铂微粒弥散的聚2，5－二甲氧基苯胺膜电极在甲醇电氧化中的催化行为

研究了电化学方法制备的铂微粒弥散的聚２，５－二甲氧基苯胺膜电极对甲醇电氧化的催化行为以及影响催化活性的主要因素。以ＸＰＳ、ＳＥＭ表征了这种电极材料的表面结构，结果表明，在酸性介质中，该膜电极对甲醇电氧化有高的催化活性和稳定性。     

聚2，5-二甲氧基苯胺的合成与表征

报导了聚2，5-二甲氧基苯胺（P25DMAn）的化学与电化学合成，并用元素分析、FTIR、UV－VIS吸收光谱、电导率测定以及电化学等手段对该聚合物进行了表征．P25DMAn类似聚苯胺（PAn）的结构，是由其单体通过氮原子N在对位上键合而成.P25DMAn是一种能溶于多种有机溶剂如THF、CH2Cl2、CHCl3、DMSO、DMF等．并具有极好的环境稳定性，优良的电活性和相当高的电导率的高聚物．因此，P25DMAn是一种很有应用前景的新的导电高聚物．     

Chemical and biological studies on dihydro-s-triazines. XVII. Modifications of the three-component synthesis favoring the formation of 2-guanidino-4-methylquinazoline byproducts

A modified three-component reaction of arylamines, cyanoguanidine, and acetone is described, wherein formation of anomalous guanidinoquinazoline byproducts is greatly enhanced at the expense of the normal dihydro-s-triazines. Four new guanidinoquinazolines and four new dihydro-s-triazines were synthesized via this modification, starting from 2,4-, 2,5-, 3,4-, and 3,5-dimethoxyaniline. The guanidinoquinazoline to dihydro-s-triazine ratio was much higher with 3,4- and 3,5-dimethoxyaniline than with 2,4-dimethoxyaniline. 2,5-Dimethoxyaniline gave an unexpectedly low yield of guanidinoquinazoline, apparently because of steric hindrance. The modified three-component synthesis was also examined in detail with 2-naphthylamine.     

L-丙烯酸薄荷酯与2,5-二(4'-己氧基苯基)苯乙烯无规共聚物的合成和旋光性质

通过自由基共聚合制备了一系列L-丙烯酸薄荷酯( L-MtA)与2,5-二(4'-己氧基苯基)苯乙烯(BHPSt)的共聚物L-MtA(x)-co-BHPSt(1-x).利用UV-Vis和1H-NMR光谱表征了共聚物的组成,根据Kelen-Tüd(o)s (K-T)方法计算得到的L-MtA和BHPSt的竞聚率分别为0.36...     

Synthesis and characterization of poly(benzazoles) containing the bicyclo[2.2.2]octane moiety

Poly(benzobisoxazoles) (PBOs), poly(benzobisthiazoles) (PBTs) and copolymers thereof containing the 2,5-dihydroxybicyclo[2.2.2]octane moiety have been prepared and studied. The homopolymers were synthesized by the polycondensation of 2,5-dihydroxybicyclo[2.2.2]octane-1,4-dicarboxylic acid with 4,6-diamino-1,3-benzenediol dihydrochloride or 2,5-diamino-1,4-benzenedithiol dihydrochloride in poly(phosphoric acid). Random and block copolymers (PBO–PBT) were also prepared. The polymers were characterized by solubility, X-ray diffraction, spectroscopy (infrared and solid-state ¹³C nuclear magnetic resonance), and thermal analysis such as differential scanning calorimetry and thermogravimetric analysis. Thermogravimetric analysis showed thermal stability of the polymers above 375°C in air and under argon atmosphere. The polymers exhibited high resistance to organic and inorganic solvents. The polymers were converted to the more stable aromatic polymers via dehydration and retro Diels–Alder reactions of the 2,5-dihydroxybicyclo[2.2.2]octyl moiety by pyrolysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 277–281, 1998     

Biobased poly(2,5‐furandimethylene succinate‐co‐butylene succinate) crosslinked by reversible Diels–Alder reaction

