,2- and 1,4-dihydro derivatives of 6,7-dimethyl-2,3-diphenylquinoxaline via its dianion formed by reductive metallation

Treatment of 6,7-dimethyl-2,3-diphenylquinoxaline with sodium in tetrahydrofuran formed a monomeric dianion. The chemical behavior of this dianion was investigated by a variety of reagents. As the result, alkylation reactions gave 1,2-dihydro derivatives, while acylation reactions occured at 1,4-positions. Annulation of the pyrazine ring system was accomplished by treating the dianion with oligomethylene dichlorides, Cl(CH₂) _n Cl, n = 2–4.     

Synthesis and Characterization of (5′-Deoxyadenosin-5′-yl)cobalamin ( = ‘Adenosylcobalamin’) Analogues Mimicking the Transition-State Geometry of Coenzyme-B12-Dependent Rearrangements

A convergent synthesis of the five novel analogues 1a–e of (5′-deoxyadenosin-5′-yl)cobalamin ( = ‘adenosylcobalamin’) is described. The analogues 1a–e carry oligomethylene chains (C₃–C₇) inserted between the central Co-atom and the 5′-O-atom of the adenosine moiety and are thought to mimick the transition-state geometry in coenzyme- B ₁₂-catalyzed rearrangement. All five analogues were characterized by NMR, UV, and FAB mass spectrometry.     

Synthesis of carboxylated chlorophyll derivatives and their activities in dye-sensitized solar cells

Chlorophyll-a derivatives possessing a carboxy group in the substituent at the 3-position were prepared by chemical modification of methyl pyropheophorbide-d bearing the 3-formyl group via a Wittig, Barbier-type, or Knoevenagel reaction. The synthetic carboxylated chlorophyll pigments were employed as dye sensitizers for solar cells and their performances were compared in a conventional device based on a mesoporous titanium dioxide electrode and a liquid electrolyte. The solar power conversion efficiency was suppressed with an increase in the length of the oligomethylene moiety between the chlorin π-system and the carboxy group, while a corresponding π-linked ethenylene spacer enhanced the efficiency.     

Construction of Chlorosomal Rod Self‐Aggregates in the Solid State on Any Substrates from Synthetic Chlorophyll Derivatives Possessing an Oligomethylene Chain at the 17‐Propionate Residue

Chlorosomes are one of the most unique natural light‐harvesting antennas and their supramolecular nanostructures are still under debate. Chlorosomes contain bacteriochlorophyll (BChl)‐c, d and e molecules and these pigments self‐aggregate under a hydrophobic environment inside a chlorosome. The self‐aggregates are mainly constructed by the following three interactions: hydrogen bonding, coordination bonding and π–π stacking. Supramolecular nanostructures of self‐aggregated BChls have been widely investigated by spectroscopic and microscopic techniques. Model compounds of such chlorosomal BChl molecules have been synthesized and the effects of esterified long alkyl chains at the 17‐propionate residue for their self‐aggregation have been studied. Structurally simple zinc chlorophyll derivatives possessing an oligomethylene chain as the esterifying group at the 17‐propionate residue were prepared as chlorosomal BChl models. The synthetic zinc BChls self‐aggregated in nonpolar organic solvents to give precipitates. The resulting insoluble self‐aggregated solids were investigated on a variety of substrates, including hydrophobic, neutral and hydrophilic substrates, by visible absorption, circular dichroism and polarized light absorption spectroscopies, as well as atomic force, transmission electron and scanning electron microscopies. The self‐aggregates of synthetic Zn‐BChls formed rods with an approximately 5 nm diameter and wires with further elongated growth of the rods (aspect ratio >200). The diameter size was consistent with that estimated for natural chlorosomal rods in a filamentous anoxygenic phototroph, Chloroflexus aurantiacus. The supramolecular formation and stability of the rod on the examined substrates depended on the length of an oligomethylene chain at the 17‐propionate residue as well as on the surface properties. Especially, the number of the 5 nm rods on the substrates increased with an elongation of the chain.     

Effects of oligoDNA template length and sequence on binary self-assembly of a nucleotide bolaamphiphile

Templated self-assembly of nucleotide bolaamphiphile 1 (in which a 3'-phosphorylated thymidine moiety is connected to each end of a long oligomethylene chain) with a 10-, 20-, 30-, or 40-meric single-stranded oligoadenylic acid (2, 3, 4, or 5) led to the formation of right-handed helical nanofibers in 0.1x Tris/EDTA (TE) buffer solutions. The helical pitch increased as the length of the oligoadenylic acid template increased. DNA composed of oligoadenylic and oligocytidylic acid sequences (6, 7, and 8) also acted as templates to induce the formation of helical nanofiber structures. The diameter of the nanofibers remained constant (6-6.6 nm) irrespective of the template used. The binary self-assembly of 1 with 4 also produced higher-order, double-stranded nanofibers.     

