首页 | 官方网站   微博 | 高级检索  
     

爆炸载荷作用下加筋板的失效模式分析及结构优化设计
引用本文:侯海量,朱锡,古美邦.爆炸载荷作用下加筋板的失效模式分析及结构优化设计[J].爆炸与冲击,2007,27(1):26-33.
作者姓名:侯海量  朱锡  古美邦
作者单位:1.海军工程大学船舶与动力学院,湖北 武汉 430033;
摘    要:通过对爆炸载荷下具有1根加强筋的固支矩形加筋板的有限元模拟,探讨了抗爆加筋板结构优化设计方法,分析了加筋板的失效模式以及加强筋相对刚度和冲击载荷强度对加筋板失效模式的影响,指出了失效模式Ⅰ下的3种变形模态以及失效模式Ⅱ下的2种子失效模式,得到了失效模式Ⅰ下加强筋和加筋板最大挠度的近似计算公式,提出了单根加筋板的两种失效模式的判别条件,并对具有1根加强筋的固支矩形加筋板抗爆结构进行了优化设计。结果表明,通过数值模拟或模型实验可以求得任意加筋板结构由发生塑性大变形到发生破损的临界条件,从而确定抗爆性能最强时加筋板的质量与加强筋横截面尺寸及间距间的关系,实现对抗爆加筋板结构的优化设计。

关 键 词:固体力学    失效模式    有限元分析    加筋板    爆炸载荷
文章编号:1001-1455(2007)01-0026-08
修稿时间:2005-10-10

Study on failure mode of stiffened plate and optimized design of structure subjected to blast load
HOU Hai-liang,ZHU Xi,GU Mei-bang.Study on failure mode of stiffened plate and optimized design of structure subjected to blast load[J].Explosion and Shock Waves,2007,27(1):26-33.
Authors:HOU Hai-liang  ZHU Xi  GU Mei-bang
Affiliation:1.College of Naval Architecture and power, Naval University of Engineering, Wuhan 430033, Hubei, China;2.Naval Representative Office Stationed at 426 Factory, Dalian 116000, Liaoning, China
Abstract:In order to explore an optimization design method to design explosion protection stiffened plates, finite element modeling was carried out to simulate the response of clamped rectangle single stiffened plates subjected to blast load. Failure modes of the stiffened plates were analyzed. The influence of relative rigidity and intensity of the blast load was studied. The 3 types deformation modes of failure mode Ⅰ and 2 types of sub-failure mode of failure mode Ⅱ were put forward. The approximate formula to predict the largest deflection of stiffener and the stiffened plates and the criteria of the 2 failure modes were proposed. At last, the optimization design of single stiffened plates subjected to blast load was performed. The results show that it is feasible to optimize the structure of explosion protection stiffened plates, when the critical conditions of transformation from large plastic deformation (failure mode Ⅰ) to breakage damage (failure mode Ⅱ) are acquired by numerical simulation or experiment. The relationship between the mass of stiffened plates and the dimension and space of the stiffeners can be derived from these critical conditions, under the condition that the explosion protection capability of the stiffened plate is best. Thereby the optimization design of explosion protection stiffened plates can be achieved.
Keywords:solid mechanics  failure mode  finite element method  stiffened plate  blast load
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《爆炸与冲击》浏览原始摘要信息
点击此处可从《爆炸与冲击》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号