We synthesized biobased poly(2,5‐furandimethylene succinate‐co‐butylene succinate) [P(FS‐co‐BS)] copolymers by polycondensation of 2,5‐bis(hydroxymethyl)furan, 1,4‐butanediol, and succinic acid. These copolymers could be crosslinked to form network polymers by means of a reversible Diels–Alder reaction with bis‐maleimide. The thermal properties, mechanical properties, and healing abilities of the P(FS‐co‐BS)s and the network polymers were investigated. The mechanical properties of the network polymers depended on the comonomer composition of the P(FS‐co‐BS)s and the maleimide/furan ratio in the network polymers. Some of the copolymers exhibited healing ability at room temperature, and their healing efficiency was enhanced by solvent or heat. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 216–222     

Macroreticular redox polymers. II. Further synthesis and properties of some redox polymers

A series of redox polymers was prepared by the addition of different redox groups to preformed, chloromethylated macroreticular styrene–divinylbenzene copolymers. These polymers contained the hydroquinone, hydroquinonesulfonic acid, methylhydroquinone, 2,5-dimethylhydroquinone, 2,5-dimethylhydroquinonesulfonic acid, 2,3,5-trimethylhydroquinone, tert-butylhydroquinone, chlorohydroquinone, benzyl mercaptan, anthraquinone, and the pyrogallol redox groups. Thus, a set of redox polymers is available having redox potentials that may range from approximately 150 to 700 mv.     

Synthesis and properties of poly(heteroaryleneethynylene)s consisting of electron‐accepting benzothiadiazole/quinoxaline units and electron‐donating alkyl thiophene units

Low‐band‐gap π‐conjugated polymers composed of π‐excessive thiophene and π‐deficient benzothiadiazole and quinoxaline units were prepared in high yields by a polycondensation method using palladium cross‐coupling reactions of alkylthiophene diacetylenes, 4,7‐dibromo‐2,1,3‐benzothiadiazole, and 5,8‐dibromo‐2,3‐dipyridine‐2‐ylquinoxaline. The copolymers were characterized by NMR, IR, UV, gel permeation chromatography, and elemental analysis. High‐molecular‐weight (weight‐average molecular weight up to 82,600 g/mol), thermostable, soluble, and film‐forming materials were obtained. The polymers were photoluminescent in chloroform and showed metallic luster in the solid state. The absorption and emission in solution and in the solid state of the polymers revealed that the polymers generated a π‐stacked structure in the solid state, and the polymer molecules in the film were ordered. Thin films of poly[3‐dodecylthiophen‐2,5‐diylethynylene‐(benzo[1,2,5]thiadiazole‐4,7‐diyl)ethynylene] ( P‐1 ), poly[3,4‐di dodecylthiophen‐2,5‐diylethynylene‐(benzo[1,2,5]thiadiazole‐4,7‐diyl)ethynylene] ( P‐2 ), poly[3‐dodecylthiophene‐2,5‐diylethynylene‐(2,3‐dipyridine‐2‐ylquinoxaline‐5,8‐diyl)ethynylene] ( P‐3 ), and poly[3,4‐didodecylthiophene‐2,5‐diylethynylene‐(2,3‐dipyridine‐2‐ylquinoxaline‐5,8‐diyl)‐ethynylene] ( P‐4 ) exhibited an optical band gap of ～1.85–2.08 eV. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the polymers were determined from electrochemical measurements. In the absorption and emission spectra of these polymers in chloroform/methanol mixtures, all the polymers revealed solvatochromic effects, which were related to the formation of aggregates, as confirmed by temperature‐dependence absorption investigations. The absorption spectra of P‐2 and P‐4 at different temperatures also revealed significant effects of the structure on the molecular interactions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6445–6454, 2005     