Liquid Crystalline Side Chain Polysiloxanes with 4-Cyano- and 4-Alkoxy-Stilbene Mesogenic Units

Abstract

Side chain homo- and copolysiloxanes with 4-cyano- and 4-alkoxy-4′-stilbene mesogens, spaced apart from the backbone by oligomethylene segments of variable lengths, were synthesized via a hydrosilylation coupling reaction of five stilbene-containing α-olefins with four commercial poly(methylhydrosiloxane)s and poly(methyl-hydro-∞-dimethylsiloxane)s. Broad smectic phases were observed for the polysiloxanes with cyanostilbene mesogens, whereas the homologous with alkoxy-terminated stilbenes displayed only narrow mesophases in the high temperature range. Preliminary room tem-perature X-ray diffraction studies on mechanically oriented samples evidenced the occurrence of side chain crystallization, microphase separation and indicated the interdigitated smectic A nature of the mesophases.     

Preparation of 1,2- and 1,4-dihydro derivatives of 6,7-dimethyl-2,3-diphenylquinoxaline <Emphasis Type="Italic">via</Emphasis> its dianion formed by reductive metallation

Treatment of 6,7-dimethyl-2,3-diphenylquinoxaline with sodium in tetrahydrofuran formed a monomeric dianion. The chemical behavior of this dianion was investigated by a variety of reagents. As the result, alkylation reactions gave 1,2-dihydro derivatives, while acylation reactions occured at 1,4-positions. Annulation of the pyrazine ring system was accomplished by treating the dianion with oligomethylene dichlorides, Cl(CH₂) _n Cl, n = 2–4. Correspondence: Seniz Kaban, Department of Chemistry, Yildiz Technical University, Davutpasa Campus, Esenler-Istanbul 34220, Turkey.     

Metal-complexed nanofiber formation in water from dicarboxylic valylvaline bolaamphiphiles

Nanofiber formation of dipeptide-based bolaamphiphiles, bis (N-alpha-amide--valyl--valine) 1,n-alkane dicarboxylate (n=6, 8, 10, and 12) in water was analyzed by TEM, SEM, IR, and XRD. The bolaamphiphiles proved to be coordinated to divalent transition-metal cations, such as Co2+, Ni2+, Cu2+, and Zn2+, giving precipitates, colloidal dispersions (loose hydrogels), and hydrogels upon self-assembly at 23 or 70 degrees C. Longer oligomethylene chains and strong interaction between the metal cations and the carboxylate anions are responsible for the hydrogel formation. Energy-filtering transmission electron microscopy (EF-TEM) and field-emission scanning electron microscopy (EF-SEM) images revealed that the colloidal dispersions and the hydrogels consist of a large number of nanofibers with widths of 15-20 nm and lengths of several micrometers. FT-IR and powder XRD measurement supported the existence of a beta-sheet structure-based nanofibers complexing with metal cations.     

Crystal structure and conformational disorder of poly(hexamethylene terephthalate)

Packing polymorphism and conformational disorder of poly(hexamethylene terephthalate) were analyzed by x-ray diffraction technique. The measurements were performed in the temperature range from 20 to 135°C. At high temperature, several unassignable reflections were found to disappear, and all reflections were satisfactorily indexed by single-chain unit cell. The crystal structures of β form (135°C) and β form (20°C) were similarly triclinic. The β′ unit cell assumed the double b-axis dimension, and the centrosymmetric conformations of the two chains adjacent along the b-axis differed in the orientation of the phenylene rings. At the elevated temperature (β form), the chains were indistinguishable by x-ray diffraction owing to the ring-flipping motion. The β and β′ structures were different in the local conformational disorder around the terephthaloyl groups. Conformational polymorphism of homologous poly(oligomethylene terephthalate)s was considered to originate from the difference in bulkiness of the aromatic and aliphatic residues. © 1996 John Wiley & Sons, Inc.     

Molecular Flexibility and Bend in Semi-Rigid Liquid Crystals: Implications for the Heliconical Nematic Ground State

The N_TB phase phases possess a local helical structure with a pitch length of a few nanometers and is typically exhibited by materials consisting of two rigid mesogenic units linked by a flexible oligomethylene spacer of odd parity, giving a bent shape. We report the synthesis and characterisation of two novel dimeric liquid crystals, and perform a computational study on 10 cyanobiphenyl dimers with varying linking groups, generating a large library of conformers for each compound; this allows us to present molecular bend angles as probability weighted averages of many conformers, rather than use a single conformer. We validate conformer libraries by comparison of interproton distances with those obtained from solution-based 1D ¹H NOESY NMR, finding good agreement between experiment and computational work. Conversely, we find that using any single conformer fails to reproduce experimental interproton distances. We find the use of a single conformer significantly overestimates the molecular bend angle while also ignoring flexibility; in addition, we show that the average bend angle and flexibility are both linked to the relative stability of the N_TB phase.     

Efficient macrocyclization using methylene-tethered terminal dienes and bis(manganese(III)-enolate)s

Macrocyclic compounds, which have two fused dihydrofuran rings, were synthesized with complete control by the oxidation of α,α,ω,ω-tetraaryl-α,(ω-1)-alkadienes 1_x with manganese(III)-oligomethylenebis(enolate) complexes directly formed by the reaction of the oligomethylene bis(3-oxobutanoate)s 2_y with manganese(III) acetate in situ. The oxamethylene-tethered macrodiolides 5 and 7 were also produced in good to moderate yields by a similar oxidation. The key intermediate, an electron donor-acceptor-like complex, was proposed for the efficient macrocyclization reaction.