| 烧结温度对(Ba0.85Ca0.15)(Ti0.9Hf0.1)O3陶瓷压电性能的影响 |
| |
| 引用本文： | 许文君,梁进闯,周恒为,黄以能,陈云飞,尹红梅.烧结温度对(Ba0.85Ca0.15)(Ti0.9Hf0.1)O3陶瓷压电性能的影响[J].人工晶体学报,2019,48(5):955-960. |
| |
| 作者姓名： | 许文君 梁进闯 周恒为 黄以能 陈云飞 尹红梅 |
| |
| 作者单位： | 伊犁师范学院物理科学与技术学院,新疆凝聚态相变与微结构实验室,伊宁 835000;伊犁师范学院物理科学与技术学院,新疆凝聚态相变与微结构实验室,伊宁 835000;南京大学物理学院,国家固体微结构重点实验室,南京 210093 |
| |
| 基金项目： | 自治区研究生科研创新项目(YLSF2017003);伊犁师范学院科研项目(2016YSY022);新疆维吾尔自治区普通高校重点学科开放课题(XJZDXK-phy201809) |
| |
| 摘 要： | 采用传统固相反应法在系列烧结温度下制备了(Ba0.85Ca0.15)(Ti0.9Hf0.1)O3无铅压电陶瓷,并对陶瓷样品的晶格结构、表面形貌、铁电性能、压电性能和常温介电性能进行了测试与分析。结果表明:样品均具有纯的钙钛矿结构,随着烧结温度的升高,样品的晶体结构由立方相转变为四方相;压电系数和机电耦合系数随之增大,当烧结温度为1340℃时,样品的晶粒尺寸较为均匀,约为2~7μm,并且样品压电系数最大为250pC·N^-1,此时,2Pr=13.33μC·cm^-2,2Ec=5.91kV·cm^-1,i=0.05mA,ε=1803,tanδ≈0.017,Kp=0.32,Qm=116。
|
| 关 键 词： | 压电陶瓷 压电性能 固相反应法 烧结温度 |
Effect of Sintering Temperature on Piezoelectric Properties of ( Ba0. 85 Ca0. 15 ) ( Ti0. 9 Hf0. 1 ) O3 Ceramics |
| |
| XU Wen-jun,LIANG Jin-chuang,ZHOU Heng-wei,HUANG Yi-neng,CHEN Yun-fei,YIN Hong-mei.Effect of Sintering Temperature on Piezoelectric Properties of ( Ba0. 85 Ca0. 15 ) ( Ti0. 9 Hf0. 1 ) O3 Ceramics[J].Journal of Synthetic Crystals,2019,48(5):955-960. |
| |
| Authors: | XU Wen-jun LIANG Jin-chuang ZHOU Heng-wei HUANG Yi-neng CHEN Yun-fei YIN Hong-mei |
| |
| Affiliation: | (Xinjiang Laboratory of Phase Transitions and Microstructures in Condensed Matter Physics,College of Physical Science and Technology,Yili Normal University,Yining 835000,China;National Lab of Solid State Microstructures,School of Physics,Nanjing University,Nanjing 210093,China) |
| |
| Abstract: | Lead-free (Ba0.85Ca0.15)(Ti0.9Hf0.1)O3 piezoelectric ceramics were prepared by traditional solid state reaction method at different sintering temperature and the crystal structure,surface morphology,ferroelectric,piezoelectric and room temperature dielectric properties of ceramic samples were tested and analyzed.The results show that all the samples possess a pure perovskite phase structure,the phase structure of the sample change from cubic phase to tetragonal phase and the piezoelectric constant and the electromechanical coupling coefficient increase with increased sintering temperature;The grain size is relatively uniform of the (Ba0.85Ca0.15)(Ti0.9Hf0.1)O3 ceramics sintered at 1340 ℃ degree,about 2~7 μm,and it exhibit optimal piezoelectric properties. d33 =250 pC·N^-1 ,2Pr =13.33 μC·cm^-2 ,2Ec =5.91 kV·cm^-1 , i =0.05 mA,ε=1803,tanδ≈0.017, Kp=0.32, Qm=116. |
| |
| Keywords: | piezoelectric ceramics piezoelectric property solid state reaction method sintering temperature |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《人工晶体学报》浏览原始摘要信息 |
|
点击此处可从《人工晶体学报》下载全文 |
|
