Conjugates of Antibody‐Targeted PEG Multiblock Polymers with Doxorubicin in Cancer Therapy

The synthesis and physico‐chemical characterisation of biodegradable multiblock polymer drug carriers based on poly(ethylene glycol) (PEG) are described. The blocks of PEG ( = 2 000) are interconnected by an enzymatically degradable tripeptide derivative consisting of one Lys and two Glu residues. An anticancer drug, doxorubicin (Dox), was attached to the polymer carrier by a Gly‐Phe‐Leu‐Gly tetrapeptide spacer, which is also susceptible to degradation by lysosomal enzymes. A targeting polyclonal antibody was covalently linked to the polymer‐Dox conjugate by the aminolytic reaction of reactive sulfosuccinimidyl ester groups of the polymer with the protein. The resulting antibody‐polymer‐drug conjugates were characterised by SEC, UV/VIS spectrophotometry and amino acid analysis. Although the studied polymers show only a moderate antiproliferative activity against concanavalin A‐stimulated murine splenocytes and a murine T‐cell EL 4 lymphoma in vitro, they exhibited significant antitumour efficiency against murine T‐cell EL 4 lymphoma in vivo.

     

Studying and Suppressing Olefin Isomerization Side Reactions During ADMET Polymerizations

Olefin isomerization side reactions that occur during ADMET polymerizations were studied by preparing polyesters via ADMET and subsequently degrading these polyesters via transesterification with methanol. The resulting diesters, representing the repeating units of the previously prepared polyesters, were then analyzed by GC‐MS. This strategy allowed quantification of the amount of olefin isomerization that took place during ADMET polymerization with second generation ruthenium metathesis catalysts. In a second step, it was shown that the addition of benzoquinone to the polymerization mixture prevented the olefin isomerization. Therefore, second generation ruthenium metathesis catalysts may now be used for the preparation of well‐defined polymers via ADMET with very little isomerization, which was not possible before.

     

Optical Non‐Linearity from Montmorillonite Intercalated with a Chromophore‐Containing Dendritic Structure: A Self‐Assembly Approach

Chromophore‐containing dendritic structures (G1, G2) are utilized to intercalate layered silicates, which results in a large d‐spacing up to 126 Å. An exfoliated morphology is obtained by mixing the dendritic structure intercalated layered silicates with polyimide in N,N‐dimethylacetamide solution. The dendritic structures attached on the clay template would arrange in a non‐centrosymmetric manner. This self‐assembled arrangement brought about the electro‐optical coefficients of 5–6 pm · V⁻¹ for these relatively low chromophore‐containing organic/inorganic nanocomposites without resorting to poling. Excellent temporal stability (100 °C) is also achieved.

     

Facile Fabrication of Functional Polypyrrole Nanotubes via a Reactive Self‐Degraded Template

Summary: Polypyrrole nanotubes with high electric conductivity and azo function have been fabricated in high yield via an in‐situ polymerization. During the process fibrillar complex of FeCl₃ and methyl orange (MO), acting as a reactive self‐degraded template, directed the growth of polypyrrole on its surface and promoted the assembly into hollow nanotubular structures.

TEM image of uncompleted PPy nanotubes synthesized in MO solutions after reaction for 40 min.     

Water‐Soluble Carbon Nanotubes by Redox Radical Polymerization

Water‐soluble single‐ and multi‐walled carbon nanotubes (CNTs) were prepared by grafting polyacrylamide chains from the graphitic surface via ceric ion‐induced redox radical polymerization. The reducing functionalities were covalently attached to the tubes by peroxide‐assisted radical reaction. The results showed that polymer chains were grafted onto CNTs by the redox process. The redox radical polymerization initiated by carbon nanotube‐bearing functionalities not only provides a powerful strategy for modifying the carbon nanostructures but also gives us the knowledge of their sidewall chemistry.

     

Effect of Gold Nanoparticles on the Thermosensitivity,Morphology, and Optical Properties of Poly(acrylamide–acrylic acid) Microgels

Novel positive thermosensitive microgels of poly(acrylamide–acrylic acid) with embedded gold nanoparticles have been synthesized and characterized by means of dynamic light scattering, UV‐vis spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. These systems show temperature (upper critical solution temperature‐like volume phase transition) and optical responsiveness making them externally triggered systems.

     

Fabrication and Characterization of an Organic‐Inorganic Gradient Surface made by Polymethylsilsesquioxane (PMSQ)

Summary: A simple method for the fabrication of a chemical composition gradient from organic to inorganic by the pyrolysis of a polymethylsilsesquioxane (PMSQ) thin film in a gradient temperature field is reported. The resultant chemical gradient surface demonstrates gradual changes in wettability, and slight microstructural changes are observed along the substrate.

FT‐IR spectra of gradient PMSQ surface along the length from the unheated side to the heated side.     

Nanosized‐Silica‐Reinforced Holographic Polymer‐Dispersed Liquid Crystals

Summary: Nanosized silicas added to holographic polymer‐dispersed liquid crystals (HPDLC) provide the resin phase with increased elasticity, dimensional stability, and the high diffraction efficiency of the gratings. On the other hand, nucleation and growth of periodic modulation are delayed, especially with small‐sized silica because of the increased viscosity of the resin mixture. Effects of the LC/resin composition and cell gap on the diffraction efficiency have also been studied.