含噻吩单元的硅芴共聚物的合成及其蓝色电致发光性能

将少量(摩尔分数为1%—3％)含噻吩的窄带隙单体和宽带隙硅芴单体进行共聚, 合成了聚{9,9-二己基-3,6-硅芴-co-[2,5-二(2-甲基苯撑-4-基)-噻吩]}和聚{9,9-二己基-3,6-硅芴-co-[2,5-二(2-苯撑-4-基)-噻吩]}两类硅芴共聚物, 通过紫外-可见吸收光谱、光致发光光谱, 并制作聚合物发光二极管器件测试电致发光光谱等手段, 系统表征了两类硅芴共聚物材料的性能. 实验结果表明, 噻吩的加入形成了新的蓝色发光中心, 并且实现了从硅芴链段到含噻吩发光中心的有效能量转移. 通过增加发光中心结构的空间位阻来减小其共轭程度, 可以使聚合物的PL和EL光谱发生较大蓝移. 最终得到了效率为0.46%和色坐标(CIE)为(0.19, 0.16)的蓝光LED器件.     

Nuclear magnetic resonance studies on microstructure of ethylene copolymers. VII. Proton resonance spectra of hydrolyzed ethylene–vinyl acetate copolymers1

Complete and partial alcoholyses of ethylene–vinyl acetate (E–VA) copolymers yield ethylene–vinyl alcohol (E–VOH) copolymers and ethylene–vinyl acetate–vinyl alcohol (E–VA–VOH) terpolymers, respectively. From the 220-MHz proton NMR spectra of E–VOH copolymers the stereoregular and chemical sequence distributions of the comonomers can be readily determined. Partially hydrolyzed E–VA polymers were acetylated with perdeuterated acetic anhydride. The monomer distributions in the terpolymers were then quantitatively determined by examining the proton spectra of the derived products. It was found that alcoholysis of E–VA polymers occurs preferentially at VA units which have neighboring VA groups.     

Intrachain triplet energy transfer in platinum-acetylide copolymers

A series of platinum-acetylide homo- and copolymers was prepared and characterized by using photophysical methods. The polymers feature repeat units of the type [trans-Pt(PBu3)2(-CC-Ar-CC-)], where Ar = 1,4-phenylene (P) or 2,5-thienylene (T). The properties of homopolymers that contain only the 1,4-phenylene or 2,5-thienylene repeat units were compared with those of random copolymers having the structure -[-(Pt(PBu3)2(-CC-T-CC-))x-(Pt(PBu3)2(-CC-P-CC-))(1-x)-)] where x = 0.05, 0.15, and 0.25. Absorption and photoluminescence spectroscopy demonstrates that the singlet and triplet excitations localized on 1,4-phenylene units are higher in energy relative to those localized on the 2,5-thienylene units. The mechanism and dynamics of intrachain triplet energy transfer from 1,4-phenylene to the 2,5-thienylene repeats were explored in the copolymers. Photoluminescence and nanosecond transient absorption spectroscopy indicate that at room temperature P --> T energy transfer is efficient and rapid (k > 10(8) s(-1)), even in the copolymer that contains only 5% 2,5-thienylene repeat units. At 77 K, steady-state and time-resolved photoluminescence spectroscopy reveals that triplet energy transfer is much less efficient and a fraction of the triplet excitations is "trapped" on the high-energy 1,4-phenylene units. Intrachain energy transfer is believed to occur by two mechanisms, one involving P --> T singlet energy transfer followed by intersystem crossing, whereas the other involves intersystem crossing prior to P --> T triplet energy transfer. The relationship between the observed energy transfer efficiencies and mechanisms in the copolymers is discussed.     

导电高聚物聚2，5－二甲基苯胺的化学合成与特性

报道了聚２，５－二甲基苯胺（ＰＤＭｅＡｎ）的化学合成，并用标准四探针方法测定其电导率，以ＦＴＩＲ、ＵＶ－Ｖｉｓ吸收光谱、元素分析和ＣＶ法对其性质进行了研究，ＰＤＭｅＡｎ的结构与聚苯胺和聚２，５－二甲氧基苯胺的结构类似，是由其单元通过氮原子（Ｎ）在对位上键合而成，本征态的ＰＤＭｅＡｎ能溶于多种有机溶剂，如ＣＨ２Ｃｌ２、ＣＨＣｌ３、ＤＭＳＯ、ＤＭＦ等。     

Fabrication and in vitro drug release study of microsphere drug delivery systems based on amphiphilic poly-alpha,beta-[N-(2-hydroxyethyl)-L-aspartamide]-g-poly(L-lactide) graft copolymers

