首页 | 官方网站   微博 | 高级检索  
     

拱形薄壳结构的减振降噪优化设计
引用本文:易桂莲,隋允康,杜家政.拱形薄壳结构的减振降噪优化设计[J].力学与实践,2010,32(6):33-38.
作者姓名:易桂莲  隋允康  杜家政
作者单位:北京工业大学机电学院
基金项目:国家自然科学基金,北京自然科学基金,大连理工大学工业装备结构分析国家重点实验室基金,校青基金
摘    要:基于拱形薄壳结构的动力仿真, 提出结构振动噪音最小、满足重量约束的约束阻尼厚度优化
设计模型. 利用K-S函数得到结构的振动加速度级, 将其作为结构减振降噪效果的评定参数,
采用响应面方法拟合目标函数, 并对其进行误差检验, 适当缩小设计变量范围调整
误差后, 响应面曲线的拟合程度较好. 最后采用二次规划方法求解模型, 经过优化设计, 结构第一阶固
有频率增加22.97%, 振动加速度级值减小12.96%, 结构的性能得到了很大提高.

关 键 词:减振降噪减振降噪  响应面  K-S函数  振动加速度级  
收稿时间:2010-03-22

OPTIMUM DESIGN OF THE ARCH THIN SHELL FOR VIBRATION AND NOISE REDUCTION
YI Guilian , SUI Yunkang , DU Jiazheng.OPTIMUM DESIGN OF THE ARCH THIN SHELL FOR VIBRATION AND NOISE REDUCTION[J].Mechanics and Engineering,2010,32(6):33-38.
Authors:YI Guilian  SUI Yunkang  DU Jiazheng
Abstract:Based on the dynamic simulation of the arch thin shell, an optimal design model for the thickness of the constraint damping layers is proposed for minimizing structural vibration and noise with the weight constraints. The K-S function is adopted to obtain the vibration acceleration level (VAL), which is used as the evaluation parameter to measure the reduction effect of vibration and noise. The response surface methodology (RSM) is used to fit the VAL. The error testing is used to find a better response surface curve fitting, whose fitting is more accurate by narrowing the scope of the variable appropriately to adjust the errors. After using the Quadratic Programming for the optimization model, the
first natual frequency of the structure is increased by 22.97{\%}, the VAL of the structure is reduced by 12.96{\%}, and  the whole structure sees a great improvement.
Keywords:reducing vibration and noise  the response surface methodology  K-S function  the vibration acceleration level
本文献已被 万方数据 等数据库收录!
点击此处可从《力学与实践》浏览原始摘要信息
点击此处可从《力学与实践》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号