首页 | 官方网站   微博 | 高级检索  
     

响应面法在结构参数灵敏度及可靠性分析中的应用
引用本文:陈学前,肖世富,刘信恩.响应面法在结构参数灵敏度及可靠性分析中的应用[J].力学与实践,2012,34(3):32-35.
作者姓名:陈学前  肖世富  刘信恩
作者单位:中国工程物理研究院总体工程研究所,四川绵阳 621900
基金项目:国家自然科学基金委员会-中国工程物理研究院联合基金NSAF,中国工程物理研究院重点基金
摘    要:采用Box-Behnken 矩阵设计方法进行试验设计,并根据设计点的响应,利用最小二乘回归法建立响应面函数. 将响应面函数中参数的梯度信息与其分散程度结合,得到各参数的灵敏度系数,再归一化灵敏度系数得到概率灵敏度;将响应面模型与一次二阶矩法相结合计算结构的可靠度. 针对一个具体算例,分别采用基于响应面法与基于ANSYS 的Monte Carlo 法计算了结构的灵敏度及可靠度值,结果的一致性验证了该方法的有效性.

关 键 词:响应面法  概率灵敏度  可靠性  
收稿时间:2011-11-14;

AN APPLICATION OF RESPONSE SURFACE METHOD TO STRUCTURAL PARAMETER SENSITIVITY AND RELIABILITY ANALYSIS
CHEN Xueqian,XIAO Shifu,LIU Xin'en.AN APPLICATION OF RESPONSE SURFACE METHOD TO STRUCTURAL PARAMETER SENSITIVITY AND RELIABILITY ANALYSIS[J].Mechanics and Engineering,2012,34(3):32-35.
Authors:CHEN Xueqian  XIAO Shifu  LIU Xin'en
Affiliation:Institute of Systems Engineering, CAEP, Sichun Mianyang 621900, China
Abstract:It is often necessary to study parameter sensitivity and structural reliability.The test design points of input-variables are obtained by the Box-Behnken matrix method in this paper.According to the responses of specimens,the coeffcients of the response surface function are identified by a least-squares regression.The steps of calculating probability sensitivity are as follows,firstly,computing the gradients of input-variables respectively,secondly,multiplying the gradient and the related range,and finally normalizing the above quantities.The structural reliability is analyzed by combining the response surface model and the first-order second-moment method.The sensitivity and the reliability of an example are analyzed by the response surface method and the Monte Carlo method in ANSYS.The results of two methods are consistent,which shows that the method in the paper is valid and feasible.
Keywords:response surface method  probability sensitivity  reliability
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《力学与实践》浏览原始摘要信息
点击此处可从《力学与实践》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号