Biodegradable amphiphilic graft copolymers with different compositions were synthesized by grafting poly(L-lactide) (PLLA) sequences onto a water-soluble poly-alpha,beta-[N-(2-hydroxyethyl)-L-aspartamide] (PHEA) backbone. The critical micelle concentration (CMC) of the graft polymers was determined by fluorescence probe technique. Using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, the graft polymers were proved to have low cytotoxicity. Based on the specific physicochemical property of the graft copolymers, submicron sized microsphere drug delivery systems were prepared by a very convenient "ultrasonic dispersion method", which did not involve toxic organic solvents. The drug-loaded microspheres had a regular spherical shape with a narrow size distribution. A hydrophobic drug, prednisone acetate, was encapsulated into polymeric microspheres and the in vitro drug release was studied.     

氧化偶联共聚合制备主链含β-萘烷基醚的红色发光聚合物

用氧化偶联聚合法合成了主链上含β-萘烷基醚和吡啶、二烷基芴、二苯乙烯和均四甲苯的聚合物.用FT-IR和1H NMR表征了聚合物的结构.广角X射线衍射表明共聚物的结构都是非晶态的.用UV-V is表征了共聚物的吸收特征.聚合物的荧光光谱表明,含有β-萘烷基醚和吡啶的聚合物在溶液中表现为红光发射材料.含有β-萘甲醚和二苯乙烯的共聚物为黄橙光发射,通过改变单体含量也可实现红光发射.含有β-萘甲醚和二烷基芴的聚合物固体有望成为白光发射材料.     

Regioregular copolymers of 3-alkoxythiophene and their photovoltaic application

Low band gap conjugated polymers with proper energy levels for charge transfer are required to achieve high-efficiency polymer solar cells. We report the synthesis and characterization of two new regioregular copolymers that are based on 3-alkoxythiophene monomers: poly(3-octylthiophene-2,5-diyl-co-3-decyloxythiophene-2,5-diyl) (POT-co-DOT) and poly{(9,9-dioctylfluorene)-2,7-diyl-alt-[4,7-bis(3-decyloxythien-2-yl)-2,1,3-benzothiadiazole]-5',5' '-diyl} (PF-co-DTB). Compared to the alkyl substituents, the alkoxy side chains on the thiophene units can effectively lower the band gap of copolymers and enhance the charge transfer to electron acceptors such as (6,6)-phenyl C(61)-butyric acid methyl ester (PCBM). The chemical structure and regioregularity of the copolymers were confirmed by NMR. Both copolymers are readily soluble in organic solvents and form high-quality thin films. Electrochemical and photophysical studies reveal band gaps of 1.64 eV for POT-co-DOT and 1.78 eV for PF-co-DTB. Bulk heterojunction photovoltaic devices were fabricated using blends of these copolymers with PCBM as the active layer, ITO-glass as the anode, and aluminum as the cathode. Power conversion efficiency of 1.6% was obtained under simulated solar light AM 1.5 G (100 mW/cm(2)) from a solar cell with an active layer containing 20 wt % PF-co-DTB and 80 wt % PCBM. Regioregular poly(3-decyloxythiophene-2,5-diyl) (P3DOT) was also studied for comparison purposes.     

Some aspects of the synthesis and characterization of special polymers and oligomers by olefin metathesis

Homopolymers of 2-norbornene and 2,3-bis(trifluoromethyl)-2,5-norbornadiene and copolymers of these bicyclic olefins with 1,5-cyclooctadiene and cyclopentene were prepared via ring opening metathesis polymerization. The molecular weight distributions of the polymers were estimated by gel permeation chromatography.The polymers were degraded in a cross metathesis reaction with E-4-octene; only poly[2,3-bis(trifluoromethyl)-2,5-norbornadiene] was not degradable.All reactions were carried out with WCl₆/(CH₃)₄Sn as the catalyst system. The low molecular cyclic oligomers in the polymerization mixtures and the degradation products were analyzed by gas chromatography and identified using a gas chromatography/mass spectrometry coupling.The degradation experiments show reactivity differences for the double bonds situated in the polymer backbone. On the basis of these differences and the fact that this is the first time that a metathesis degradation of such polymers has been reported, the consequences on the ring opening metathesis copolymerization of cycloolefins are discussed in general terms, leading to some new aspects in the planning of the synthesis of special copolymers and oligomers.With reference to a lecture presented at the 4th International Symposium on Olefin Metathesis (ISOM 4), Belfast, 1–4 Sept. 1981.     