AFM image of silica added HPDLC.     

Engineering Polymer Informatics: Towards the Computer‐Aided Design of Polymers

The computer‐aided design of polymers is one of the holy grails of modern chemical informatics and of significant interest for a number of communities in polymer science. This paper outlines a vision for the in silico design of polymers and presents an information model based on modern semantic web technologies, thus laying the foundations for achieving the vision.

     

Preparation of Hybrid Microgels Functionalized by Silver Nanoparticles

Summary: Hybrid microgels functionalized with silver nanoparticles (AgNP) have been prepared and their physico‐chemical properties examined. Composite particles have been obtained by formation of AgNP in presence of poly[vinylcaprolactam‐co‐(acetoacetoxyethyl methacrylate)] (VCL/AAEM) microgel particles. It has been demonstrated that hybrid particles with different AgNP amounts can be prepared. Hybrid particles are sensitive to temperature and swelling, and collapse processes are reversible. Incorporation of AgNP leads to shrinkage of microgel template due to the partial immobilization of polymer chains on the microgel surface. As a consequence, gradual loss of temperature sensitivity is observed. Hybrid microgels form highly transparent well‐organized films on solid substrates, providing homogeneous distribution of AgNP in bulk material. Presence of AgNP increases considerably the thermal stability of composite films.

Schematic representation (left) and TEM image (right) of hybrid microgels containing silver nanoparticles (AgNP).     

A Polydiacetylene Supramolecular System That Emits Red,Green, and Blue Fluorescence

A polymer system based on polydiacetylene (PDA) supramolecules that emits red, green, and blue fluorescence has been constructed. The three‐color emitting system is comprised of red‐fluorescent PDA vesicles in which green‐fluorescent fluorescein molecules are encapsulated. Finally, the blue‐fluorescence component is introduced by reacting terminal amine groups on the PDA vesicle surfaces with fluorescamine. Thin PDA‐polymer‐containing poly(vinyl alcohol) films formed by using this strategy display red, green, and blue fluorescence upon excitation with light at specific wavelengths.

     

Polyaniline Microspheres Consisting of Highly Crystallized Nanorods

The preparation of self‐assembled polyaniline (PANi) microspheres via facile interfacial oxidation polymerization of aniline in the presence of DL ‐tartaric acid dopant is reported. Compared with PANis reported in the literature, the PANi prepared in this study exhibits a nanorod‐bundle morphology with exceptionally high crystallinity. These nanorods or nanorod bundles can self‐assemble into microspheres with unique alignment. The chemistry, morphology, and crystal structure of DL ‐tartaric acid doped microspheres were studied using SEM, TEM, SAED, XRD, and FTIR.

     

A novel one‐pot oxidative deformylation of N‐formyldihydroquinolines employing ferric chloride hexahydrate. Synthesis of 4‐chloro‐2‐phenylquinolines and 4‐chloro‐2‐(1,3‐diphenyl‐1H‐pyrazol‐4‐yl)quinolines

A novel versatile one‐pot oxidative deformylation approach has been developed to synthesize 4‐chloro‐2‐phenylquinolines and 4‐chloro‐2‐(1,3‐diphenyl‐1H‐pyrazol‐4‐yl)quinolines from the corresponding N‐formyldihydroquinolines.     

Structural changes in polymers of diethyl succinylsuccinate(1,4-diethoxycarbonyl-2,5-dihydroxy-1,4-cyclohexadiene) with diamines at high temperatures

The structural changes of the polymers having the following structures: at high temperatures were studied by the spectroscopic and thermal analysis. When the polymers were heated in air, they were oxidized predominantly to polymers having the structure: The rate of oxidation was fast and the reaction was almost completed within 2 hr at 180°C. In the case of polymer 3, an intramolecular cyclization to form acridone was detected as a minor reaction.     

RIS Model of the Helix‐Kink Conformation of Erythro Diisotactic Polynobornene

Computer simulations reveal the unique conformation of or erythro diisotactic polynorbornene, a polymer with numerous important applications in microelectronics. While previous simulations suggested that this polymer adopts a helix‐kink morphology, the results presented herein indicate that the reversal of the helix symmetry is the origin of such kinks which cause a transition from a rigid‐rod conformation to a random coil with increasing molecular weight. An RIS model was developed that accurately predicts the unique conformation of this polymer. This model predicts a rigid‐rod helical conformation that eventually transitions to a random coil at a degree of polymerization of approximately 500.

     

A Novel Approach for Incorporation of Mono‐Functional Bioactive Phenols into Polyanhydrides

Antiseptics based on phenol and phenolic derivatives were chemically incorporated into polyanhydrides as pendant groups via ester linkages. Polyanhydrides with antiseptic loadings of 46–58 wt.‐% were obtained with molecular weights ranging from 9 400–23 000. In general, polymers with the bulkier antiseptics were more difficult to polymerize and yielded lower molecular weights. All polyanhydrides were amorphous with glass transition temperatures ranging from 27–58 °C. Polymers were deemed noncytotoxic after culturing L929 mouse fibroblast cells in media containing the polymers at two concentrations (0.10 and 0.01 mg · mL⁻¹) over three days. In summary, mono‐functional bioactives can be chemically incorporated into noncytotoxic polyanhydrides.