Synthesis and characterization of allyl functionalized poly(α-hydroxy)acids and their further dihydroxylation and epoxidation

In this study, the synthesis of an allyl functionalized aliphatic polyester and the subsequent oxidation of the double bonds was investigated. Allylglycolide (3-allyl-1,4-dioxane-2,5-dione) was synthesized and its homopolymer and copolymers with l-lactide were prepared by ring opening polymerization in the melt using benzyl alcohol and SnOct₂ as initiator and catalyst, respectively. The polymerizations proceeded with high yields and conversions and good control over molecular weights and copolymer composition. The obtained polymers were amorphous materials and their T_g increased with increasing lactide content. Dihydroxylation of the double bonds in poly(allylglycolide) and copolymers with lactide was attempted with osmiumtetroxide/4-methylmorpholine-4-oxide (OsO₄/NMO). However, particularly the polymers rich in allylglycolide could not be isolated after dihydroxylation because they likely underwent degradation during workup. Optimizing the reaction conditions gave partially dihydroxylated copolymers only for copolymers with high lactide content (50 and 75 mol%) with a conversion of the double bonds of only ∼60%. GPC analysis showed that chain scission had occurred during the dihydroxylation reaction and/or workup.The allyl groups of poly(allylglycolide) homopolymers and copolymers with lactide were oxidized using m-chloroperoxy benzoic acid (mCPBA) to yield the corresponding epoxidated polymers in high yield. NMR analysis showed that conversion of the double bonds to epoxides was quantitative, whereas GPC analysis showed that the epoxidation was not associated with chain scission. All epoxidated polymers were amorphous materials with a T_g depending on the composition.     

The Copolymers of N-alkyl Carbazole and Stilbene Prepared by Oxidative-coupling reaction

Electroluminescence (EL) polymers have attracted extensive investigation in the world.Poly (p-phenylene vinylene) (PPV) and its derivatives are well studied due to theirapplications as active components for light-emitting diode (LED)'. Various syntheticmethods, such as Witting reaction ', Heck reaction ', and Wessling reaction 4 weredeveloped to prepare PPVs. But there are still some drawbacks to need to be improved,such as complicated synthetic routes, low yields, gelation, Iuminescence…     

Photolysis and emission spectra of substituted polyacrylophenones

Poly-[3′,4′-dimethoxyacrylophenone], poly-4′-phenylacrylophenone, poly-2′-acrylonaphthone and copolymers of acrylophenone monomers with styrene and methyl methacrylate were prepared. Quantum yields of main chain scission in chlorobenzene by 313 nm radiation were 10³ times lower for all homopolymers and copolymers studied than for polyacrylophenone. The emission spectra of the polymers, copolymers and model compounds were taken for films at 77 K. The 3′,4′-dimethoxyacrylophenone, 4′-phenylacrylophenone and 2′-acrylonaphthone structural units exhibited poorly resolved emission spectra in homopolymer, copolymer and model compound. No difference in the emission spectra of films and dispersed homopolymer or copolymer in a poly(methyl methacrylate) matrix was observed. The decay of the emission of all homopolymers and copolymers under study was exponential, the life-time exceeding 0.20 sec.     

Alternating copolymers of propylene and alkyl acrylates

High-molecular-weight alternating and acrylate-rich copolymers of propylene and ethyl acrylate were prepared by using boron trifluoride to complex the acrylate ester. The polymerizations were run at room temperature and autogeneous pressures with free-radical initiation. The polymers were characterized by their nuclear magnetic resonance (NMR) and infrared (IR) spectra, differential scanning calorimetry, and gel permeation chromatography. The proton and ¹³C NMR spectra show that the equimolar copolymers are alternating to a high degree.